Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Engine Lubricating Oil

NSN: 9150-00-111-0208 | Model: MIL-PRF-21260

A petroleum oil, a synthetically prepared product, or a combination thereof, prepared primarily for lubrication in crank cases of internal combustion engines. It usually contains additives for corrosion prevention and oxidation prevention, and may contain detergents. See also lubricating oil, general purpose. It does not include lubricating oil, aircraft piston engine.

NSN Properties and Flags
NATO Stock Number
9150-00-111-0208
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Any acceptable
Service Characteristics
Any acceptable
Quantity Within Each Unit Package
55.000 gallons
Viscosity At Rated Temp
5.60 100 degrees c and 7.40 100 degrees c
Maximum Pour Point
-26.0 degrees fahrenheit
Minimum Flash Point And Test Method
401.0 degrees fahrenheit cleveland open cup
Nondefinitive Specification/std Data
10 grade

Inventory Check

The last inventory check on this NSN was done on 10/23/2023. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 3
  • New Surplus: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-111-0208 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • MIL-PRF-21260
  • MIL-L-21260
Cage Codes:
  • Military Specifications (CAGE 81349)
Replacements:
  • 9150-00-111-0208 replaces 9150-00-111-3200
  • 9150-00-111-0208 replaces 9150-00-264-3942
  • 9150-00-111-0208 replaces 9150-00-436-5291
Schedule B & Trade:
  • Schedule B: 2710193020 (NAICS 324110)

    Automotive, diesel or marine engine (except turbine) lubricating oils

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    W - Rating variable

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    No qup
  • Unit of Measure
    Dr
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $6,511.15 to $10,851.91..
Does NSN 9150-00-111-0208 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Defense Logistics Agency, and Turkey
What is the NIIN of NSN 9150-00-111-0208?
001110208 or 00-111-0208
Does NSN 9150-00-111-0208 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-111-0208?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Aug 21, 1968
MSDS

Material Safety

MSDS BCYZT 60476-10W LUBRICATING OIL, MIL-L-21260-10W

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: manufacturer states,"product has been
used for years with no known ill effects. it contains no known
carcinogens ot mutagens as defined by osha or iarc." product is
very mildly irritating to body ti ssues. most likely hazard is
that of breathing the mist or vapors should the product be heated
or misted.

explanation of carcinogenicity: the product contains no ingredient that
is listed by iarc, ntp or osha as a carcinogen.

effects of overexposure: eye: mild irritation. Skin: possible mild
irritation. Inhaled: respiratory irritation,possible pulmonary edema
if mist is inhaled. ingested: none given by manufacturer
(supplier).

medical cond aggravated by exposure: none reported

First Aid

First aid: eye: flush w/water 15 min, hold lids open. skin: wash with
soap & water. Remove contaminated clothing and launder before
reuse. inhaled: remove to fresh air. Restore breathing if
necessary. Ingested: d o not induce vomiting. Give 2 large glasses
of milk or water and get immediate medical care. Give nothing by
mouth if unconscious. if irritation persists or is severe,see a
doctor.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 700f/371c
viscosity: 5.6-7.4 cs
solubility in water: negligible
appearance and odor: fluid oil,bland odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: may sensitize acute allergic reactions.

hazardous decomposition products: carbon dioxide,carbon monoxide

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state, local regulations.

mfr suggests recycle or if that is not practicle to incinerate.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 85.4%
other rec limits: none specified

ingred name: lubrizol 4856a (lubrizol, cleveland, oh)
fraction by wt: 12.2%
other rec limits: none specified

ingred name: lubrizol 1161 (lubrizol corp, wickliffe, oh)
fraction by wt: 2.20%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: acrylic copolymer (rohm & haas co. Philadelphia,pa)
fraction by wt: 0.2%
other rec limits: none specified

MSDS BCYZV MIL-L-21260C,GRADE 10,LUBRICATING OIL

Hazards

Effects of overexposure: eyes/skin: slight irrit;inhal: may irrit resp
tract if above tlv;ingest: diarrhea,upset stomach.

First Aid

First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.

Chemical Properties

Hcc: v6
spec gravity: 0.8762
solubility in water: negligible
appearance and odor: bright & clear oil, mineral oil odor.

Reactivity

Stability indicator/materials to avoid: yes
none
stability condition to avoid: heat, ignition sources
hazardous decomposition products: when involvd in combustion,emits
oxides of c,n,aldehyd/keton

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: additive package
containing(calcium,zinc,sulfur,&phosphorus; % wt range: 1-5%
fraction by wt:

MSDS BCYZW TECTYL 873-SAE 10

Hazards

Effects of overexposure: eye & skin: irrit.Inhal: irrit of nasal & respir
passages.Ingest: gi irrit,nausea,vomit,diarrhea.

First Aid

First aid: skin: wash w/ soap & water.Eye: flush w/ large amounts of
water,lifting lids occasionally,get med attn.Inhal: remove to fresh
air.Ingest: drink water.Induce vomit.Never give anything by mouth to
an uncons cious person.Get medical attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >425f,>218c
vapor density: >1
spec gravity: 0.892
evaporation rate & reference: slower than ether
solubility in water: negligible

Reactivity

Stability indicator/materials to avoid: yes
avoid contact w/ strong oxidizing agents

Proper Disposal

Waste disposal methods: small: dispose in accordance w/ local,state & fed
regulations.Large spill: destroy by incineration in accord w/
applicable regulations.Contaminated absorbent may be deposited in a
landfill in accordance w/ local,state & federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum lube oil
fraction by wt: >75%
acgih tlv: 5 mg/cum

MSDS BGWYX MIL-L-21260D 10 W QUAL MP-322

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: while this product may irritate the

First Aid

First aid: if swallowed do not induce vomiting. Call a physician
immediately. if splashed in eyes, purge with copious amounts of
water. in case of skin contact, cleanse with saterless hand
cleaner or by thorou ghly washing with soap and water.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 600f,316c
melt/freeze pt: m.P/f.P text: 0
vapor pres: 1
vapor density: 1
spec gravity: 1
evaporation rate & reference:
solubility in water: 0
appearance and odor: dark-amber-no odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: only when burning - carbon monoxide,
carbon dioxide, sulfur & nitrogen compounds
conditions to avoid polymerization: mfr said "not appliciable" in this
field.

Proper Disposal

Waste disposal methods: dispose of contaminated diking material
according to current federal, state and local laws and regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lube oil base stock/refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt: 94-96%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: proprietary additives - the composition of these is
proprietary to lubrizol, contact them for more information.

fraction by wt: 4-6%
other rec limits: none specified

MSDS BJFML SCT PRESERVATIVE OIL SAE 10W

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and
chronic: acute-eye: irritation.Skin: irritation.Inhale: exposure to
heated mist/vapor may cause
irritation.Ingestion: irritation.Chronic-skin: dermatitis.

effects of overexposure: eye: direct contact may cause burning, tearing,
and redness.Skin: redness and burning.Inhalation: irritation to nose
and throat.Ingestion.Irritation to the digestive tract.

medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.

First Aid

First aid: eye: flush with clean water.If irritation/redness persists,see
a doctor.Skin: wash with soap & water.If irritation persists, see a
physician.Inhalation: move to fresh air.If irritation persists, see
a do ctor.Ingestion: don't induce vomiting.Call a physician.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres:
vapor density: >1
spec gravity: .87-.88
ph: 7
evaporation rate & reference:
solubility in water: negligible
appearance and odor: dark amber liquid, mild odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat
hazardous decomposition products: major amounts of oxides of carbon and
minor amounts of oxides of sulfur, nitrogen, phosphorus, and zinc.

Proper Disposal

Waste disposal methods: disposal should be made in accordance with all
applicable federal, state and local laws and
regulations.Enclosed-controlled incineration is recommended unless
directed otherwise by applicable ordinanc es.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum oil/base oil/lubricating oil basestock
cas: 8002-05-9
rtecs #: se7175000
fraction by wt: 80-90%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: phosphorodithioic acid, zinc salt
rtecs #: td5110000
other rec limits: none specified

ingred name: the manufacturer states that the identities of ingredients
that are trade secrets are excluded from the msds list.

rtecs #: 9999999zz
other rec limits: none specified

MSDS BPHFX SUNS0LVENTREFINED 2610A, SR 2610 SAE 10

Hazards

Ld50 lc50 mixture: ld50, rats is 20,000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: inhalation: no acute effects to twice
exposure limits. Skin: practically non-toxic if absorbed (ld50
greater than 2000 mg/kg). Mild irritation with prolonged or
repeated contact. Eyes: contact with th e eye may cause mild to
moderate irritation.

explanation of carcinogenicity: proprietary detergent additive
containing calcium, sulfur, prosphorus,zinc, zinc hydroxy(alklated)
benzoate plus others.

effects of overexposure: see health hazards (acute & chronic).

medical cond aggravated by exposure: prior skin disorders.

First Aid

First aid: skin: wash with soap and water until no odor remains. Wash
clothing before reuse. Inhalation: move perso to fresh air. Eye:
flush thoroughly with water. If irritation persists, get medical
attention. Ingestion: give liquids and induce vomiting unless
victim is unconscious. Obtain emergency medical attention.

Chemical Properties

Hcc: v6
spec gravity: 0.87
solubility in water: negligible
appearance and odor: dark fluid, little odor
percent volatiles by volume: nil.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: extreme heat.

hazardous decomposition products: carbon monoxide and asphyxiants

Proper Disposal

Waste disposal methods: consult your local environmental officer. Follow
federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

MSDS BTTRJ TECTYL 910

Hazards

Ld50 lc50 mixture: tlv for oil mist is 5 mg/m3.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- eye exposure causes irritation. Skin exposure
may cause mild irritation. Inhalation of vapor (generated at high
temperatures only)/oil mist ma y cause irritation. Single oral
toxicity is low. Swallowing large amounts may be harmful . Chronic-
unknown.

explanation of carcinogenicity: warning! Used motor oils were shown to
cause skin cancer when repeatedly applied to mice without cleaning
skin.

effects of overexposure: irritation, nausea, vomiting, diarrhea,
tearing, headache
medical cond aggravated by exposure: persons with pre-existing skin
disorders or impaired respiratory function may be more susceptible
to the effects of this product.

First Aid

First aid: call physician if symptoms persist. Inhaled: remove to fresh
air. Provide cpr/oxygen if needed. Eyes: flush with water for 15
minutes. Hold eyelids open. Skin: wash with soap & water. Oral: do
not induce vomiting. This material is an aspiration hazard. If
person is drowsy/unconscious, place on left side with head down.

get medical attention. If possible, do not leave individual
unattended.

Chemical Properties

Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: 590f - 887f
vapor pres:
vapor density: >1
spec gravity: 0.882
evaporation rate & reference:
appearance and odor: liquid

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extreme heat, open flames
hazardous decomposition products: carbon monoxide, carbon dioxide,
various hydrocarbons

Proper Disposal

Waste disposal methods: dispose of in accordance with local state and
federal regulations. Product is an oil. Spills to us surface waters
or watercourse or sewer that cause a visible sheen must be reported
to the national re sponse center. Rcra phone: 800-424-9346.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil, petroleum distillate, solvent dewaxed (mild),
heavy paraffinic/solvent dewaxed heavy paraffinic oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 80 - 90%
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist

ingred name: detergent & dispersant engine oil package
fraction by wt: 7 - 17%
other rec limits: none recommended

MSDS BWGWZ TECTYL 910

Hazards

Ld50 lc50 mixture: tlv: 5 mg/m3 as oil mist.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory &
gastrointestinal tracts. Acute- eye/skin/inhalation: may cause
irritation. Oral: single dose oral toxicity is low. Swallowing small
amounts during normal handling is not likely to cause hamful
effects; swallowing large amounts may be harmful. Chronic- unknown.

explanation of carcinogenicity: warning! Used motor oils were shown to
cause skin cancer when repeatedly applied to mice without cleaning
skin.

effects of overexposure: eyes, skin, respiratory and gastrointestinal
tracts irritation; nausea, vomiting, headaches, stinging, tearing,
redness and swelling of eyes; redness and burning of skin, diarrhea
medical cond aggravated by exposure: asthma-like conditions

First Aid

First aid: get medical attention if symptoms persist. Skin: remove
contaminated clothing. Wipe off excess. Wash skin with soap &
water. Eye: flush with water for 15 minutes. Hold eyelids open.

inhaled: remove to fr esh air. Provide oxygen/cpr if needed. Oral: do
not induce vomiting. Call a physician. Keep person warm and quiet.

Chemical Properties

Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: 500f,260c
vapor pres: 0.10 @ 68f
vapor density: >1
spec gravity: 0.882
evaporation rate & reference:
appearance and odor: liquid - oil odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extreme heat
hazardous decomposition products: may form carbon monoxide, carbon
dioxide and other hydrocarbons.

Proper Disposal

Waste disposal methods: dispose of in accordance with local state and
federal regulations. Product is an oil. Spills to us surface waters
or watercourse or sewer that cause a visible sheen must be reported
to the national re sponse center. Rcra phone: 800-424-9346.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: detergent & dispersant engine oil package (ingredient # 4
is a part of this ingredient.)
fraction by wt: 10 - 15%
other rec limits: none recommended

ingred name: solvent dewaxed heavy paraffinic petroleum distillate
fraction by wt: 40 - 55%
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist

ingred name: hydrocarbon oils
cas: 68410-95-7
fraction by wt: 25 - 40%
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist

ingred name: zinc compound (maximum 30%)
fraction by wt: see # 1%
other rec limits: none recommended

MSDS CFKQC GARD ANTI RUST SAE 10W (PRESERVATION BREAK-IN OIL

Hazards


ld50 lc50 mixture: oral toxicity not determined.

route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye: can cause mild eye irritation and discomfort. Skin:
avoid prolonged skin contact. May cause skin irritation. Inhalation:
overexposure by inhalation of hot material can cause nonspecific discomfor t.

caution should be taken to prevent forming aerosol or misting of this product
without proper respiratory protection. Ingestion: do not ingest. Due to the
expected concentration of oil (70-100%) ing estion is expected to be
relatively nontoxic unless lung aspriation occurs. This product has laxitive
properties and may result in abdominal cramps and diarrhea.

explanation of carcinogenicity: per msds: carcinogenicty: not determined.

signs and symptions of overexposure: eye: irritation, tearing, blurring of
vision. Skin: irritation, dryness, chapping and redenning of skin.

inhalation: nausea, headache, weakness. Ingestion: aspiration can lead to
chemical pneumonitis, pulmonary edema and hemorrhage, lung involvement
include increased respiratory rate, increased heart rate, bluish
discoloration of skin. Coughing, choking and gagging. Gastrointestinal
discomfort may develop followed by vomiting. This product has laxitive
properties and may result in abdominal cramps and diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

first aid: eye: immediately flush with large amounts of water, continue
flushing until irritation subsides. If irritation persists, call physician.

if material is hot, treat for thermal burns, take victim to ho spital
immediately. Skin: remove contaminated clothing. Wash area thoroughly with
soap & water. If redness/irritation occur get medical help. If material
is hot, submerge injured area in cold water. I f severely burned, take to
hospital immediately. Wash contaminated clothing before reuse. Inhalation: if
overcome by inhalation of hot vapors, remove to fresh air. Use oxygen if
breathing is difficult or artificial (see other information)

Chemical Properties


hcc: v6
b.P. Text: n/determine
melt/freeze pt: =-36.1c, -33.F
vapor pres: negligible @ stp
vapor density: >1@stp
spec gravity: 0.882
viscosity: 6.3cst @100c
evaporation rate & reference: neglgible,(nbuac=1)
solubility in water: negligible
appearance and odor: mild petroleum hydrocarbon odor, dark brown, clear fluid
percent volatiles by volume: neglig

HAZCOM Label


product id: gard anti rust sae 10w (preservation break-in oil
cage: 3k676
company name: unimark oil company (formerly gard oil)
street: 2727 roe lane
city: kansas city ks
zipcode: 66103-1543
health emergency phone: 913-236-5000/800-424-9300(chemtrec)
label required ind: y
date of label review: 10/14/1997
status code: c
label date: 10/14/1997
year procured: 1997
origination code: f
eye protection ind: yes
skin protection ind: yes
respiratory protection ind: yes
health hazard: slight
contact hazard: slight
fire hazard: none

Transportation

=======================================================
responsible party cage: 3k676
trans id no: 47984
product id: gard anti rust sae 10w (preservation break-in oil
msds prepared date: 06/30/2000
review date: 10/14/1997
mfn: 1
net unit weight: 404.0 lbs
multiple kit number: 0
review ind: y
unit of issue: dr
container qty: 0
type of container: 1a1 18/18 gau
additional data: per ctdf: 1a1 18/18 gauge steel drum. Per msds: dot bulk
shipping description: doesnt apply to bulk oil shipping;dot id#/ha
classification: not applicable

Reactivity

Hazard and precautions: contans matls that can cause mild eye irrit
w/discomft,tear,blur vision & skin irrit.Prol/rep skin contact result in
derm(dry,chap,red).Inhal: overexpo of hot matl may cause monspecific
discomft.Tarorg : eye/skin.1staid: eye: immed flush w/lotsof h2o,cont flush til
irrit subsides;if persist call dr.Matl hot treat for therm burns,take to hosp
immed.Skin: remove contam cloth.Wash area well w/soap/h2o.Red/ irrit occur get
med attn.Matl hot submerge area in cold h2o.Severely burn taketo hosp
immed.Inhal: move to fresh air.Diffi breath use oxy;breath stop use art
resp.Get immed med attn.Oral: dont induce vo mit.Consc give 2glass of h2o.Get
med attn.

Proper Disposal


spill release procedures: immediately turn off/isolate any ignition source.

evacuate area & ventilate. Personnel wearing proper protective equipment
should contain spill immediately with inert material (sand, earth, chemical s
pill pads of cotton) by forming dike. Dikes should be placed to contain spill
in manner that will prevent material from entering sewers and waterways.

large spill, once contained, may(see sup data)
neutralizing agent: not provided
waste disposal methods: dispose of in accordance with local state & federal
regualtions. Spilled material may be regulated waste. Refer to state &
local regulations. Department of transportation regs may apply if transportin
g spilled material. If spilled material is cleaned up using regulated
solvent, the resulting waste m ay be regulated.

handling and storage precautions: keep containers closed when not in use. Do
not transfer to unmarked containers. Keep fire extinguishers available. See
nfpa 30 & osha 1910.106. Empty containers contain residue which may
exhibit mater ial hazards. Do not pressurize, cut, glaze, weld or use for
other purposes.

other precautions: return drums to reclamation centers. Store containers away
from heat, sparks, open flame or other oxidizing materials.

MSDS CLDMW GARD ANTI RUST SAE 10W, PRESERVATION BREAK-IN OIL

Hazards


ld50 lc50 mixture: oral toxicity not determined.

route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye: can cause mild eye irritation and discomfort. Skin:
avoid prolonged skin contact. May cause skin irritation. Inhalation:
overexposure by inhalation of hot material can cause nonspecific discomfor t.

caution should be taken to prevent forming aerosol or misting of this product
without proper respiratory protection. Ingestion: do not ingest. Due to the
expected concentration of oil (70-100%) ing estion is expected to be
relatively nontoxic unless lung aspriation occurs. This product has laxitive
properties and may result in abdominal cramps and diarrhea.

explanation of carcinogenicity: per msds: carcinogenicty: not determined.

signs and symptions of overexposure: eye: irritation, tearing, blurring of
vision. Skin: irritation, dryness, chapping and redenning of skin.

inhalation: nausea, headache, weakness. Ingestion: aspiration can lead to
chemical pneumonitis, pulmonary edema and hemorrhage, lung involvement
include increased respiratory rate, increased heart rate, bluish
discoloration of skin. Coughing, choking and gagging. Gastrointestinal
discomfort may develop followed by vomiting. This product has laxitive
properties and may result in abdominal cramps and diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

first aid: eye: immediately flush with large amounts of water, continue
flushing until irritation subsides. If irritation persists, call physician.

if material is hot, treat for thermal burns, take victim to ho spital
immediately. Skin: remove contaminated clothing. Wash area thoroughly with
soap & water. If redness/irritation occur get medical help. If material
is hot, submerge injured area in cold water. I f severely burned, take to
hospital immediately. Wash contaminated clothing before reuse. Inhalation: if
overcome by inhalation of hot vapors, remove to fresh air. Use oxygen if
breathing is difficult or artificial (see other information)

Chemical Properties


hcc: v6
boiling point: >260.C, 500.F
b.P. Text: expected
melt/freeze pt: =-36.1c, -33.F
m.P/f.P text: pour point
vapor pres: negligible @ stp
vapor density: >1@stp
spec gravity: 0.882
viscosity: 6.3cst @100c
evaporation rate & reference: neglgible,(nbuac=1)
solubility in water: negligible
appearance and odor: mild petroleum hydrocarbon odor, dark brown, clear fluid
percent volatiles by volume: neglig

HAZCOM Label


product id: gard anti rust sae 10w, preservation break-in oil
cage: 1ru67
company name: unimark oil co llc
street: 2727 roe lane
city: kansas city ks
zipcode: 66103-1543
health emergency phone: 913-236-5000
label required ind: y
date of label review: 06/02/2001
status code: a
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: no
health hazard: slight
contact hazard: slight
fire hazard: slight

Reactivity

Hazard and precautions: target organs: n/p. eye: can cause mild eye irritation
and discomfort. Skin: avoid prolonged skin contact. May cause skin
irritation. Inhalation: overexposure by inhalation of hot material can cause
nonspecific discomfort.

Proper Disposal


spill release procedures: immediately turn off/isolate any ignition source.

evacuate area & ventilate. Personnel wearing proper protective equipment
should contain spill immediately with inert material (sand, earth, chemical s
pill pads of cotton) by forming dike. Dikes should be placed to contain spill
in manner that will prevent material from entering sewers and waterways.

large spill, once contained, may(see sup data)
neutralizing agent: not provided
waste disposal methods: dispose of in accordance with local, state &
federal regualtions. Spilled material may be regulated waste. Refer to state
& local regulations. Department of transportation regs may apply if
transporti ng spilled material. If spilled material is cleaned up using
regulated solvent, the resulting waste may be regulated.

handling and storage precautions: keep containers closed when not in use. Do
not transfer to unmarked containers. Keep fire extinguishers available. See
nfpa 30 & osha 1910.106. Empty containers contain residue which may
exhibit mater ial hazards. Do not pressurize, cut, glaze, weld or use for
other purposes.

other precautions: return drums to reclamation centers. Store containers away
from heat, sparks, open flame or other oxidizing materials.