Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Aircraft And Instrument Grease

NSN: 9150-00-145-0161 | Model: A-A-59173-I-A

A synthetic or mineral oil base grease designed for lubrication of antifriction bearings, lightly loaded gears, and on sliding and rolling surfaces of such equipment as instruments, cameras, electronic equipment and aircraft control systems. It is not specially prepared for salt spray resistance but can be used for a wide temperature range. Excludes grease (1), aircraft; and grease (1), instrument.

NSN Properties and Flags
NATO Stock Number
9150-00-145-0161
DEMIL
NO
End Application
Aircraft
Basic Ingredient
Polymethylthenyl silicone fluid-lithium soap
Service Characteristics
Low evaporation and oxidation resistant
Quantity Within Each Unit Package
8.000 ounces, avoirdupois
Minimum Dropping Point
374.0 degrees fahrenheit
Nondefinitive Specification/std Data
I type

Inventory Check

The last inventory check on this NSN was done on 08/30/2022. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 25

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-145-0161 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • A-A-59173-I-A
  • A-A-59173
  • MOLYKOTE 33 LIGHT
  • MIS13014TYI-8OZ
  • MIL-G-46886
  • DC 33 LIGHT
  • 9150PL0687135
Cage Codes:
  • Federal Commercial Item Description (CAGE 58536)
  • Dow Corning Corporation (CAGE 71984)
  • U S Army Aviation and Missile (CAGE 18876)
  • Military Specifications (CAGE 81349)
  • Inspektorat Wsparcia Sil Zbrojnych (CAGE 9009H)
Schedule B & Trade:
  • Schedule B: 2710193750 (NAICS 324110)

    Lubricating greases with or w/out additives

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

ADPE

- Represents items with no adp components

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    090960 - Lubricating grease noi

  • WCC:

    604 - Petroleum, lubricating grease (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    R - 65.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    48
  • Unit of Measure
    Tu
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $167.75 to $279.59..
Does NSN 9150-00-145-0161 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Bureau Of Prisons, U.s. Coast Guard, National Aeronautics and Space Administration, National Aeronautics and Space Administration, Poland, Brazil, Spain, Singapore, Australia, Canada, New Zealand, France, Germany, Republic Of Korea, United Kingdom, Netherlands, Portugal, Italy, Greece, Turkey, and Nato Maintenance and Supply Agency
What is the NIIN of NSN 9150-00-145-0161?
001450161 or 00-145-0161
Does NSN 9150-00-145-0161 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-145-0161?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Oct 02, 1970
MSDS

Material Safety

MSDS BDCDB 33 EXTREME LOW TEMPERATURE BEARING GREASE, LIGHT

Hazards

Ld50 lc50 mixture: not given for product as a whole
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: direct eye contact may cause temporary
discomfort with mild redness and dryness similar to windburn.

several repeated prolonged exposures may irritate the skin.

inhalation may irritate respiratory pas sages and eyes very
slightly. Swallowing large amounts may cause digestive discomfort.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

effects of overexposure: eye irritation, skin irritation, dermatitis,
upper respiratory tract irritation, nausea, vomiting, diarrhea.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing.

wash with soap and water. If irritation persists, get medical
attention. In halation: no first aid should be needed. Ingestion:
no first aid should be needed.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: < 5
vapor density: not given
spec gravity: 1.05
evaporation rate & reference: not given
solubility in water: negligible
appearance and odor: light beige-tan grease, very little odor
percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: lithium oxide, silicon dioxide, carbon
dioxide and traces of incompletely burned carbon products.

Proper Disposal

Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
fraction by wt:
other rec limits: twa 20 microgms/m3

ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
fraction by wt:
other rec limits: twa 200 microgms/m3

ingred name: lithium soap thickener
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: 18%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust

ingred name: non hazardous ingredients
fraction by wt: balance
other rec limits: none recommended

MSDS BJNJC NORSIL SG 841

Hazards

Ld50 lc50 mixture: not provided by manufacturer
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye and skin irritation.

chronic: dermatitis.

explanation of carcinogenicity: product contains no materials currently
classified as carcinogenic by ntp, iarc or osha.

effects of overexposure: eyes/skin: irritation. Inhalation: abdominal
pain, diarrhea.

medical cond aggravated by exposure: pre-existing skin conditions may be
aggravated by exposure.

First Aid

First aid: eyes: flush with large amounts of water for at least 15
minutes.See doctor. Skin: remove contaminated clothing and
shoes.Flush with plenty of water.If irritation persists,see doctor.

ingestion: do not induce vomiting.If vomiting occurs,give
water.See doctor.Nothing by mouth if unconscious.

Chemical Properties

Hcc: v6
spec gravity: 1.05
solubility in water: negligible
appearance and odor: white, opaque paste, essentially odorless.

percent volatiles by volume: < 3%

Reactivity

Stability indicator/materials to avoid: yes
none specified by manufacturer.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: exposure to temperatures above 575f
will release sio2 and co2.

Proper Disposal

Waste disposal methods: material that cannot be used should be disposed
of in accordance with all applicable local, state and federal
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: filled methylphenyl polysiloxane grease
fraction by wt: 100%
other rec limits: none specified

MSDS BJPRB INNERBOND X-333 GREASE

Hazards

Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: direct contact may cause
temporary discomfort. Skin: short term exposure will cause no known
adverse effects. Repeated prolonged exposures may irritate. Inhale:
irritates respiratory passages & e yes very slightly. Ingest:
swallowing small amounts should not injure. Large amounts may cause
digestive discomfort.

explanation of carcinogenicity: none of the chemical in this product is
listed by iarc, ntp or osha as a carcinogen.

effects of overexposure: eye: mild redness and dryness similar to
windburn.

First Aid

First aid: eyes: immediately flush with water. Skin: wipe off excess
with mild soap and water solution or "waterless" cleaner.

inhale/ingest: no first aid should be needed.

Chemical Properties

Hcc: v6
vapor pres:
spec gravity: 1.05
solubility in water:
appearance and odor: very little odor, grease
percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
oxidizing materials can cause a reaction.

hazardous decomposition products: lithium oxide, silicone dioxide,
carbon dioxide, and traces of incompletely burned carbon products.

Proper Disposal

Waste disposal methods: dispose of in accordance with local, state and
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
fraction by wt:
other rec limits: none established

ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
fraction by wt:
other rec limits: none established

ingred name: lithium stearate
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: 18%
other rec limits: none specified

MSDS BQSWD NORSIL SG 133L, SILICONE GREASE

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may cause slight irritation.

skin: may cause slight irritation. Dermatitis may result from
prolonged or repeated skin contact. Inhalation: not a likely source
of exposure. Ingestion: may produce abdominal pain and diarrhea.

explanation of carcinogenicity: no data.

effects of overexposure: eyes: irritation. Skin: irritation, dermatitis.

inhalation: not a likely source of exposure. Ingestion: abdominal
pain, diarrhea.

medical cond aggravated by exposure: person with a pre-existing disease
involving the skin may be at increased risk from exposure to this
product.

First Aid

First aid: eyes: flush with large amounts of water. If irritation
persists, get medical attention. Skin: remove contaminated
clothing. Flush area with plenty of water. If irritation persists,
get medical attenti on. Inhalation: not a likely source of
exposure. Ingestion: do not induce vomiting. If vomiting occurs,
give fluids. Get medical attention.

Chemical Properties

Hcc: v6
spec gravity: 1.05
solubility in water: negligible
appearance and odor: white, opaque paste. Essentially odorless.

percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
none known.

stability condition to avoid: unknown.

hazardous decomposition products: exposure to temperatures above 575f
will release silicon dioxide and carbon dioxide.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: dispose of waste material and empty containers
in accordance with local, state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: filled methylphenyl polysiloxane grease, (inert,
non-hazardous ingredients)
fraction by wt: 100%
other rec limits: none recommended

MSDS BWZKY 33 EXTREME LOW TEMPERATURE BEARING GREASE, LIGHT

Hazards

Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: direct eye contact may cause temporary
discomfort with mild redness and dryness similar to windburn. A
single relatively short exposure cause no known adverse skin
effect. Several prolonged repeaated exposures may irritate skin.

inhalationirritates respiratory passages. Swallowing large amounts
may cause discomfort.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

effects of overexposure: none specified by manufacturer.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: immediately flush with water. Skin: wipe off and wash
with mild soap and water solution or "waterless" cleaner.

inhalation: no first aid should be needed. Ingestion: no first aid
should be neede d.

Chemical Properties

Hcc: v6
vapor pres: < 5
spec gravity: 1.05
solubility in water: negligible
appearance and odor: very little odor, grease, light beige-tan.

percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: lithium oxide, silicon dioxide, carbon
dioxide and traces of incompletely burned carbon products.

Proper Disposal

Waste disposal methods: dow corning suggests that all local, state and
federal regulations concerning health and pollution be reviewed to
determine approved disposal procedures. Contact dow corning if
there are any disposal questions.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
fraction by wt:
other rec limits: twa 20 microgms/m3

ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
fraction by wt:
other rec limits: twa 200 microgms/m3

ingred name: lithium soap thickener
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: 18%
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust

MSDS CCJQL DOW CORNING 33 EXTREME LOW TEMP,BEARING GREASE,LIGHT

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: direct contact may cause temp
discomft w/mild redness,dryness similar to windburn.Skin: single
short expo causes no known adverse effect.Severe rep/prol
expo(24-48hr)may irrit.Inhal: no irrit to eye /resp passages.No
injury likely from relatively short expo
tranferred to mouth by fingers (supplemen)
explanation of carcinogenicity: per msds: carcinogens: none known.

effects of overexposure: temp eye discomfort, mild redness, dryness
similar to windburn. Skin irrit. Injure slightl if ingest lg amts.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eye: immed flush w/water. Skin/inhal: no first aid should be
needed. oral: get med attn. Comments: treat accordint ot person's
condition & specifics of exposure.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: n/determin
decomp temp: decomp text: np
vapor pres: na
vapor density: na
spec gravity: 1.10
ph: na
viscosity: n/avai
evaporation rate & reference: np
solubility in water: none.

appearance and odor: grease pink color, slight odor.

percent volatiles by volume: na
corrosion rate: np

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: none.

hazardous decomposition products: silicon dioxide, metal oxides, carbon
oxides, traces of imcompletely burned carbon cmpds, formaldehyde.

Proper Disposal

Waste disposal methods: call dow corning enviro mgmt 517-496-6315 if
more info desired.Matl as is not haz waste.State/loc laws may
impose addn regulatroy reqmts regarding dispo.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lithium stearate
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: 21%
other rec limits: none recommended

ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
fraction by wt:
other rec limits: none recommended

ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
fraction by wt:
other rec limits: none recommended

ingred name: phenylmethylsiloxane
cas: 63148-52-7
fraction by wt: 79%
other rec limits: none recommended

MSDS CJJRW 33 EXTREME LOW TEMPERATURE BEARING GREASE, LIGHT

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye (hmis). Acute
effects - eye: direct eye contact may cause temporary redness and
discomfort. Skin: no significant irritation expected from a single
short exposure. Inhalation: no sig nificant effects expected from a
single short exposure. Oral: low ingestion hazard in normal use.

prolonged or repeated exposure effects - skin: repeated or
prolonged exposure may cause irritation. In halation: no known
applicable information. Oral: repeated ingestion or swallowing
large amounts may injure internally.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

First Aid

First aid: eye: immediately flush with water. Skin: no first aid should
be needed. Inhalation: no first aid should be needed. Oral: get
medical attention. Comments: treat according to person's conditions
of expo sure.

Chemical Properties

Hcc: v6
melt/freeze pt: m.P/f.P text: n/d
spec gravity: 1.10@25c
evaporation rate & reference: not given
solubility in water: none
appearance and odor: grease,pink,slight odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: none

Proper Disposal

Waste disposal methods: disposal of collected product, residues, and
cleanup materials may be environmentally regulated. Observe all
applicable local, state and federal waste management regulations.

call dow corning environm ental management, (517) 496-6315, if
additional information is desired.

Ingredients List

Ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
fraction by wt: trace
other rec limits: twa 20 microgms/m3

ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
fraction by wt: trace
other rec limits: twa 200 microgms/m3

ingred name: lithium stearates
cas: 4485-12-5
rtecs #: wi4370000
minumum % wt: 15.

maxumum % wt: 40.

osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust

ingred name: dimethyl, phenylmethyl siloxane, trimethyl-terminated
cas: 63148-52-7
code: f
> wt: 60.

other rec limits: none recommended

MSDS CJKGM 33 EXTREME LOW TEMPERATURE BEARING GREASE, LIGHT

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye (hmis). Acute
effects - eye: direct eye contact may cause temporary redness and
discomfort. Skin: no significant irritation expected from a single
short exposure. Inhalation: no sig nificant effects expected from a
single short exposure. Oral: low ingestion hazard in normal use.

prolonged or repeated exposure effects - skin: repeated or
prolonged exposure may cause irritation. In halation: no known
applicable information. Oral: repeated ingestion or swallowing
large amounts may injure internally.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

First Aid

First aid: eye: immediately flush with water. Skin: no first aid should
be needed. Inhalation: no first aid should be needed. Oral: get
medical attention. Comments: treat according to person's conditions
and spe cifics of exposure.

Chemical Properties

Hcc: v6
melt/freeze pt: m.P/f.P text: n/d
spec gravity: 1.10@25c
evaporation rate & reference: not given
solubility in water: none
appearance and odor: grease,pink,slight odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: none

Proper Disposal

Waste disposal methods: disposal of collected product, residues, and
cleanup materials may be environmentally regulated. Observe all
applicable local, state and federal waste management regulations.

call dow corning environm ental management, (517) 496-6315, if
additional information is desired.

Ingredients List

Ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
< wt: .1
other rec limits: twa 20 microgms/m3

ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
< wt: .1
other rec limits: twa 200 microgms/m3

ingred name: lithium stearates
cas: 4485-12-5
rtecs #: wi4370000
= wt: 21.

osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust

ingred name: dimethyl, phenylmethyl siloxane, trimethyl-terminated
cas: 63148-52-7
code: f
= wt: 79.

other rec limits: none recommended

MSDS CJRGS 33 EXTREME LOW TEMPERATURE BEARING GREASE, LIGHT

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye (hmis). Acute
effects - eye: direct eye contact may cause temporary redness and
discomfort. Skin: no significant irritation expected from a single
short exposure. Inhalation: no sig nificant effects expected from a
single short exposure. Oral: low ingestion hazard in normal use.

prolonged or repeated exposure effects - skin: repeated or
prolonged exposure may cause irritation. In halation: no known
applicable information. Oral: repeated ingestion or swallowing
large amounts may injure internally.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

First Aid

First aid: eye: immediately flush with water. Skin: no first aid should
be needed. Inhalation: no first aid should be needed. Oral: get
medical attention. Comments: treat according to person's conditions
of expo sure.

Chemical Properties

Hcc: v6
melt/freeze pt: m.P/f.P text: n/d
spec gravity: 1.10@25c
evaporation rate & reference: not given
solubility in water: none
appearance and odor: grease,pink,slight odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.

stability condition to avoid: none

Proper Disposal

Waste disposal methods: disposal of collected product, residues, and
cleanup materials may be environmentally regulated. Observe all
applicable local, state and federal waste management regulations.

call dow corning environm ental management, (517) 496-6315, if
additional information is desired.

Ingredients List

Ingred name: lithium stearate
cas: 4485-12-5
rtecs #: wi4370000
minumum % wt: 15.

maxumum % wt: 40.


ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
fraction by wt: trace

ingred name: cyclotetrasiloxane, heptamethylphenyl-
cas: 10448-09-6
rtecs #: gz4392000
fraction by wt: trace