NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
The last inventory check on this NSN was done on 05/15/2023. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $315.66 to $526.10.. | |
| Does NSN 8040-01-389-6930 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Spain, Singapore, and Germany | |
| What is the NIIN of NSN 8040-01-389-6930? | |
| 013896930 or 01-389-6930 | |
| Does NSN 8040-01-389-6930 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-01-389-6930? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Apr 29, 1994 | |
Ld50 lc50 mixture: ld50 (oral rat, estimated) = >5 g/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: allergic skin reactions or primary
skin irritation may be produced by prolonged &/or repeated skin
contact w/eposy resins. Overexposure to vapor during heat curing
may cause irritation or injury of th e respiratory tract or eye
irritation.
explanation of carcinogenicity: manufacturer gave no information about
carcinogenicity. Hmis found no listing & does not expect it to be
carcinogenic.
effects of overexposure: eye, skin, respiratory irritation
medical cond aggravated by exposure: mfr gave no information of msds.
First aid: in case of skin contact immediately was affected areas w/soap
& plenty of water. Remove contaminated clothing & shoes. Get
immediate medical attention. Destroy or thoroughly clean shoes
before reuse. do not reuse contaminated clothing w/o laundering.
in case of eye contact, immediately irrigate w/plenty of water for
15 min.
Hcc: n1
nrc/state lic num: none
boiling pt: b.P. Text: n/a.
melt/freeze pt: m.P/f.P text: n/a.
decomp temp: decomp text: n/a.
vapor pres: 1 mm
vapor density: n/a.
spec gravity: 1.3
ph: n/a.
evaporation rate & reference: n/a.
solubility in water: negligible
appearance and odor: gray paste, odorless
percent volatiles by volume: n/a.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none nown
hazardous decomposition products: thermal decomosition or cimbustion may
produce carbon monoxide, carbon dioxide & nox.
conditions to avoid polymerization: avoid contact w/acids, oxidizing
agents, free radical initiators, basses or amines. Do not heat
>90f,32c.
Waste disposal methods: disposal must be i/a/w applicable federal, state
& local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aluminum (sara 313)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 40.58%
other rec limits: none recommended
osha pel: 15 mg/m3 dust
acgih tlv: 10 mg/m3 dust; 9495
ingred name: silicon dioxide (amorphous)
cas: 67762-90-7
fraction by wt: 2.9%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: fiberglass (fibrous glass)
cas: 65997-17-3
fraction by wt: 7.12+1%
other rec limits: none recommended
osha pel: 5 mg/m3 resp dust
acgih tlv: 10 mg/m3 (
ingred name: aniline derivative
fraction by wt: 10-30%
other rec limits: none recommended
ingred name: aromatic glycidyl
fraction by wt: 15-40%
other rec limits: none recommended
ingred name: fumed silica
cas: 68583-49-3
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral rat, estimated) = >5 g/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: warning! May cause allergic skin
reaction! allergic skin reactions or primary skin irritation may
be produced by prolonged &/or repeated skin contact.
explanation of carcinogenicity: manufacturer gave no information about
carcinogenicity. Hmis found no listing & does not expect it to be
carcinogenic.
effects of overexposure: eye, skin, respiratory irritation
medical cond aggravated by exposure: mfr gave no information of msds.
First aid: in case of skin contact immediately was affected areas w/soap
& plenty of water. Remove contaminated clothing & shoes. Get
immediate medical attention. Destroy or thoroughly clean shoes
before reuse. do not reuse contaminated clothing w/o laundering.
in case of eye contact, immediately irrigate w/plenty of water for
15 min.
Hcc: n1
nrc/state lic num: none
boiling pt: b.P. Text: n/a.
melt/freeze pt: m.P/f.P text: n/a.
decomp temp: decomp text: n/a.
vapor pres: 1 mm
vapor density: n/a.
spec gravity: 0.9
ph: n/a.
evaporation rate & reference: n/a.
solubility in water: negligible
appearance and odor: amber to red liquid, amine odor
percent volatiles by volume: n/a.
Stability indicator/materials to avoid: yes
strong oxidizing agent, mineral acids
stability condition to avoid: none nown
hazardous decomposition products: thermal decomosition or cimbustion may
produce carbon monoxide, carbon dioxide & nox.
conditions to avoid polymerization: will not occur.
Waste disposal methods: disposal must be i/a/w applicable federal, state
& local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 2,4,6-tris(dimethylamino methyl) phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: 8-13%
other rec limits: none recommended
ingred name: iron oxide
cas: 1309-37-1
rtecs #: no7400000
fraction by wt: 0.1-1%
other rec limits: none recommended
osha pel: 10 mg/m3 (fe)
acgih tlv: 5mg(fe)/m3fume,b2;95
ingred name: amine terminated polymer
fraction by wt: 15-40%
other rec limits: none recommended
ingred name: polyamide
fraction by wt: 60-100%
other rec limits: none recommended
Ld50 lc50 mixture: *
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause allergic skin raction.
First aid: skin: wash w/soap & water. Remove contam clothes/shoes. Get
med aid. Destroy/thoroughly clean shoes before reuse. Wash contam
clothes before reuse. Eye: irrigate w/water 15 minutes. Inhal:
remove to f reshair.
Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
vapor pres: 1.0 @ 20c
vapor density: na
spec gravity: 0.9
ph: na
evaporation rate & reference: na
solubility in water: insoluble
appearance and odor: amber to red liquid, amine odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, mineral acids.
hazardous decomposition products: carbon mononixde, carbon dioxide,
oxides of nitrogen.
conditions to avoid polymerization: avoid contact w/acids, oxidizing
agents, free radical initiators, bases or amines. Dont heat >40f.
Waste disposal methods: recycle if possible. Dispose of by incineration
at epa facilities.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 2,4,6-tris(dimethylamino methyl) phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: 12.8%
other rec limits: none recommended
ingred name: ferric oxide
cas: 1309-37-1
rtecs #: no7400000
fraction by wt: 0-1-1.0%
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 5 mg/m3
ingred name: amine terminated polymer
fraction by wt: 15-40%
other rec limits: none recommended
ingred name: polyamide
cas: 68082-29-1
fraction by wt: 60-100%
other rec limits: none recommended
Ld50 lc50 mixture: *
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: irritation. Inhal: irritation,
injury to respiratory tract. Eye: irritation.
First aid: skin: wash w/soap & water., remove contam clothing/shoes, get
med aid. Was contam clothes/shoes before reuse. Eye: irrigate
w/water 15 minutes. Inhal: remove to fresh air.
Boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
decomp temp: decomp text: na
vapor pres: 1.0 @ 20c
vapor density: na
spec gravity: 1.3
ph: na
evaporation rate & reference: na
appearance and odor: gray paste, odorless.
percent volatiles by volume: na
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of nitrogen.
conditions to avoid polymerization: contact w/acids, oxidizing agents,
free radical initiators, bases, amines. Do not heat >90f.
Waste disposal methods: recycle if possible. Dispose of by incineration
at epa facilities.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aluminum (sara 313)
cas: 7429-90-5
rtecs #: bd0330000
fraction by wt: 40.58%
other rec limits: none recommended
osha pel: 15 mg/m3/ resp 5
acgih tlv: 10 mg/m3
ingred name: fumed silica
cas: 67782-90-7
fraction by wt: 2.9%
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: fiberglass
fraction by wt: 7.12%
other rec limits: none recommended
acgih tlv: 10 mg/m3
ingred name: glass oxide
cas: 65997-17-3
fraction by wt: 1.0%
other rec limits: none recommended
acgih tlv: 10 mg/m3
ingred name: aniline derivative (sara 302/313) (cercla)
cas: 62-53-3
rtecs #: bw6650000
fraction by wt: 10-30%
other rec limits: none recommended
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: aromatic glycidyl derivative
fraction by wt: 15-40%
other rec limits: none recommended