NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
090960 - Lubricating grease noi
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - 65.0
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 9150-00-053-0101 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Spain, and Germany | |
| What is the NIIN of NSN 9150-00-053-0101? | |
| 000530101 or 00-053-0101 | |
| Does NSN 9150-00-053-0101 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-053-0101? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| May 23, 1967 | |
Effects of overexposure: may irritate eyes
First aid: flush affected areas with water.
Hcc: v6
boiling pt: b.P. Text: >300f;>149c
vapor pres:
spec gravity: 4.8
evaporation rate & reference:
solubility in water: negligible
appearance and odor: powder,very little odor.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known
hazardous decomposition products: sulfur products, molybdenum oxide
Waste disposal methods: dispose in full accord with applicable
international,federal,state, & local regulations.Mfg notes that
land fill disposal is usually acceptable.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 100%
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
Ld50 lc50 mixture: oral ld50 (rat) is unknown.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: can cause irritation, redness,
blurred vision. Skin: prolonged contact can cause irritation,
dermatitis. Inhalation: can cause irritation, dizziness, nausea,
fatigue, headache, unconsciousness o r asphyxiation. Ingestion: can
cause gastrointestinal irritation, nausea, vomiting, and diarrhea.
effects of overexposure: eyes: irritation, redness, blurred vision.
skin; irritation, dermatitis. Inhalation: irritation, dizziness,
nausea, fatigue, headache, unconsciousness, asphyxiation.
ingestion: gastrointestinal irrita tion, nausea, vomiting, and
diarrhea.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with large amounts of water. Get medical
attention. Skin: wash area with soap and water. Inhalation: move to
fresh air. If breathing impaired, get medical attention. Ingestion:
do not indu ce vomiting. Keep warm. Get medical attention.
Hcc: v6
spec gravity: 40 lbs/gal
solubility in water: insoluble
appearance and odor: gray/black powder.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: irritating and/or toxic fumes
including sulfur oxides may be released.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations. Manufacturer recommends disposing of waste
in a chemical landfill if permitted.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
other rec limits: none specified
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 9192