Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Engine Lubricating Oil

NSN: 9150-00-111-0210 | Model: M21260-4-30W

A petroleum oil, a synthetically prepared product, or a combination thereof, prepared primarily for lubrication in crank cases of internal combustion engines. It usually contains additives for corrosion prevention and oxidation prevention, and may contain detergents. See also lubricating oil, general purpose. It does not include lubricating oil, aircraft piston engine.

NSN Properties and Flags
NATO Stock Number
9150-00-111-0210
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Any acceptable
Minimum Viscosity Index
75.0
Service Characteristics
Any acceptable
Quantity Within Each Unit Package
55.000 gallons
Viscosity At Rated Temp
9.30 210 degrees fahrenheit and 12.50 210 degrees fahrenheit
Drum Material Gage Number
18
Maximum Pour Point
-0.4 degrees fahrenheit
Minimum Flash Point And Test Method
428.0 degrees fahrenheit cleveland open cup
Nondefinitive Specification/std Data
30 grade and 11 type

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-111-0210 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • M21260-4-30W
  • MIL-PRF-21260
  • TECTYL 930
  • MIL-L-21260
Cage Codes:
  • Military Specifications (CAGE 81349)
  • Valvoline Inc (CAGE 72527)
Replacements:
  • 9150-00-111-0210 replaces 9150-00-111-0217
  • 9150-00-111-0210 replaces 9150-00-111-3201
  • 9150-00-111-0210 replaces 9150-00-264-3944
  • 9150-00-111-0210 replaces 9150-00-436-5292
  • 9150-00-111-0210 replaces 9150-00-985-7116
Schedule B & Trade:
  • Schedule B: 2710193020 (NAICS 324110)

    Automotive, diesel or marine engine (except turbine) lubricating oils

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    W - Rating variable

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    1
  • Unit of Measure
    Dr
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $7,743.29 to $12,905.49..
Does NSN 9150-00-111-0210 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Spain, Canada, Republic Of Korea, and Denmark
What is the NIIN of NSN 9150-00-111-0210?
001110210 or 00-111-0210
Does NSN 9150-00-111-0210 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-111-0210?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Aug 21, 1968
MSDS

Material Safety

MSDS BCZBH MIL-L-21260C,GRADE 30,LUBRICATING OIL,PETRL

First Aid

First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 260c
spec gravity: 0.8927
solubility in water: negligible
appearance and odor: bright & clear liquid

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: heat, ignition sources
hazardous decomposition products: may emit oxides of
carbon,nitrogen,sulfur & p on combustion

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum oil; wt % range: 80-95%
fraction by wt: 87.5%
acgih tlv: 5mg/cum(mist)

ingred name: additive package containing nitrogen, zinc, calcium, sulfur
& phosphorus; wt % range: 5-10
fraction by wt: 07.5%

MSDS BGWYZ MIL-L-21260D GRADE 30 QUAL MP-320

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: while this product may irritate the

First Aid

First aid: if swallowed do not induce vomiting. Call a physician
immediately. if splashed in eyes, purge with copious amounts of
water. in case of skin contact, cleanse with saterless hand
cleaner or by thorou ghly washing with soap and water.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 600f,316c
melt/freeze pt: m.P/f.P text: 0
vapor pres: 1
vapor density: 1
spec gravity: 1
evaporation rate & reference:
solubility in water: 0
appearance and odor: dark-amber-no odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: only when burning - carbon monoxide,
carbon dioxide, sulfur & nitrogen compounds
conditions to avoid polymerization: mfr said "not appliciable" in this
field.

Proper Disposal

Waste disposal methods: dispose of contaminated diking material
according to current federal, state and local laws and regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lube oil base stock/refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt: 94-96%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: proprietary additives - the composition of these is
proprietary to lubrizol, contact them for more information.

fraction by wt: 4-6%
other rec limits: none specified

MSDS BHBFY 60476-30W LUBRICATING OIL, MIL-L-21260-30W

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: manufacturer states,"product has been
used for years with no known ill effects. it contains no known
carcinogens ot mutagens as defined by osha or iarc." product is
very mildly irritating to body ti ssues. most likely hazard is
that of breathing the mist or vapors should the product be heated
or misted.

explanation of carcinogenicity: the product contains no ingredient that
is listed by iarc, ntp or osha as a carcinogen.

effects of overexposure: eye: mild irritation. Skin: possible mild
irritation. Inhaled: respiratory irritation,possible pulmonary edema
if mist is inhaled. ingested: none given by manufacturer
(supplier).

medical cond aggravated by exposure: none reported

First Aid

First aid: eye: flush w/water 15 min, hold lids open. skin: wash with
soap & water. Remove contaminated clothing and launder before
reuse. inhaled: remove to fresh air. Restore breathing if
necessary. Ingested: d o not induce vomiting. Give 2 large glasses
of milk or water and get immediate medical care. Give nothing by
mouth if unconscious. if irritation persists or is severe,see a
doctor.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 700f,371c
viscosity: 9.3-12.5 cs
solubility in water: negligible
appearance and odor: fluid oil, bland odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: may sensitize acute allergic reactions.

hazardous decomposition products: carbon dioxide,carbon monoxide

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state, local regulations.

mfr suggests recycle or if that is not practicle to incinerate.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 85.4%
other rec limits: none specified

ingred name: lubrizol 4856a (lubrizol, cleveland, oh)
fraction by wt: 12.2%
other rec limits: none specified

ingred name: lubrizol 1161 (lubrizol corp, wickliffe, oh)
fraction by wt: 2.20%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: acrylic copolymer (rohm & haas co. Philadelphia,pa)
fraction by wt: 0.2%
other rec limits: none specified

MSDS BJFMN SCT PRESERVATIVE OIL, SAE 30 MP-330

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eye/skin: irritant. Inhale: heated
mist/vapor can irritate nose & throat. Ingest: digestive tract
irritant. Chronic-skin: dermatitis.

explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.

effects of overexposure: eyes: burning, tearing & redness. Skin: burning &
redness.

medical cond aggravated by exposure: none

First Aid

First aid: eye: flush with clean water. Skin: remove soiled clothes. Wash
with soap and water. Inhalation: move away from exposure source.

ingest: do not induce vomiting. See doctor immediately.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres: < 0.01
vapor density: >air
spec gravity: 0.87-0.88
ph: 7
evaporation rate & reference: slower than ether
solubility in water: negligible
appearance and odor: dark amber liquid, mild odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none
hazardous decomposition products: thermal decomposition may yield major
amounts of carbon & minor amounts of sulfur, nitrogen, phosphorous
& zinc oxides.

Proper Disposal

Waste disposal methods: dispose of in accordance with all applicable
federal, state and local regulations. Enclosed-controlled
incineration is reccommended unless directed otherwise by
applicable ordinances.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lubricating oil base stock
cas: 64791-97-5
fraction by wt: 80-90%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)

ingred name: zinc salt of dialkyl dithiophosphoric acid
other rec limits: none specified

ingred name: the manufacturer states that the identities of ingredients
that are trade secrets are excluded from the msds list.

rtecs #: 9999999zz
other rec limits: none specified

MSDS BRSYS GARD ANTIRUST SAE 30W

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may cause transient irritation.

skin: prolonged or repeated contact may cause irritation, rash,
dermatitis. Inhalation: inhalation of heated vapors may cause
irritation of the lungs. Ingestion: may cause gastrointestinal
irritation.

effects of overexposure: eyes: transient irritation. Skin: irritation,
rash, dermatitis. Inhalation: irritation of lungs. Ingestion:
gastrointestinal irritation, diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: flush with large amounts of water. If irritation
persists, get medical attention. Skin: remove contaminated
clothing. Wash area with soap and water. If redness, rash or
irritation occurs, get me dical attention. Inhalation: move to
fresh air. If not breathing, give cpr. If breathing difficult, give
oxygen. Get medical attention. Ingestion: do not induce vomiting.

get medical attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor density: >1 air=1
spec gravity: 0.9
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: amber liquid. Oily odor.

percent volatiles by volume: nil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: temperatures over 220c (428f). Open
flames, other sources of ignition.

hazardous decomposition products: carbon monoxide, carbon dioxide,
noxious smoke.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: notify appropriate authorities of spill. Dispose
or waste in accordance with local, state and federal regulations.

materials should be recycled if possible.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrotreated paraffinic distillate
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 80-90%
other rec limits: none recommended
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist9293

ingred name: proprietary additives
fraction by wt: 8-16%
other rec limits: none recommended

ingred name: zinc compounds
fraction by wt: 0.14%
other rec limits: none recommended

MSDS BWCVK GARD ANTIRUST SAE 10, 30 & 15W-40 I/A/W MIL-L-21260D

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-may cause transient irritation.

inhalation-inhalation of heated vapors may cause irritation of the
lungs. Ingestion-may cause gastrointestinal irritation.

explanation of carcinogenicity: not carcinogenic.

effects of overexposure: skin contact-prolonged or repeated skin contact
may cause irritation, rash or dermatitis.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eye-wash with large volumes of water for 10 min. Get medical
attention. Skin-remove any contaminated clothing as soon as
possible. Wash exposed skin thoroughly with soap & water. Get
medical attention . Inhalation-remove person to fresh airif
overexposure occurs. Administer artificial respiration should
breathing stops. Ingestion-do not induce vomiting if large amounts
are swallowed. See physician

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >932f,>500c
vapor pres: na
vapor density: >1
spec gravity: 0.9
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: amber liquid with oily odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: temperatures over 220 deg. C.

hazardous decomposition products: carbon dioxide, carbon monoxide and
noxious smoke.

Proper Disposal

Waste disposal methods: all disposal must comply with federal, state and
local regulations. Caution! Should regulated solvents be used to
clean up spilled material, the resulting waste mixture may be
regulated. Material may be recycled if possible.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: distillates, hydrotreated heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 80-90%
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm

ingred name: proprietary additives
fraction by wt: 08-16%
other rec limits: none recommended

ingred name: zinc compounds
fraction by wt: 0.14%
other rec limits: none recommended

MSDS BWMBY MIL-L-21260 GRADE 30;19115

Hazards

Ld50 lc50 mixture: tlv for oil mist is 5mg/m3
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: low health hazard. Minimal
irritation on contact. Inhalation of vapors or mists when spraying
may cause irritation. Slightly toxic if swallowed.May cause lung
damage if vomited after ingesting. Chronic: dermatitis. Release
under high pressure may result in injection of oil into the skin
causing local necrosis.

explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.

effects of overexposure: eyes: minimal irritation. Skin: irritation,
skin drying on prolonged contact. Inhalation: irritation of nose
and throat. Ingestion: discomfort, nausea, diarrhea. Injection:
necrosis may be evidenced b y delayed onset of pain and tissue
damage a few hours following pressure injection.

medical cond aggravated by exposure: because of its defatting
properties, prolonged and repeated skin contact may aggravate an
existing dermatitis.

First Aid

First aid: eyes: flush with plenty of water for at least 15 minutes. If
irritation persists, see doctor. Skin: wash with soap. If
irritation persists, see doctor. Inhalation: remove victim to fresh
air. Give oxy gen/cpr if needed. See doctor. Ingestion: do not
induce vomiting. See doctor. Injection: this is a medical
emergency. See doctor immediately.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 500f,260c
melt/freeze pt: m.P/f.P text: 20.0f,-6.7c
vapor pres:
vapor density: 5
ph: 7
viscosity: 116cst
evaporation rate & reference: 0.01 (n-butyl acetate=1)
solubility in water: negligible
appearance and odor: pale oily liquid.

percent volatiles by volume: nil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon dioxide,carbon monoxide,oxides
of sulfur,aldehydes.

Proper Disposal

Waste disposal methods: dispose of in accordance with federal,state and
local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: severely solvent refined & severely hydrotreated mineral
base oils
other rec limits: none recommended

ingred name: mineral oil, petroleum distillate, solvent dewaxed (mild),
heavy paraffinic
cas: 64742-65-0
rtecs #: py8038500
other rec limits: none recommended

ingred name: mineral oil, hydrotreated (mild), heavy naphthenic
distillate, petroleum
cas: 64742-52-5
rtecs #: py8035000
other rec limits: none recommended

MSDS CCJPT GARD ANTI RUST SAE 30

Hazards

Ld50 lc50 mixture: oral toxicity: not determined.

routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: based on data from similar
matls: eye: contains matls that can cause mild irrit
w/discomfort,tear,blurr vision.Skin: contains matls that may cause
irrit.Prol/rep contact may result in derm(dryness,chappi
ng,reddening skin).Inhal: overexpo by inhal of hot matl may cause
nonspec discomfort(nau,head,weak)caution should(supple)
explanation of carcinogenicity: per msds: no warning under osha;not
listed by ntp/iarc.

effects of overexposure: mild eye irrit w/discomfort,tearing,blurred
vision.Skin irrit,derm,dryness,chapping,reddening.Nonspecifici
discomfot,nausea,headache,weakness.Aspiration may lead to chem
pneumonitis: pulm edema,hemorrh age,fatal,incr resp rate,incr heart
rate,bluish dicoloration of skin,cough,choke,gaggine.Gi: vomit.Adb
cramps,diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eye: immed flush w/lg atms of water.Cont flush til irrit
subsides.Irrit persists call dr.Matl hot treat for therm burn;take
to hosp immed.Skin: remove contamin cloth.Wash thoroughly
w/soap/water.Red/irr it occurs get med attn.Mtl hot submergein cold
water.Severely burn remove to hosp immed.Inhal: remove to fresh
air.Diffi breath use oxy.Stop breath use art resp.Get med attn if
necessary.(other preca)

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: n/determine
melt/freeze pt: m.P/f.P text: -18c pourpt
decomp temp: decomp text: np
vapor pres: negligible
vapor density: >1
spec gravity: 0.89 @15.6c
ph: np
viscosity: 11.50cst@100c
evaporation rate & reference: negl, (n-butyl acetate=1)
solubility in water: negligible.

appearance and odor: dark brown, clean liquid, mild petroleum
hydrocarbon odor.

percent volatiles by volume: neglig
corrosion rate: np

Reactivity

Stability indicator/materials to avoid: yes
avoid contact w/acids and oxidizing matls.

stability condition to avoid: avoid high temperatures & product
contamination.

hazardous decomposition products: oxides of c, zn, ca, p, s. Addnt
byproducts include hydrogen sulfide, alkyl mercaptans & other
sulfides;smoke,co2,co.

Proper Disposal

Waste disposal methods: all dispo must comply w/fed/state/loc regs.Malt
may be reg waste.Refer to state/loc regs.Dot regs apply for transpo
matl when spill.Caut: if spill matl cleanup w/reg solvt resulting
waste mix may be re g.Per rcra: user responsibility for deter haz
waste
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: aliphatic hydrocarbons
fraction by wt: 80-90%
other rec limits: none recommended

ingred name: proprietary additives
fraction by wt: 10-20%
other rec limits: none recommended

ingred name: alkaryl ethoxylated ethanol
fraction by wt:
other rec limits: none recommended

ingred name: phosphorodithoic acid, o-o-d1 c1-14-alkyl esters, zinc
salts (2: 1) (zddp)
cas: 68649-42-3
fraction by wt:
other rec limits: none recommended

MSDS CKWTJ GARD ANTI-RUST SAE 30

Hazards


route of entry inds - inhalation: yes
skin: yes
ingestion: yes
effects of exposure: eye: can cause mild eye irritation. Skin: may cause skin
irritation. Prolonged or repeated contact may result in dermatitis.

inhalation: overexposure by inhalation of hot material may cause nonspecif ic
discomfort. ingestion: ingestion is expected to be relatively non-toxic
unless lung aspiration occurs. Aspiration may lead to chemical pneumonitis,
which is characterized bypulmonary edema and hem orrhage and may be fatal.

this product has lazative properties and may result in abdominal cramps and
diarrhea.

explanation of carcinogenicity: carcinogenicity: not determined (per
manufacturer).

signs and symptions of overexposure: eyes: can cuase discomfort, tearing, or
blurring of vision. skin: prolonged or repeated contact may result in
dryness, chapping and reddening of skin. inhalation: may cause nausea,
headache, or weak ness. ingestion: may include increased respiratory rate,
increased heart rate, and a bluish discoloration of the skin. Coughing,
choking, and gagging are other noted at time of aspiration. Lazative p
roperties may result in abdominal cramps and diarrhea.

first aid: eye: immediately flush eyes with large amounts of water until
irritation subsides. If irritation persists call a physician. If material is
hot, treat for thermal burns & take victim to hospital immedi ately.

skin: remove contaminated clothing. If redness or irritation occurs, seek
medical attention. If material is hot, submerge injured area in cold water.

if victim is severely burned, remove to a h ospital immediately. inhalation:
remove to fresh air. Assist with breathing support measures if needed. skin:
do not induce vomiting. Immediately give 2 glasses of water if victim is
conscious. See medical attention.

Chemical Properties


hcc: v6
boiling point: >260.C, 500.F
b.P. Text: not determined.

vapor pres: negligible at stp
vapor density: >1 at stp
spec gravity: 0.89@15.6c(60f)
viscosity: 11.50cst@100c(212f) by
evaporation rate & reference: negligible at stp.

solubility in water: negligible in water,
appearance and odor: dark brown, clear fluid; mild petroleum hydrocarbon odor.

percent volatiles by volume: negligible

HAZCOM Label


product id: gard anti-rust sae 30
cage: 1ru67
company name: unimark oil co llc
street: 2727 roe lane
city: kansas city ks
zipcode: 66103-1543
health emergency phone: 913-236-5000
label required ind: y
date of label review: 12/19/2000
status code: a
origination code: f
chronic hazard ind: y
eye protection ind: yes
skin protection ind: yes
signal word: warning
respiratory protection ind: yes
health hazard: moderate
contact hazard: moderate
fire hazard: slight

Transportation

=======================================================
responsible party cage: 1ru67
trans id no: 155623
product id: gard anti-rust sae 30
msds prepared date: 06/30/2000
review date: 12/19/2000
mfn: 1
multiple kit number: 0
unit of issue: dr
container qty: 1
type of container: drum

Reactivity

Hazard and precautions: target organs: n/p. eye: can cause mild eye
irritation. Skin: may cause skin irritation. Prolonged or repeated contact
may result in dermatitis. inhalation: overexposure by inhalation of hot
materia l may cause nonspecific discomfort. ingestion: ingestion isexpected
to be relatively non-toxic unless lung aspiration occurs. Aspiration may lead
to chemical pneumonitis, which is characterized bypul monary edema and
hemorrhage and may be fatal. This product has lazative properties and may
result in abdominal cramps and diarrhea.

Proper Disposal


spill release procedures: remove any source of ignition. Evacuate area &
ventilate. Personnel wearing ppe should contain spill immediately with inert
materials by forming dikes. Prevent material from entering sewers &
waterway s. Large spills, once contained, may be picked up using explosion
proof equipment, containerized & disposed.

waste disposal methods: all disposals must comply with federal, state, and
local regulations. The material, if spilled or discarded may be a regulated
waste. Refer to state and local regulations. Under rcra it is the respons
ibility of the user of the product to determine at timeof disposal whether
the product meets rcra cr iteria for hazardous waste.

handling and storage precautions: keep containers closed when not in use. Do
not transfer to unmarked containers. Fire extinguishers should be kept
readily available. See nfpa 30 and osha 1910.1063-flammable and combustible
liquids. S tore containers away from heat, sparks, open flame or oxidizing
materials.

other precautions: empty containers retain product residue which may exhibit
hazards of material, therefore do not pressurize, cut, glaze, weld, or use
for any other purpose. Return drums to reclamation centers for prop er
cleaning and reuse.

MSDS CLDSS GARD ANTI RUST SAE 30

Hazards


ld50 lc50 mixture: oral toxicity: not determined.

carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye contact: can cause mild irritation. Skin contact: may
cause irritation. Prolonged or repeated contact may result in dermatitis.

inhalation: overexposure of hot material may cause nonspecific disco mfort.

ingestion: do not ingest. Due to concentration of oil (70-100%) ingestion is
expected to be relatively non-toxic unless lung aspiration occurs which may
lead to chemical pneumonitis; characteri zed by pulmonary edema and
hemorrhage and may be fatal. Gastrointestinal discomfort may develop,
followed by vomiting with a further risk of aspiration.. This product has
laxative properties and may r esult in abdominal cramps and diarrhea.

explanation of carcinogenicity: carcinogenicity: not determined. None of the
oils in this product require a cancer warning under osha (29 cfr 1910.1200).

these oils have not been listed in national toxicology program (ntp) annual
re port nor classified by iarc as: carcinogenic to humans (group 1), probably
carcinogenic to humans (group 2a), or possibly carcinogenic to humans (group
2b).

signs and symptions of overexposure: eye contact: mild irritation, discomfort,
tearing, blurred vision. Skin contact: irritation, dermititis, dryness,
chapping, reddening. Inhalation: nausea, headache, weakness. Ingestion:
relatively non -toxic. Aspiration: chemical pneumonitis, pulmonary edema,
hemorrhage, may be fatal; signs of lung involvment include increased
respiratory rate, increased heart rate, bluish discoloration of skin, co
ughing, choking, gagging. Gastrointestinal discomfort followed by vomiting.

product has laxative properties and may result in abdominal cramps and
diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

first aid: eye contact: flush with large amounts of water. Continue flushing
until irritation subsides. If irritation persists call doctor. If material is
hot treat for thermal burns; take to hospital. Skin: rem ove contamiated
clothing. Wash exposed skin with soap and water. If redness or irritation
occurs get medical attention. If material is hot submerge exposed area in
cold water. If severely burned, take to hospital. Inhalation: move to fresh
air. If difficult breathing, give oxygen. If breathing stopped, give
artificial respiration. Get medical attention. ingestion: do not induce
vomiting. (contd. see "other information")

Chemical Properties


hcc: v6
boiling point: >260.C, 500.F
b.P. Text: estmated
melt/freeze pt: =-18.C, -.4f
m.P/f.P text: astm d 97
vapor pres: negligible at 25c, 1 atm.

vapor density: >1@stp
spec gravity: 0.89 @15.6c (7.45 lb/gal)
viscosity: 11.50cst@100c
evaporation rate & reference: negligible, (n-buac =1)
solubility in water: negligible.

appearance and odor: dark brown, clear fluiid, mild petroleum hydrocarbon odor.

percent volatiles by volume: negligible

HAZCOM Label


product id: gard anti rust sae 30
cage: 1ru67
company name: unimark oil co llc
street: 2727 roe lane
city: kansas city ks
zipcode: 66103-1543
health emergency phone: 800-451-8346 /800 451-8346
label required ind: y
date of label review: 06/06/2001
status code: a
year procured: 2001
origination code: f
chronic hazard ind: y
eye protection ind: yes
skin protection ind: yes
signal word: caution
health hazard: slight
contact hazard: slight
fire hazard: slight

Transportation

=======================================================
responsible party cage: 1ru67
trans id no: 157333
product id: gard anti rust sae 30
msds prepared date: 06/30/2000
review date: 06/06/2001
mfn: 1
net unit weight: 408 lbs
multiple kit number: 0
unit of issue: dr
container qty: 1
type of container: drum
additional data: per msds, item is not regulated for transportation.

Reactivity

Hazard and precautions: eye/skin contact: can cause mild irritation. Prolonged
or repeated skin contact may result in dermatitis. Inhalation: overexposure
of hot material may cause nonspecific discomfort. Ingestion: relativl ey
non-toxic, but has aspiration hazard. Aspiration into lungs can cause
pneumonitis which can be fatal.

Proper Disposal


spill release procedures: turn off ignition sources. Ventilate. Personnel
wearing protective equipment should contain spill with inert materials by
forming dikes that prevents entering sewers and waterways. Pick up large
spill with explosion-proof, non-sparking vacuum pumps, shovels, buckets and
deposit in disposal containers. Remove water spills by skimming surface or
with adsorbents. Notify authorities of large spills.

neutralizing agent: none specified by manufacturer.

waste disposal methods: all disposals must comply with federal, state, and
local regulations. The material, if spilled or discarded may be a regulated
waste. Refer to state and local regulations. Department of transportation
regulations may apply for transporting this material when spilled.

handling and storage precautions: keep containers closed when not in use. Do
not transfer to unmarked containers. Fire extinguishers should be kept
readily available. Empty containers retain product residue which may exhibit
hazards o f material, do not pressurize, cut, glaze, weld, or use for any
other purpose.

other precautions: return drums to reclamation centers for proper cleaning and
reuse. Store containers away from heat, sparks, open flames, or oxidizing
materials. disposal (contd); caution - if spilled material cleane d up using
regulated solvent, resulting waste mixture may be regulated.