Worldwide distributor of NSN parts and consumables located in the USA.
A petroleum oil, a synthetically prepared product, or a combination thereof, prepared primarily for lubrication in crank cases of internal combustion engines. It usually contains additives for corrosion prevention and oxidation prevention, and may contain detergents. See also lubricating oil, general purpose. It does not include lubricating oil, aircraft piston engine.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Automotive, diesel or marine engine (except turbine) lubricating oils
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $1,216.30 to $2,027.16.. | |
Does NSN 9150-00-111-3199 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, National Aeronautics and Space Administration, Spain, Australia, Canada, Republic Of Korea, and Turkey | |
What is the NIIN of NSN 9150-00-111-3199? | |
001113199 or 00-111-3199 | |
Does NSN 9150-00-111-3199 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-111-3199? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Aug 23, 1968 |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: manufacturer states,"product has been
used for years with no known ill effects. it contains no known
carcinogens ot mutagens as defined by osha or iarc." product is
very mildly irritating to body ti ssues. most likely hazard is
that of breathing the mist or vapors should the product be heated
or misted.
explanation of carcinogenicity: the product contains no ingredient that
is listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: eye: mild irritation. Skin: possible mild
irritation. Inhaled: respiratory irritation,possible pulmonary edema
if mist is inhaled. ingested: none given by manufacturer
(supplier).
medical cond aggravated by exposure: none reported
First aid: eye: flush w/water 15 min, hold lids open. skin: wash with
soap & water. Remove contaminated clothing and launder before
reuse. inhaled: remove to fresh air. Restore breathing if
necessary. Ingested: d o not induce vomiting. Give 2 large glasses
of milk or water and get immediate medical care. Give nothing by
mouth if unconscious. if irritation persists or is severe,see a
doctor.
Boiling pt: b.P. Text: 700f/371c
melt/freeze pt: m.P/f.P text: 0f,-18c
spec gravity: 0.88
viscosity: 5.6-7.4 cs
solubility in water: nil
appearance and odor: fluid oil
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: heat,ignition sources such as sparks &
open flame.
hazardous decomposition products: carbon dioxide,carbon monoxide
Waste disposal methods: dispose i/a/w federal,state, local regulations.
mfr suggests recycle or if that is not practicle to incinerate.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 85.4%
other rec limits: none specified
ingred name: lubrizol 4856a (lubrizol, cleveland, oh)
fraction by wt: 12.2%
other rec limits: none specified
ingred name: lubrizol 1161 (lubrizol corp, wickliffe, oh)
fraction by wt: 2.20%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: acrylic copolymer (rohm & haas co. Philadelphia,pa)
fraction by wt: 0.2%
other rec limits: none specified
Effects of overexposure: eyes/skin: slight irrit;inhal: may irrit resp
tract if above tlv;ingest: diarrhea,upset stomach.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
spec gravity: 0.8762
solubility in water: negligible
appearance and odor: bright & clear oil, mineral oil odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: heat, ignition sources
hazardous decomposition products: when involvd in combustion,emits
oxides of c,n,aldehyd/keton
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 90-95%
other rec limits: none specified
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additive package containing sulphur, phosphorous, calcium.
fraction by wt: 5-10%
other rec limits: none specified
Effects of overexposure: eye & skin: irrit.Inhal: irrit of nasal & respir
passages.Ingest: gi irrit,nausea,vomit,diarrhea.
First aid: skin: wash w/ soap & water.Eye: flush w/ large amounts of
water,lifting lids occasionally,get med attn.Inhal: remove to fresh
air.Ingest: drink water.Induce vomit.Never give anything by mouth to
an uncons cious person.Get medical attention.
Hcc: v6
boiling pt: b.P. Text: >425f,>218c
vapor density: >1
spec gravity: 0.892
evaporation rate & reference: slower than ether
solubility in water: negligible
Stability indicator/materials to avoid: yes
avoid contact w/ strong oxidizing agents.
Waste disposal methods: small: dispose in accordance w/ local,state & fed
regulations.Large spill: destroy by incineration in accord w/
applicable regulations.Contaminated absorbent may be deposited in a
landfill in accordance w/ local,state & federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum lube oil
fraction by wt: >75%
acgih tlv: 5 mg/cum
Routes of entry: inhalation: yes skin: yes ingestion: no
explanation of carcinogenicity: no data available
effects of overexposure: due to low order of dermal & oral toxicity, the
signs & symptoms of over exposure are unknown.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes & skin may be at
increased risk from exposure.
First aid: inhalation: remove to fresh air.Get medical attention, if
needed.Eyes: immediately flush with water for 15 minutes holding
eyelids open.Get medical attention.Skin: remove contaminated
clothing.Wash first with waterless soap,then soap and
water.Ingestion: do not induce vomiting. Get immediate medical
attention.
Hcc: v6
boiling pt: b.P. Text: 600f,316c
melt/freeze pt: m.P/f.P text: 0
vapor pres: 1
vapor density: 1
spec gravity: 1
evaporation rate & reference:
solubility in water: 0
appearance and odor: dark-amber-no odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: carbon monoxide, carbon dioxide,
sulfur & nitrogen compounds
Waste disposal methods: dispose of contaminated diking material
according to current federal, state and local laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lube oil base stock/refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt: 94 - 96%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: proprietary additives - for more information, call lubrizol
corp.
fraction by wt: 4 - 6%
other rec limits: none specified
Routes of entry: inhalation: no skin: yes ingestion: no
health hazards acute and
chronic: acute-eye: irritation.Skin: irritation.Inhale: exposure to
heated mist/vapor may cause
irritation.Ingestion: irritation.Chronic-skin: dermatitis.
effects of overexposure: eye: direct contact may cause burning, tearing,
and redness.Skin: redness and burning.Inhalation: irritation to nose
and throat.Ingestion.Irritation to the digestive tract.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: eye: flush with clean water.If irritation/redness persists,see
a doctor.Skin: wash with soap & water.If irritation persists, see a
physician.Inhalation: move to fresh air.If irritation persists, see
a do ctor.Ingestion: don't induce vomiting.Call a physician.
Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres:
vapor density: >1
spec gravity: .87-.88
ph: 7
evaporation rate & reference:
solubility in water: negligible
appearance and odor: dark amber liquid, mild odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat
hazardous decomposition products: major amounts of oxides of carbon and
minor amounts of oxides of sulfur, nitrogen, phosphorus, and zinc.
Waste disposal methods: disposal should be made in accordance with all
applicable federal, state and local laws and
regulations.Enclosed-controlled incineration is recommended unless
directed otherwise by applicable ordinanc es.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum oil/base oil/lubricating oil basestock
cas: 8002-05-9
rtecs #: se7175000
fraction by wt: 80-90%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: phosphorodithioic acid, zinc salt
rtecs #: td5110000
other rec limits: none specified
ingred name: the manufacturer states that the identities of ingredients
that are trade secrets are excluded from the msds list.
rtecs #: 9999999zz
other rec limits: none specified
Ld50 lc50 mixture: tlv: 5.00 mg/m3 suggested for oil mist
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: slight eye and skin irritation.
chronic: none specified by manufacturer.
explanation of carcinogenicity: mice developed skin cancer after
repeated application of used gasoline engine oil to skin for
lifetime of the aminals.
effects of overexposure: slight eye and skin irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with plenty of water for at least 15 minutes.If
irritation persists,see doctor. Skin: wash with mild soap and water
while removing contaminated clothing and shoes. Inhalation: remove
victim t o fresh air.Give oxygen/cpr if needed.See doctor.
ingestion: do not induce vomiting. Give 1 to 2 glasses of water. See
doctor immediately.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.88
viscosity: 187 sus @100f
solubility in water: negligible
appearance and odor: dark amber liquid. Mild odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide,
incompletely burned carbon products.
Waste disposal methods: contact your local environmental officer.
dispose of in accordance with all federal, state and local
regulations. Manufacturer suggest controlled burning, processing by
approved recycling facility or dispose of at an approved waste
disposal facility.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: zinc compounds
fraction by wt: 10%
other rec limits: none specified
ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
fraction by wt: 90%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192
Ld50 lc50 mixture: ld50 (oral rat) is >15 gm/kg
routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: acute-eyes/skin: mildly irritating to
eyes.Prolonged or repeated contact with skin may cause mild
irritation and possibly dermatitis.Inhalation: mist or fumes may
cause headache, nausea, respiratory irr itation and chemical
pneumonitis. Ingestion: low toxicity. May cause vomitng and
diarrhea. Chronic-none known.
effects of overexposure: eyes & skin: mild irritation. Inhalation of mist
may cause irritation of nose and thoat. Ingestion: vomitng and
diarrhea.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhalation: remove to fresh air. Give cpr/oxygen if needed.
get medical attention. Eyes: immediately flush with warm water for
15 minutes. Get medical attention. Skin: remove & launder
contaminated cloth ing. Wash skin with soap & water. Discard
saturated leather articles. Ingestion: do not induce vomiting. Get
immediate medical help.
Hcc: v6
vapor pres:
vapor density: >12
spec gravity: 0.87
evaporation rate & reference: x1000 slower (bu ac=1)
solubility in water: nil
appearance and odor: medium amber liquid with mild odor
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidizing agents (peroxides, chlorine), strong acids
stability condition to avoid: excessive heat, open flames, formation of
oil mist
hazardous decomposition products: oxides of
carbon,sulfur,phosphorus,zinc,calcium and smoke on combustion
Waste disposal methods: dispose in approved landfill site or licensed
waste reclaimer facility. Disposal should be made in accordance
with all applicable federal, state and local laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additives containing calciium,phosphorus,zinc and nitrogen.
other rec limits: none specified
ingred name: dispersant & detergent
other rec limits: none specified
Ld50 lc50 mixture: ld50, rats is 20,000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: inhalation: no acute effects to twice
exposure limits. Skin: practically non-toxic if absorbed (ld50
greater than 2000 mg/kg). Mild irritation with prolonged or
repeated contact. Eyes: contact with th e eye may cause mild to
moderate irritation.
explanation of carcinogenicity: proprietary detergent additive
containing calcium, sulfur, prosphorus,zinc, zinc hydroxy(alklated)
benzoate plus others.
effects of overexposure: see health hazards (acute & chronic).
medical cond aggravated by exposure: prior skin disorders.
First aid: skin: wash with soap and water until no odor remains. Wash
clothing before reuse. Inhalation: move perso to fresh air. Eye:
flush thoroughly with water. If irritation persists, get medical
attention. Ingestion: give liquids and induce vomiting unless
victim is unconscious. Obtain emergency medical attention.
Hcc: v6
spec gravity: 0.87
solubility in water: negligible
appearance and odor: dark fluid, little odor
percent volatiles by volume: nil.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: extreme heat.
hazardous decomposition products: carbon monoxide and asphyxiants
Waste disposal methods: consult your local environmental officer. Follow
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye irritation, skin irritation,
respiratory tract irritation, gastrointestinal disturbances.
explanation of carcinogenicity: carcinogens not normally present in
common composition.
effects of overexposure: eyes/skin: slight irritiation. Inhalation: may
irritate respiratory tract if above tlv. Ingestion: diarrhea, upset
stomach.
medical cond aggravated by exposure: none known.
First aid: inhalation: remove to fresh air, give cpr/o2 if needed.
eyes/skin: flush with large amounts water for 15 minutes. Consult
physician if irritation persists. Ingestion: rinse mouth. Do not
induce vomtii ng. Contact a physician.
Hcc: v6
boiling pt: b.P. Text: not known
melt/freeze pt: m.P/f.P text: not known
vapor pres: not known
vapor density: not known
spec gravity: 0.8762
solubility in water: negligible
appearance and odor: bright & clear oil, mineral oil odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: heat, ignition sources
hazardous decomposition products: when involvd in combustion,emits
oxides of c,n,aldehyd/keton
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 90-95%
other rec limits: none specified
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additive package containing sulphur, phosphorous, calcium.
fraction by wt: 5-10%
other rec limits: none specified
Ld50 lc50 mixture: tlv for oil mist is 5 mg/m3.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- eyes: may cause mild irritation.
skin: prolonged/repeated contact may cause irritation and
dermatitis. Inhalation: oil mist may cause upper respiratory tract
irritation. Ingestion: unlikely. May ha ve aspiration hazard.
chronic- may cause dermatitis.
effects of overexposure: may cause eye, skin and respiratory tract
irritaiton.
medical cond aggravated by exposure: pre-existing skin disorders may be
more susceptible to this material.
First aid: get medical attention if symptoms persist. Skin: remove
contaminated clothing. Wash skin with soap & water. Eye: flush with
water for 15 minutes, holding eyelids open. Inhaled: remove to fresh
air. Oral: do not induce vomiting. If vomiting occurs
spontaneously, keep head below hips to prevent aspiration of liquid
into lungs. Get medical attention.
Hcc: v6
melt/freeze pt: m.P/f.P text: not known
spec gravity: not known
solubility in water: negligible
appearance and odor: dark fluid, little odor
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: extreme heat.
hazardous decomposition products: carbon monoxide and carbon dioxide
Waste disposal methods: consult your local environmental officer. Follow
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additives
other rec limits: none recommended
osha pel: not established.
acgih tlv: not established.
Ld50 lc50 mixture: no data
routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: potential health effects: eye: can
cause eye irritation. Symptoms include stinging, tearing, redness,
and swelling of eyes. Skin: may cause mild skin irritation.
symptoms may include redness and burni ng of skin. Swallowing:
swallowing small amounts of this material during normal handling is
not likely to cause harmful effects. Swallowing large amounts may
be harmful. Inhalation: breathing of vapo r or mist is possible.
sysmptoms of exposure: stomach or intestinal upset (nausea,
vomiting, diarrhea), irritation (nose, throat, airways).
explanation of carcinogenicity: no data
effects of overexposure: eye: can cause eye irritation. Symptoms include
stinging, tearing, redness, and swelling of eyes. Skin: may cause
mild skin irritation. Symptoms may include redness and burning of
skin. Inhalation: br eathing of vapor or mist is possible.
sysmptoms of exposure: stomach or intestinal upset (nausea,
vomiting, diarrhea), irritation (nose, throat, airways).
medical cond aggravated by exposure: not provided
First aid: eyes: flush gently with water while holding eyelids apart. If
symptoms persist, seek medical attention. Skin: remove contaminated
clothing. Wash exposed area with soap and water. If symptoms
persist, seek medical attention. Swallowing: do not induce
vomiting, material is an aspiration hazard. If individual is drowsy
or unconscious, place on left side with head down. Seek medical
attention. If poss ible, do not leave individual unattended.
inhalation: move to fresh air. If symptoms persist, seek medical
attention. If breathing is difficult, administer oxygen. Keep
person warm and quiet; seek imm ediate medical attention.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: no data
melt/freeze pt: m.P/f.P text: no data
decomp temp: decomp text: no data
vapor pres: no data
vapor density: no data
spec gravity: .880@60.00f
ph: no data
voc grams/liter: 7.36
evaporation rate & reference: slower than ethyl ether
solubility in water: not provided
appearance and odor: amber, petroleum odor
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: not provided
hazardous decomposition products: may form: carbon dioxide and carbon
monoxide, various hydrocarbons.
Waste disposal methods: dispose of in accordance with all applicable
local, state, and federal regulations.
Ingred name: aliphatic petroleum distillates
cas: 64742-65-0
rtecs #: py8038500
minumum % wt: 79.
maxumum % wt: 89.
other rec limits: not provided
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: detergent/dispersant engine oil package
minumum % wt: 9.
maxumum % wt: 19.
ingred name: lube oil additive
minumum % wt: 1.
maxumum % wt: 7.
ingred name: zinc compounds
cas: 68649-42-3
minumum % wt: 2.
maxumum % wt: 2.
ld50 lc50 mixture: oral toxicity not determined.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye: can cause mild eye irritation and discomfort. Skin:
avoid prolonged skin contact. May cause skin irritation. Inhalation:
overexposure by inhalation of hot material can cause nonspecific discomfor t.
caution should be taken to prevent forming aerosol or misting of this product
without proper respiratory protection. Ingestion: do not ingest. Due to the
expected concentration of oil (70-100%) ing estion is expected to be
relatively nontoxic unless lung aspriation occurs. This product has laxitive
properties and may result in abdominal cramps and diarrhea.
explanation of carcinogenicity: per msds: carcinogenicty: not determined.
signs and symptions of overexposure: eye: irritation, tearing, blurring of
vision. Skin: irritation, dryness, chapping and redenning of skin.
inhalation: nausea, headache, weakness. Ingestion: aspiration can lead to
chemical pneumonitis, pulmonary edema and hemorrhage, lung involvement
include increased respiratory rate, increased heart rate, bluish
discoloration of skin. Coughing, choking and gagging. Gastrointestinal
discomfort may develop followed by vomiting. This product has laxitive
properties and may result in abdominal cramps and diarrhea.
medical cond aggravated by exposure: none specified by manufacturer.
first aid: eye: immediately flush with large amounts of water, continue
flushing until irritation subsides. If irritation persists, call physician.
if material is hot, treat for thermal burns, take victim to ho spital
immediately. Skin: remove contaminated clothing. Wash area thoroughly with
soap & water. If redness/irritation occur get medical help. If material
is hot, submerge injured area in cold water. I f severely burned, take to
hospital immediately. Wash contaminated clothing before reuse. Inhalation: if
overcome by inhalation of hot vapors, remove to fresh air. Use oxygen if
breathing is difficult or artificial (see other information)
hcc: v6
boiling point: >260.C, 500.F
b.P. Text: expected
melt/freeze pt: =-36.1c, -33.F
m.P/f.P text: pour point
vapor pres: negligible @ stp
vapor density: >1@stp
spec gravity: 0.882
viscosity: 6.3cst @100c
evaporation rate & reference: neglgible,(nbuac=1)
solubility in water: negligible
appearance and odor: mild petroleum hydrocarbon odor, dark brown, clear fluid
percent volatiles by volume: neglig
product id: gard anti rust sae 10w, preservation break-in oil
cage: 1ru67
company name: unimark oil co llc
street: 2727 roe lane
city: kansas city ks
zipcode: 66103-1543
health emergency phone: 913-236-5000
label required ind: y
date of label review: 06/02/2001
status code: a
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
health hazard: slight
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: 1ru67
trans id no: 157240
product id: gard anti rust sae 10w, preservation break-in oil
msds prepared date: 06/30/2000
review date: 06/02/2001
mfn: 2
multiple kit number: 0
unit of issue: cn
container qty: 0
type of container: can
Hazard and precautions: target organs: n/p. eye: can cause mild eye irritation
and discomfort. Skin: avoid prolonged skin contact. May cause skin
irritation. Inhalation: overexposure by inhalation of hot material can cause
nonspecific discomfort.
spill release procedures: immediately turn off/isolate any ignition source.
evacuate area & ventilate. Personnel wearing proper protective equipment
should contain spill immediately with inert material (sand, earth, chemical s
pill pads of cotton) by forming dike. Dikes should be placed to contain spill
in manner that will prevent material from entering sewers and waterways.
large spill, once contained, may(see sup data)
neutralizing agent: not provided
waste disposal methods: dispose of in accordance with local, state &
federal regualtions. Spilled material may be regulated waste. Refer to state
& local regulations. Department of transportation regs may apply if
transporti ng spilled material. If spilled material is cleaned up using
regulated solvent, the resulting waste may be regulated.
handling and storage precautions: keep containers closed when not in use. Do
not transfer to unmarked containers. Keep fire extinguishers available. See
nfpa 30 & osha 1910.106. Empty containers contain residue which may
exhibit mater ial hazards. Do not pressurize, cut, glaze, weld or use for
other purposes.
other precautions: return drums to reclamation centers. Store containers away
from heat, sparks, open flame or other oxidizing materials.