Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Machine Tool Slideway Lubricating Oil

NSN: 9150-00-145-0112 | Model: A-A-59113

A refined mineral oil, with or without additives, prepared primarily for lubricating machine tool slideways.

NSN Properties and Flags
NATO Stock Number
9150-00-145-0112
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Petroleum oil and petroleum base
Service Characteristics
Corrosion resistive
Quantity Within Each Unit Package
5.000 gallons
Viscosity At Rated Temp
65.00 100 degrees fahrenheit and 75.00 100 degrees fahrenheit
Maximum Pour Point
30.0 degrees fahrenheit
Minimum Flash Point And Test Method
300.0 degrees fahrenheit cleveland open cup
Nondefinitive Specification/std Data
I type

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-145-0112 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • A-A-59113
  • MIL-L-46017
Cage Codes:
  • Federal Commercial Item Description (CAGE 58536)
  • Military Specifications (CAGE 81349)
Schedule B & Trade:
  • Schedule B: 2710193080 (NAICS 324110)

    Lubricating oils with or without additives, nesoi

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    W - Rating variable

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    No qup
  • Unit of Measure
    Cn
  • Shelf Life
    36 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $602.07 to $1,003.46..
Does NSN 9150-00-145-0112 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, Department Of The Navy, National Aeronautics and Space Administration, Poland, Spain, Republic Of Korea, and Turkey
What is the NIIN of NSN 9150-00-145-0112?
001450112 or 00-145-0112
Does NSN 9150-00-145-0112 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-145-0112?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Oct 24, 1969
MSDS

Material Safety

MSDS BDCCV MIL-L-46017(MR) CODE 60037-300 LUB OIL

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: see signs & symptoms of overexposure.

explanation of carcinogenicity: manufacturer states no carcinogenic or
mutagenic ingredients.

effects of overexposure: eyes/skin: mild eye & skin irritation;no
sensitization & no corrosive effects.

medical cond aggravated by exposure: none noted.

First Aid

First aid: eyes: flush with water for 15 minutes.Get medical
attention;skin: flush with water.Remove & launder contaminated
clothing;inhalation: n/r;ingestion: do not induce vomit.Get medical
attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 700f(371c)
spec gravity: 0.89
solubility in water: negligible
appearance and odor: fluid. Tacky oil. Fatty odor.

percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: heat,sparks,open flames
hazardous decomposition products: co,co*2

Proper Disposal

Waste disposal methods: incinerate. Comply with all applicable
federal,state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil (distillates,solvent-dewaxed heavy paraffinic)
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 50%
osha pel: 5mg/m*3(mist)
acgih tlv: 5mg/m*3(mist)

ingred name: mineral oil
cas: 72623-83-7
fraction by wt: 44%
osha pel: 5mg/m*3(mist)
acgih tlv: 5mg/m*3(mist)

ingred name: polyisobutylene
cas: 9003-27-4
rtecs #: ud1010000
fraction by wt: 2%

ingred name: sulforized isobutylene
cas: 68511-50-2
fraction by wt: 1%

ingred name: lard-methyl ester
cas: 68082-78-0
fraction by wt: 3%

MSDS BDCCW WAY OIL

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is a mild irritant and does
not sensitize. Vapor pressure is low enough to be non-hazardous by
inhalation. Toxicity is low by ingestion.

explanation of carcinogenicity: mfr claims no carcinogenity
effects of overexposure: eye/skin: irritation. Inhaled: none reported.

ingestion: none reported.

medical cond aggravated by exposure: none

First Aid

First aid: eye: flush with water 15 min. Skin: wash with soap & water.

remove contaminated clothing & launder before reuse. Inhaled: none
reported. Ingested: do not induce vomiting. Get medical attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 700f/371c
spec gravity: 0.89
solubility in water: nil
appearance and odor: fatty,fluid,oil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: none reported
hazardous decomposition products: normal products of combustion.

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state,local regulations.

mfr suggests incinerate.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 50%
other rec limits: 5 mg/m3

ingred name: mineral oil
cas: 72623-83-7
fraction by wt: 44%

ingred name: polyisobutylene
cas: 9003-27-4
rtecs #: ud1010000
fraction by wt: 2.0%

ingred name: sulfurized isobutylene
cas: 68511-50-2
fraction by wt: 1.0%

ingred name: lead methyl ester
cas: 68082-78-0
fraction by wt: 3.0%

MSDS BDCCX LUB OIL, MACHINE TOOL SLIDEWAYS

Hazards

Effects of overexposure: eye & skin irrit

First Aid

First aid: eye: immed flush w/plenty of water for 15 minutes. Get med
attn. Skin: wash w/soap & water.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 560f,293c
vapor pres: nil
vapor density: >75
spec gravity: 0.90
evaporation rate & reference: dark oily liquid,
solubility in water: negligible
appearance and odor: petroleum odor
percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: extreme heat or open flame.

hazardous decomposition products: toxic fumes & smoke, co, sulfur oxdes

Proper Disposal

Waste disposal methods: dispose by incineration i/a/w all applicable
local, state, and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum hydrocarbon
acgih tlv: 5 mg/cum (mist)

MSDS BGSPH SHELL TONNA T OIL 68;SHELL CODE:66535

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: acute: irritation of eyes,skin and
respiratory tract in form of oil mist;possible headache,nausea,cns
effects. chronic: skin disorders,defatting and dermatitis.

explanation of carcinogenicity: no data available.

effects of overexposure: see health hazards data.

medical cond aggravated by exposure: pre-existing conditions may be
worsen.

First Aid

First aid: skin and eyes: flush with plenty of water for about 15
minutes.Seek medical help if needed. Inhalation: remove to fresh
air.Seek medical attention. Ingestion: do not induce vomiting.Call a
physician imme diately.

Chemical Properties

Hcc: v6
melt/freeze pt: m.P/f.P text: -15f
spec gravity: 0.9030
solubility in water: negligible
appearance and odor: amber oil hydrocarbon odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: heat,open flames
hazardous decomposition products: co and other unidentified organic
compounds

Proper Disposal

Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: sol.Ref.Hydrotreated heavy naphthenic distillate
cas: 64742-52-5
rtecs #: py8035000
fraction by wt: 0-70%
other rec limits: 5mg/cum,as oil mist

ingred name: severely hydrotreated heavy naphthenic distillate
cas: 64742-52-5
rtecs #: py8035000
fraction by wt: 0-90%
other rec limits: 5mg/cum,as oil mist

ingred name: sol.Ref.Hydrotreated middle distillate
cas: 64742-46-7
rtecs #: jn9379645
fraction by wt: 0-30%
other rec limits: 5mg/cum as oil mist

ingred name: sol.Ref.Hydrotreated residual oil
cas: 64742-57-0
fraction by wt: 0-5%
other rec limits: 5mg/cum,oil mist

ingred name: minor additives
fraction by wt:

MSDS BGXFZ SHELL TONNA T OIL 68

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is minimully irritating and
nearly non-toxic. Inhalation of oil mist (highly unlikely) or
vapors (heated above normal operating temperatures) may cause
pulmonary effects.

effects of overexposure: eye,skin: mild irritation,defatting with
prolonged/repeated contact. Inhaled: mild irritation,pulmonary
effects.

medical cond aggravated by exposure: none

First Aid

First aid: eye: flush with water 15 min. Skin: remove contaminated
clothing. Wash area with soap and water. Launder clothing before
reuse. Inhaled: remove from exposure. Give artificial respiration or
oxygen if nee ded. Ingested: do not induce vomitimg. Give water or
milk. (nothing by mouth if unconscious) get immediate medical care.

if symptoms persist or are severe,get medical care.

Chemical Properties

Hcc: v6
melt/freeze pt: m.P/f.P text: -15f/-26c
spec gravity: 0.903
solubility in water: negligible
appearance and odor: amber oil (liquid),hydrocarbon odor.

Reactivity

Stability indicator/materials to avoid: yes
oxidizers.

stability condition to avoid: heat,open flame.

hazardous decomposition products: complex products of hydrocarbon
combustion including carbon monoxide.

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state,local regulations.

keep out of water ways.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: solvent refined hydrotreated naphthenic distillate
cas: 64742-52-5
rtecs #: py8035000
fraction by wt: 0-90%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3,stel 10

ingred name: solvent refined hydrotreated middle distillate
cas: 64742-46-7
fraction by wt: 9-30%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3,stel 10

ingred name: solvent refined hydrotreated residual oil
cas: 64742-57-0
fraction by wt: 0-5%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3,stel 10

ingred name: additives
fraction by wt:

MSDS BJYRR MIL-L-46017;CODE: 60037

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: low health hazards per msds. May cause
irritation of eyes, skin.

explanation of carcinogenicity: data per msds
effects of overexposure: see health hazards data.

medical cond aggravated by exposure: none expected.

First Aid

First aid: inhalation: remove to fresh air. Resuscitate if not breathing.

get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.

skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 700f,371c
spec gravity: 0.89
solubility in water: nil
appearance and odor: fluid tacky oil-fatty
percent volatiles by volume: 0.0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide and
other unidentified components.

Proper Disposal

Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 50.0%
other rec limits: none specified

ingred name: mineral oil
cas: 72623-83-7
fraction by wt: 44.0%
other rec limits: none specified

ingred name: polyisobutylene
cas: 9003-27-4
rtecs #: ud1010000
fraction by wt: 2.0%
other rec limits: none specified

ingred name: sulfurized isobutylene
cas: 68511-50-2
fraction by wt: 1.0%
other rec limits: none specified

ingred name: lead methyl ester
cas: 68082-78-0
fraction by wt: 3.0%
other rec limits: none specified

MSDS BPQQW SLIDE OIL

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is minimully irritating and
nearly non-toxic. Inhalation of oil mist (highly unlikely) or
vapors (heated above normal operating temperatures) may cause
pulmonary effects.

effects of overexposure: eye,skin: mild irritation,defatting with
prolonged/repeated contact. Inhaled: mild irritation,pulmonary
effects.

medical cond aggravated by exposure: none

First Aid

First aid: eye: flush with water 15 min. Skin: remove contaminated
clothing. Wash area with soap and water. Launder clothing before
reuse. Inhaled: remove from exposure. Give artificial respiration or
oxygen if nee ded. Ingested: do not induce vomitimg. Give water or
milk. (nothing by mouth if unconscious) get immediate medical care.

if symptoms persist or are severe,get medical care.

Chemical Properties

Hcc: v6
nrc/state lic num: none
melt/freeze pt: m.P/f.P text: -15f/-26c
spec gravity: 0.903
solubility in water: negligible
appearance and odor: amber oil (liquid),hydrocarbon odor.

Reactivity

Stability indicator/materials to avoid: yes
oxidizers.

stability condition to avoid: heat,open flame.

hazardous decomposition products: complex products of hydrocarbon
combustion including carbon monoxide.

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state,local regulations.

keep out of water ways.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: solvent refined hydrotreated naphthenic distillate
cas: 64742-52-5
rtecs #: py8035000
fraction by wt: 0-90%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3,stel 10

ingred name: solvent refined hydrotreated middle distillate
cas: 64742-46-7
fraction by wt: 9-30%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3,stel 10

ingred name: solvent refined hydrotreated residual oil
cas: 64742-57-0
fraction by wt: 0-5%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3,stel 10

ingred name: additives
fraction by wt:

MSDS BSDQR MIL-L-40617 GRI, MACHINE TOOL SLIDEWAYS

Hazards

Ld50 lc50 mixture: not specified by manufacturer.

routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged or repeated skin contact may
cause dermatitis, skin irritation. Not acute effects reported.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

effects of overexposure: skin irritation, cracking, drying
medical cond aggravated by exposure: preexisting skin conditions may be
aggravated by exposure.

First Aid

First aid: inhalation: remove from exposure. Restore breathing. Keep
warm and quiet. Get medical attention. Skin: wash affected area
thoroughly with soap and water. If irritation persists, get medical
attention. Eyes: flush with large amounts of water for 15 minutes.

get medical attention. Ingestion: contact a physician immediately.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >626f,>330c
melt/freeze pt: m.P/f.P text:
vapor pres: 0
vapor density: nil
spec gravity: not given
evaporation rate & reference: 0
solubility in water: negligible
appearance and odor: dark green brown viscous liquid, bland odor
percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers such as hydrogen peroxide, bromine, chromic acid
stability condition to avoid: extreme temperatures
hazardous decomposition products: carbon monoxide, carbon dioxide

Proper Disposal

Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum hydrocarbons
other rec limits: none recommended

ingred name: additives
other rec limits: none recommended

MSDS BVGHC WAY LUBRICANT 68,00561

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is >5000 mg/kg.

routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- low oral and dermal toxicity. May cause eye
irritation. Mists or fumes from excessive heating may cause
irritation. Prolonged/repeated skin co ntact may cause irritation.

ingestion of more than several mouthfuls may cause abdominal
discomfort. Chronic- none.

explanation of carcinogenicity: none
effects of overexposure: eyes, skin, respiratory and gastrointestinal
tracts irritation, nausea, vomiting, abdominal discomfort,
diarrhea, defatting of skin, headache, drowsiness
medical cond aggravated by exposure: persons with pre-existing skin
disorders (dermatitis) may be more susceptible to the effects of
this product.

First Aid

First aid: call a doctor if symptoms persist. Eye: immediately flush with
water for 15 minutes, holding eyelids open. Skin: remove
contaminated clothing. Wash skin with soap & water. Inhaled: remove
to fresh air. P rovide cpr/oxygen if needed. Oral: if conscious and
more than several mouthfuls have been swallowed, drink two glasses
of water (16 oz). Call a physician.

Chemical Properties

Hcc: t6
nrc/state lic num: not relevant
boiling pt: b.P. Text: unknown.

vapor pres: unknown.

spec gravity: 0.8789
viscosity: 64.5 cst@104f
evaporation rate & reference: unknown.

solubility in water: unknown.

appearance and odor: stringy dark red
percent volatiles by volume: 100

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat, open flame
hazardous decomposition products: may form carbon monoxide, carbon
dioxide, irritating aldehydes and ketones and combustion products
of sulfur.

Proper Disposal

Waste disposal methods: dispose of waste in compliance with all
applicable local, state and federal laws and regulations. Rcra
emergency number: 800-424-9346. Do not contaminate any lakes,
streams, ponds or underground water supply.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil, petroleum distillate, solvent dewaxed (mild),
heavy paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 80 - 95%
other rec limits: none recommended
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist

ingred name: sulfur-containing fat
cas: 68990-64-7
fraction by wt: 1 - 4%
other rec limits: none recommended

ingred name: volatile organic content: 100
rtecs #: 9999999vo
other rec limits: not relevant
osha pel: not relevant
acgih tlv: not relevant

MSDS CGMFC 00561 WAY LUBRICANTS 68

Hazards

Ld50 lc50 mixture: oral ld50 (rats): > 5.00 g/kg
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact may cause minimal
irritation. Brief skin contact is not irritating. Prolonged contact
may cause defatting or irritation. Inhalation of vapors or mist may
cause irritation of nose & throat, headache, nausea, drowsiness.

if more than several mouthfuls are swallowed may cause
gastrointestinal irritation.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

effects of overexposure: eye irritation, skin
irritation/redness/discomfort, nose/throat irritation, headache,
nausea, drowsiness, abdominal discomfort, nausea, diarrhea.

medical cond aggravated by exposure: prolonged or repeated skin contact
may aggravate an existing dermatitis.

First Aid

First aid: eyes: flush with water for several minutes. Get medical
attention if irritation persists. Skin: wash with soap and water
for several minutes. Get medical attention if irritation persists.

ingestion: i f more than several mouthfuls are swallowed, give 2
glasses of water. Get medical attention. Inhalation: if irritation,
headache, nausea occurs, remove to fresh air. Get medial attention
if persists.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: not given
vapor density: not given
spec gravity: 0.8789
viscosity: not given
evaporation rate & reference: not given
solubility in water: not given
appearance and odor: dark red liquid, petroleum oil odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: under extreme temperature or extended
storage periods, hydrogen sulfide gas may accumulate in head-space
of container.

hazardous decomposition products: hydrogen sulfide, carbon monoxide,
carbon dioxide, aldehydes, ketones, compounds of sulfur.

Proper Disposal

Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil, petroleum distillate, solvent dewaxed (mild),
heavy paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 80-94.9%
other rec limits: none recommended

ingred name: olefin ester sulfide
fraction by wt: 3-9.99%
other rec limits: none recommended

ingred name: mineral oil, solvent revfined heavy paraffinic, severely
hydrotreated (non-carcinogenic - iarc)
cas: 64741-88-4
rtecs #: py8040501
fraction by wt: 1-2.99%
other rec limits: none recommended