Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Adhesive

NSN: 8040-01-375-2678 | Model: MAGNOBOND 6398 50GM

A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.

NSN Properties and Flags
NATO Stock Number
8040-01-375-2678
DEMIL
NO

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8040-01-375-2678 Datasheet

Supply Class (FSC):
Adhesives
Cross Reference:
  • MAGNOBOND 6398 50GM
Cage Codes:
  • Bell Helicopter Textron Inc. (CAGE 97499)
Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

U - Precious metal content is unknown

Questions & Answers:

What are the historical prices recorded for this stock number?
No pre-dated pricing for this NSN could be found.
Does NSN 8040-01-375-2678 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Norway, and Greece
What is the NIIN of NSN 8040-01-375-2678?
013752678 or 01-375-2678
Does NSN 8040-01-375-2678 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8040-01-375-2678?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
May 07, 1993
MSDS

Material Safety

MSDS CHXQW MAGNOBOND 6398, A

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: moderately irritating to skin
and eyes; possible skin sensitizer. Inhalation: not likely to
produce adverse effects due to low volatility. Ingestion: low order
of toxicity. Skin absorption: not lik ely to be absorbed through
skin in toxicamounts. Skin contact: moderately irritating; may cause
(efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: sensitization. Eye contact: moderately
irritating.

medical cond aggravated by exposure: pre-existing skin & eye disorders
may be aggravated.

First Aid

First aid: skin: remove contaminated clothing. Wash from skin w/soap &
water. Launder clothing prior to re-using. Eyes: flush w/water for
at least 15 minutes while holding eyelids open. Get medical
attention. Inha l: remove victim to fresh air. Administeroxygen if
necessary. Ingest: do not induce vomiting. Give large doses of
water. Get medical attention.

Chemical Properties

Boiling pt: b.P. Text: >225f,>107c
vapor pres: nil
vapor density: >1
spec gravity: 1.20 (h*2o=1)
evaporation rate & reference:
solubility in water: negligible
appearance and odor: gray paste.

percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids & bases.

stability condition to avoid: elevated temperatures.

hazardous decomposition products: oxides of carbon & nitrogen.

Proper Disposal

Waste disposal methods: cure, then bury or incinerate. Remove salvage
vessels to waste disposal site operating in compliance w/federal,
state & local regulations. Rcra: not considered to be a hazardous
waste.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: aluminum; (aluminum powder (dispersed in resin)) (sara
313)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 30-40%
osha pel: 15 mg/m3 dust
acgih tlv: 10 mg/m3 dust

ingred name: epoxy resins
fraction by wt: 55-65%
osha pel: n/k
acgih tlv: n/k

MSDS CHXQX MAGNOBOND 6398, B

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: vapors are irritating to skin
and eyes. Inhalation: vapors are irritating to skin and eyes.

ingestion: moderate toxicity; may cause burns of mouth and throat.

skin absorption: repeated or prolonged exposure may be harmful.

skin contact: may cause chemical burns and/or develop allergic skin
reaction. (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: eye contact: moderately irritating;
permanent damage possible on prolonged exposure. Amines: corrosive,
irritant. Chronic: unknown.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: skin: remove contaminated clothing. Wash from skin w/soap &
water. Launder clothing prior to re-using. Eyes: flush w/water for
at least 15 minutes while holding eyelids open. Get medical
attention. Inha l: remove victim to fresh air. Administeroxygen if
necessary. Ingest: do not induce vomiting. Give large doses of
water. Get medical attention.

Chemical Properties

Boiling pt: b.P. Text: >225f,>107c
vapor pres: nil
vapor density: >1
spec gravity: 1.20 (h*2o=1)
evaporation rate & reference:
solubility in water: negligible
appearance and odor: off-white paste.

percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids & bases.

stability condition to avoid: elevated temperatures.

hazardous decomposition products: oxides of carbon & nitrogen.

Proper Disposal

Waste disposal methods: cure, then bury or incinerate. Remove salvage
vessels to waste disposal site operating in compliance w/federal,
state & local regulations. Rcra: not considered to be a hazardous
waste.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: amines
fraction by wt: 90-95%
osha pel: n/k
acgih tlv: n/k