Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Engine Lubricating Oil

NSN: 9150-00-188-9865 | Model: BRAYC0423H

A petroleum oil, a synthetically prepared product, or a combination thereof, prepared primarily for lubrication in crank cases of internal combustion engines. It usually contains additives for corrosion prevention and oxidation prevention, and may contain detergents. See also lubricating oil, general purpose. It does not include lubricating oil, aircraft piston engine.

NSN Properties and Flags
NATO Stock Number
9150-00-188-9865
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Any acceptable
Minimum Viscosity Index
85.0
Service Characteristics
Antifoam and antiwear and corrosion resistive
Quantity Within Each Unit Package
5.000 gallons
Viscosity At Rated Temp
16.80 210 degrees fahrenheit and 22.70 210 degrees fahrenheit
Maximum Pour Point
15.0 degrees fahrenheit
Minimum Flash Point And Test Method
450.0 degrees fahrenheit cleveland open cup
Nondefinitive Specification/std Data
50 grade

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-188-9865 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • BRAYC0423H
  • MIL-L-2104
  • MIL-L-2104
  • BRAYC0423H
  • MIL-L-2104
  • BRAYC0423H
  • MIL-L-2104
  • BRAYC0423H
  • MIL-L-2104
  • BRAYC0423H
  • MIL-L-2104
  • BRAYC0423H
  • MIL-L-2104
  • BRAYC0423H
  • MIL-L-2104
Cage Codes:
  • Castrol Industrial North America (CAGE 98308)
  • Military Specifications (CAGE 81349)
Replacements:
  • 9150-00-188-9865 replaces 9150-00-231-9041
  • 9150-00-188-9865 replaces 9150-00-265-9442
Schedule B & Trade:
  • Schedule B: 2710193020 (NAICS 324110)

    Automotive, diesel or marine engine (except turbine) lubricating oils

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

NSN Management Codes:
  • SOS
    S9g
  • AAC
    V
  • Quantity per pack
    No qup
  • Unit of Measure
    Cn
  • Shelf Life
    N/A
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $62.25 to $103.75..
Does NSN 9150-00-188-9865 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Republic Of Korea, and Greece
What is the NIIN of NSN 9150-00-188-9865?
001889865 or 00-188-9865
Does NSN 9150-00-188-9865 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-188-9865?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Mar 03, 1971
MSDS

Material Safety

MSDS BDHPG WOLF'S HEAD SPECIAL DUTY SERIES 3 OIL 50

Hazards

Effects of overexposure: skin: prlng expos poss dermatitis. Inh: poss
aspir pneum from mist. Ingest: poss navsea,laxative eff

First Aid

First aid: eyes: flush w/ clean,warm water. If liq is hot treat for
burns,call md. Skin: wipe off excess. Wash w/ soap/water. If liq
hot, chill area, treat for shock, call md. Inh: remove to fresh
air. If nec,gi ve artif resp,call md. Ingest: do not induce vomit

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >1000f
spec gravity: 0.901
solubility in water: negligible
appearance and odor: opaque - dark - mild odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizers
stability condition to avoid: none
hazardous decomposition products: carbon monoxide & soot can be prod in
an o*2 deficient fire.

Proper Disposal

Waste disposal methods: disposal must be iaw all applicable local, state
& fed laws. Quantities may be disposed of by controlled
incineration or in a sanitary landfill accd to mfr.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum hydrocarbon (tlv of 5 mg/cum oil mist)

MSDS BDHPH AUTOLINE FLEX C MOTOR OIL, GRADE 50

Hazards

Effects of overexposure: prolonged/frequent exposure can cause minor
skin/eye irrit

First Aid

First aid: skin: wash thoroughly w/mild soap & water. Eye: immed flush
w/water at least 15 min, call md.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 685-1000f
spec gravity: 0.88
appearance and odor: petroleum motor oil, dark

Reactivity

Stability indicator/materials to avoid: yes

Proper Disposal

Waste disposal methods: incinerate or proper disposal area, mfr. Dispose
iaw local, state, fed reg.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: base stock
fraction by wt: 89%

ingred name: lubrizol 4801
fraction by wt: 11%

MSDS BDHPJ MORALUBE MOTOR OIL, GRADE 50

Hazards

Effects of overexposure: low toxicity may cause mild skin irrit on
repeated/prolonged cntct. May cause eye burns.

First Aid

First aid: in case of skin cntct, wash thoroughly w/soap & warm water.

if splashed into eyes, flush w/clear water for at least 15 min or
until irrit subsides. Call md.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 500-900f
spec gravity: 0.89
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: dark amber colored liquid.Mil hydrocarbon odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidants, liq cl, conc oxygen. Na or ca hypochlorite.

hazardous decomposition products: fumes, smoke, co, sox, in the case of
incomplete combustion

Proper Disposal

Waste disposal methods: assure conformity w/applicable disposal reg.

dispose of absorbed matl at apprvd waste disposal site or facility.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192

ingred name: detergent

MSDS BDHPK 12315 S-3 MOTOR OIL, 50 GRADE

Hazards

Effects of overexposure: prolonged or repeated skin contact may cause
mild skin irritation

First Aid

First aid: skin: wash thoroughly w/soap & warm water.Eyes: if
splashed,flush w/clear water for 15 min or until irritation
subsides.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 750f
vapor density: >12
spec gravity: 0.89
evaporation rate & reference:
solubility in water: negligible
appearance and odor: dark amber liquid.Mild petroleum odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidants like: liq chlorine,conc o*2,ca hypochlorite
hazardous decomposition products: fumes,smoke,co & sulfur oxides in case
of incmplt combust

Proper Disposal

Waste disposal methods: dispose at approved facility iaw fed,state &
local codes.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum lubricating base oil
fraction by wt: 90%

ingred name: detergent inhibitor package
fraction by wt:

MSDS BDHPL SUPER HEAVY DUTY,MIL-C-2104C,GRADE 50

Hazards

Effects of overexposure: avoid skin & eye contact

First Aid

First aid: skin: wash w/soap & water. Eyes: immed flush w/water for at
least 15 min. Call md.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 400+f
spec gravity: 0.90
appearance and odor: mild petroleum odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidants, like liquid chlorine & concentrated oxygen
hazardous decomposition products: carbon monoxide in the case of
incomplete combustion
conditions to avoid polymerization: mfg states no polymerization under
normal operatng cndns.

Proper Disposal

Waste disposal methods: incineration under controlled conditions.

dispose iaw local, state, fed regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum lube oil

MSDS BDHPM CONOCO FLEET MOTOR OIL, GRADE 50

Hazards

Effects of overexposure: excess inh of mists/vapors: pulmonary
disorders. May cause eye irrit. Skin irrit poss.

First Aid

First aid: eye: immed flush w/water at least 15 min, call md. Skin: wash
thoroughly w/soap & water. Remove contam clothing & wash before
reuse. Grossly contam leather shoes should be discarded. Ingest: lg
amts, induce vomit. Call md. Inh: call md!

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 600f init
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: clear brown viscous liq, slight odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidiaing matls, heat, flame
hazardous decomposition products: normal combust: co*2, water vapor.

incomp combust: co.

Proper Disposal

Waste disposal methods: mfr suggests controlled incineration, store for
professional removal & disposal. Avoid drainage into sewer. Dispose
iaw local, state, fed reg.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lubricating oil

MSDS BDHPN OE-50( MC 1109)

Hazards

Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.

First Aid

First aid: skin: wash with soap and water. Eyes: flush with water.

inhaled: remove to fresh air. Remove contaminated clothing.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >600f
vapor pres:
vapor density:
spec gravity:
evaporation rate & reference:
solubility in water: negligible
appearance and odor: dark amber liquid,no odor.

percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: heat, ignition sources
hazardous decomposition products: only when burning,gives carbon
monoxide & carbon dioxide.

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum based lubricants(oil)
fraction by wt: 100%

MSDS BDHPP OE-50 (MC 1094)

Hazards

Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.

First Aid

First aid: skin: wash with soap and water. Eyes: flush with water.

inhaled: remove to fresh air. Remove contaminated clothing.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >600f
vapor pres:
vapor density:
spec gravity:
evaporation rate & reference:
solubility in water: negligible
appearance and odor: dark amber oil,no odor
percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: heat, ignition sources
hazardous decomposition products: only when burning,gives carbon
monoxide & carbon dioxide.

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum based lubricants(oil)
fraction by wt: 100%

MSDS BDHPQ ZEPHYR,MIL-L-2104C,LUBE OIL, GRADE 50

Hazards

Effects of overexposure: avoid skin & eye contact

First Aid

First aid: skin: wash w/soap & water.Eyes: immediately flush w/water for
at least 15 minutes. Call md.

Chemical Properties

Hcc: v6
nrc/state lic num: na
boiling pt: b.P. Text: 400+f
spec gravity: 0.90
appearance and odor: mild petroleum odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidants-like liquid chlorine & concentrated oxygen
hazardous decomposition products: carbon monoxide in the case of
incomplete combustion
conditions to avoid polymerization: mfg states no polymerization under
normal operating cndns

Proper Disposal

Waste disposal methods: incineration under controlled conditions.Dispose
in accordance w/local,state & federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum lube oil

MSDS BDHPR EDL MULTISERVICE 50, MIL-L-2104C

Hazards

Effects of overexposure: could cause mild skin irrit in certain allergic
individuals

First Aid

First aid: wash skin thoroughly w/soap & water. If splashed in eyes,
immed flush w/water for at least 15 min. If irrit persists, see md.

Chemical Properties

Hcc: v6
nrc/state lic num: na
boiling pt: b.P. Text: >700f
vapor density: 12.

evaporation rate & reference:
solubility in water: negligible
appearance and odor: oily mild hydrocarbon odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidants such as liquid chlorine & concentrated o*2
hazardous decomposition products: co, incomplete combustion

Proper Disposal

Waste disposal methods: dispose iaw local, state, fed regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum refined lube oil stock

ingred name: additives, petroleum

MSDS BMQRW OE/HDO-50, MIL-L-2104C

Hazards

Ld50 lc50 mixture: oral-rat approx. Ld50 > 5 g/kg
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: inhalation, eyes and skin: believed to
be minimally irritating.

effects of overexposure: none specified by manufacturer.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: as with most foreign materials, should eye contact
occur, flush eyes with plenty of water. skin, ingestion, and
inhalation: none considered necessary.

Chemical Properties

Hcc: v6
spec gravity: 0.900
viscosity: 19.2 cst
appearance and odor: bright and clear.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: high temperatures, sparks, and open
flames.

hazardous decomposition products: carbon monoxide, carbon dioxide,
aldehydes and ketones, combustion products of nitrogen and sulfur.

Proper Disposal

Waste disposal methods: under rcra, it is the responsibility of the user
of products to determine, at the time of disposal, whether product
meets rcra criteria for hazardous waste. Follow all applicable
local, state and fede ral regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrotreated bright stock based lubricating oil
cas: 72623-83-7
fraction by wt: 51-56%
other rec limits: none specified

ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 33-43%
other rec limits: none specified
acgih tlv: 5 mg/m3 (oil mist)

ingred name: zinc dialkyldithiophosphate & zinc diaryldithiophosphate
(mixed)
cas: 68649-42-3
fraction by wt:
other rec limits: none specified

ingred name: additives
fraction by wt: 6-11%
other rec limits: none specified

MSDS BNTBG STAR PACK 50

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is mildly irritating to body
tissues. Most likely hazard is that of breathing the mist or vapors
should the product be heated or misted.

explanation of carcinogenicity: the product contains no ingredient that
is listed by iarc, ntp or osha as a carcinogen.

effects of overexposure: eye: mild irritation. Skin: possible mild
irritation. Inhaled: respiratory irritation,possible pulmonary edema
if mist is inhaled. Ingested: g/i irritation, possible nausea
medical cond aggravated by exposure: none reported

First Aid

First aid: eye: flush w/water 15 min, hold lids open. Skin: wash with soap
& water. Remove contaminated clothing and launder before reuse.

inhaled: remove to fresh air. Restore breathing if necessary.

ingested: do n ot induce vomiting. Give 2 large glasses of milk or
water and get immediate medical care. Give nothing by mouth if
unconscious. If irritation persists or is severe,see a doctor.

Chemical Properties

Hcc: v6
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: yellow to dark amber liquid
percent volatiles by volume: nil

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon dioxide,carbon monoxide

Proper Disposal

Waste disposal methods: dispose i/a/w federal,state, local regulations.

hmis suggests recycle or if that is not practicle to incinerate.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192

ingred name: additives
other rec limits: none specified

MSDS BQCNX AMOCO 300 MOTOR OIL SAE 50

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-ingestion: low toxicity. May
cause gi tract irritation. Inhalation: inhalation of
mist/vapors/fumes may cause respiratory tract irritation. Small
amount aspirated into lungs may cause chemical pne umonitis.

eye: irritation. Skin: repeatedcontact may cause irritation.

chronic: dermatitis, oil acne or folliculitis.

explanation of carcinogenicity: none
effects of overexposure: eyes: redness or irritaion, skin: dryness,
flaking. Ingestion: diarrhea. Inhalation of mist/vapors: coughing or
difficulty in breathing.

medical cond aggravated by exposure: skin diseases.

First Aid

First aid: skin: remove contaminated clothing. Wash with soap and water.

get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.

eye: i mmediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.

Chemical Properties

Hcc: v6
spec gravity: 0.9
solubility in water: negligible
appearance and odor: dark brown liquid, mild petroleum odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, such as chlorates, nitrates, & peroxides
stability condition to avoid: open flames, high heat.

hazardous decomposition products: fumes, smoke, oxides of sulfur and
carbon, aldehydes.

Proper Disposal

Waste disposal methods: place contaminated materials in disposable
containers & dispose of in accordance w/federal, state, & local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: distillates, hydrotreated heavy paraffinic.

cas: 64742-54-7
rtecs #: py8035500
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm

ingred name: zinc alkyldithiophosphate.

cas: 68649-42-3
other rec limits: none recommended