NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A fluid of petroleum origin and additives generally used as a combination power-transmission medium, hydraulic control fluid, heat transfer medium, bearing surface lubricant, and gear lubricant expressly manufactured for automatic transmissions, where specified. Excludes hydraulic fluid, petroleum base.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $3,220.84 to $5,368.07.. | |
| Does NSN 9150-00-118-1112 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, and Portugal | |
| What is the NIIN of NSN 9150-00-118-1112? | |
| 001181112 or 00-118-1112 | |
| Does NSN 9150-00-118-1112 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-118-1112? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Apr 13, 1973 | |
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-inhalation of mist may cause
irritation. Ingestion: no ill effects expected. Minute amounts
aspirated into lungs may cause pulmonary injury. Eye: irritation.
skin: not normally expected to cause ill effects.
chronic-prolonged/repeatedskin contact may cause irritation.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: skin and eye irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhalation: remove to fresh air. Eyes: immediately flush with
plenty of water for 15 minutes holding eyelids open. Ge medical
attention. Skin: remove excess with cloth or paper. Wash
thouroughly with s oap and water. Ingestion: get immediatemedical
attention. Do not induce vomiting.
Hcc: v6
spec gravity: 0.890
solubility in water: negligible,
appearance and odor: dark oily with mineral oil odor
Stability indicator/materials to avoid: yes
strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.
stability condition to avoid: open flames
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of phosphorous, sulfur, and possibly hydrogen sulfide.
Waste disposal methods: disposal should be made in accordance with all
applicable federal, state and local laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: zinc dialkyl dithiophosphate
cas: 68457-79-4
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhalation- irritating. Eyes-
irritating. Skin- irritating. Ingestion- mild abdominal distress.
chronic: none specified by manufacturer.
explanation of carcinogenicity: none
effects of overexposure: inhalation: coughing, wheezing, shortness of
breath. Eyes: redness, tearing. Skin: redness, rash. Ingestion:
nausea, vomiting, diarrhea, cramps.
medical cond aggravated by exposure: preexisting skin and respiratory
disorders may be aggravated by exposure.
First aid: inhalation: remove to fresh air. Eyes: flush with plenty of
water for 15 minutes. See doctor. Skin: remove contaminated
clothing. Wash hands with soap and water. Ingestion: do not induce
vomiting. See doctor.
Hcc: v6
melt/freeze pt: m.P/f.P text: -40f,-40c
spec gravity: 0.88
solubility in water: negligible
appearance and odor: amber oil with hydrocarbon odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: open flame and other sources of ignition
hazardous decomposition products: oxides of carbon
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: distillates, hydrotreated heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 50-60%
other rec limits: none specified
osha pel: 300 ppm
acgih tlv: 300 ppm
ingred name: hydrotreated middle petroleum distillate
cas: 64742-46-7
rtecs #: jn9379645
fraction by wt:
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: mineral oil, petroleum distillates, hydrotreated light
naphthenic
cas: 64742-53-6
rtecs #: py8036000
fraction by wt:
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: polymeric additive in oil (poly-methacrylate)
fraction by wt: 10-15%
other rec limits: none specified
ingred name: additive package containing zinc dialkyldithiophosphate
fraction by wt: 5-6%
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: inhalation of vapor may cause
upper respiratory irritation. Contact may cause mild skin and eye
irritation. Lube oils are no more than mildly toxic if swallowed.
chronic: prolonged or repeated exposure may cause dermatitis,
folliculitis or oil acne.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: inhalation: coughing, wheezing, shortness of
breath. Eyes: redness, tearing. Skin: redness, rash. Ingestion:
nausea, vomiting, diarrhea, cramps.
medical cond aggravated by exposure: preexisting skin and respiratory
disorders may be aggravated by exposure.
First aid: inhalation-remove to fresh air & provide oxygen if needed.
eyes-flush with plenty of water for 15 minutes while holdind lids
open. Get medical attention. Skin-remove contaminated clothing.
wash hands with soap and water. Get medical attention if symptoms
occur. Ingestion: do not induce vomiting. In general no treatment
needed unless large amount ingested. However, get medical
attention.
Hcc: v6
melt/freeze pt: m.P/f.P text: -40f,-40c
spec gravity: 0.8794
solubility in water: negligible
appearance and odor: amber oil with slight hydrocarbon odor
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: heat, open flame, other sources of
ignition and oxidizers.
hazardous decomposition products: thermal decomposition products depend
on combution conditions.Complex mixture of vapor,gases,solid &
liquid will evolve.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Environmental data: tsca-yes; 40 cfr 82-no;sara
313-yes, zinc compounds; sara 311/312-chronic health. Massachusetts
rtk- solvent refi ned, hydrotreated light naphthenic distillate.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: distillates, hydrotreated heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 0-60%
other rec limits: none specified
osha pel: 300 ppm
acgih tlv: 300 ppm
ingred name: hydrotreated middle petroleum distillate
cas: 64742-46-7
rtecs #: jn9379645
fraction by wt: 0-25%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: mineral oil, petroleum distillates, hydrotreated light
naphthenic
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 0-25%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: mineral oil, petroleum distillate, solvent dewaxed
(severe), heavy paraffinic
cas: 64742-65-0
rtecs #: py8038501
fraction by wt: 0-90%
other rec limits: none recommended
ingred name: polymeric additive in oil
fraction by wt: 5-15%
other rec limits: none specified
ingred name: additives containing zinc dialkyl dithiophosphate
fraction by wt: 1-6%
other rec limits: none recommended
Ld50 lc50 mixture: product's ld50 (oral rat) was not stated
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: considered no more than minimally
irritating. Skin: considered to be no more than minimally
irritating. May cause dermatitis, folliculitis or oil acne.
inhalation: of oil mist or vapor from high tem peratures may cause
upper respiratory irritation. Ingestion: generally considered not
more than slightly toxic.
explanation of carcinogenicity: product & its ingredients are not listed
aas carcinogens by ntp, iarc or osha.
effects of overexposure: eye: minimal irritation. Skin: minimal
irritation. May cause dermatitis, folliculitis or oil acne.
inhalation: of oil mist or vapor from high temperatures may cause
upper respiratory irritation. Ingestio n: not more than slightly
toxic.
medical cond aggravated by exposure: preexisitng skin & respiratory
disorders may be aggravated by exposure to this product.
First aid: if irritation persists or is severe, get medical attention.
eye: flush w/water for 15 min. Skin: wash w/soap & water. Remove
contaminated clothing & launder before reuse. Inhaled: remove from
exposure. A id or restore breathing as needed. Ingested: do not
induce vomiting. No treatment necessary unless a large quantity is
ingested.However, get medical attention.
Hcc: v6
nrc/state lic num: none
melt/freeze pt: m.P/f.P text: -35f,-37c
vapor pres:
spec gravity: 0.8794
solubility in water: negligible
appearance and odor: amber oil, slight hydrocarbon odor
Stability indicator/materials to avoid: yes
oxidizing materials
stability condition to avoid: heat, open flames
hazardous decomposition products: complex mixture or airborne solid,
liquid, particulates & gases will evolve at pyrolysis.
Waste disposal methods: dispose of properly. Not a rcra hazardous waste.
product is considered an oil under the clean water act. Report
spills causing a sheen on surface waters to national response
center.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum oil - highly refined
fraction by wt: 80-90%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additives
fraction by wt: 15-20%
other rec limits: none recommended
ingred name: zinc compound
fraction by wt: 1-2%
other rec limits: none recommended
Ld50 lc50 mixture: product's ld50 (oral rat) was not stated
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: considered no more than minimally
irritating. Skin: considered to be no more than minimally
irritating. May cause dermatitis, folliculitis or oil acne.
inhalation: of oil mist or vapor from high tem peratures may cause
upper respiratory irritation. Ingestion: generally considered not
more than slightly toxic.
explanation of carcinogenicity: product & its ingredients are not listed
aas carcinogens by ntp, iarc or osha.
effects of overexposure: eye: minimal irritation. Skin: minimal
irritation. May cause dermatitis, folliculitis or oil acne.
inhalation: of oil mist or vapor from high temperatures may cause
upper respiratory irritation. Ingestio n: not more than slightly
toxic.
medical cond aggravated by exposure: preexisitng skin & respiratory
disorders may be aggravated by exposure to this product.
First aid: if irritation persists or is severe, get medical attention.
eye: flush w/water for 15 min. Skin: wash w/soap & water. Remove
contaminated clothing & launder before reuse. Inhaled: remove from
exposure. A id or restore breathing as needed. Ingested: do not
induce vomiting. No treatment necessary unless a large quantity is
ingested.However, get medical attention.
Hcc: v6
nrc/state lic num: none
melt/freeze pt: m.P/f.P text: -35f,-37c
vapor pres:
spec gravity: 0.8794
solubility in water: negligible
appearance and odor: amber oil, slight hydrocarbon odor
Stability indicator/materials to avoid: yes
oxidizing materials
stability condition to avoid: heat, open flames
hazardous decomposition products: complex mixture or airborne solid,
liquid, particulates & gases will evolve at pyrolysis.
Waste disposal methods: dispose of properly. Not a rcra hazardous waste.
product is considered an oil under the clean water act. Report
spills causing a sheen on surface waters to national response
center.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum oil - highly refined
fraction by wt: 80-90%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additives
fraction by wt: 15-20%
other rec limits: none recommended
ingred name: zinc compound
fraction by wt: 1-2%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat): > 5 g/kg
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: considered no more than minimally
irritating. Skin: considered to be no more than mildly irritating.
prolonged and repeated contact may result in various skin disorders
such as dermatitis, folli culitis or oil acne. Inhalation: vapor
(generated at high temperatures) or oil mist may result in mild
irritation of the upper respiratory tract. Ingestion: generally
considered no more than slightly toxic.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by internation agency for research on
cancer (iarc), national toxicology program (ntp) or occupational
safety and health administratio n (osha).
effects of overexposure: irritation, dermatitis, follicultitis, oil
acne.
medical cond aggravated by exposure: pre-existing skin and respiratory
disorders may be aggravated by exposure to this product.
First aid: eye: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing and
wipe excess off. Wash with soap and water or a waterless hand
cleaner fol lowed by soap and water. If irritation occurs, get
medical attention. Inhalation: remove victim to fresh air and
provide oxygen if breathing is difficult. Get medical attention.
ingestion: do not indu ce vomiting. In general no treatment is
necessary unless large quantities of product are ingested. However,
get medical attention.
Hcc: v6
boiling pt: b.P. Text: not available
melt/freeze pt: =-37.2c, -35.F
vapor pres:
spec gravity: 0.8794
viscosity: 9.4 cs @ 212f
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: amber oil, slight hydrocarbon odor
Stability indicator/materials to avoid: yes
oxidizing materials.
stability condition to avoid: avoid heat, open flames and oxidizing
materials.
hazardous decomposition products: highly dependent on the combustion
conditons. A complex mixture of airborne solid, liquid,
particulates and gases will evolve when this material undergoes
pyrolysis or combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: if this product becomes a waste , it would not
be a hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local regulations.
Ingred name: additives
minumum % wt: 15.
maxumum % wt: 20.
other rec limits: none recommended
ingred name: zinc compound
minumum % wt: 1.
maxumum % wt: 2.
other rec limits: none recommended
ingred name: mixture of highly refined petroeum oils may contain:
64742-54-7, 64742-46-7, 64742-53-6, 64742-65-0
minumum % wt: 80.
maxumum % wt: 90.
Ld50 lc50 mixture: ld50 (oral, rat): > 5 g/kg
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: lubricating oils are generally
considered no more than minimally irritating. Skin: lubricating
oils are generally considered to be no more than mildly irritating.
prolonged and repeated contact m ay result in various skin
disorders such as dermatitis, folliculitis or oil acne.
inhalation: inhalation of vapor (generated at high temperatures) or
oil mist may result in mild irritation of the upp er respiratory
tract. ingestion: lubricating oils are generally considered no
more than slightly toxic if swallowed.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by internation agency for research on
cancer (iarc), national toxicology program (ntp) or occupational
safety and health administratio n (osha).
effects of overexposure: irritation as noted above.
medical cond aggravated by exposure: pre-existing skin and respiratory
disorders may be aggravated by exposure to this product.
First aid: eye-flush with water for 15 mins while holding eyelids open.
get medical attention. Skin-remove contaminated clothing & wipe
excess off. Wash with soap & water or a waterless hand cleaner
followed by soap & water. If irritation occurs, get medical
attention. Inhalation-remove victim to fresh air & provide oxygen
if breathing is difficult. Get medical attention. Ingestion-do not
induce vomiting. In general no treatment is necessary unless large
quantities of product are ingested. However, get medical attention.
*note-emesis induction is unnecessary in high viscosity, low
volatility products, i. E., most oils & greases.
Hcc: v6
boiling pt: b.P. Text: not available
melt/freeze pt: =-37.2c, -35.F
vapor pres:
spec gravity: 0.8794
viscosity: 9.4 cs @ 212f
evaporation rate & reference: not available(nbuac=1)
solubility in water: negligible
appearance and odor: amber oil, slight hydrocarbon odor.
Stability indicator/materials to avoid: yes
oxidizing materials.
stability condition to avoid: avoid heat, open flames and oxidizing
materials.
hazardous decomposition products: carbon monoxide, sulfur oxides,
phosphorus oxides, hydrogen sulfide and other unidentified organic
compounds may be formed upon combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: if this product becomes a waste , it would not
be a hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local regulations.
Ingred name: highly refined petroleum oils *may contain: 64742-54-7,
64742-46-7, 64742-65-0.
minumum % wt: 80.
maxumum % wt: 90.
ingred name: additives containing: zinc compounds (1-2%).
minumum % wt: 15.
maxumum % wt: 20.