NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A liquid used to lubricate and cool cutting tools in the machining of metals. It usually consists of mineral or fatty oils, mixtures thereof, or emulsifiable oils. It may contain additives, such as sulfur, chlorine or phosphorus compounds, emulsions composed of a mixture of oil, emulsifiers and water, colloidal suspensions of surfactants, wetting agents and rust inhibitors, or aqueous solutions composed of surfactants, nitrites salts, and organic amines.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Quenching or cutting oils
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| No pre-dated pricing for this NSN could be found. | |
| Does NSN 9150-00-068-7864 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Bureau Of Engraving and Printing | |
| What is the NIIN of NSN 9150-00-068-7864? | |
| 000687864 or 00-068-7864 | |
| Does NSN 9150-00-068-7864 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-068-7864? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1963 | |
Ld50 lc50 mixture: skin: ld50 15,000 mg/kg (rabbits)
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhal: 500-1000 ppm: minimal
anesth/narctc eff.Lvl over 1000 ppm: may cause dizz,drunk.10,000 ppm
conc: uncon + death.Confine/poor vent areas vapors accum can cuase
uncon + death.High lvl may also cause c ardiac
arrhythmias.Skin: single prlng expos not likely to cause absorp of
harmful amt.Ingest: single dose (see overexpos)
explanation of carcinogenicity: does not cause cancer in long term
animal studies. Not a carcinogen of suspect carcinogen (mfr).
effects of overexposure: toxic low.Ld50 >10,000 mg/kg(rat).If aspirated
may be rapid absorb through lungs + injure other body sys.Eye: may
cause pain + irrit w/transient corneal injury.
chronic: skin: rptd/prlng expos may cause defat of skin +
rash/irrit.Base on avail data,rptd expos not anticipate to cause
any significant adverse eff.(sup dat)
medical cond aggravated by exposure: n/k
First aid: eye: flush gently w/h*2o for at least 15 min.Support trtmt by
md recm.Skin: wash w/mild soap + h*2o.Rmv wet clthg until dry.
inhal: rmv to fresh air.Indv w/pronounced anesth effect may require
artf resp + o*2.Epinephrine + other drugs w/sim activity should
not be admin.Ingestion: do not induce vomit.Call md and/or transport
to emergency facility immediately.
Hcc: t4
boiling pt: b.P. Text: 158-190f
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: 100
vapor density: 4.55
spec gravity: 1.35
evaporation rate & reference: 0.6 gal/sq ft/day at 77f
solubility in water: 0.07% by weight
appearance and odor: amber liquid,aromatic odor.Non aqueous.
percent volatiles by volume: >90
corrosion rate:
Stability indicator/materials to avoid: yes
mg + al are attacked at elev temp.Polystyrene,cellulose acetate
propionate + polycarbonate plstc dislvd.Swells rubber.
stability condition to avoid: prolonged storage in cont w/h*20 may cause
some decomp + form of hcl (when store temp abv 150f.Thrm decomp at
325c, 620f
hazardous decomposition products: hcl,phosgene .When exp to open
flames(weld torches)/high energy arcs,prod may decompose yielding
hcl gas.
conditions to avoid polymerization: conditions contributing to hazardous
polymerization: none.
Waste disposal methods: dspl must be in a/w fed,state + lcl reg .Very sm
amt may be evap in compliance w/local,state +fed reg.Large
quantities may be sent to licensed reclaimer/permitted
incinerators.Never dump into se wers, on the ground or into any
body ofwater.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl chloroform (1,1,1-trichloroehane) (sara iii)
cas: 71-55-6
rtecs #: kj2975000
fraction by wt: 90% max
other rec limits: stel-450
osha pel: 350 ppm/450 stel
acgih tlv: 350 ppm/450stel;9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ozone depleting chemical: 1
ingred name: tert-butyl alcohol (sara iii)
cas: 75-65-0
rtecs #: eo1925000
fraction by wt: 3% max
other rec limits: stel-150
osha pel: 100 ppm
acgih tlv: 100ppm 9394
ingred name: 1,2-butylene oxide (sara iii)
cas: 106-88-7
rtecs #: ek3675000
fraction by wt: 3% max
other rec limits: est stel-100
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: methylal (dimethoxymethane)
cas: 109-87-5
rtecs #: pa8750000
fraction by wt: 3% max
other rec limits: stel-1250
osha pel: 1000 ppm
acgih tlv: 1000 ppm; 9192
ingred name: petroleum oil, aliphatic
cas: 68815-10-1
fraction by wt: 3% max
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k
ingred name: vegetable oil, essential (cinnamaldehyde)
cas: 104-55-2
rtecs #: gd6475000
fraction by wt: 3% max
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k