NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed primarily for the lubrication of ball and roller bearings operating at constant or intermittent high temperatures. It does not include grease, automotive and artillery; grease, aircraft; grease, aircraft and instrument; grease, silicone insulated electric motor; and grease, ordnance bearing and ammunition.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $9,001.26 to $15,002.10.. | |
| Does NSN 9150-00-141-6771 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Brazil, Spain, New Zealand, Italy, and Greece | |
| What is the NIIN of NSN 9150-00-141-6771? | |
| 001416771 or 00-141-6771 | |
| Does NSN 9150-00-141-6771 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-141-6771? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1963 | |
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: acute: eye: may be mildly irritating.
skin: release during high pressure usage may result in injection of
oil into the skin causing local necrosis. Inhalation: not expected
to be a relevant route of expo sure; high temperature vapors
irritate respiratory tract. Ingestion: low level of toxicity.
chronic: skin disorders.
explanation of carcinogenicity: iarc & ntp have found sufficient
evidence of carcinogenicity in animals for sodium chromate. Follow
safety procedures.
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
solubility in water: insoluble
appearance and odor: smooth, yellow-gray; slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone
cas: 63148-52-7
fraction by wt: 40-50%
other rec limits: none specified
ingred name: teflon (tetrafluoro ethylene polymer)
cas: 116-14-3
rtecs #: kx4025000
fraction by wt: 40-50%
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: barium dinonylnaphtalne sulfonate
cas: 25619-56-1
rtecs #: qm4450000
fraction by wt:
other rec limits: none specified
osha pel: 0.5 mg/m3 (as ba)
acgih tlv: 0.5 mg/m3 (as ba)
ingred name: organophylic clay
cas: 71011-25-1
fraction by wt:
other rec limits: none specified
ingred name: sodium chromate (sara iii)
cas: 7775-11-3
rtecs #: gb2955000
fraction by wt:
other rec limits: none specified
osha pel: 0.1 ppm cro3;ceiling
acgih tlv: 0.05 mg cr/m3; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Effects of overexposure: eye: irrt. Skn,inhl: none. Ingest: gi irrt,diarr
First aid: eye: flush 15 min w/ample water. Ingest: induce vomit. Call
physician all cases if symptoms persist.
Hcc: v6
solubility in water: neg
appearance and odor: green colored grease
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
none
stability condition to avoid: none
Waste disposal methods: landfill or incinerate iaw all laws & regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone compound
fraction by wt: 100%
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: eye contact: irritation. Skin contact:
prolonged or repeated ocntact may cause dermatitis, folliculitis or
oil acne. Release under high pressure may result in injection
causing local necrosis. Inhalat ion: temporary influenze-like
symptoms.Ingestion: no specific information identified.
explanation of carcinogenicity: iarc & ntp have determined that there is
evidence for the carcinogenicity in experimental animals of sodium
chromate.
effects of overexposure: eye: irritation. Skin: dermatitis,
folliculitis, oil acne, local necrosis is evidenced by delayed
onset of pain and tissue damage a few hours following injection.
inhalation: "polymer fume fever", fev er, cough, malaise.
medical cond aggravated by exposure: persons with a history of skin and
respiratory disorders may be at increased risk from exposure.
First aid: eye contact: flush with water for 15 minutes while holding
eyelids open. Get medical attention. Skin contact: remove
contaminated clothing and wipe excess off. Wash with soap and water
or a waterless hand cleaner followed by soap and water. If
irritation persists, get medical attention. If material in injected
under the skin, get medical attention promptly. Ingestion: do not
induce vomiting.
Hcc: v6
solubility in water: insoluble
appearance and odor: smooth yellow-grey, slight odor
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: avoid heat and open flame.
hazardous decomposition products: thermal decomposition gases may
include tetrafluorethylene, hexafluoropropylene,
perfluorisobutylene & carbonyl fluoride
Waste disposal methods: contains barium and chromate. Dispose of as
required for materials containing extractable barium and chromium.
epa waste number d005 unless extractable barium and/or chromium
waste is lower than epa l imit.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone
cas: 63148-52-7
fraction by wt: 40-50% %
other rec limits: none specified
ingred name: teflon (tetrafluoro ethylene polymer)
cas: 116-14-3
rtecs #: kx4025000
fraction by wt: 40-50% %
other rec limits: none specified
ingred name: barium dinonylnaphtalne sulfonate
cas: 25619-56-1
fraction by wt:
other rec limits: none specified
osha pel: 0.5 mg/m3 (as ba)
acgih tlv: 0.5 mg/m3 (as ba)
ingred name: organophylic clay
cas: 71011-25-1
fraction by wt:
other rec limits: none specified
ingred name: sodium chromate (sara iii)
cas: 7775-11-3
rtecs #: gb2955000
fraction by wt:
other rec limits: none specified
osha pel: 0.1 ppm cro3;ceiling
acgih tlv: 0.05 mg cr/m3; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: other components
fraction by wt:
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: may be mildly irritating.
skin: release during high pressure usage may result in injection of
oil into the skin causing local necrosis. Inhalation: not expected
to be a relevant route of expo sure; high temperature vapors
irritate respiratory tract. Ingestion: low level of toxicity.
chronic: skin disorders.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: not given
vapor density: not given
spec gravity: not given
evaporation rate & reference: not given
solubility in water: negligible
appearance and odor: green colored grease
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phenylmethyl polysiloxane
other rec limits: none recommended
ingred name: polytetrafluroethylene thickener
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat): 1.75 g/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product may be corrosive to eyes.
product is irritating to skin and may cause skin sensitization.
inhalation of fumes may cause temporary influenze-like symptoms
(polymer fume fever). Considered to ha ve a low order of acute oral
toxicity. Prolonged or repeated skin contact may cause dermatitis,
folliculitis, oil acne.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are confirmed or suspected
carcinogens.
effects of overexposure: eye irritation/burns, skin irritation, rashes,
local necrosis as evidenced by onset of pian and tissue damage a
few hours following injection, dermatitis, folliculitis, oil acne,
fever, cough, malaise .
medical cond aggravated by exposure: preexisting eye,skin and
respiratory disorders may be aggravated by this product.
First aid: eyes: flush with water.Get medical attention. Skin: remove
contaminated clothing;wipe excess from skin and flush with
water.Follow with soap and water.Inhalation: remove to fresh
air.Give oxygen for diff icult breathing.Get medical
help.Ingestion: do not induce vomiting. Though no treatment is
nescessary unless large quantities are ingested, get medical
advice.Physicians: emesis induction is unescessary
Hcc: v6
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
decomp temp: decomp text: not given
vapor pres: not given
vapor density: not given
spec gravity: not given
viscosity: not given
evaporation rate & reference: not given
solubility in water: insoluble
appearance and odor: smooth, white semi-solid, slight odor
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents
stability condition to avoid: avoid heat, flames.
hazardous decomposition products: a complex mixture of airborne solids,
fluorine & sulfur oxides, liquid particulates and gases will
evolve.
Waste disposal methods: place in an appropiate disposal facility in
complinace with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone
cas: 63148-52-7
fraction by wt: 40-50%
other rec limits: none recommended
ingred name: tetrafluoroethylene, inhibited
cas: 116-14-3
rtecs #: kx4000000
fraction by wt: 40-50%
other rec limits: none recommended
ingred name: minor additives
fraction by wt: 5-10%
other rec limits: none recommended
osha pel: none recommended
acgih tlv: none recommended
ingred name: petroleum sulfonate
cas: 25619-56-1
fraction by wt: 1-2%
other rec limits: none recommended
Ld50 lc50 mixture: not provided
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: product may be corrosive
to the eyes. Product is irritating to the skin & a sensitizer. Skin
contact: prolonged or repeated contact may cause various skin
disorders such as dermatitis, fo lliculitis or oil acne. Release
during high pressure usage may result in injection of oil into the
skin causing local necrosis. Inhalation: inhaling fumes of
decomposition products can induce temporar y influenze-like
symptoms which are described as "polymer fume fever". These
symptoms include fever, cough & malaise. Ingestion: generally
considered to have a low order of acute oral toxicity.
explanation of carcinogenicity: this product and its components are not
classified as carcingogens by international agency for research on
cancer (iarc), national toxicology program (ntp) or occupational
safety and health administra tion (osha).
effects of overexposure: irritation. Skin sensitization (allergy) may be
evidenced by rashes. Local necrosis is evidenced by delayed onset
of pain and tissue damage a few hours following injection.
medical cond aggravated by exposure: preexisting eye and skin disorders
may be aggravated by exposure to this product.
First aid: eye contact: flush with plenty of water for at least 15
minutes while holding eyelids open. Rinse continuously while
getting medical aid. Skin contact: remove contaminated clothing.
wipe excess off. W ash with soap & water or waterless handcleaner
followed by soap & water. If irritation persists, get medical
attention. If material is injected under skin, get medical aid
promptly. Inhalation: remov e victim to fresh air. Provide oxygen
if breathing is difficult. Get medical attention. Ingestion: do not
induce vomiting. In general no treatment is necessary unless large
quantities of product are i ngested. However, get medical advice.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
decomp temp: decomp text: not provided
vapor pres: not available
spec gravity: not available
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: smooth, white semi-solid, slight odor
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flames.
hazardous decomposition products: thermal decomposition products are
dependent on combustion conditions. A complex mixture of airborne
solids, fluorine, sulfur oxides, liquid particulates and gases will
evolve when undergoes pyrolysis.
Waste disposal methods: contains barium. Under epa-rcra (40 cfr 261.24),
a waste is hazardous if it exhibits the characteristic of toxicity
based on an extracted value of >100 mg/l barium (waste number d005)
as measured by t oxicity characteristics leaching procedure (tclp).
alternatively, material may be recycled. Check lo cal and state
regulations.
Ingred name: silicone
cas: 63148-52-7
minumum % wt: 40.
maxumum % wt: 50.
other rec limits: none recommended
ingred name: additives
minumum % wt: 5.
maxumum % wt: 10.
other rec limits: not provided
ingred name: barium dinonylnaphthalene sulfonate
cas: 25619-56-1
minumum % wt: 1.
maxumum % wt: 2.
other rec limits: none recommended
ingred name: polytetrafluoroethylene
cas: 9002-84-0
rtecs #: kx4025000
minumum % wt: 40.
maxumum % wt: 50.
other rec limits: not provided