NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of industrial types of equipment by means of cups, grease fittings, or pressure lubricating systems. If special characteristics are required, see specific item names.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $127.98 to $213.30.. | |
| Does NSN 9150-00-180-6382 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Poland, Bulgaria, Brazil, Spain, Singapore, Australia, Republic Of Korea, United Kingdom, Portugal, Italy, Greece, and Turkey | |
| What is the NIIN of NSN 9150-00-180-6382? | |
| 001806382 or 00-180-6382 | |
| Does NSN 9150-00-180-6382 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-180-6382? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Feb 06, 1970 | |
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eyes: mild
irritation.Skin: prolonged/repeated contact may cause
dermatitis,folliculitis/oil acne.Release during high pressure usage
may result in injection & necrosis.Inhalation: vapors may irrita te
the nose,throat & upper respiratory tract.Ingestion: low order of
toxicity.Chronic-may cause dermatitis.
explanation of carcinogenicity: no data per msds
effects of overexposure: mild irritation of eyes. Prolonged/repeated
skin contact may cause dermatitis, folliculitis/oil acne. Release
during high pressure usage may result in injection & necrosis.
inhalation of hot vapors ma y irritate the nose, throat & upper
respiratory tract. Ingestion has low order of toxicity.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: get medical help if needed.Inhaled: remove to fresh
air.Provide cpr/oxygen if needed.Oral: don't induce vomiting.No
treatment is necessary unless large amount of product is
ingested.Eye: flush with water for 15 minutes,holding eyelids
open.Skin: wipe excess off.Wash with soap & water.Note to
physician: in general,emesis induction is unnecessary in high
viscosity,low volatility products,i.E.Greases,oils
Hcc: v6
melt/freeze pt: m.P/f.P text: 300f,149c
vapor pres:
solubility in water: insoluble
appearance and odor: dark amber, smooth, slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: heat, open flames and other sources of
ignition
hazardous decomposition products: a mixture of airborne solid,liq.
particulates & gasses will evolve. Co & unidentified organic
compounds may be formed.
Waste disposal methods: place in an approved disposal facility or
dispose of in compliance with all local, state and federal
regulations.
Ingred name: mineral oil, petroleum distillates,hydrotreated
(mild),heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
minumum % wt: 85.
maxumum % wt: 90.
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: bentonite
cas: 1302-78-9
rtecs #: ct9450000
minumum % wt: 5.
maxumum % wt: 10.
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: fatty acid amides
cas: 68910-93-0
minumum % wt: 3.
maxumum % wt: 5.
other rec limits: none recommended
ingred name: additives
fraction by wt: 3-5%
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to the eyes. Skin contact: prolonged or repeated contact may cause
various skin disorderssuch as dermatitis, folliculitis or oil acne.
release during high pressur e usage may result in injection of
grease into the skin causing necrosis. Inhalation: no specific
information identified. Ingestion: no specific information
identified.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by international agency for research on
cancer (iarc), national toxicology program (ntp) or occupational
safety and health aministrati on (osha).
effects of overexposure: irritation of skin and eyes as p[reviously
noted.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothes &
wipe excess off. Wash with soap & water. Do not reuse clothing
until thorou ghly cleaned. If irritation persists, get medical
attention. If material is injected under skin, get medical
attention promptly to prevent serious damage; do not wait for
symptome to develop. Inhaled: remove victim to fresh air. Provide
oxygen if breathing difficult. Get medical attention. Ingested: do
not induce vomiting. In general, no treatment needed unless large
quantities ingested. Get medi cal advice.
Hcc: v6
melt/freeze pt: =148.9c, 300.F
solubility in water: insoluble
appearance and odor: dark amber, smooth, slight odor.
Stability indicator/materials to avoid: yes
contact with strong oxidizing agent.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: thermal decomposition products are
highly dependent on the combustion conditions.
conditions to avoid polymerization: will not occur.
Waste disposal methods: none specified by manufacturer.
Ingred name: hydrotreated heavy paraffinic distillates
cas: 64742-54-7
code: f
rtecs #: py8035500
= wt: 86.4
ingred name: inorganic clay
cas: 1302-78-9
code: f
rtecs #: ct9450000
= wt: 6.
ingred name: fatty acid amides
cas: 68910-93-0
code: f
= wt: 4.
ingred name: other components
= wt: 4.
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to the eyes. Skin contact: prolonged or repeated contact may cause
various skin disorderssuch as dermatitis, folliculitis or oil acne.
release during high pressur e usage may result in injection of
grease into the skin causing necrosis. Inhalation: no specific
information identified. Ingestion: no specific information
identified.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by international agency for research on
cancer (iarc), national toxicology program (ntp) or occupational
safety and health aministrati on (osha).
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothes &
wipe excess off. Wash with soap & water. Do not reuse clothing
until thorou ghly cleaned. If irritation persists, get medical
attention. If material is injected under skin, get medical
attention promptly to prevent serious damage; do not wait for
symptome to develop. Inhaled: remove victim to fresh air. Provide
oxygen if breathing difficult. Get medical attention. Ingested: do
not induce vomiting. In general, no treatment needed unless large
quantities ingested. Get medi cal advice.
Hcc: v6
melt/freeze pt: =148.9c, 300.F
solubility in water: insoluble
appearance and odor: dark amber, smooth, slight odor.
Stability indicator/materials to avoid: yes
contact with strong oxidizing agent.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: thermal decomposition products are
highly dependent on the combustion conditions. Carbon monoxide &
unidentified organic compounds may be fprmed upon combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in appropiate disposal facility in
compliance with local regulations.
Ingred name: solvent refined: hydrotreated heavy paraffinic distillates
cas: 64742-54-7
code: f
rtecs #: py8035500
= wt: 86.
ingred name: inorganic clay
cas: 1302-78-9
rtecs #: ct9450000
= wt: 6.
ingred name: fatty acid amides
cas: 68910-93-0
= wt: 4.
ingred name: other components
= wt: 4.
Ld50 lc50 mixture: ld50 (oral, rat): 5000 mg/m3
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may be mildly irritating to the
eyes. Skin: prolonged or repeated contact may cause various skin
disorders such as dermatitis, follucultitis or oil acne. Release
during high pressure usage may re sult in injection of grease into
the skin causing local necrosis. Inhalation: not expected to be a
relevant route of exposure, however, under high temperature
conditions, vapors irritating to the nose , throat and upper
respiratory tract may be produced. Ingestion: lubricating greases
are generally considered no more than slightly toxic if swallowed.
chronic: this specific product has not been test ed in long-term,
chronic exposure tests.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by iarc, ntp or osha.
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: eye: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing and
wipe excess off. Wash with soap and water or a waterless hand
cleaner fol lowed by soap and water. Do not reuse clothing until
thoroughly cleaned. If irritation persists, get medical attention.
if material is injected under the skin, get medical attention
promptly to preven t serious damage; do not wait for symptoms to
develop. Inhalation: remove victim to fresh air and provide oxygen
if breathing is difficult. Get medical attention. Ingestion: do not
induce vomiting. In general, no treatment is necessary
Hcc: v6
boiling pt: b.P. Text: not available
melt/freeze pt: =148.9c, 300.F
m.P/f.P text: (drop point)
vapor pres: < 0.1 (mm hg)
spec gravity: not available
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: dark amber, smooth solid; slight odor
Stability indicator/materials to avoid: yes
contact with strong oxidizing agents
stability condition to avoid: avoid heat, open flame
hazardous decomposition products: thermal decomposition products are
highly dependent on the combustion conditions. A compley misture of
airborne solid, liquid particulates and gases will evolve when this
material undergoes pyrolysis.
conditions to avoid polymerization: will not occur
Waste disposal methods: if this product becomes a waste, it would not be
a hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local regulation.
Ingred name: hydrotreated heavy paraffinic distillates
cas: 64742-54-7
rtecs #: py8035500
minumum % wt: 85.
maxumum % wt: 90.
ingred name: inorganic clay
cas: 1302-78-9
rtecs #: ct9450000
minumum % wt: 5.
maxumum % wt: 10.
ingred name: fatty acid amides
cas: 68910-93-0
minumum % wt: 3.
maxumum % wt: 5.
ingred name: additives
minumum % wt: 3.
maxumum % wt: 5.