Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Engine Lubricating Oil

NSN: 9150-00-111-0209 | Model: M21260-3-30W

A petroleum oil, a synthetically prepared product, or a combination thereof, prepared primarily for lubrication in crank cases of internal combustion engines. It usually contains additives for corrosion prevention and oxidation prevention, and may contain detergents. See also lubricating oil, general purpose. It does not include lubricating oil, aircraft piston engine.

NSN Properties and Flags
NATO Stock Number
9150-00-111-0209
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Any acceptable
Quantity Within Each Unit Package
5.000 gallons
Viscosity At Rated Temp
9.30 100 degrees c and 12.50 100 degrees c
Maximum Pour Point
-18.0 degrees celsius
Minimum Flash Point And Test Method
220.0 degrees celsius cleveland open cup
Nondefinitive Specification/std Data
30 grade

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-111-0209 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • M21260-3-30W
  • MIL-PRF-21260
  • MIL-L-21260
Cage Codes:
  • Military Specifications (CAGE 81349)
Replacements:
  • 9150-00-111-0209 replaces 9150-00-264-3943
Schedule B & Trade:
  • Schedule B: 2710193020 (NAICS 324110)

    Automotive, diesel or marine engine (except turbine) lubricating oils

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    W - Rating variable

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    1
  • Unit of Measure
    Cn
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $1,126.67 to $1,877.78..
Does NSN 9150-00-111-0209 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Spain, Canada, Germany, Republic Of Korea, Philippines, Portugal, Italy, Greece, and Turkey
What is the NIIN of NSN 9150-00-111-0209?
001110209 or 00-111-0209
Does NSN 9150-00-111-0209 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-111-0209?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Aug 21, 1968
MSDS

Material Safety

MSDS BCYZY TECTYL 930

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhalation of mist may cause
irritation of nasal & respiratory passages. Contact may cause skin
& eye irritation. Ingestion may cause gi tract irritation. Chronic:
none specified by manufacture r.

explanation of carcinogenicity: the components of this product have not
shown any evidence of being carcinogenic.

effects of overexposure: eyes: rednes, tearing, discomfort. Skin:
redness, discomfort. Inhaled: coughing, wheezing, sneezing,
shortness of breath. Ingested: nausea, vomiting, diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: get medical attention.Eyes-flood with water for 15
minutes,lift lids.Skin-flush with water for 15 minutes.If
irritation occurs/persist,see doctor.Inhaled-move to fresh
air.Ingested-do not induce vomit ing!

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 365f,185c
vapor pres:
vapor density: >1
spec gravity: 0.892
evaporation rate & reference:
appearance and odor: liquid; manufacturer states "unknown".

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none specified by manufacturer. Dla-hmis:
avoid exposure to high heat, open flames and other sources of
ignition
hazardous decomposition products: none specified by manufacturer.

dla-hmis: carbon monoxide and carbon dioxide, smoke.

Proper Disposal

Waste disposal methods: dispose of waste in accordance with all
applicable local, state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 85-100%
other rec limits: none specified
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 (oil mist)

ingred name: zinc compounds (contained in ingredient #2) [percentage
given is 30% of ingredient #2]
fraction by wt: 30% max
other rec limits: none specified

ingred name: detergent/dispersant engine oil package
fraction by wt: 10-15%
other rec limits: none specified

MSDS BCYZZ MIL-L-21260C,GRADE30.

Hazards

Effects of overexposure: no significant signs or symptoms indicative of
any adverse health effects.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 670f/354c
vapor pres: nil
vapor density: >12
spec gravity: 0.88
evaporation rate & reference:
solubility in water: neg
appearance and odor: dark colored fluid w/mild petroleum odor.

percent volatiles by volume: neg

Reactivity

Stability indicator/materials to avoid: yes
strong oxidants: chloring,conc oxygen or hypochlorite.

hazardous decomposition products: fumes,co,smoke,so*2.

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mfg did not specify.Is a lubricating oil
rtecs #: 9999999zz

MSDS BCZBC 60476-30W LUBRICATING OIL, MIL-L-21260-30W

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: manufacturer states,"product has been
used for years with no known ill effects. it contains no known
carcinogens ot mutagens as defined by osha or iarc." product is
very mildly irritating to body ti ssues. most likely hazard is
that of breathing the mist or vapors should the product be heated
or misted.

explanation of carcinogenicity: the product contains no ingredient that
is listed by iarc, ntp or osha as a carcinogen.

effects of overexposure: eye: mild irritation. Skin: possible mild
irritation. Inhaled: respiratory irritation,possible pulmonary edema
if mist is inhaled. ingested: none given by manufacturer
(supplier).

medical cond aggravated by exposure: none reported

First Aid

First aid: eye: flush w/water 15 min, hold lids open. skin: wash with
soap & water. Remove contaminated clothing and launder before
reuse. inhaled: remove to fresh air. Restore breathing if
necessary. Ingested: d o not induce vomiting. Give 2 large glasses
of milk or water and get immediate medical care. Give nothing by
mouth if unconscious. if irritation persists or is severe,see a
doctor.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 700f,371c
viscosity: 9.3-12.5 cs
solubility in water: negligible
appearance and odor: fluid oil, bland odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: may sensitize acute allergic reactions.

hazardous decomposition products: carbon dioxide,carbon monoxide

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state, local regulations.

mfr suggests recycle or if that is not practicle to incinerate.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 85.4%
other rec limits: none specified

ingred name: lubrizol 4856a (lubrizol, cleveland, oh)
fraction by wt: 12.2%
other rec limits: none specified

ingred name: lubrizol 1161 (lubrizol corp, wickliffe, oh)
fraction by wt: 2.20%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: acrylic copolymer (rohm & haas co. Philadelphia,pa)
fraction by wt: 0.2%
other rec limits: none specified

MSDS BCZBD MIL-L-21260C GRADE 30

Hazards

Ld50 lc50 mixture: ld50 (oral rat) is > 10000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- eyes: may cause minimal
irritation/transient minor irritation. Skin: may cause slight
irritation. Inhalation: minimally irritating if tlv is not in
excess of 5mg/m3 oil mists. Ingestion: practi cally non-toxic.

chronic- none known.

explanation of carcinogenicity: used motor oils have shown to cause skin
cancer in mice.

effects of overexposure: may cause minimal eye irritation or transient
minor eye irritation. May cause slight skin irritation. Inhalation
is minimally irritating if tlv is not in excess of 5mg/m3 oil
mists.

medical cond aggravated by exposure: pre-existing skin disorders may be
more susceptible to this material.

First Aid

First aid: get medical help if needed. Inhalation: remove to fresh air.

eyes: immediately flush with water for 15 minutes holding eyelids
open. Skin: remove contaminated clothing. Wash with soap and water.

ingest ion: not considered necessary. Call physician if symptoms
develop.

Chemical Properties

Hcc: v6
spec gravity: 0.892
appearance and odor: bright and clear liquid

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide,
aldehydes and ketones, combustion products of nitrogen and sulfur.

Proper Disposal

Waste disposal methods: dispose of contaminated diking material
according to current federal, state and local laws and regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum oil; wt % range: 80-95%
fraction by wt: 87.5%
acgih tlv: 5mg/cum(mist)

ingred name: additive package containing nitrogen,zinc,calcium,sulfur &
phosphorus;wt % range: 5-10
fraction by wt: 07.5%

MSDS BGWYY IMPERIAL 21260D MIL-L-21260D, GRADE 30, QU

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: while this product may irritate the

First Aid

First aid: if swallowed, do not induce vomiting; cal a physician
immediately. If splashed into the eyes, purge with copious amounts
of water. In case of skin contact cleanse with waterless soap
followed by thoro ugh washing with soap and water.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 600f,316c
melt/freeze pt: m.P/f.P text: 0
vapor pres: mm
vapor density: 1
spec gravity: 1
evaporation rate & reference:
solubility in water: 0
appearance and odor: dark-amber-no odor

Reactivity

Stability indicator/materials to avoid: yes
contact with strong oxidizers
stability condition to avoid: mfr said "not appliciable" in this field.

hazardous decomposition products: only when burning - carbon monoxide,
carbon dioxide, sulfur & nitrogen compounds

Proper Disposal

Waste disposal methods: dispose of contaminated diking material
according to current federal, state and local laws and regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lube oil base stock/refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt: 94 - 96%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: proprietary additives - for more information call lubrizol
corp.

fraction by wt: 4 - 6%
other rec limits: none specified

MSDS BJFMM SCT PRESERVATIVE OIL SAE 30

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and
chronic: acute-eye: irritation.Skin: irritation.Inhale: exposure to
heated mist/vapor may cause
irritation.Ingestion: irritation.Chronic-skin: dermatitis.

effects of overexposure: eye: direct contact may cause burning, tearing,
and redness.Skin: redness and burning.Inhalation: irritation to nose
and throat.Ingestion.Irritation to the digestive tract.

medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.

First Aid

First aid: eye: flush with clean water.If irritation/redness persists,see
a doctor.Skin: wash with soap & water.If irritation persists, see a
physician.Inhalation: move to fresh air.If irritation persists, see
a do ctor.Ingestion: don't induce vomiting.Call a physician.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres:
vapor density: >1
spec gravity: .87-.88
ph: 7
evaporation rate & reference:
solubility in water: negligible
appearance and odor: dark amber liquid, mild odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat
hazardous decomposition products: major amounts of oxides of carbon and
minor amounts of oxides of sulfur, nitrogen, phosphorus, and zinc.

Proper Disposal

Waste disposal methods: disposal should be made in accordance with all
applicable federal, state and local laws and
regulations.Enclosed-controlled incineration is recommended unless
directed otherwise by applicable ordinanc es.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum oil/base oil/lubricating oil basestock
cas: 8002-05-9
rtecs #: se7175000
fraction by wt: 80-90%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: phosphorodithioic acid, zinc salt
rtecs #: td5110000
other rec limits: none specified

ingred name: the manufacturer states that the identities of ingredients
that are trade secrets are excluded from the msds list.

rtecs #: 9999999zz
other rec limits: none specified

MSDS BLFDH GARD ANTI-RUST SAE 30

Hazards

Ld50 lc50 mixture: ld50 (oral rat) is >15 gm/kg
routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and chronic: acute-eyes/skin: mildly irritating to
eyes. Prolonged or repeated contact with skin may cause mild
irritation.Inhalation: no effect expected, but inhalation of mist
may cause chemical pneumonitis. Inges tion: low toxicity. May cause
diarrhea. Chronic-none known to mfr.

explanation of carcinogenicity: none specified by manufacturer.

effects of overexposure: eyes & skin: mild irritation.

ingestion: diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: inhalation: remove to fresh air. Give cpr/oxygen if needed.

get medical attention. Eyes: immediately flush with water for 15
minutes. Get medical attention. Skin: remove & launder contaminated
clothing. wash skin with soap & water. Discard saturated leather
articles. Ingestion: do not induce vomiting. Seek medical help.

Chemical Properties

Hcc: v6
vapor pres:
vapor density: >12
spec gravity: 0.87
evaporation rate & reference: x1000 slower than bu ac
solubility in water: nil
appearance and odor: dark amber liquid with mild odor
percent volatiles by volume: nil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents (peroxides, chlorine), strong acids
stability condition to avoid: excessive heat, open flames.

hazardous decomposition products: oxides of carbon, nitrogen, phosphorus
and smoke on combustion

Proper Disposal

Waste disposal methods: dispose in an approved landfill site or a
licensed waste reclamation facility. Disposal should be made in
accordance with all applicable federal, state and local laws and
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: heavy paraffinic distillate, solvent extract
cas: 64742-04-7
rtecs #: py8042500
other rec limits: 5 mg/m3 oil mist

ingred name: additive package containing zinc, sulfur, ca, phosphorus
and nitrogen.

other rec limits: none specified

MSDS BPFPQ SUNS0LVENTREFINED 2650A, SR 2650 SAE 50

Hazards

Ld50 lc50 mixture: ld50, rats is >25,000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: inhalation: no acute effects to twice
exposure limits. Skin: practically non-toxic if absorbed (ld50
greater than 2000 mg/kg). No skin effects expected. Eyes: contact
with the eye may cause mild irrit ation. No permanent damage
expected. Ingestion: practically non-toxic.

explanation of carcinogenicity: proprietary detergent additive
containing calcium, sulfur, prosphorus,zinc, zinc hydroxy(alklated)
benzoate plus others.

effects of overexposure: see health hazards (acute & chronic).

medical cond aggravated by exposure: prior skin disorders.

First Aid

First aid: skin: wash with soap and water until no odor remains. Wash
clothing before reuse. Inhalation: none normally required. Eye:
flush thoroughly with water. Ingestion: give liquids and induce
vomiting unle ss victim is unconscious. Obtain emergency medical
attention. Small amounts which accidentally enter mouth should be
rinsed out until taste of it is gone.

Chemical Properties

Hcc: v6
spec gravity: 0.90
solubility in water: negligible
appearance and odor: dark fluid, slight odor.

percent volatiles by volume: nil.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: extreme heat.

hazardous decomposition products: carbon monoxide and asphyxiants

Proper Disposal

Waste disposal methods: consult your local environmental officer. Follow
federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

MSDS BPHFY LUBRICATING OIL

Hazards

Ld50 lc50 mixture: ld50 (oral rat) is >15 gm/kg
routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and chronic: acute-eyes/skin: mildly irritating to
eyes. Prolonged or repeated contact with skin may cause mild
irritation. Inhalation: no effect expected, but inhalation of mist
may cause chemical pneumonitis. Inge stion: low toxicity. May cause
diarrhea.Chronic-none known to mfr.

explanation of carcinogenicity: none expected from normal product
composition.

effects of overexposure: eyes & skin: mild irritation. Ingestion:
diarrhea.

medical cond aggravated by exposure: none known.

First Aid

First aid: inhalation: remove to fresh air. Give cpr/ oxygen if needed.

get medical attention. Eyes: immediately flush with water for 15
minutes. Get medical attention. Skin: remove & launder contaminated
clothing. wash skin with soap & water. Discard saturated leather
articles. Ingestion: do not induce vomiting. Seek medical help.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: not known
vapor pres:
vapor density: >12
spec gravity: 0.87
evaporation rate & reference: x1000 slower than bu ac
solubility in water: nil
appearance and odor: dark amber liquid with mild odor
percent volatiles by volume: nil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents (peroxides, chlorine), strong acids
stability condition to avoid: excessive heat, open flames.

hazardous decomposition products: oxides of carbon, nitrogen, phosphorus
and smoke on combustion

Proper Disposal

Waste disposal methods: dispose in an approved landfill site or a
licensed waste reclamation facility. Disposal should be made in
accordance with all applicable federal, state and local laws and
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: heavy paraffinic distillate, solvent extract
cas: 64742-04-7
rtecs #: py8042500
other rec limits: 5 mg/m3 oil mist

ingred name: additive package containing zinc, sulfur, ca, phosphorus
and nitrogen.

other rec limits: none specified

MSDS BRSYR GARD ANTIRUST SAE 30W

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may cause transient irritation.

skin: prolonged or repeated contact may cause irritation, rash,
dermatitis. Inhalation: inhalation of heated vapors may cause
irritation of the lungs. Ingestion: may cause gastrointestinal
irritation.

effects of overexposure: eyes: transient irritation. Skin: irritation,
rash, dermatitis. Inhalation: irritation of lungs. Ingestion:
gastrointestinal irritation, diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: flush with large amounts of water. If irritation
persists, get medical attention. Skin: remove contaminated
clothing. Wash area with soap and water. If redness, rash or
irritation occurs, get me dical attention. Inhalation: move to
fresh air. If not breathing, give cpr. If breathing difficult, give
oxygen. Get medical attention. Ingestion: do not induce vomiting.

get medical attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor density: >1 air=1
spec gravity: 0.9
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: amber liquid. Oily odor.

percent volatiles by volume: nil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: temperatures over 220c (428f). Open
flames, other sources of ignition.

hazardous decomposition products: carbon monoxide, carbon dioxide,
noxious smoke.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: notify appropriate authorities of spill. Dispose
or waste in accordance with local, state and federal regulations.

materials should be recycled if possible.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrotreated paraffinic distillate
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 80-90%
other rec limits: none recommended
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist9293

ingred name: proprietary additives
fraction by wt: 8-16%
other rec limits: none recommended

ingred name: zinc compounds
fraction by wt: 0.14%
other rec limits: none recommended

MSDS BVPXY TECTYL 930

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-can cause irritation. Skin-can
casue irritation. Breathing-of mist may casue irritation of nasal &
respiratory passage. Swallowing-can cause gastrointestinal
irritation.

explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.

effects of overexposure: swallowing-can cause nausea, vomiting and
diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: skin-thoroughly wash exposed area with soap & water.

eyes-flush with large amounts of water, lifting upper & lower lids
occasionally. Get medical attention, if irritation persists.

swallowed-do not in duce vomiting, keep person warm & quiet, & get
medical attention. Breathed-remove individual to fresh air.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 365f,185c
vapor pres:
vapor density: >air
spec gravity: 0.892
evaporation rate & reference: slower than ether
appearance and odor: state-liquid. Form-homogeneous solution.

Reactivity

Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: mat form toxic materials; carbon
dioxide and carbon monoxide, various hydrocarbons, etc.

Proper Disposal

Waste disposal methods: dispose of in accordance with all applicable
local, state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: detergent and dispersant in highly refined and/or severely
hydrotreated base oil.

fraction by wt: 10-15%
other rec limits: none recommended

ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 85-100%
other rec limits: none recommended
acgih tlv: 5 mg/m3 (oil mist)

MSDS BWCVJ GARD ANTIRUST SAE 10, 30 & 15W-40 I/A/W MIL-L-21260D

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-may cause transient irritation.

inhalation-inhalation of heated vapors may cause irritation of the
lungs. Ingestion-may cause gastrointestinal irritation.

explanation of carcinogenicity: not carcinogenic.

effects of overexposure: skin contact-prolonged or repeated skin contact
may cause irritation, rash or dermatitis.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eye-wash with large volumes of water for 10 min. Get medical
attention. Skin-remove any contaminated clothing as soon as
possible. Wash exposed skin thoroughly with soap & water. Get
medical attention . Inhalation-remove person to fresh airif
overexposure occurs. Administer artificial respiration should
breathing stops. Ingestion-do not induce vomiting if large amounts
are swallowed. See physician

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >932f,>500c
vapor pres: na
vapor density: >1
spec gravity: 0.9
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: amber liquid with oily odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: temperatures over 220 deg. C.

hazardous decomposition products: carbon dioxide, carbon monoxide and
noxious smoke.

Proper Disposal

Waste disposal methods: all disposal must comply with federal, state and
local regulations. Caution! Should regulated solvents be used to
clean up spilled material, the resulting waste mixture may be
regulated. Material may be recycled if possible.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: distillates, hydrotreated heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 80-90%
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm

ingred name: proprietary additives
fraction by wt: 08-16%
other rec limits: none recommended

ingred name: zinc compounds
fraction by wt: 0.14%
other rec limits: none recommended

MSDS BWMBX MIL-L-21260 GRADE 30;19115

Hazards

Ld50 lc50 mixture: tlv for oil mist is 5mg/m3
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: low health hazard. Minimal
irritation on contact. Inhalation of vapors or mists when spraying
may cause irritation. Slightly toxic if swallowed.May cause lung
damage if vomited after ingesting. Chronic: dermatitis. Release
under high pressure may result in injection of oil into the skin
causing local necrosis.

explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.

effects of overexposure: eyes: minimal irritation. Skin: irritation,
skin drying on prolonged contact. Inhalation: irritation of nose
and throat. Ingestion: discomfort, nausea, diarrhea. Injection:
necrosis may be evidenced b y delayed onset of pain and tissue
damage a few hours following pressure injection.

medical cond aggravated by exposure: because of its defatting
properties, prolonged and repeated skin contact may aggravate an
existing dermatitis.

First Aid

First aid: eyes: flush with plenty of water for at least 15 minutes. If
irritation persists, see doctor. Skin: wash with soap. If
irritation persists, see doctor. Inhalation: remove victim to fresh
air. Give oxy gen/cpr if needed. See doctor. Ingestion: do not
induce vomiting. See doctor. Injection: this is a medical
emergency. See doctor immediately.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 500f,260c
melt/freeze pt: m.P/f.P text: 20.0f,-6.7c
vapor pres:
vapor density: 5
ph: 7
viscosity: 116cst
evaporation rate & reference: 0.01 (n-butyl acetate=1)
solubility in water: negligible
appearance and odor: pale oily liquid.

percent volatiles by volume: nil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon dioxide,carbon monoxide,oxides
of sulfur,aldehydes.

Proper Disposal

Waste disposal methods: dispose of in accordance with federal,state and
local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: severely solvent refined & severely hydrotreated mineral
base oils
other rec limits: none recommended

ingred name: mineral oil, petroleum distillate, solvent dewaxed (mild),
heavy paraffinic
cas: 64742-65-0
rtecs #: py8038500
other rec limits: none recommended

ingred name: mineral oil, hydrotreated (mild), heavy naphthenic
distillate, petroleum
cas: 64742-52-5
rtecs #: py8035000
other rec limits: none recommended

MSDS BZNQM BRAYCO 443

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause eye irritation. Prolonged or
repeated skin contact may cause skin irritation, defatting.

excessive inhalation of vapor may cause nasal/respiratory
irritation, dizziness. Ingestion can cause gastrointestinal
irritation, nausea, vomiting, diarrhea.

explanation of carcinogenicity: product contains no materials currently
classified as carcinogenic by ntp, iarc or osha.

effects of overexposure: --eye irritation, redness, tearing, blurred
vision. --skin irritation, defatting, dermatitis.

--respiratory/nasal irritation, dizziness, nausea, headcahe;
possibly unconsciiousness, asphyxiation.

medical cond aggravated by exposure: none known.

First Aid

First aid: skin-remove contaminated clothing. Wipe material from skin.

wash thoroughly with soap & water. Eye-flush eyes with large
amounts of clean water for at least 15 min. Contact a pjysician if
irritation p ersists. Ingestion-do not induce vomting; aspiration
hazard. Consult a physician immediately. Inhalation-remove from
area of exposure. Administer oxygen. If breathing stops, give cpr.

contact physican

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
melt/freeze pt: m.P/f.P text: nd
decomp temp: decomp text: nd
vapor pres:
vapor density: >1
spec gravity: 0.90
ph: nd
viscosity: nd
evaporation rate & reference:
solubility in water: negligible
appearance and odor: clear amber liquid. Slight hydrocarbon odor.

percent volatiles by volume: na
corrosion rate: na

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: heat, open flames.

hazardous decomposition products: smoke, fumes, carbon monoxide, carbon
dioxide; minor amounts of various hydrocarbons and oxides of
nitrogen, sulfur, etc

Proper Disposal

Waste disposal methods: all recovered material should be packaged,
labelled, transported & disposed of or reclaimed in accordance with
good engineering practices. Dispose of by methods in compliance
with local, state and fed eral regulations. May be destroyed by
incineration
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: non-hazardous ingredients
fraction by wt: 100%
other rec limits: none recommended

MSDS CCJPS GARD ANTI RUST SAE 30

Hazards

Ld50 lc50 mixture: oral toxicity: not determined.

routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: based on data from similar
matls: eye: contains matls that can cause mild irrit
w/discomfort,tear,blurr vision.Skin: contains matls that may cause
irrit.Prol/rep contact may result in derm(dryness,chappi
ng,reddening skin).Inhal: overexpo by inhal of hot matl may cause
nonspec discomfort(nau,head,weak)caution should(supple)
explanation of carcinogenicity: per msds: no warning under osha;not
listed by ntp/iarc.

effects of overexposure: mild eye irrit w/discomfort,tearing,blurred
vision.Skin irrit,derm,dryness,chapping,reddening.Nonspecifici
discomfot,nausea,headache,weakness.Aspiration may lead to chem
pneumonitis: pulm edema,hemorrh age,fatal,incr resp rate,incr heart
rate,bluish dicoloration of skin,cough,choke,gaggine.Gi: vomit.Adb
cramps,diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eye: immed flush w/lg atms of water.Cont flush til irrit
subsides.Irrit persists call dr.Matl hot treat for therm burn;take
to hosp immed.Skin: remove contamin cloth.Wash thoroughly
w/soap/water.Red/irr it occurs get med attn.Mtl hot submergein cold
water.Severely burn remove to hosp immed.Inhal: remove to fresh
air.Diffi breath use oxy.Stop breath use art resp.Get med attn if
necessary.(other preca)

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: n/determine
melt/freeze pt: m.P/f.P text: -18c pourpt
decomp temp: decomp text: np
vapor pres: negligible
vapor density: >1
spec gravity: 0.89 @15.6c
ph: np
viscosity: 11.50cst@100c
evaporation rate & reference: negl, (n-butyl acetate=1)
solubility in water: negligible.

appearance and odor: dark brown, clean liquid, mild petroleum
hydrocarbon odor.

percent volatiles by volume: neglig
corrosion rate: np

Reactivity

Stability indicator/materials to avoid: yes
avoid contact w/acids and oxidizing matls.

stability condition to avoid: avoid high temperatures & product
contamination.

hazardous decomposition products: oxides of c, zn, ca, p, s. Addnt
byproducts include hydrogen sulfide, alkyl mercaptans & other
sulfides;smoke,co2,co.

Proper Disposal

Waste disposal methods: all dispo must comply w/fed/state/loc regs.Malt
may be reg waste.Refer to state/loc regs.Dot regs apply for transpo
matl when spill.Caut: if spill matl cleanup w/reg solvt resulting
waste mix may be re g.Per rcra: user responsibility for deter haz
waste
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: aliphatic hydrocarbons
fraction by wt: 80-90%
other rec limits: none recommended

ingred name: proprietary additives
fraction by wt: 10-20%
other rec limits: none recommended

ingred name: alkaryl ethoxylated ethanol
fraction by wt:
other rec limits: none recommended

ingred name: phosphorodithoic acid, o-o-d1 c1-14-alkyl esters, zinc
salts (2: 1) (zddp)
cas: 68649-42-3
fraction by wt:
other rec limits: none recommended

MSDS CLBRY GARD ANTI RUST SAE 30

Hazards


ld50 lc50 mixture: oral toxicity: not determined.

carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye contact: can cause mild irritation. Skin contact: may
cause irritation. Prolonged or repeated contact may result in dermatitis.

inhalation: overexposure of hot material may cause nonspecific disco mfort.

ingestion: do not ingest. Due to concentration of oil (70-100%) ingestion is
expected to be relatively non-toxic unless lung aspiration occurs which may
lead to chemical pneumonitis; characteri zed by pulmonary edema and
hemorrhage and may be fatal.Gastrointestinal discomfort may develop, followed
by vomiting with a further risk of aspiration.. This product has laxitive
properties and may re sult in abdominal cramps and diarrhea.

explanation of carcinogenicity: carcinogenicity: not determined. None of the
oils in this product require a cancer warning under osha (29 cfr 1910.1200).

these oils have not been listed in national toxicology program (ntp) annual
re port nor classified by iarc as: carcinogenic to humans (group 1), probably
carcinogenic to humans (group 2a), or possibly carcinogenic to humans (group
2b).

signs and symptions of overexposure: eye contact; mild irritation, discomfort,
tearing, blurred vision. Skin contact: irritation, dermititis, dryness,
chapping, reddening. Inhalation: nausea, headache, weakness. Ingestion:
relatively non -toxic. Aspiration: may lead to chemical pneumonitis,
pulmonary edema, hemorrhage, may be fatal; signs of lung involvment include
increased respiratory rate, increased heart rate, bluish dicoloration of
skin, coughing, choking, gagging. Gastrointestinal discomfort followed by
vomiting. Product has laxitive properties and may result in abdominal cramps
and diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

first aid: eye contact: flush with large amounts of water. Continue flushing
until irritation subsides. If irritation persists call doctor. If material is
hot treat for thermal burns; take to hospital. Skin: rem ove contamiated
clothing. Wash exposed skin with soap and water. If redness or irritation
occurs get medical attention. If material is hot submerge exposed area in
cold water. If severely burned, take to hospital. Inhalation: move to fresh
air. If difficult breathing, give oxygen. If breathing stopped, give
artificial respiration. Get medical attention. ingestion: do not induce
vomiting. (contd. see "other information")

Chemical Properties


hcc: v6
boiling point: >260.C, 500.F
b.P. Text: estmated
melt/freeze pt: =-17.6c, 0.F
m.P/f.P text: pour point
vapor pres: negligible at 25c, 1 atm.

vapor density: >1@stp
spec gravity: 0.89 @15.6c (7.45 lb/gal)
viscosity: 11.50cst@100c
evaporation rate & reference: negligible, (n-buac =1)
solubility in water: negligible.

appearance and odor: dark brown, clear fluiid, mild petroleum hydrocarbon odor.

percent volatiles by volume: negligible

HAZCOM Label


product id: gard anti rust sae 30
cage: 1ru67
company name: unimark oil co llc
street: 2727 roe lane
city: kansas city ks
zipcode: 66103-1543
health emergency phone: 800-451-8346
label required ind: y
date of label review: 04/16/2001
status code: a
label date: 04/16/2001
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: yes
health hazard: slight
contact hazard: slight
fire hazard: slight

Transportation

=======================================================
responsible party cage: 1ru67
trans id no: 156646
product id: gard anti rust sae 30
msds prepared date: 06/30/2000
review date: 04/16/2001
mfn: 1
net unit weight: 37.2 lbs
multiple kit number: 0
unit of issue: cn
container qty: 1
type of container: can
additional data: transportation data per manufacturer's msds.

Reactivity

Hazard and precautions: eye contact: can cause mild irritation. Skin contact:
may cause irritation. Prolonged or repeated contact may result in dermatitis.

inhalation: overexposure of hot material may cause nonspecific disco mfort.

ingestion: do not ingest. Due toconcentration of oil (70-100%) ingestion is
expected to be relatively non-toxic unless lung aspiration occurs which may
lead to chemical pneumonitis; characteriz ed by pulmonary edema and
hemorrhage and may be fatal.Gastrointestinal discomfort may develop, followed
by vomiting with a further risk of aspiration.. This product has laxitive
properties and may res ult in abdominal cramps and diarrhea.

Proper Disposal


spill release procedures: turn off ignition sources. Ventilate. Personnel
wearing protective equipment should contain spill with inert materials by
forming dikes that prevents entering sewers and waterways. Pick up large
spill with explosion-proof, non-sparking vacuum pumps, shovels, buckets and
deposit in disposal containers. Remove water spills by skimming surface or
with adsorbents. Notify authorities of large spills.

neutralizing agent: none specified by manufacturer.

waste disposal methods: place used, contaminated, or excess material into
disposable containers and dispose of in a manner consistent with local and
state regulations. Contact local environmental or health authorities for ap
profed disposal . Most used oil is reclaimed or incinerated. Under rcra it is
the responsibility of the user to determine (contd. See "ecological")
handling and storage precautions: keep containers closed when not in use. Do
not transfer to unmarked containers. Fire extinguishers should be kept
readily available. Empty containers retain product residue which may exhibit
hazards o f material, do not pressurize, cut, glaze, weld, or use for any
other purpose.

other precautions: return drums to reclamation centers for proper cleaning and
reuse. Store containers away from heat, sparks, open flames, or oxidizing
materials.

MSDS CLDSR GARD ANTI RUST SAE 30

Hazards


ld50 lc50 mixture: oral toxicity: not determined.

carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye contact: can cause mild irritation. Skin contact: may
cause irritation. Prolonged or repeated contact may result in dermatitis.

inhalation: overexposure of hot material may cause nonspecific disco mfort.

ingestion: do not ingest. Due to concentration of oil (70-100%) ingestion is
expected to be relatively non-toxic unless lung aspiration occurs which may
lead to chemical pneumonitis; characteri zed by pulmonary edema and
hemorrhage and may be fatal. Gastrointestinal discomfort may develop,
followed by vomiting with a further risk of aspiration.. This product has
laxative properties and may r esult in abdominal cramps and diarrhea.

explanation of carcinogenicity: carcinogenicity: not determined. None of the
oils in this product require a cancer warning under osha (29 cfr 1910.1200).

these oils have not been listed in national toxicology program (ntp) annual
re port nor classified by iarc as: carcinogenic to humans (group 1), probably
carcinogenic to humans (group 2a), or possibly carcinogenic to humans (group
2b).

signs and symptions of overexposure: eye contact: mild irritation, discomfort,
tearing, blurred vision. Skin contact: irritation, dermititis, dryness,
chapping, reddening. Inhalation: nausea, headache, weakness. Ingestion:
relatively non -toxic. Aspiration: chemical pneumonitis, pulmonary edema,
hemorrhage, may be fatal; signs of lung involvment include increased
respiratory rate, increased heart rate, bluish discoloration of skin, co
ughing, choking, gagging. Gastrointestinal discomfort followed by vomiting.

product has laxative properties and may result in abdominal cramps and
diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

first aid: eye contact: flush with large amounts of water. Continue flushing
until irritation subsides. If irritation persists call doctor. If material is
hot treat for thermal burns; take to hospital. Skin: rem ove contamiated
clothing. Wash exposed skin with soap and water. If redness or irritation
occurs get medical attention. If material is hot submerge exposed area in
cold water. If severely burned, take to hospital. Inhalation: move to fresh
air. If difficult breathing, give oxygen. If breathing stopped, give
artificial respiration. Get medical attention. ingestion: do not induce
vomiting. (contd. see "other information")

Chemical Properties


hcc: v6
boiling point: >260.C, 500.F
b.P. Text: estmated
melt/freeze pt: =-18.C, -.4f
m.P/f.P text: astm d 97
vapor pres: negligible at 25c, 1 atm.

vapor density: >1@stp
spec gravity: 0.89 @15.6c (7.45 lb/gal)
viscosity: 11.50cst@100c
evaporation rate & reference: negligible, (n-buac =1)
solubility in water: negligible.

appearance and odor: dark brown, clear fluiid, mild petroleum hydrocarbon odor.

percent volatiles by volume: negligible

HAZCOM Label


product id: gard anti rust sae 30
cage: 1ru67
company name: unimark oil co llc
street: 2727 roe lane
city: kansas city ks
zipcode: 66103-1543
health emergency phone: 800-451-8346 /800 451-8346
label required ind: y
date of label review: 06/06/2001
status code: a
year procured: 2001
origination code: f
chronic hazard ind: y
eye protection ind: yes
skin protection ind: yes
signal word: caution
health hazard: slight
contact hazard: slight
fire hazard: slight

Transportation

=======================================================
responsible party cage: 1ru67
trans id no: 157332
product id: gard anti rust sae 30
msds prepared date: 06/30/2000
review date: 06/06/2001
mfn: 2
net unit weight: 37 lbs
multiple kit number: 0
unit of issue: cn
container qty: 1
type of container: can
additional data: per msds, item is not regulated.

Reactivity

Hazard and precautions: eye/skin contact: can cause mild irritation. Prolonged
or repeated skin contact may result in dermatitis. Inhalation: overexposure
of hot material may cause nonspecific discomfort. Ingestion: relativl ey
non-toxic, but has aspiration hazard. Aspiration into lungs may cause
chemical pneumonitis which can be fatal.

Proper Disposal


spill release procedures: turn off ignition sources. Ventilate. Personnel
wearing protective equipment should contain spill with inert materials by
forming dikes that prevents entering sewers and waterways. Pick up large
spill with explosion-proof, non-sparking vacuum pumps, shovels, buckets and
deposit in disposal containers. Remove water spills by skimming surface or
with adsorbents. Notify authorities of large spills.

neutralizing agent: none specified by manufacturer.

waste disposal methods: all disposals must comply with federal, state, and
local regulations. The material, if spilled or discarded may be a regulated
waste. Refer to state and local regulations. Department of transportation
regulations may apply for transporting this material when spilled.

handling and storage precautions: keep containers closed when not in use. Do
not transfer to unmarked containers. Fire extinguishers should be kept
readily available. Empty containers retain product residue which may exhibit
hazards o f material, do not pressurize, cut, glaze, weld, or use for any
other purpose.

other precautions: return drums to reclamation centers for proper cleaning and
reuse. Store containers away from heat, sparks, open flames, or oxidizing
materials. disposal (contd); caution - if spilled material cleane d up using
regulated solvent, resulting waste mixture may be regulated.

MSDS CLMMR 1132 PRESERVATIVE ENGINE OIL SAE 30 MIL-L-21260D QUAL. # MP-

Hazards

Ld50 lc50 mixture: no data provided by manufacturer
health hazards acute and chronic: oral toxicity: accidental ingestion of
this material may cause irritation of digestive tract. Eye: this
material may causse eye irritation. Direct contact may cause
burning, tearing and redness. Skin: this material may cause skin
irritation. Prolonged or repeated contact may cause burning,
redness and dermititis. Inhalation: exposure to heated mist or
vapors may cause irritation to the nose and th roat.

explanation of carcinogenicity: no data provided by manufacturer
effects of overexposure: oral toxicity: accidental ingestion of this
material may cause irritation of digestive tract. Eye: this
material may causse eye irritation. Direct contact may cause
burning, tearing and redness. Skin: this material may cause skin
irritation. Prolonged or repeated contact may cause burning,
redness and dermititis. Inhalation: exposure to heated mist or
vapors may cause irritation to the nose and th roat.

medical cond aggravated by exposure: no data provided by manufacturer

First Aid

First aid: oral: if ingested, do not induce vomiting; call physician
immediately. Eye: for direct contact, flush the affected eye or
eyes with clean water. If irritation or redness persists, seek
medical attenti on. Skin: wash with soap and water, remove
contaminated clothing. If irritaiton or redness persists, seek
medical attention. Inhalation: if irritation of the nose or throat
develops, move away from so urce of exposure. If irritation
persists, seek medical attention. Additional: medical opinion is
divided for large ingestions. Emesis or lavage has been recommended
for those petroleum products which have a high oral toxicity.

Chemical Properties

Hcc: v6
boiling pt: >260.C, 500.F
b.P. Text: oil
vapor pres:
vapor density: >air
spec gravity: 0.87-0.88
ph: neutral
evaporation rate & reference:
solubility in water: negligible
appearance and odor: dark amber liquid; mild odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: conditions of high heat may cause thermal
decomposition.

hazardous decomposition products: oxides of carbon, minor amounts of
oxides of sulfur, nitrogen, phosphorus and zinc.

Proper Disposal

Waste disposal methods: disposal must be in accordance with applicable
federal, state and local regulations. Enclosed controlled
incineration is recommended unless directed otherwise by applicable
ordinances.

Ingredients List

Ingred name: lubricating oil basestock
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: zinc salt of dialkyl dithiophosphoric acid