NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed primarily for the lubrication of ball and roller bearings operating at constant or intermittent high temperatures. It does not include grease, automotive and artillery; grease, aircraft; grease, aircraft and instrument; grease, silicone insulated electric motor; and grease, ordnance bearing and ammunition.
The last inventory check on this NSN was done on 03/22/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $108.09 to $180.16.. | |
| Does NSN 9150-00-149-1592 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Poland, Brazil, Spain, Australia, Canada, Germany, Republic Of Korea, United Kingdom, Portugal, Italy, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 9150-00-149-1592? | |
| 001491592 or 00-149-1592 | |
| Does NSN 9150-00-149-1592 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-149-1592? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Apr 05, 1987 | |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: may be mildly irritating to eyes.
prolonged or repeated contact may cause various skin disorders such
as dermatitis, folliculitis or oil acne. Release during high
pressure usage may result in injectio n of oil into skin causing
local necrosis.
explanation of carcinogenicity: iarc and ntp have determined that there
is sufficent evidence for carcinogenicity of sodium chromate.
effects of overexposure: eye irritation, skin irritation, rash,
drying/cracking of skin. Local necrosis is evidenced by delayed
onset of pain and tissue damage a few hours following injection.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by expousre to this product.
First aid: inhalation: remove from exposure. Restore breathing. Keep
warm and quiet. Get medical attention. Skin: wash affected area
thoroughly with soap and water. If irritation persists, get medical
attention. if material is injected under skin get immediate
medical attention. Eyes: flush with large amounts of water for 15
minutes. Get medical attention. Ingestion: do not induce vomiting.
get medical attn
Hcc: v6
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: not given
vapor density: not given
spec gravity: not given
evaporation rate & reference: not given
solubility in water: insoluble
appearance and odor: amber, smooth grease, pungent odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: heat, open flames
hazardous decomposition products: carbon monoxide and unidentified
organic compounds
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins
cas: 68037-01-4
fraction by wt: 70-80%
other rec limits: none specified
ingred name: organophilic clay
cas: 71011-25-1
fraction by wt: 5-10%
other rec limits: none specified
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
other rec limits: none specified
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: sodium chromate (sara iii)
cas: 7775-11-3
rtecs #: gb2955000
fraction by wt:
other rec limits: none specified
osha pel: 0.1 ppm cro3;ceiling
acgih tlv: 0.05 mg cr/m3; 9192
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: calcium acetate
cas: 62-54-4
rtecs #: af7525000
fraction by wt:
other rec limits: none specified
ingred name: other components (type not specified)
fraction by wt: 4.0%
other rec limits: none specified
Ld50 lc50 mixture: no osha/pel or acgih/tlv has been estb.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: mildly irritating. Skin:
prolonged/repeated contact may cause various disorders such as
dermatitis, folliculitis/oil acne. Inhalation: no specific
information identified. Ingestion: no specific information
identified.
explanation of carcinogenicity: not classified as carcinogens by iarc,
ntp or osha.
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eyes: flush with water for 15 mins. Get medical attention.
skin: remove clothing. Wipe excess off. Wash with soap & water or
waterless hand cleaner. If injected under skin see doctor.
inhalation: remo ve victim to fresh air & give oxygen ifbreathing
is hard. Ingestion: don't induce vomiting. In general no treatment
is necessary unless large quantities are ingested. However, get
medical advice.
Hcc: v6
solubility in water: insoluble
appearance and odor: amber, smooth, slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: heat, open flames.
hazardous decomposition products: carbon monoxide and other unidentified
organic compounds may be formed upon combustion.
Waste disposal methods: dispose of in an appropiate disposal facility in
compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 1-decene, homopolymer, hydrogenated
cas: 68037-01-4
fraction by wt: 86%
other rec limits: none recommended
ingred name: bentonite
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: 6%
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: fatty acid amides
cas: 64754-98-9
fraction by wt: 4%
other rec limits: none recommended
ingred name: other components
fraction by wt: 4%
other rec limits: none recommended
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin (hmis). Acute
- eye contact: product may be mildly irritating to the eyes. Skin
contact: prolonged or repeated contact may cause various disorders
such as dermatitis, follicul itis or oil acne. Release during high
pressureusage may result in injection of grease into the skin
causing local necrosis. Inhalation: no specific information
identified. Ingestion: no specific infor mation identified. Chronic
- this specific product has not been tested in long-term, chronic
exposure tests. Lubricating greases are generally considered to be
of a low order of acute toxicity to hum ans and experimental
animals.
explanation of carcinogenicity: not classified as carcinogens by iarc,
ntp or osha.
effects of overexposure: irritation, local necrosis is evidenced by
delayed onset of pain and tissue damage a few hours following
injection. Skin dermatitis
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhaled: move victim to fresh air. Provide oxygen if
breathing is difficult. Get medical attention. Eyes: flush with
water for 15 minutes while holding eyelids open. Call physician.
skin: remove conta minated clothing and wipe excess off. wash with
soap and water or a waterless hand cleaner, followed by soap and
water. Do not reuse clothing until throughly cleaned. If material
is injected under sk in, get medical attention promptly to prevent
serious damage; do not wait for symptoms to develop. Ingestion: do
not induce vomiting. In general, no treatment is necessary unless
large quantities are ingested. However, get medical advice.
Hcc: v6
solubility in water: insoluble
appearance and odor: amber, smooth grease - slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: avoid heat, open flame
hazardous decomposition products: depends on the combustion conditions.
a complex mixture of airborne solid, liquid, particulates and gases
will evolve. Carbon monoxide, carbon dioxide, and unidentified
organic compounds may be formed.
Waste disposal methods: dispose of in an approved disposal facility in
compliance with local, state, and federal laws and regulations.
Ingred name: 1-decene, homopolymer, hydrogenated
cas: 68037-01-4
= wt: 86.
other rec limits: none recommended
ingred name: bentonite (inorganic clay)
cas: 1302-78-9
rtecs #: ct9450000
= wt: 6.
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: fatty acid amides
cas: 64754-98-9
= wt: 4.
other rec limits: none recommended
ingred name: other components
= wt: 4.
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) > 2,000 mg/kg
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: effects of overexposure: no
significant effects expected. Oral toxicity: practically non-toxic.
dermal toxicity: practically non-toxic. Inhalation toxicity: not
applicable. Harmful concentrations of mists and/or vapors are
unlikely to be encountered through any customary or reasonably
foreseeable handling, use, or misuse of this product. Eye
irritation: practically non-irritating. Skin irritation :
practically non-irritating. Subchronic toxicology: no adverse
effects.
explanation of carcinogenicity: none
effects of overexposure: no significant effects expected.
medical cond aggravated by exposure: not provided
First aid: eye contact: flush thoroughly with water. if irritation
occurs, call a physician. Skin contact: wash contact areas with
soap and water. high pressure accidental injection through the
skin requires i mmediate medical attention for possibleincision,
irrigation and/or debridement. Inhalation: not expected to be a
problem. Ingestion: not expected to be a problem. However, if
greater than 1/2 liter (p int) ingested, immediately give 1 to 2
glasses of water and call a physician, hospital emergency room or
poison control center for assistance. Do not induce vomiting or
give anything by mouth to an un conscious person.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: >315.6c, 600.F
melt/freeze pt: >232.2c, 450.F
m.P/f.P text: drop point
decomp temp: decomp text: not provided
vapor pres:
vapor density: n/e
spec gravity: 0.946
viscosity: at 40c, cst: 28.0
solubility in water: negligible
appearance and odor: red grease, mild odor.
corrosion rate: not provided
Determined by the toxicity characteristic leaching procedure
(tclp). however, used pr oduct may be regulated.
state regulatory information: the following product ingredients are
cited on the lists below: chemical name
cas number list citations -------------
---------- -----------------------
1,3-propanediol, 2, 115-77-5 1, 10, 20, 21,
23, 2-bis(hydroxymethyl)- 25, 26
1=acgih all 10=osha z 20=il rtk 21=la rtk 23=mn rtk
25=pa rtk 26=ri rtk
Waste disposal methods: product is suitable for burning in an enclosed,
controlled burner for fuel value or disposal by supervised
incineration. Such burning may be limited pursuant to the resource
conservation and recovery act. Product is suitable for processing
by an approved recycling facility or can be disposed of at an
appropriate government waste disposal facility.
Ingred name: pentaerythritol
cas: 115-77-5
rtecs #: rz2490000
minumum % wt: 1.
maxumum % wt: 5.
other rec limits: not provided
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
Ld50 lc50 mixture: not available
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may be mildly irritating to the
eyes. Skin: prolonged or repeated contact may cause various skin
disorders such as dermatitis, folliculitis or oil acne. Release
during high pressure usage may res ult in injection of grease into
the skin causing local necrosis. Inhalation: no specific
information identified. Ingestion: no specific information
identified.
explanation of carcinogenicity: this product & its components are not
classified as carcinogens by iarc, ntp or osha.
effects of overexposure: eye: may be mildly irritating to the eyes.
skin: prolonged or repeated contact may cause various skin
disorders such as dermatitis, folliculitis or oil acne. Release
during high pressure usage may res ult in injection of grease into
the skin causing local necrosis. Inhalation: no specific
information identified. Ingestion: no specific information
identified. Local necrosis is evindenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: eye: flush with water for 15 mins. While holding eyelids
open. Get medical attention. Skin: remove contaminated clothing &
wipe excess off. Wash with soap & water or a waterless hand cleaner
followed by soap & water. Do not reuse clothing until thoroughly
cleaned. If irritation persists, get medical attention. If material
is injected under the skin, get medical attention promptly to
prevent seriou s damage; do not wait for symptoms to develop.
inhalation: remove victim to fresh air & provide oxygen if
breathing is difficult. Get medical attention. Ingestion: do not
induce vomiting. If large amt . Ingested, seek medical advise.
Hcc: v6
boiling pt: b.P. Text: not available
vapor pres: not available
spec gravity: not available
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: amber, smooth, slight odor
Stability indicator/materials to avoid: yes
contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flame .
hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates & gases will evolve when this material
undergoes pyrolysis or combustion. Carbon monoxide & unidentified
organic compounds.
conditions to avoid polymerization: will not occur.
Waste disposal methods: if this product becomes a waste, it would not be
a hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local regulations.
Ingred name: based upon data available, this product is not hazardous
under osha hazard communication (29 cfr 1910.1200)
ingred name: polyalphaolefins
cas: 68037-01-4
= wt: 86.
ingred name: inorganic clay
cas: 1302-78-9
= wt: 6.
ingred name: fatty acid amides
cas: 64754-98-9
= wt: 4.
ingred name: other components
= wt: 4.