Worldwide distributor of NSN parts and consumables located in the USA.
A petroleum oil prepared principally for lubrication in piston type aircraft engines.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Aviation engine lubricating oils (except jet engine lubricating oils)
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $52.57 to $87.62.. | |
Does NSN 9150-00-019-5701 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, Department Of The Navy, Federal Aviation Administration, U.s. Coast Guard, Spain, and Turkey | |
What is the NIIN of NSN 9150-00-019-5701? | |
000195701 or 00-019-5701 | |
Does NSN 9150-00-019-5701 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-019-5701? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Apr 29, 1967 |
Ld50 lc50 mixture: >5g/kg (oral rat); practically non-toxic
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: minimally irritating to eyes, skin &
respiratory tract (as mist).
explanation of carcinogenicity: only used motor oils were shown to cause
skin cancer when tested on mice.
effects of overexposure: irritation to eyes, skin or mucous membranes.
medical cond aggravated by exposure: skin disorders
First aid: eyes: flush eyes with large amounts of water for 15 minutes.
get medical attention if irritation persists. Skin: wash with soap
& water. Inhalation: remove from area of mist or vapor. Ingestion:
do no t induce vomiting.
Hcc: v6
spec gravity: 0.901
solubility in water: negligible
appearance and odor: clear oil, mild petroleum odor
Stability indicator/materials to avoid: yes
none specified by manufacturer.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: toxic fume emitted upon combustion.
Waste disposal methods: recycle or incinerate in accordance with all
local, state and federal applicable regulations and laws.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil
fraction by wt: 90-95%
acgih tlv: 5 mg/cum (mist)
ingred name: additive package containing: sulfur, nitrogen
fraction by wt: 5-10%
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- may cause pulmonary irritation,
dizziness and nausea. May cause various skin disorders such as
dermatitis. May cause eye irritation. Chronic- may cause
dermatitis.
effects of overexposure: may cause pulmonary irritation, dizziness and
nausea. May cause various skin disorders such as dermatitis. May
cause eye irritation.
medical cond aggravated by exposure: pre-existing skin disorders may be
more susceptible to this material.
First aid: get medical attention if symptoms persist. Skin: wash with
soap & water. Eye: flush with water for 15 minutes, holding eyelids
open. Inhaled: remove to fresh air. Provide oxygen/cpr if needed.
oral: do no t induce vomiting. Keep at rest. Get prompt medical
attention.
Hcc: v6
boiling pt: b.P. Text: 680f,360c
spec gravity: 1.1
solubility in water: negligible
appearance and odor: dark liquid,oily odor
Stability indicator/materials to avoid: yes
stability condition to avoid: heat, ignition sources
hazardous decomposition products: oxides of carbon
Waste disposal methods: dispose of in accordance with all local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum oil(type not specified)
ingred name: additive(type not specified)
ingred name: dispersing agent, per specification (type not specified)
ingred name: additive package
fraction by wt: < 5%
other rec limits: none recommended
Ld50 lc50 mixture: tlv: 5 mg/m3
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: effects of overexposure: no
significant effects expected.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: flush thoroughly with water. Call physician for
irritation. Skin: wash contact areas with soap & water. Inhal: remove
from futher exposure. Call physician. If breathing has stopped, use
mouth to mou th resuscitation. Ingest: not expected to be prob.
however, if >1/2 liter(pint) ingested, immediately give 1-2 glasses
of water & call a physician. Do not induce vomiting or give
anything if unconsious
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.882
viscosity: 122 cs
solubility in water: negligible
appearance and odor: brown liquid. Mild odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: extreme heat.
hazardous decomposition products: carbon monoxide.
Waste disposal methods: product is suitable for burning in enclosed,
controlled burner for fuel value/disposal by supervised
incineration. Such burning may be limited pursuant to rcra. In
addition, product is suitable for pr ocessing by approved recycling
facility.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: >95%
other rec limits: none recommended
acgih tlv: 5 mg/m3 (oil mist)
ingred name: acrylate polymer
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is >2000 mg/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no significant effects expected. Emay
cause mild eye irritation.
explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: mild eye irritation.
medical cond aggravated by exposure: none
First aid: ingest: do not induce vomiting. Get medical attention. Skin:
flush with soap & water. Remove and launder contaminated clothing.
eye: flush with plenty of water for atleast 15 minutes. Get medical
atte ntion. Inhale: remove to fresh air.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.882
viscosity: 122 cs @40c
solubility in water: insoluble
appearance and odor: prown liquid, mild odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide
Waste disposal methods: incinerate, recycle or otherwise manage in a
permitted waste management facility in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: >95.0%
other rec limits: none recommended
acgih tlv: 5 mg/m3 (oil mist)
ingred name: solvent,dewaxed residual oil (petroleum)
cas: 64742-62-7
other rec limits: none recommended
ingred name: acrylate polymer
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: based on component information
product is no more than minimally irritating to the eyes. Skin:
based on component information product is no more than minimally
irritating to the skin. Prolonged a nd repeated contact can result
in various skin disorders such as dermatitis, folliculitis or oil
acne. Inhalation: inhalation of vapors (generated at high
temperatures only) or oil mist from this prod uct may cause mild
irritation of the upper respiratory tract. Ingestion: based on
component information this product is no more than slightly toxic
if swallowed.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by international agency for research on
cancer (iarc), national toxicology program (ntp), or occupational
safety and health administra tion (osha).
effects of overexposure: irritation as noted above
medical cond aggravated by exposure: preexisting skin and respiratory
disorders may be aggravated by exposure to this product.
First aid: eyes: flush with plenty of water for 15 min while holding
eyelids open. skin: remove contaminated clothing & wipe excess
from skin. Flush with water. Follow by washing with soap & water.
inhalation: remove victim to fresh air & provide oxygen if needed.
ingestion: do not induce vomiting. If vomiting occurs
spontaneously, keep head below hips to prevent aspiration of liquid
into lungs. get medi cal attention for all routes of exposure as
needed.
Hcc: v5
boiling pt: b.P. Text: not available
melt/freeze pt: =-32.6c, -27.F
m.P/f.P text: (pour point)
decomp temp: decomp text: not provided by mfr
vapor pres: < 0.1 (mm hg)
vapor density: not availa
spec gravity: 0.8855 (h20=1)
ph: not provided
viscosity: 14.5 (cs @ 212 deg f)
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: pale orange oil. Slight hydrocarbon odor
percent volatiles by volume: not provided
corrosion rate: not provided by mfr
Stability indicator/materials to avoid: yes
oxidizing materials
stability condition to avoid: avoid heat, open flames
hazardous decomposition products: thermal decomposition products are
highly dependent on the combustion conditions. Carbon monoxide &
other unidentified organic compounds may be found upon conbustion.
conditions to avoid polymerization: will not occur
Waste disposal methods: if this product becomes a waste, it would not be
a hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local regulations.
Ingred name: highly refined petroleum oils ( may contain: 64742-54-7,
64742-57-0)
> wt: 95.
ingred name: additives
minumum % wt: 3.
maxumum % wt: 5.