Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of aircraft components such as actuators, engine accessories, control bearings, landing gears, and wheel bearings. It does not include grease, aircraft and instrument and grease, instrument.
The last inventory check on this NSN was done on 01/19/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $147.66 to $246.11.. | |
Does NSN 9150-00-145-0268 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, National Aeronautics and Space Administration, National Aeronautics and Space Administration, Latvia, Austria, Poland, Slovakia, Bulgaria, Brazil, Spain, Columbia, Singapore, Malaysia, Thailand, Australia, Canada, New Zealand, France, Germany, Republic Of Korea, United Kingdom, Philippines, Netherlands, Portugal, Italy, Greece, Turkey, and Nato Maintenance and Supply Agency | |
What is the NIIN of NSN 9150-00-145-0268? | |
001450268 or 00-145-0268 | |
Does NSN 9150-00-145-0268 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-145-0268? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jul 30, 1969 |
Routes of entry: inhalation: unknown skin: yes ingestion: yes
health hazards acute and chronic: eye irritation, skin
irritation/dermatitis, respiratory tract irritation,
gastrointestinal disturbances.
effects of overexposure: eyes: irritation. Skin: dermatitis, oil acne.
inhalation: irritation of respiratory tract. Ingestion: g.I.
disturbances, diarrhea.
medical cond aggravated by exposure: none known.
First aid: inhalation: remove to fresh air, give cpr/o2 if needed.
eyes/skin: flush with large amounts of water for 15 minutes.
ingestion: rinse mouth. Do not induce vomiting. get medical
attention for eyes, br eathing difficulty, or other symptoms of
overexposure.
Hcc: v6
solubility in water: negligible
appearance and odor: amber buttery clay thickened grease with a sl.Odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: heat,open flames
hazardous decomposition products: co and unidentified org-compds may be
formed upon combustion
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic hydrocarbon
fraction by wt: >73%
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: other components (unidentified)
fraction by wt:
acgih tlv: not specified
Ld50 lc50 mixture: ld50 oral rat=5g/kg
routes of entry: inhalation: no skin: no ingestion: no
health hazards acute and chronic: see signs and symptoms of
overexposure.
effects of overexposure: not expected to be a problem.
eyes/skin: expected to be non-irritating. Inhalation: not applicable.
oral/dermal: slightly toxic.
medical cond aggravated by exposure: none noted.
First aid: eyes: flush with water. Skin: wash with soap & water.
inhalation: not expected to be a problem. Ingestion: not expected to
be a problem. However,if more than 1 pint is ingested,give 1 or 2
glasses of wate r & see doctor. Do not induce vomit. Nothing by
mouth if unconscious.
Hcc: v6
boiling pt: b.P. Text: 600f(316c)
vapor pres: 0.1
spec gravity: 0.887
solubility in water: negligible
appearance and odor: red grease,mild odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: heat,sparks,open flames
hazardous decomposition products: co gas
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic oils ;take tlv as oil mist
fraction by wt: 70%
osha pel: 5mg/m*3 (oil mist)
acgih tlv: 5mg/m*3 (oil mist)
ingred name: additives and/or other ingreds
fraction by wt: 30%
ingred name: acetone (sara iii)
cas: 67-64-1
rtecs #: al3150000
fraction by wt: 2%
osha pel: 1000ppm
acgih tlv: 750ppm/1000stel;9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of eyes and skin;cns
effects like headache,nausea,dizziness,vomitting: chronic: drying of
skin or dermatitis;no ill effects due to inhalation or ingestion
were identified.
explanation of carcinogenicity: data per msds
effects of overexposure: eyes: mild irritg;skin: reptd contct may cause
skin disorder or local necrosis;inhal/ingest: not known
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.
skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
solubility in water: negligible
appearance and odor: smooth amber grease. Slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: no*x,co & other unident oxygenates can
form during combust
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins
cas: 68037-01-4
fraction by wt: 86.0%
ingred name: bentonite (as nuisance dust or particulates not otherwise
regulated)
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: 6.0%
osha pel: 15 mg/m3 total dust
acgih tlv: 10 mg/m3 tdust;8990
ingred name: fatty acid amides
cas: 64754-98-9
fraction by wt: 4.0%
ingred name: other components (type not specified)
fraction by wt: 4.0%
ingred name: other components may be of those used/left over by mfg
process-see suppl data for names.
rtecs #: 9999999zz
Ld50 lc50 mixture: ld50 (oral rat) 85 mg/kg
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: eyes: mildly irritating.Skin: (1)high
pressure injection into skin can cause necrosis.(2)contact may
cause skin disorders.Inhal: vapor may be irritating to the
respiratory tract.Ingest: hmis suggests that item is not a
pneumonitis hazard.Sodium nitrite can change blood chemistry.
explanation of carcinogenicity: sodium chromate,is a cancer suspect.Iarc
and ntp list all chromium compounds as suspect.
effects of overexposure: skin: folliculitis,dermatitis,oil
acne.Injection-necrosis is preceeded by pain and tissue
damage.Ingest(sodium nitrite): cyanosis,shortness of breath
...Coma,death.
medical cond aggravated by exposure: pre-existing skin and eye disorders
may be aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if needed.Get
medical attention. Eye: flush with water for 15 minutes while
holding eyelids open. Get medical attention. Skin: remove
contaminated clothing ;wash with soap and water.Waterless cleaner
can be used.Skin injection required immediate medical attention.
ingestion: do not induce vomiting.Get prompt qualified medical
attention.
Hcc: v6
solubility in water: insoluble
appearance and odor: grease,smooth;brown;slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: heat,open flames.
hazardous decomposition products: carbon monoxide and unidentified
organic compounds(smoke with gases+particulates).
Waste disposal methods: dispose of in accordance with federal,state and
local regulations.Epa classifies this materiel as an oil per
cwa(clean water act).
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins
cas: 68037-01-4
fraction by wt: 70-80%
other rec limits: none specified
ingred name: organophilic clay
cas: 71011-25-1
fraction by wt: 5-10%
other rec limits: none specified
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
other rec limits: none specified
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: sodium chromate (sara iii)
cas: 7775-11-3
rtecs #: gb2955000
fraction by wt:
other rec limits: none specified
osha pel: 0.1 ppm cro3;ceiling
acgih tlv: 0.05 mg cr/m3; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: synthetic ester
fraction by wt: 1-2%
other rec limits: none specified
ingred name: other components (type not specified)
fraction by wt: 4.0%
other rec limits: none specified
Ld50 lc50 mixture: not specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: slightly toxic by ingestion, may cause
skin irritation, eye irritation.
explanation of carcinogenicity: product contains no ingredients
currently classified as carcinogenic by ntp, iarc or osha.
effects of overexposure: nausea, vomiting, skin irritation, eye
irritation
medical cond aggravated by exposure: pre-existing skin conditions may be
aggravated by exposure.
First aid: eyes: flush thoroughly with water. If irritation persists,
call a physician. Skin: wash with soap and water. High pressure
accidental injection through the skin requires immediate medical
attention. I nhalation: not expected to be a problem. Ingestion: do
not induce vomiting. Give 1-2 glasses of water. Contact a
physician.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
melt/freeze pt: m.P/f.P text: not given
vapor pres: < 0.1
vapor density: not given
spec gravity: 0.949
evaporation rate & reference: not given
solubility in water: negligible
appearance and odor: red greas, mild odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: extreme heat
hazardous decomposition products: carbon monoxide
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
recycle where appropria te.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins
cas: 68037-01-4
fraction by wt: >80%
other rec limits: none recommended
ingred name: organophylic clay
cas: 71011-25-1
fraction by wt:
other rec limits: none recommended
ingred name: acetic acid, calcium salt
cas: 62-54-4
rtecs #: af7525000
fraction by wt:
other rec limits: none recommended
ingred name: benzenepropanoic acid, 3,5-bis
cas: 2082-79-3
fraction by wt:
other rec limits: none recommended
ingred name: benzenamine, n-phenyl-
cas: 68411-46-1
fraction by wt:
other rec limits: none recommended
ingred name: phenyl-alpha-naphthylamine
cas: 90-30-2
fraction by wt:
other rec limits: none recommended
ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
fraction by wt: 1.44%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3; 9293
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt: 1.02%
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: mineral oil, petroleum distillates, hydrotreated light
naphthenic
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 0.09%
other rec limits: none recommended
acgih tlv: 5 mg/m3 (oil mist)
ingred name: beta-naphthylamine (sara iii)
cas: 91-59-8
rtecs #: qm2100000
fraction by wt: 0.001%
other rec limits: none recommended
osha pel: see 1910.1009
acgih tlv: a1; 9293
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: alpha-naphthylamine (sara iii)
cas: 134-32-7
rtecs #: qm1400000
fraction by wt: 0.001%
other rec limits: none recommended
osha pel: see 1910.1004
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
Ld50 lc50 mixture: ld50,oral,rat >2000mg/kg (similar prod)
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product formulated w/synthetic
hydrocarbon as base stock.Mobile enviro/health sciences lab tested
representative syn base stocks to assess pot adverse effects on
human health.None of these base stocks appears to pose health haz
to humans under conditons of expected use. Practically non-toxic or
non-irritating.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: no significant effects expected.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eye: flush well w/water.Irrit occurs call dr.Skin: wash w/soap
& water.High pressure accidental injection thru skin requires immed
med attn for possbile incision,irrigation &/or
debridement.Ingest/inhal : not expected to be a problem.However if
>1/2 l(pt) ingested immed give 1-2 glasses of water.Call dr/hosp
emerg rm/poi cntrl cntr for assistance.Do not induce vomit nor give
anything by mouth if uncon
Hcc: v6
boiling pt: b.P. Text: >601f,>316c
vapor pres:
spec gravity: 0.946
viscosity: 5.2cst @100c
solubility in water: negligible
appearance and odor: red grease, mild odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: extreme heat.
hazardous decomposition products: nitrogen oxides. Phosphorus oxides.
carbon monoxide.
Waste disposal methods: suitable for burning in enclsd cntrl burner for
fuel value or supervised incineration.Such burning may be limited
pursuant to rcra.Suitable for processng by approved recycl facil or
dispose @govt appr oved waste dispos facil.Comply w/applicable
(supp)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
fraction by wt: 1%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3; 9394
Ld50 lc50 mixture: oral ld50 (rat) is 85mg/kg ingred #3
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: eyes: may cause minimal
irritation.Skin: may cause skin disorders.High pressure injection
may cause tissue damage.Ingest: may cause gi tract
irritation.Inhal: may cause mild respiratory irritation.
explanation of carcinogenicity: sodium chromate is listed by ntp and
iarc.Dimethylforamide is listed by iarc.
effects of overexposure: injection: necrosis may be evidenced by delayed
onset of pain and tissue damage a few hours following pressure
injection.
medical cond aggravated by exposure: because of its defatting
properties, prolonged and repeated skin contact may aggravate an
existing dermatitis.
First aid: skin: remove contaminated clothing;wash with soap(or waterless
cleaner) and water.Material injected under the skin is a medical
emergency.Eyes: flush with water for 15 minutes.Get medicla
attention.Inha l: remove to fresh air.Give oxygen or artificial
respiration if needed.Ingest: do not induce vomiting.Get prompt
qualified medical attention.
Hcc: v6
vapor pres: negligible
vapor density: >1
solubility in water: insoluble
appearance and odor: grease,smooth;brown;slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: airborne solid and liquid
particulates, carbon monoxide, other unidentified hydrocarbon
products.
Waste disposal methods: contact your local environmental officer.
dispose of in accordance with all federal, state and local
regulations.Evaluate for tclp,consider rcra code d007(chromium).
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 1-decene, homopolymer, hydrogenated
cas: 68037-01-4
fraction by wt: 70-80%
other rec limits: none recommended
ingred name: organophilic clay
cas: 71011-25-1
fraction by wt: 5-10%
other rec limits: none recommended
ingred name: sodium nitrite (cercla)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: sodium chromate (sara 313) (cercla)
cas: 7775-11-3
rtecs #: gb2955000
fraction by wt:
other rec limits: none recommended
osha pel: c 0.1 mg (cro3)/m3
acgih tlv: 0.05 mg(cr)/m3;a1;95
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: dimethylformamide (cercla)
cas: 68-12-2
rtecs #: lq2100000
fraction by wt:
other rec limits: none recommended
osha pel: s, 10 ppm
acgih tlv: s, 10 ppm; 9495
epa rpt qty: 1 lb
dot rpt qty: 1 lb
ingred name: other components
fraction by wt: 10-15%
other rec limits: none recommended
Ld50 lc50 mixture: acute oral ld50 not available
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may be mildly irrit. Skin: prol/rep
contact may cause various skin
disorders(dermatitis,folliculitis,oil acne).Release during hi
pressure usage may result in grease inject into skin-cause loc
necro sis. Inhal/ingest: no specific info identified.
explanation of carcinogenicity: per msds: prod/components not classified
as carcinogens by iarc/ntp/osha.
effects of overexposure: irriation of eye. Skin disorders such as
dermatitis, folliculitis, oil acne. Necrosis from high grease
injection into skin. Local necrosis evidenced by delayed onset of
pain & tissue damage few hrs fo llowing injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eye: flush w/water for 15mins while holding eyelids open.Get
med attn. Skin: remove contamin cloth.Wipe excess off.Wash
w/soap/water/waterless hdclnr then w/soap/water.Irrit persists get
med attn.Matl i nject under skin get med att promptly to prevent
serious dmg.Don't wait for symptoms develp. Inhal: remove to fresh
air.Breath diffi provide oxy.Get med attn. Ingest: do not induce
vomit.In general(sup)
Hcc: v6
boiling pt: b.P. Text: n/av
melt/freeze pt: m.P/f.P text: n/av
decomp temp: decomp text: np
vapor pres: n/av
vapor density: n/av
spec gravity: n/av
ph: np
viscosity: np
evaporation rate & reference: n/av
solubility in water: insoluble.
appearance and odor: amber, smooth, slight odor.
percent volatiles by volume: np
corrosion rate: np
Stability indicator/materials to avoid: yes
avoid contact w/strong oxidizing agents.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: them decomp prod depend highly on
combust conditions.Complex mix airborne solid/liq/part/gas evolve
when matl(supplemen)
Waste disposal methods: based on data available to shell prod not reg by
sara title iii.Releases to air/land/water not reportable under
cercla.Epa cwa product oil.Spills into/lead to surface waters cause
sheen must be reprot ed to nat resp cntnr 800-424-8802.Prod
waste(supp)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalhaolefins
cas: 68037-01-4
fraction by wt: 86.0%
other rec limits: none recommended
ingred name: bentonite; (inorganic clay)
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: 6.0%
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: fatty acid amides
cas: 64754-98-9
fraction by wt: 4.0%
other rec limits: none recommended
ingred name: other components (type not specified)
fraction by wt: 4.0%
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: this product is expected to cause no
more than minor skin & eye irritation.
explanation of carcinogenicity: per msds: ingreds listed as carcinogen in
ntp/iarc/osha: no.
effects of overexposure: expected to cause no more than minor skin & eye
irrit.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: skin: wash w/soap/water.Eye: flush well with water.
Hcc: v6
boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: np
decomp temp: decomp text: np
vapor pres: na
vapor density: na
spec gravity: na
ph: na
viscosity: na
evaporation rate & reference: np
solubility in water: negligible
appearance and odor: dark brownish purple grease, no odor
percent volatiles by volume: na
corrosion rate: np
Stability indicator/materials to avoid: yes
strong oxidizing materials.
stability condition to avoid: avoid heat,flame & contact w/strong
oxidizing agents.
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates & gases will evolve when pyrolysis or
combustion.
Waste disposal methods: place in appropriate disposal facility in
compliance with local regulations.Cercla: none.Rcra haz waste
#/volatile org cmpds: na.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefin
cas: 68037-01-4
fraction by wt: >80%
other rec limits: none recommended
ingred name: organic clay
cas: 68153-30-0
fraction by wt: 1-10%
other rec limits: none recommended
ingred name: sodium nitrite (cercla)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt: 1-5%
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: calcium acetate
cas: 62-54-4
rtecs #: af7525000
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: synthetic esters
cas: 68424-31-7
fraction by wt: 1-5%
other rec limits: none recommended
ingred name: minor additives
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
health hazards acute and chronic: lubricating greases are generally
considered no more than minimally irritating to the eyes. Prolonged
or repeated skin contact may cause various skin disorders such as
folliculitis, oil acne. Release during high pressure usage may
result ininjection of oil into the skin and local
necrosis.Inhalation is not expected to be a relevant route of
exposure. However, under high temperature conditions, vap or
irritating to the nose, throat & respiratory tract may be produced.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: irritation as previously noted. Local necrosis
is evidenced by delayed onset of pain & tissue damage a few hours
following injection.
medical cond aggravated by exposure: preexisting eye & skin disorders
may be aggravated by exposure to this product.
First aid: eyes-flush with water. If irritation occurs, get medical
attention. skin-remove contaminated clothes/shoes & wipe excess
from skin. flush skin with water. Follow by washing with soap &
water. If irritation occurs, get medical attention.
inhaled-remove victim to fresh air & provide oxygen if breathing
dificult. Get mediccal attention. Ingested-do not induce
vomiting! If vomiting occurs spontaneously, keep head below hips
to prevent aspiration of liquid into the lungs. Get medical
attention.
Hcc: v6
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: dark brownish, purple grease, no odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: thermal decomposition products are
highly dependent on the combustion conditions. a complex mixture
of airborne solid. Liquid particulates and gases will evolve when
this material undergoes pyrolysis.
Waste disposal methods: if product becomes a waste, it would not be a
hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local
regulations.
Ingred name: polyalphaolefins
cas: 68037-01-4
code: f
> wt: 80.
ingred name: clay
cas: 68153-30-0
minumum % wt: 1.
maxumum % wt: 10.
ingred name: sodium nitrite
cas: 7632-00-0
rtecs #: ra1225000
minumum % wt: 1.
maxumum % wt: 2.
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: calcium acetate
cas: 62-54-4
rtecs #: af7525000
minumum % wt: 1.
maxumum % wt: 5.
ingred name: synthetic esters
cas: 68424-31-7
code: f
minumum % wt: 1.
maxumum % wt: 5.
ingred name: minor additives
< wt: 5.
Ld50 lc50 mixture: not available.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to the eyes. Skin contact: prolonged or repeated contact may cause
various skin disorders such as dermatitis, folliculitis or oil
acne. Release during high pressu re usage may result in injection
of grease into the skin causing local necrosis. Inhalation: no
specific information identified. Ingestion: no specific information
identified. Chronic exposure has not been tested. Lubricating
greases are generally considered to be of a low order of acute
toxicity to humans and experimental animals.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by international agency for research on
cancer (iarc), national toxicology program (ntp) or occupational
safety and health administrat ion (osha).
effects of overexposure: irritation, local necrosis is evidenced by
delayed onset of pain and tissue damage a few hours following
injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eye contact: flush with water for 15 minutes while holding
eyelids open. Get medical attention. Skin contact: remove
contaminated clothing and wipe excess off. Wash with soap and
water. If irritation persists, get medical attention. If material
is injected under the skin, get medical attention promptly to
prevent serious damage; do not wait for symptoms to develop.
inhalation: remove victim to fre sh air and provide oxygen if
breathing is difficult. Get medical attention. Ingestion: do not
induce vomiting. In general, no treatment is necessary unless large
quantities are ingested. However, get medical advice.
Hcc: v6
nrc/state lic num: not relevant.
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
decomp temp: decomp text: not provided.
vapor pres: not available
spec gravity: not available
ph: not relevant.
viscosity: not relevant.
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: amber, smooth, slight odor.
percent volatiles by volume: not provided
corrosion rate: not provided.
Stability indicator/materials to avoid: yes
contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates and gases will evolve. Carbon monoxide and
other unidentified organic compounds may be formed.
Waste disposal methods: if this product becomes a waste, it would not be
a hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in complicance with local
regulations..
Ingred name: polyalphaolefins
cas: 68037-01-4
= wt: 86.
other rec limits: not provided.
osha pel: not provided.
acgih tlv: not provided.
ingred name: inorganic clay (cas 1302-78-9)
cas: 1302-78-9
rtecs #: ct9450000
= wt: 6.
other rec limits: not provided.
osha pel: not provided.
acgih tlv: not provided.
ingred name: fatty acid amides (cas #: 64754-98-9)
cas: 64754-98-9
= wt: 4.
other rec limits: not provided.
osha pel: not provided.
acgih tlv: not provided.
ingred name: other components
= wt: 4.
other rec limits: not provided.
osha pel: not provided.
acgih tlv: not provided.
Ld50 lc50 mixture: ld50 (oral, rat) > 2,000 mg/kg
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: effects of overexposure: no
significant effects expected. Oral toxicity: practically non-toxic.
dermal toxicity: practically non-toxic. Inhalation toxicity: not
applicable. Harmful concentrations of mists and/or vapors are
unlikely to be encountered through any customary or reasonably
foreseeable handling, use, or misuse of this product. Eye
irritation: practically non-irritating. Skin irritation :
practically non-irritating. Subchronic toxicology: no adverse
effects.
explanation of carcinogenicity: none
effects of overexposure: no significant effects expected.
medical cond aggravated by exposure: not provided
First aid: eye contact: flush thoroughly with water. if irritation
occurs, call a physician. Skin contact: wash contact areas with
soap and water. high pressure accidental injection through the
skin requires i mmediate medical attention for possibleincision,
irrigation and/or debridement. Inhalation: not expected to be a
problem. Ingestion: not expected to be a problem. However, if
greater than 1/2 liter (p int) ingested, immediately give 1 to 2
glasses of water and call a physician, hospital emergency room or
poison control center for assistance. Do not induce vomiting or
give anything by mouth to an un conscious person.
Hcc: v6
boiling pt: >315.6c, 600.F
melt/freeze pt: >232.2c, 450.F
m.P/f.P text: drop point
decomp temp: decomp text: not provided
vapor pres:
vapor density: n/e
spec gravity: 0.946
viscosity: at 40c, cst: 28.0
solubility in water: negligible
appearance and odor: red grease, mild odor.
corrosion rate: not provided
Determined by the toxicity characteristic leaching procedure
(tclp). however, used pr oduct may be regulated.
state regulatory information: the following product ingredients are
cited on the lists below: chemical name
cas number list citations -------------
---------- -----------------------
1,3-propanediol, 2, 115-77-5 1, 10, 20, 21,
23, 2-bis(hydroxymethyl)- 25, 26
1=acgih all 10=osha z 20=il rtk 21=la rtk 23=mn rtk
25=pa rtk 26=ri rtk
Waste disposal methods: product is suitable for burning in an enclosed,
controlled burner for fuel value or disposal by supervised
incineration. Such burning may be limited pursuant to the resource
conservation and recovery act. Product is suitable for processing
by an approved recycling facility or can be disposed of at an
appropriate government waste disposal facility.
Ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
minumum % wt: 1.
maxumum % wt: 5.
other rec limits: not provided
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
Health hazards acute and chronic: eye contact: lubricating greases are
generally considered no more than minimally irritating to the eyes.
skin contact: prolonged or repeated contact may cause various skin
disorders such as dermatitis , folliculitis, oil acne. Release
during high pressure usage may result in injection of oil into the
skin causing local necrosis. Inhalation: not expected to be a
relevant route of exposure. However, under high temperature
conditions, vapors irritating to the nose, throat and respiratory
tract may be produced. Ingestion: no specific information
identified.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: eye contact: irritation. Skin contact:
dermatitis, folliculitis, oil acne. Local necrosis is evidenced by
delayed onset of pain and tissue damage a few hours following
injection. Inhalation: irritatio n of nose, throat, upper
respiratory tract.
medical cond aggravated by exposure: preexisting eye and skin disorders
may be aggravated by exposure to this product.
First aid: eyes contact: flush with water for 15 minutes while holding
eyelids open. Get medical attention. Skin contact: remove
contaminated clothes/shoes. Wipe excess from skin. Wash skin with
soap and water or a waterless hand cleaner followed by soap and
water. Launder clothing and clean shoes before reuse. If irritation
persists, get medical attention. If material injected under skin,
get medical atte ntion. Inhalation: move victim to fresh air and
provide oxygen if breathing is difficult. Get medical attention.
ingestion: do not induce vomiting! If vomiting occurs, keep head
Hcc: v5
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: dark brownish, purple grease, no odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: thermal decomposition products
dependent on conditions. Complex mixture of airborne solid, liquid
particulates, gases evolve during pyrolysis/combustion. Organics
compounds an co may be formed.
conditions to avoid polymerization: will not occur.
Waste disposal methods: if product becomes a waste, it would not be a
hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local regulations.
Ingred name: polyalphaolefins
cas: 68037-01-4
> wt: 80.
ingred name: clay
cas: 68153-30-0
minumum % wt: 1.
maxumum % wt: 10.
ingred name: sodium nitrite
cas: 7632-00-0
rtecs #: ra1225000
minumum % wt: 1.
maxumum % wt: 2.
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: calcium acetate
cas: 62-54-4
rtecs #: af7525000
minumum % wt: 1.
maxumum % wt: 5.
ingred name: synthetic esters
cas: 68424-31-7
minumum % wt: 1.
maxumum % wt: 5.
ingred name: minor additives
< wt: 5.