NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of industrial types of equipment by means of cups, grease fittings, or pressure lubricating systems. If special characteristics are required, see specific item names.
The last inventory check on this NSN was done on 04/12/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $272.00 to $453.33.. | |
| Does NSN 9150-00-235-5555 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Brazil, Spain, Thailand, Australia, Canada, New Zealand, Germany, Republic Of Korea, United Kingdom, Portugal, Italy, Denmark, Greece, and Turkey | |
| What is the NIIN of NSN 9150-00-235-5555? | |
| 002355555 or 00-235-5555 | |
| Does NSN 9150-00-235-5555 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-235-5555? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1963 | |
Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.
First aid: ing: do not induce vomig.If aspiration is caused by
vomitg,obtain medical attn immediately;skin rashes as a result of
prolonged contact obtain medical advice;eyes: effected eyes should
be washed immedia tely w/h*2o for 15 mins.
Hcc: v6
spec gravity: unk
solubility in water: negligible
appearance and odor: grease(paste-like solid)
Stability indicator/materials to avoid: yes
none noted by mfr.
hazardous decomposition products: co,co*2,oxides of molybdenum.
conditions to avoid polymerization: unknown.
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations mfr specified that
drainage systems,rivers or waterways should not be contaminated.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum hydrocarbon
fraction by wt: unk
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: unk
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
ingred name: diatomaceous clay
fraction by wt: unk
Effects of overexposure: eyes: irritation;skn: dermtitis,oil acne on
prolonged contact.Inhal: resp irritation;ingest: g.I.Disturb
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
solubility in water: negligible
appearance and odor: black buttery clay thickened grease,slight petodor
Stability indicator/materials to avoid: yes
strong,oxidizing agents
stability condition to avoid: heat, open,flame
hazardous decomposition products: burning will give co or other organic
compounds.
Waste disposal methods: dispose of collectedmaterial in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: solvent refine,hydrotreated residual oil (take tlv as oil
mist,5mg/cum
fraction by wt: >76%
acgih tlv: 5mg/cum(oilmist
ingred name: sodium nitrite (sara iii)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: synthetic aromatic amine
fraction by wt: >0.5%
acgih tlv: not specified
ingred name: other components (unidentified)
fraction by wt:
acgih tlv: not specified
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause skin and eye irritation.
effects of overexposure: may cause skin and eye irritation upon
prolonged or repeated contact.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
spec gravity: 0.924
solubility in water: negligible
appearance and odor: gray semi-solid grease,w/mineral oil odor.
Stability indicator/materials to avoid: yes
strong oxidizers such as chromic acid,hydrogen peroxide,br*2
stability condition to avoid: heat, ignition sources
hazardous decomposition products: co and co2; oxides of calcium, and
sulfur. possible hydrogen sulfide.
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum hydrocarbon plus additives
rtecs #: 9999999zz
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: under high temperature
conditions,vapors may irritate nose and throat. Eyes: may cause mild
irritation on contact. Skin: components are unlikely to be absorbed
through skin.Prolonged/repeated con tact may cause dermatitis,
folliculitisor oil acne. Ingestion: no specific information.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: inhalation: not expected route of entry.Under
high temperature conditions,vapors may irritate nose and throat.
eyes: may cause mild irritation on contact. Skin: components are
unlikely to be absorbed thr ough skin.Prolonged/repeated contact
may cause dermatitis, folliculitis or oil acne. Ingestion: no
specific information.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
boiling pt: b.P. Text: 700f,371c
melt/freeze pt: m.P/f.P text: 500f,260c
spec gravity: 0.89
solubility in water: negligible
appearance and odor: dark gray grease - bland odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: a mixture of airborne solid, liquid
particulates & gases such as oxides of carbon and sulfur will
evolve upon combustion
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 24.9%
other rec limits: none specified
ingred name: solvent,dewaxed residual oil (petroleum)
cas: 64742-62-7
fraction by wt: 50.6%
other rec limits: none specified
ingred name: calcium sulfonate
cas: 68783-96-0
fraction by wt: 4.0%
other rec limits: none specified
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 5.0%
other rec limits: none specified
ingred name: zinc dithiophosphate
cas: 19210-06-1
rtecs #: te4800000
fraction by wt: 3.0%
other rec limits: none specified
ingred name: 4-hydroxy-3,5-di-tert-butylphenylpropionic acid
thioglycolate; as an oxidant component
cas: 41484-35-9
rtecs #: da8342500
fraction by wt: 0.5%
other rec limits: none specified
ingred name: urea - ditallow alkyl derivative
cas: 67774-69-0
fraction by wt: 12.0%
other rec limits: none specified
Ld50 lc50 mixture: tlv for antimony is 0.5 mg/m3.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: acute- eyes: can cause irritation,
redness, blurred vision. Skin: prolonged/repeated contact can cause
irritation, dermatitis. Ingestion: can cause gastrointestinal
irritation, nausea, vomiting and diarr hea. Inhalation: dust can
cause upper respiratory tract irritation. Chronic- can cause
dryness of skin and dermatitis.
explanation of carcinogenicity: antimony compounds may cause benign and
malignant lung tumors upon inhalation above the tlv (per msds).
effects of overexposure: can cause eye irritation, redness, blurred
vision. Prolonged/repeated skin contact can cause irritation,
dermatitis. Ingestion can cause gastrointestinal irritation,
nausea, vomiting and diarrhea. Inh alation of dust can cause upper
respiratory tract irritation.
medical cond aggravated by exposure: pre-existing skin disorders may be
more susceptible to this material.
First aid: get medical attention if symptoms persist. Skin: remove
excess. Wash skin with soap & water. Eye: flush with water for 15
minutes, holding eyelids open. Inhaled: remove to fresh air &
provide oxygen/cpr if needed. Oral: do not induce vomiting.Keep
warm. Get medical attention.
Hcc: v6
melt/freeze pt: m.P/f.P text: >500f,>260c
vapor density: >1
spec gravity: 0.876
evaporation rate & reference:
solubility in water: nil
appearance and odor: gray/black color paste - characteristic petroleum
odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat, open flames and fire
hazardous decomposition products: irritating and/or toxic fumes
including oxides of carbon, sulfur and nitrogen may be released.
Waste disposal methods: dispose of waste in a chemical landfill as
approved by current local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: antimony trioxide (sara iii)
cas: 1309-64-4
rtecs #: cc5650000
fraction by wt:
other rec limits: none specified
osha pel: 0.5 mg/m3 (sb)
acgih tlv: 0.5 mg sb/m3; 9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: molybdenum disulfide (percentage is trade secret).
cas: 1317-33-5
rtecs #: qa4697000
other rec limits: none specified
ingred name: acetone (sara iii)
cas: 67-64-1
rtecs #: al3150000
fraction by wt:
other rec limits: none specified
osha pel: 1000ppm
acgih tlv: 750ppm/1000stel;9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: naphthenic oil (percentage is trade secret).
other rec limits: none specified
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- may irritate eyes upon contact.
prolonged/repeated skin contact may cause dermatitis, oil acne. If
injected into skin, can cause local necrosis. Inhalation is
unlikely. Ingestion may cause gast rointestinal disturbances such
as diarrhea. Aspiration may cause pulmonary infiltration. Chronic-
dermatitis.
effects of overexposure: eye irritation, dermatitis, nausea, diarrhea
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: get medical attention if symptoms persist. Skin: remove
excess. Wash skin with soap & water. Eye: flush with water for 15
minutes, holding eyelids open. Inhaled: remove to fresh air &
provide oxygen/cpr if needed. Oral: do not induce vomiting.If
vomiting occurs, keep head lower than hips. Treat symptomatically
and supportively. Get medical attention.
Hcc: v6
melt/freeze pt: m.P/f.P text: not known
spec gravity: not known
evaporation rate & reference: not relevant
solubility in water: insoluble
appearance and odor: black buttery clay thickened grease with a slight
petroleum odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat, flames
hazardous decomposition products: carbon monoxide, carbon dioxide and
unidentified organic compounds may be formed.
Waste disposal methods: dispose of in compliance with all local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: residual oils, hydrotreated, solvent refined
cas: 64742-57-0
fraction by wt: >76%
other rec limits: none recommended
osha pel: not established.
acgih tlv: not established.
ingred name: sodium nitrite (sara iii), (incorporated into clay)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
other rec limits: none recommended
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: other components
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: product's ld50 (oral rat) was not stated
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eye: mild irritation.
skin: dermatitis,folliculitis,oi acne possible from prolonged &/or
repeated skin contact. High pressure injection under skin may cause
necrosis. Inhalation: not expected to be a significant route of
exposure. Vaporfrom heating may cause irritation. Ingestion: no
specific information identified.
explanation of carcinogenicity: does not contain any carcinogen
identified by iarc, ntp or osha.
effects of overexposure: irritation as noted in health hazards. Necrosis
from high pressure injection is evidenced by delayed onset of pain
& tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing eyes and skin disorder
may be aggravated to exposure to this product.
First aid: if irritation persists or is severe, get medical attention.
eye: flush w/water for 15 min. Skin: scrape off & wash area w/soap &
water. Remove contaminated clothing & launder before reuse.
inhaled: remov e from exposure. Aid or restore breathing as needed.
ingested: do not induce vomiting. Even though no treatment is
necessary for minimal ingestion, get medical advice.
Hcc: v6
nrc/state lic num: none
solubility in water: insoluble
appearance and odor: black buttery grease, slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agent
stability condition to avoid: heat,open flame
hazardous decomposition products: highly dependent on combustion
conditons. Complex mixture of airborne solid/liq parti/gases; co &
unk organic compounds.
conditions to avoid polymerization: will not occur.
Waste disposal methods: product contains barium (waste no. D005) & may
test positive tclp. Material may be recycled or burned for energy
recovery. Refer to epa & state regulations regarding recycle or
disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: solvent refined hydrotreated residual oil
cas: 64742-57-0
fraction by wt: 70-80%
other rec limits: none recommended
ingred name: bentonite clay 27
cas: 68953-58-2
rtecs #: uz2996400
fraction by wt: 10-15%
other rec limits: none recommended
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 3-8%
other rec limits: none recommended
osha pel: 10 mg mo/m3
acgih tlv: 10 mg mo/m3
ingred name: sodium nitrite (cercla)
cas: 7632-00-0
rtecs #: ra1225000
fraction by wt:
other rec limits: none specified
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: barium dinonylnaphthalene sulfonate
cas: 25619-56-1
fraction by wt:
other rec limits: none specified
ingred name: additives
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: not provided
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to eyes. Skin contact: prolonged or repeated contact may cause
various skin disorders such as dermatitis, folliculitis, oil acne.
release during high pressure usa ge may result in injection of oil
into skin causing local necrosis. Inhalation: not a relevant route
of exposure. However, under high temperature conditions, vapors are
irritating to nose, throat, and upper respiratory tract.
ingestion: no specific information identified. Chronic - product
has not been tested. Lubricating greases are generally considered
to be of a low order of acute toxicity to h umans and animals.
explanation of carcinogenicity: none
effects of overexposure: irritating to eyes. Prolonged or repeated skin
contact may cause various skin disorders such as dermatitis,
folliculitis, oil acne. Release during high pressure usage may
result in injection of oil in to skin causing local necrosis.
inhalation of vapors (generated at high temperatures only) or oil
mists may be mildly irritating to nose, throat, and respiratory
tract. Local necrosis is evidenced by delayed onset of pain and
tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing eye and skin disorders
may be aggravated by exposure to this product.
First aid: eye contact: flush with water for 15 minutes while holding
eyelids open. Get medical attention. Skin contact: remove
contaminated clothing and wipe excess off. Wash skin with waterless
cleaner and/or soap and water. If irritation persists, get medical
attention. If material is injected under skin, get medical
attention promptly to prevent serious damage. Do not wait for
symptoms. Inhalation: remov e victim to fresh air and provide
oxygen if breathing is difficult. Get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is necessary
unless large quantities of product a re ingested. Get medical
advice
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
decomp temp: decomp text: not provided
vapor pres: not available
spec gravity: not available
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: black buttery grease, slight odor.
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: heat, open flame.
hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates and gases will evolve. Carbon monoxide and
unidentified organic compounds may be formed upon combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: contains barium at > 100 mg/l. Under epa-rcra
(40 cfr 261.24), a waste containing barium is hazardous (waste
number d005), if it exhibit the characteristic of toxicity based on
the extracted concentra tion of barium as shown by toxicity
characteristic leaching procedure (tclp). Material may be recycl
ed. (cond. See "other information")
Ingred name: solvent refined, residual oil
cas: 64742-57-0
minumum % wt: 70.
maxumum % wt: 80.
other rec limits: not provided
ingred name: organophilic clay
cas: 68953-58-2
rtecs #: uz2996400
minumum % wt: 10.
maxumum % wt: 15.
other rec limits: not provided
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
minumum % wt: 3.
maxumum % wt: 8.
other rec limits: not provided
ingred name: sodium nitrite
cas: 7632-00-0
rtecs #: ra1225000
< wt: 3.
other rec limits: not provided
ingred name: barium dinonylnaphthalene sulfonate
cas: 25619-56-1
< wt: 1.
other rec limits: not provided
ingred name: other additives
< wt: 10.
other rec limits: not provided