NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of aircraft components such as actuators, engine accessories, control bearings, landing gears, and wheel bearings. It does not include grease, aircraft and instrument and grease, instrument.
The last inventory check on this NSN was done on 01/07/2021. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
635 - Chemicals, other than drugs or sundries
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $36.94 to $61.56.. | |
| Does NSN 9150-00-267-7188 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, Department Of The Navy, Poland, Brazil, Australia, Republic Of Korea, United Kingdom, Philippines, Netherlands, Norway, Greece, and Turkey | |
| What is the NIIN of NSN 9150-00-267-7188? | |
| 002677188 or 00-267-7188 | |
| Does NSN 9150-00-267-7188 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-267-7188? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jul 22, 1973 | |
Ld50 lc50 mixture: not specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: none known to manufacturer.
explanation of carcinogenicity: product contains no ingredients
currently classified as carcinogenic by ntp, iarc or osha.
effects of overexposure: none known to manufacturer.
medical cond aggravated by exposure: no known medical conditions that
might be aggravated by exposure.
First aid: inhalation: no adverse effects expected. Eyes: flush with
water. Skin: wipe off and wash with water. Ingestion: no problem
expected.
Hcc: v6
melt/freeze pt: m.P/f.P text: >550f,>288c
vapor pres: < 5 mm hg
spec gravity: 1.3
solubility in water: insoluble
appearance and odor: yellow
percent volatiles by volume: 0 %
Stability indicator/materials to avoid: yes
oxidizing materials can cause a reaction
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: fluorine products, silicon dioxide,
carbon dioxide, traces of incompletely burned carbon.
Waste disposal methods: dispose of in accordance with federal, state and
local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: grease
fraction by wt: >99.0%
ingred name: polysiloxane (fluorinated)
rtecs #: tr0460000
other rec limits: 5 mg/m3 oil mist
Effects of overexposure: may cause temporary discomfort to eyes
First aid: flush with water
Hcc: v6
boiling pt: b.P. Text: >300f
vapor pres: 5
spec gravity: 1.35
solubility in water: 0.1%
appearance and odor: paste-like very little odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
none known
hazardous decomposition products: silicon dioxide,carbon
dioxide,fluorine products
Waste disposal methods: can be landfilled or burned in accordance with
local regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone compound
fraction by wt: 100%
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged and repeated contact with
skin may cause skin irritation. Decomposition products formed at
high temperatures above 250c (554f) may cause "polymer fever."
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: skin-irritation.
medical cond aggravated by exposure: no known medical condition that
maybe aggravated by exposure.
First aid: inhaled-remove to fresh air. Seek medical attention if
needed. Eyes-flush with water. Get medical attention. Skin-wipe off
and wash with soap and water. Ingested-no known adverse effects.
consult a ph ysician.
Hcc: v6
boiling pt: b.P. Text: >500f,>260c
melt/freeze pt: m.P/f.P text: >550f,>288c
vapor pres: < 5
spec gravity: 1.3
evaporation rate & reference: none specified by mfr.
solubility in water: negligible
appearance and odor: yellow, slight petroleum odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents can cause a reaction.
stability condition to avoid: avoid contact with strong oxidizing
agents.
hazardous decomposition products: fluorine products, silicon dioxide,
carbon dioxide, traces of incompletely burned carbon.
Waste disposal methods: dispose of in accordance with local, state and
federal environmental regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non-hazardous ingredients
fraction by wt: 100%
other rec limits: none recommended
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: none. Chronic: none.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: prolonged and repeated contact with skin may
cause skin irritation. Decomposition products at high temperatures
above 250c may cause "polymer fever."
medical cond aggravated by exposure: no known medical conditions that
might be aggravated by exposure.
First aid: inhalation: remove to fresh air if necessary seek medical
attention. Eyes-flush with water, get medical attention.
skin-wipe off and wash with soap and water. Ingestion: no known
adverse effects are known, consult physician.
Hcc: v6
boiling pt: >260.C, 500.F
melt/freeze pt: >287.8c, 550.F
vapor pres:
spec gravity: 1.86
solubility in water: negligible
appearance and odor: yellow grease, slight petroleum odor
Stability indicator/materials to avoid: yes
oxidizing materials can cause a reaction.
stability condition to avoid: strong oxidizers
hazardous decomposition products: fluorine products, silicon dioxide,
carbon dioxide, traces of incompletely burned carbon.
conditions to avoid polymerization: will not occur
Waste disposal methods: dispose of in accordance with federal, state and
local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no hazardous components were knowingly incorporated into
this lubricant.
other rec limits: none recommended
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: none. Chronic: none.
explanation of carcinogenicity: not carcinogenic.
effects of overexposure: prolonged exposure causes no known adverse
effects.
medical cond aggravated by exposure: no known medical conditions that
might be aggravated by exposure.
First aid: inhalation-no problem. Eyes-flush with water. Skin-wipe off
and wash with water. Ingestion-no problem.
Hcc: v6
melt/freeze pt: m.P/f.P text: >550f,>288c
vapor pres:
spec gravity: 1.30
viscosity: not applicabe
solubility in water: nil
appearance and odor: yellow
Stability indicator/materials to avoid: yes
oxidizing materials can cause a reaction.
hazardous decomposition products: fluorine products, silicon dioxide,
carbon dioxide, traces of incompletely burned carbon.
Waste disposal methods: dispose of in accordance with federal, state and
local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingredient
fraction by wt: 100%
other rec limits: none recommended
ld50 lc50 mixture: not given for product as a whole
route of entry inds - inhalation: no
skin: no
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: none specified by manufacturer.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
signs and symptions of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
first aid: inhalation: remove to fresh air. Give artificial respiration if
breathing has stopped. Eyes: flush with water and consult physician. Skin:
wash with soap and water. If irritation occurs, call physicia n. Ingestion:
drink milk or water. Do not induce vomiting. Call physician.
hcc: v6
b.P. Text: not given
m.P/f.P text: >500f,>260c
decomp text: not given
vapor pres: < 5
vapor density: not given
spec gravity: 1.30
viscosity: not given
evaporation rate & reference: not given
solubility in water: nil
appearance and odor: yellow, faint odor
corrosion rate: unknown
product id: christo-lube mcg 200
cage: 0jrd3
company name: lubrication technology inc
street: 310 morton st
city: jackson oh
zipcode: 45640
health emergency phone: 614-286-2644
label required ind: y
date of label review: 09/02/1998
status code: c
mfg label no: none
label date: 09/02/1998
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
health hazard: none
contact hazard: none
fire hazard: none
=======================================================
responsible party cage: 0jrd3
trans id no: 64108
product id: christo-lube mcg 200
msds prepared date: 10/10/1997
review date: 09/02/1998
mfn: 1
net unit weight: 5 grams
multiple kit number: 0
review ind: y
unit of issue: tu
container qty: 0
type of container: tube
Hazard and precautions: store in cool well ventilated area of low fire risk.
avoid breathing vapors. Use self-contained breathing apparatus if over 1000
ppm. First aid: inhalation: remove to fresh air. Give artificial respir ation
if breathing has stopped. Eyes: flush with water and consult physician. Skin:
wash with soap and water. If irritation occurs, call physician. Ingestion:
drink milk or water. Do not induce vomiti ng. Call physician.
spill release procedures: use absorbent material to collect and contain for
salvage or disposal.
neutralizing agent: none specified by manufacturer.
waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or liner in
accordance with all federal, state and local regulations.
handling and storage precautions: store in cool well ventilated area of low
fire risk. Avoid breathing vapors. Use self-contained breathing apparatus if
over 1000 ppm.
other precautions: toxic vapors may evolve above 600f. Provide adequate
ventilation if used above this temperature.
route of entry inds - inhalation: no
skin: no
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: acute & chronic: none
signs and symptions of overexposure: prolonged exposure causes no known adverse
effects.
medical cond aggravated by exposure: no known medical conditions that might be
aggravated by exposure
first aid: inhalation: remove to fresh air, give artificial respiration if
breathing has stopped. eyes: flush with water & consult physician.
skin: wash with soap & water; if irritation occurs, call physician.
ingestion: drink milk or water; do not induce vomiting, call physician.
hcc: n1
melt/freeze pt: >260.C, 500.F
vapor pres: <5 mm
vapor density: nil
spec gravity: 1.30 (h2o=1)
appearance and odor: yellow, faint odor
product id: christ-lube mil-prf-83261b (usaf)
cage: 0jrd3
company name: lubrication technology inc
street: 310 morton st
city: jackson oh
zipcode: 45640
health emergency phone: 614-286-2644
label required ind: y
date of label review: 08/16/1999
status code: a
origination code: f
eye protection ind: no
skin protection ind: no
signal word: none
respiratory protection ind: no
health hazard: none
contact hazard: none
fire hazard: none
=======================================================
responsible party cage: 0jrd3
trans id no: 147314
product id: christ-lube mil-prf-83261b (usaf)
msds prepared date: 02/02/1994
review date: 02/07/2000
mfn: 1
net unit weight: 5 grams
multiple kit number: 0
unit of issue: tu
container qty: 0
type of container: tube
Hazard and precautions: target organs: not identified by manufacturer. Acute
& chronic health hazards: none
spill release procedures: use absorbent material to collect & contain for
salvage or disposal.
waste disposal methods: dispose of in accordance with federal, state &
local regulations.
handling and storage precautions: store in cool well ventilated area of low
fire risk; avoid breathing vapors; use self-contained breathing apparatus if
over 1,000 ppm tlv.
other precautions: toxic vapors may evolve above 600 deg f; provide adequate
ventilation if used above this temperature.