Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of industrial types of equipment by means of cups, grease fittings, or pressure lubricating systems. If special characteristics are required, see specific item names.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
090960 - Lubricating grease noi
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $152.60 to $254.34.. | |
Does NSN 9150-00-068-6268 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Air Force, Department Of The Navy, National Weather Service, National Aeronautics and Space Administration, Austria, Spain, Germany, Republic Of Korea, and Portugal | |
What is the NIIN of NSN 9150-00-068-6268? | |
000686268 or 00-068-6268 | |
Does NSN 9150-00-068-6268 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-068-6268? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: may be mildly irritating.
skin: release during high pressure usage may result in injection of
oil into the skin causing local necrosis. Ingestion- high
temperature vapors irritate respirator y tract. Ingestion: mild
stomach distress. Chronic: skin disorders.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: eyes: redness, tearng. Skin: redness, rash.
ingestion: nausea, vomiting.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
boiling pt: b.P. Text: >550f,>288c
vapor pres:
vapor density: >5
spec gravity: 0.97
evaporation rate & reference:
solubility in water: negligible
appearance and odor: smooth, tan grease with mineral oil odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, unspecified
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: 100 ppm
ingred name: additives
other rec limits: none specified
ingred name: thickener
other rec limits: none specified
Ld50 lc50 mixture: not provided
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: effects of overexposure: prolonged or
repeated skin contact may cause skin irritation. Product entering
the eyes may cause eye irritation. Human health risks vary from
person to person. As a precautio n, exposure to liquids, vapors,
mists and fumes should be minimized. This product has a low order
of acute oral toxicity, but minute amounts aspirated into the lungs
during ingestion may cause mild to severe pulmonary injury.
explanation of carcinogenicity: none
effects of overexposure: prolonged or repeated skin contact may cause
skin irritation. Product entering the eyes may cause eye
irritation.
medical cond aggravated by exposure: not provided
First aid: eye contact: flush with clear water for 15 minutes or until
irritation subsides. If irritation persists, consult a physician.
skin contact: remove any contaminated clothing and wash with soap
and wate r. If injected by high pressure under skin, regardless of
appearance or its size, contact a physician immediately. Delay may
cause loss of affected part of the body. Inhalation: vapor pressure
is very low and inhalation at room temperatue is not a problem. If
overcome by vapor from hot product, immediately remove from
exposure and call a physician. Ingestion: if ingested, call a
physician immedia tely. Do not induce vomiting.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: >287.8c, 550.F
melt/freeze pt: m.P/f.P text: semi-solid
decomp temp: decomp text: not provided
vapor pres:
vapor density: >5(air=1)
spec gravity: 0.884(h20=1)
viscosity: not provided
evaporation rate & reference:
solubility in water: negligible
appearance and odor: smooth, off-white grease with mineral oil odor.
corrosion rate: not provided
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants like liquid chlorine, concentrated
oxygen.
stability condition to avoid: not available
hazardous decomposition products: if incomplete combustion, carbon
monoxide.
Waste disposal methods: assure conformity with applicable disposal
regulations. dispose of absorbed material at an approved waste
disposal facility or site.
Ingred name: lithium soap
other rec limits: none recommended
ingred name: mineral oil
other rec limits: not provided
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additives
other rec limits: none recommended
Ld50 lc50 mixture: not provided
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged or repeated skin contact may
cause skin irritation. Product contacting the eyes may cause eye
irritation. Human health risks vary from person to person. As a
precaution, exposure to liquids, vapors, mists and fumes should be
minimized. This product has a low order of toxicity, but minute
amounts aspired into the lungs during ingestion may cause mild to
severe pulmonary injury
explanation of carcinogenicity: none
effects of overexposure: prolonged or repeated skin contact may cause
skin irritation. Product contacting the eyes may cause eye
irritation.
medical cond aggravated by exposure: not provided
First aid: eye: flush with clear water for 15 minutes or until
irritation subsides. If irritation persists, consult a physician.
skin: remove any contaminated clothing and wash with soap and warm
water. If injec ted by high pressure under skin, regardless of the
appearnce or its size, contact a physician immediately. Dely may
cause loss of affected part of the body. Inhalation: vapor pressure
is very low and inhalation at room temperature is not a problem.
if overcome by vapor from hot product, immediately remove from
exposure and call a physician. Ingestion: if ingested, call a
physician immediately. Do not induce vomiting.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: >287.8c, 550.F
melt/freeze pt: m.P/f.P text: semi-solid
decomp temp: decomp text: not provided
vapor pres: < 0.01 (mm hg)
vapor density: > 5(air=1)
spec gravity: 0.884 (h20=1)
evaporation rate & reference: < 0.01 (butyl acetate=1)
solubility in water: negligible
appearance and odor: smooth, off-white grease with mineral oil odor
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants like liquid chlorine, comcentrated
oxygen.
hazardous decomposition products: may form so2. If incomplete
combustion, carbon monoxide.
Waste disposal methods: assure conformity with applicalbe disposal
regulations. Dispose of absorbed material at an approved waste
disposal facility or site
Ingred name: non-hazardous (lithium soap, mineral oil, additives)
= wt: 100.
other rec limits: not provided
osha pel: not provided
acgih tlv: 5 mg/m3 (oil mist)