Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Gear Lubricating Oil

NSN: 9150-00-270-0067 | Model: VV-L-765

A petroleum or synthetic product with load-carrying properties, especially prepared for lubrication of various type gears, such as worm gears, spiral bevel type gears, hypoid gears, transmissions, or the like.

NSN Properties and Flags
NATO Stock Number
9150-00-270-0067
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Petroleum base
Minimum Viscosity Index
50.0
Service Characteristics
Antifoam and corrosion resistive
Quantity Within Each Unit Package
5.000 gallons
Viscosity At Rated Temp
25.00 210 degrees fahrenheit and 43.00 210 degrees fahrenheit
Maximum Pour Point
35.0 degrees fahrenheit
Effective Tempurature Range Rating
+110.0/+175.0 degrees fahrenheit
Minimum Flash Point And Test Method
400.0 degrees fahrenheit cleveland open cup
Nondefinitive Specification/std Data
140 grade

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-270-0067 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • VV-L-765
Cage Codes:
  • Federal Specifications (CAGE 81348)
Schedule B & Trade:
  • Schedule B: 2710193080 (NAICS 324110)

    Lubricating oils with or without additives, nesoi

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps sub2

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    R - 65.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    V
  • Quantity per pack
    1
  • Unit of Measure
    Cn
  • Shelf Life
    36 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $131.83 to $219.71..
Does NSN 9150-00-270-0067 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Germany, Republic Of Korea, and Greece
What is the NIIN of NSN 9150-00-270-0067?
002700067 or 00-270-0067
Does NSN 9150-00-270-0067 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-270-0067?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 01, 1963
MSDS

Material Safety

MSDS BDRNM VV-L-765A,GRADE 140 (LUBRICATING OIL)

Hazards

Effects of overexposure: may cause eye and skin irritation on prolonged
or repeated contact.Svoid breathing vapor or fumes.

First Aid

First aid: eye contact: flush with large amounts of water for 15
minutes.Call physician if needed.Skin contact: wash thoroughly with
soap and warm water.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: 700f
vapor pres:
vapor density: >20
spec gravity: 0.90
evaporation rate & reference: 0.01
solubility in water: negligible
appearance and odor: dark brown color,mild petroleum odor
percent volatiles by volume: negl

Reactivity

Stability indicator/materials to avoid: yes
strong oxidants like,liquid chlorine,conc. O*2,na or-ca hypc
stability condition to avoid: none specified by the mfr.

hazardous decomposition products: fumes,smoke,co sulfur oxides in case
of incomplete combustio

Proper Disposal

Waste disposal methods: dispose of the collected materials in accordance
with local,state, federal regulations.Material may be incinerated
in compliance with applicable disposal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: complex mixture of petroleum hydrocarbon base oil
fraction by wt: 100%
acgih tlv: 5mg/cum oilmist

MSDS BJSFN SE 861 3122 LUBRICATING OIL

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: health hazards: acute: none specified
by manufacturer. Chronic: no health hazard when used with good
personal hygiene. May otherwise cause skin and eye irritation upon
prolonged or repeated contact.

explanation of carcinogenicity: none of the ingredients in this product
is listed by ntp, iarc or osha as a carcinogen.

effects of overexposure: eye/skin: irritation upon prolonged or repeated
contact.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: flush with plenty of water for at least 15 minutes.See
doctor. Skin: remove excess with cloth or paper.Wash thoroughly with
soap and water. Inhalation: remove victim to fresh air. Ingestion: do
not induce vomit.See doctor immediately.

Chemical Properties

Hcc: v6
spec gravity: 0.9
viscosity: >100 sus
solubility in water: negligible
appearance and odor: oily liquid. Amber color, mineral oil odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents such as hydrogen peroxide, bromine, and chromic
acid.

stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide,
sulfur oxides, nitrogen oxides, hydrogen sulfide, hydrogen
chloride, chlorocarbons.

Proper Disposal

Waste disposal methods: contact your local environmental officer.

dispose of in accordance with all federal, state and local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum hydrocarbons
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)

ingred name: unspecified additives
other rec limits: none specified

MSDS BLMTG MINERAL GEAR OIL 140

Hazards

Ld50 lc50 mixture: ld50 (oral rat) is >5,000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eyes: minimally
irritating.Skin: slightly irritating with possible redness,edema or
drying of the skin.Inhalation: minimally irritating if not in excess
of 5 mg/m3 (oil mist).Ingestion: low level of
toxicity.Chronic-unknown.

explanation of carcinogenicity: msds generated by dgsc-ssh. Carcinogenic
characteristics unknown.

effects of overexposure: may cause eye, skin & respiratory tract
irritation. Low level of toxicity, if swallowed.

medical cond aggravated by exposure: pre-existing skin disorders

First Aid

First aid: inhalation: none considered necessary.Eye: flush with water for
15 minutes while holding eyelids open.Get medical attention if
irritation persists.Skin: none considered necessary.However,wash
with soap & water.Ingestion: none considered necessary.Call a
doctor if needed.

Chemical Properties

Hcc: v6
spec gravity: 0.9218
viscosity: 30 cst @100c
appearance and odor: dark liquid

Reactivity

Stability indicator/materials to avoid: yes
none
stability condition to avoid: high temperatures and open flames
hazardous decomposition products: carbon monoxide, carbon dioxide,
aldehydes and ketones, combustion products of nitrogen and sulfur

Proper Disposal

Waste disposal methods: product has been evaluated for rcra
characteristics and does not meet criteria of a hazardous waste if
discarded in its purchased form.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hydrotreated c25 bright stock based lubricating oil
cas: 72623-83-7
fraction by wt: 100%
other rec limits: none specified
osha pel: 5 mg/m3 (mist)
acgih tlv: 5 mg/m3 (mist)