Worldwide distributor of NSN parts and consumables located in the USA.
A fluid designed to reduce the amplitude of motion in order to obtain stable readings on indicators.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
145000 - Oil o/t petro lubricating noi
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $126.68 to $211.14.. | |
Does NSN 9150-00-024-9623 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Poland, Bulgaria, Spain, Singapore, Kuwait, Canada, Republic Of Korea, Portugal, Italy, Greece, and Turkey | |
What is the NIIN of NSN 9150-00-024-9623? | |
000249623 or 00-024-9623 | |
Does NSN 9150-00-024-9623 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-024-9623? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Ld50 lc50 mixture: ld50 oral rat is > 40000 mg/kg
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: may cause mild irritation.
chronic: none known.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: may cause mild eye irritation. No other effects
known by manufacturer.
medical cond aggravated by exposure: none known
First aid: eyes: flush with plenty of water for at least 15 minutes and
get medical attention if irritation persists. Skin: wash with soap
and water. Inhalation: none known. Ingestion: none known. Note to
physic ian: none known.
Hcc: v6
boiling pt: b.P. Text: >400f,>204c
vapor pres: neg.
vapor density: neg.
spec gravity: 0.97
evaporation rate & reference: negl.(butyl acetate = 1)
solubility in water: insoluble
appearance and odor: clear, odorless liquid
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known
stability condition to avoid: none known
hazardous decomposition products: carbon monoxide, carbon dioxide,
formaldehyde
conditions to avoid polymerization: will not occur.
Waste disposal methods: disposal should be made in accordance with
local, state and federal regulations. incineration is recommended
in approved incineratior according to federal, state, and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non-hazardous ingredients (inert)
fraction by wt: 1-20%
other rec limits: none specified
ingred name: dimethylpolysiloxanes
cas: 63148-62-9
rtecs #: jt6484500
fraction by wt: 80-99%
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: yes
health hazards acute and chronic: eyes: causes mild transient discomfor
similar to windburn. Skin: non-irritating to intact or abraded
skin; skin absorption: not absorbed. Inhalation: tlv not
established, paste-like product not likel y to inhale. Ingestion:
animal tests suggests very low toxicity.
effects of overexposure: none stated. Not likely to inhale. May cause
mild discomfort on eye contact.
medical cond aggravated by exposure: none stated.
First aid: inhal: rmv to fresh air. If not brthng give cpr; if brthng
diff give oxygen. Eye: immed flush w/plenty of water. Skin: wash
w/soap&water. Rmv contam clthg&shoes. Ingest: induce vomit. Rpt
until vomit is c lear. Nothg by mouth if unconsc. Get medical attn.
Hcc: v6
melt/freeze pt: m.P/f.P text: -65f/-53.9c
vapor pres: 0.01
spec gravity: 0.97
ph: 7
viscosity: 1000 cst
solubility in water: insoluble
appearance and odor: clear, colorless paste-like polymer.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
mineral acids; strong bases.
stability condition to avoid: extremely high temperatures
hazardous decomposition products: oxides of carbon and silica may be
emitted on combustion.
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethylsiloxane
cas: 9016-00-6
rtecs #: tq2690000
fraction by wt: 100%
Effects of overexposure: may cause skin/eye irrit
First aid: eye: flush eyes w/copious amts water. Skin: wash w/soap &
water. Ingest: induce vomit. Inh: remove to fresh air.
Hcc: v6
boiling pt: b.P. Text: >300f
spec gravity: 0.970
solubility in water: negligible
appearance and odor: clear odorless liq
Stability indicator/materials to avoid: yes
hazardous decomposition products: sio*2, co*2, traces of incomp burned
carbon prod
Waste disposal methods: landfill or incinerate iaw all local, state, fed
reg
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dimethyl siloxane
rtecs #: vw3370000
ingred name: dimethyl siloxane
rtecs #: vw3380000
Ld50 lc50 mixture: not specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: none specified by manufacturer.
explanation of carcinogenicity: product contains no materials currently
classified as carcinogenic by ntp, iarc or osha.
effects of overexposure: per mfr: nontoxic, nonirritating; may irritate
eyes and skin mildly.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhalation: remove to fresh air, give cpr/oxygen as need;
eyes/skin: flush with large amounts of water for 15 minutes;
ingestion: rinse mouth; get medical attention for eyes, breathing
difficulty, or other symptoms of overexposure.
Hcc: v6
melt/freeze pt: m.P/f.P text: not given
decomp temp: decomp text: not given
vapor pres:
spec gravity: 0.965
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: clear,colorless,odorless liquid
percent volatiles by volume: neg
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none specified
hazardous decomposition products: may give off carbon monoxide and/or
carbon dioxide
Waste disposal methods: incinerate or dispose of collected material in
accordance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethylsiloxane
cas: 9016-00-6
rtecs #: tq2690000
fraction by wt: 100%
acgih tlv: not specified
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-direct contact may cause temporary
discomfort. Skin-a single prolonged exposure causes no known
adverse effects. Inhalation-no irritation to eyes & respiratory
passage. No injury is likely. Oral-s mall amounts transferred to
the mouth by fingers during use, etc., should not injure.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: eye-direct contact may cause redness and
dryness similiar to wind burns. Oral-swallowing large amounts may
cause digestive discomfort.
medical cond aggravated by exposure: this product as with any chemical,
may enhance allergic conditions on certain people. We do not know
of any conditions that might be aggravated by exposure to this
product.
First aid: eye: flush immediately with water. Skin: wipe off and flush
with water. Inhalation: no first aid should be needed. Ingestion:
no first aid should be needed.
Hcc: v6
vapor pres:
spec gravity: 0.98
solubility in water:
appearance and odor: very little odor, liquid, no color.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
hazardous decomposition products: silicon dioxide, carbon dioxide, and
traces of incompletely burned carbon products.
Waste disposal methods: dow corning suggests that all local, state &
federal regulations concerning health & pollution be reviewed to
determine approved disposal procedures. Contact dow corning if
there are any disposal ques tions.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingredient
fraction by wt: 100%
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50: >40000 mg/kg.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingest/skin/inhal: none known. Eye
contact: may cause mild eye irritation.
explanation of carcinogenicity: per msds: product/one of its ingreds
present 0.1% or more not listed as carcinogen/suspected carcinogen
by ntp/osha/iarc.
effects of overexposure: mild eye irritation.
medical cond aggravated by exposure: none known. Target organs: none
known.
First aid: inhal/ingest: none known. Skin: wash w/soap/water. Eyes: immed
flush w/plenty of water for @least 15mins.Get med attn if irrit
persists.
Hcc: v6
boiling pt: b.P. Text: >399f,>204c
vapor pres: negligible
spec gravity: 0.97
evaporation rate & reference:
solubility in water: insoluble @20c.
appearance and odor: liquid, odorless, clear.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: carbon monoxide, carbon dioxide,
formaldehyde.
Waste disposal methods: disposal should be made in accordance with
local, state and federal regulations.Incineration recommended in
approved incinerator according to local, state and federal
regulations. Sara 313 chem: none.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 80-99%
other rec limits: none recommended
ingred name: hazardous chemical none found per msds.
rtecs #: 9999999zz
other rec limits: none recommended
ingred name: volitile organic content as listed on msds, epa method 24,
rtecs #: 9999999vc
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) is >5,000 mg/kg.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes. Acute-
eyes: non-irritating. May cause foreign body irritation only.
skin: non-irritating. Low acute dermal toxicity. Inhale: not likely.
oral: low acute oral toxicity. Chronic- unknow n.
explanation of carcinogenicity: may generate formaldehyde as a byproduct
of oxidative thermal decomposition. Formaldehyde is human
carcinogen.
effects of overexposure: slight eye irritation, discomfort, tearing,
redness
medical cond aggravated by exposure: individuals with pre-existing eye
disorders may be more succeptible to the effects from exposure to
this product.
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes, holding eyelids open.
skin: wash with soap & water. Oral: if conscious, drink 1-2 glasses
of wate r. Get medical attention. Never give anything by mouth to
an unconscious person. Do not leave victim unattended. Treat
symptomatically.
Hcc: v6
nrc/state lic num: not relevant
melt/freeze pt: m.P/f.P text: -65f,-54c
decomp temp: decomp text: 300f,149c
vapor pres:
spec gravity: >0.96
solubility in water: insoluble
appearance and odor: clear, viscous liquid - odorless
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids, strong bases
stability condition to avoid: excessive heat (300f/149c), open flame,
sparks
hazardous decomposition products: dimethylcyclosiloxanes,
methylphenylcyclosiloxanes, formaldehyde, carbon monoxide, carbon
dioxide, silica (crystalline)
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: direct eye contact may cause
temproary discomfort with mild redness and dryness similar to
windburn. Skin: a single prolonged exposure (24 to 48 hours) causes
no known adverse effect. Inhalation: no irritation to eyes and
respiratory passages. No injury is likely from relatively short
exposures (efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: of less than 8 hours. Ingestion:
small amounts transferred to the mouth by fingers during use, etc,
should not injure. Swallowing large amounts may cause digestive
discomfort. Repeated expos ure effects: none known. When heated
totemperatures above 150c in the presence of air, product can form
(supdat)
medical cond aggravated by exposure: none specified by manufacturer.
First aid: ingest: call md immediately . Inhal: remove to fresh air.
support breathing (give oxygen/artificial respiration) . Skin:
flush w/copious amounts of water. Call md . Eye: immediately flush
with water for at least 15 minutes. Comments: treat
symptomatically.
Hcc: v6
spec gravity: 0.97
solubility in water: none
appearance and odor: colorless liquid; odorless.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: none.
hazardous decomposition products: none specified by manufacturer.
Waste disposal methods: disposal of collected product, residues and
cleanup materials may be governmentally regulated. Observe all
applicable local, state and federal waste management regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dow corning 200 fluid; (polydimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
fraction by wt: 100%
osha pel: n/k
acgih tlv: n/k
ingred name: supdat: the above listed potential effects of overexposure
are based on actual data, results of studies performed(ing 3)
rtecs #: 9999999zz
ingred name: ing 2: upon similar compositions component data and/or
expert review of the product.
rtecs #: 9999999zz
ingred name: spill proc: such as: several moppings or swabbing
w/appropriate solvents; washing w/mild, caustic detergents or (ing
5)
rtecs #: 9999999zz
ingred name: ing 4: solutions; or high pressure steam for large areas.
for nonsilicones, use typical industrial cleaning (ing 6)
rtecs #: 9999999zz
ingred name: ing 5: materials. Observe any safety precautions applicable
to the cleaning material being used. Observe all (ing 7)
rtecs #: 9999999zz
ingred name: ing 6: personal protection equipment recommendations.
local, state and federal reporting requirements may apply (ing 8)
rtecs #: 9999999zz
ingred name: ing 7: to spills or releases of this material into the
environment. Personal protective equipment for spills: (ing 9)
rtecs #: 9999999zz
ingred name: ing 8: use proper eye protection - safety glasses as
minimum. Washing at mealtime and end of shift is adequate. (ing 10)
rtecs #: 9999999zz
ingred name: ing 9: no respiratory protection should be needed. Avoid
eye contact. Use reasonable care. These precautions (ing 11)
rtecs #: 9999999zz
ingred name: ing 10: are for room temperature handling. Use at elevated
temperature or aerosol/spray applications, may (ing 12)
rtecs #: 9999999zz
ingred name: ing 11: require added precautions.
rtecs #: 9999999zz
Ld50 lc50 mixture: no data provided by manufacturer
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: based on currently available data,
this product does not meet the osha definition of a hazardous
substance.
explanation of carcinogenicity: this product does not contain any
ingredient designated by iarc, ntp, acgih, or osha as a possible
human carcinogen.
effects of overexposure: no data provided by manufacturer
medical cond aggravated by exposure: no data provided by manufacturer
First aid: eyes: in case of contact, wipe off excess with a clean gauze
pad or cottom & then flush with plenty of water for at least 15
minutes using an eyewash fountain. Lift lids & rinse well under
them. Get m edical attention if irritation develops or persists.
skin: wipe off excess with a clean cloth & then wash with soap &
plenty of water. Get medical attention if irritation developls or
perists. Inhalat ion: seek medical attention if inhalation should
occur. Ingestion: if swallowed & victim is fully conscious, induce
vomiting. Get immediate medical attention.
Hcc: v5
melt/freeze pt: =18.3c, 65.F
vapor pres: 0.01 @392f
vapor density: na
spec gravity: 0.96 @ 25c
viscosity: 50 cs to 2,500,000
evaporation rate & reference: na (butyl acetate=1)
solubility in water: insoluble
appearance and odor: clear, viscous liquid, odorless
Stability indicator/materials to avoid: yes
strong acids, strong bases and stron oxidizing materials..
stability condition to avoid: avoid heat and open flame.
hazardous decomposition products: on combustion, silica and oxides of
carbon are emitted.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
Ingred name: polydimethylsiloxane (msds lists cas# 63148-63-9 which
invalid)
cas: 63148-62-9
rtecs #: jt6484500
= wt: 100.