NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A petroleum oil, a synthetically prepared product, or a combination thereof, prepared primarily for lubrication in crank cases of internal combustion engines. It usually contains additives for corrosion prevention and oxidation prevention, and may contain detergents. See also lubricating oil, general purpose. It does not include lubricating oil, aircraft piston engine.
The last inventory check on this NSN was done on 06/10/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Parts of armored fighting vehicles, motorized, whether or not fitted with weapons
Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles
Military trucks, armored vehicles, etc.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
145000 - Oil o/t petro lubricating noi
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,229.22 to $2,048.69.. | |
| Does NSN 9150-00-402-2372 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Estonia, Brazil, Spain, Australia, Canada, Republic Of Korea, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 9150-00-402-2372? | |
| 004022372 or 00-402-2372 | |
| Does NSN 9150-00-402-2372 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-402-2372? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Apr 10, 1970 | |
Ld50 lc50 mixture: oral rat=5g/kg;dermal rabbit=3g/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: acute: may irritate
eyes,skin,respiratory or g.I. Tract. Chronic: used oil may be a
problem;has potential for carcinogenicity in lab animals.
explanation of carcinogenicity: used oil has shown to cause skin cancer
on prolonged contact,in lab mice.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
spec gravity: 0.8762
viscosity: 6.0 cst
solubility in water: negligible
appearance and odor: bright and clear liquid
Stability indicator/materials to avoid: yes
may react with oxiding agents
stability condition to avoid: none specified
hazardous decomposition products: irritating and/or toxic fumes upon
decomposition.
Waste disposal methods: dispose of collected material in accordance with
local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic base oil (80-95%)
fraction by wt: 87.5%
other rec limits: 5mg/cum,as oil mist
ingred name: additive package containing
sulfur,nitrogen,zinc,phosphorous (10-20%)
fraction by wt: 15.0%
other rec limits: not specified
Ld50 lc50 mixture: ld50 (oral rat) is > 5.0 g/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause irritation of eyes,
skin, respiratory tract, gastrointestinal tract, central nervous
system disturbances.
explanation of carcinogenicity: product contains no known ingredients
currently classified as carcinogenic by ntp, iarc or osha.
effects of overexposure: eye irritation, skin irritation, respiratory
tract irritation, headache, dizziness, nausea, vomiting.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing diseae involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: inhalation: remove to fresh air. Resuscitate if not
breathing. Get medical attention. Eyes: immediately flush with
plenty of water for 15 minutes holding eyelids open open. Get
medical attention. Skin : remove contaminated clothing. Wash with
soap and water. If irritation persists, get medical advice.
ingestion: do not induce vomiting. Give nothing by mouth if
unconscious. Get immediate medical att
Hcc: v6
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
vapor pres: < 1.0
vapor density: not given
spec gravity: 0.86
evaporation rate & reference: not given
solubility in water: negligible
appearance and odor: dark amber liquid, mild odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks and open flames
hazardous decomposition products: oxides of sulfur, carbon, nitrogen and
phosphorus
Waste disposal methods: consult local authorities. Disposal must be made
in accordance with all applicable local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefins,aliphatic diester,additive package
cas: 68037-01-4
fraction by wt: 100.0%
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-ingestion: irritation of gi
tract. Inhalation: heated mist or vapors may cause irritation of
nose & throat. Minute amounts aspirated into lungs may cause
pulmonary injury. Eye: irritation. Skin: i rritaion.
chronic-prolonged/repeated skin contact may cause irritation, and
dermatitis.
explanation of carcinogenicity: the components of this product have not
shown any evidence of being carcinogenic.
effects of overexposure: skin contact may cause skin irritation. Eye
contact may cause eye irritation.
medical cond aggravated by exposure: persons with a skin disorder should
avoid prolonged contact when handling or using this product.
First aid: skin: remove contaminated clothing. Wash with soap and water.
get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.
eye : immediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.
Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres:
vapor density: >1
spec gravity: 0.88
ph: neutrl
evaporation rate & reference: slower than ether
solubility in water: negligible
appearance and odor: dark amber liquid, mild odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extremely high temperatures
hazardous decomposition products: fumes,smoke., oxides of carbon,
nitrgen, sulfur and zinc.
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lubricating oil base stock
cas: 64791-97-5
fraction by wt: 80-90%
other rec limits: none specified
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist
ingred name: dialkyldithiophosphoric acid, zinc salt.
other rec limits: none specified
Ld50 lc50 mixture: oral ld50 (rat) is >5g/kg estimated
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: on rare occasions, prolonged and
repeated exposure to oil mist poses a risk of pulmonary disease
such as chronic lung inflammation. This condition is usually
asymptomatic as a result of repeated small aspirations. Shortness
of breath and cough are the most common symptoms. Aspiration may
lead to chemical pneumonitis.
explanation of carcinogenicity: iarc has determined there is sufficient
evidence for the carcinogenicity in experimental animals of used
motor oil.
effects of overexposure: generally considered minimally irritating to
the eyes and mildly irritationg to the skin. Prolonged and repeated
contact may result in various skin disorders such as dermatitis,
folliculitis or oil ac ne. Inhalation of vapor or oil mist maycause
mild upper respiratory tract irritation. Slightly toxic if
swallowed.
medical cond aggravated by exposure: preexisting skin and respiratory
disorders may be aggravated by exposure to this product.
First aid: skin: remove contaminated clothing. Wash with soap and water.
get medical attention if irritation develops. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.
eye : immediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: may act as a
laxative. Do not induce vomiting. Relatively non-toxic unless
aspirated.
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
melt/freeze pt: m.P/f.P text: -65f,-54c
decomp temp: decomp text: >500f,>260c
vapor pres: nil
vapor density: >1
spec gravity: 0.86
viscosity: 5.75cs@210f
solubility in water: negligible
appearance and odor: amber lubricating oil, petroleum odor
percent volatiles by volume: 0
corrosion rate: none
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide and other unidentified
organic compounds may be formed upon combustion.
Waste disposal methods: waste may be burned in an approved incinerator
or disposed of in accordance with all applicable local, state and
federal laws and regulations. Recycle if possible.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum based lubricating oil
fraction by wt: >90%
other rec limits: none specified
osha pel: 5 mg/m3 (mist)
acgih tlv: 5 mg/m3 (mist)
ingred name: additives including inhibitors, antiware agents, & zinc
dialkyldithiophosphate.
fraction by wt:
other rec limits: none specified
hcc: v6
b.P. Text: >617f,>325c
decomp text: unknown
vapor pres: 0.01 mmhg
vapor density: > 1
spec gravity: 0.859
solubility in water: moderate
appearance and odor: brown, oily liquid, petroleum odor.
percent volatiles by volume: nil
corrosion rate: unknown
product id: mil-l-46167b gold medal artic engine oil
cage: 2x769
company name: technolube product company
street: 8015 paramount blvd.
city: pico rivera ca
zipcode: 90660-4811
health emergency phone: 213-928-3311
label required ind: y
date of label review: 03/12/1996
status code: c
mfg label no: unknown
label date: 03/12/1996
year procured: 1989
origination code: f
chronic hazard ind: y
eye protection ind: yes
skin protection ind: yes
signal word: caution
health hazard: slight
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: 2x769
trans id no: 70735
product id: mil-l-46167b gold medal artic engine oil
msds prepared date: 01/31/1994
review date: 03/12/1996
mfn: 2
net unit weight: 35.4 lbs
af mmac code: nr
multiple kit number: 0
review ind: y
unit of issue: cn
container qty: 0
type of container: can
Hazard and precautions: avoid storage near open flame or other sources of
ignition. Excessive misting may cause slippery floors. First aid: ingestion:
do not induce vomiting. Aspiration hazard. Consult physician. Inhalation:
remove from contaminated area. Apply artificial respiraation. If unconscious,
consult physician. Eyes: flush with copious amounts of water. If irritation
develops, consult physician. Skin: wash with soap and water. Consult
physician if irritation or inflammation develops.
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: not classified as toxic or irritant or
sensitizer or corrosive.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: ingested-do not induce vomiting! If conscious, give water to
dilute. Do not give sodium bicarbonate, fruit juices, or vinegar.
never give anything by mouth if the victim is unconscious or having
convu lsions. Call physician or poison controlcenter immediately.
eyes-flush with lots of water for at least 15 minutes. If
irritation persists, seek medical attentioin. Skin-wash with soap &
water. Remove clothing. Seek medical attention if irritation
persists. Inhaled-move away fromexposure. Seek medcial attention if
irritation persists.
Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres: 0.01
vapor density: >1
spec gravity: 0.87
ph: neutrl
solubility in water: negligible
appearance and odor: lubricating oil.
Stability indicator/materials to avoid: yes
none specified by manufacturer. Dla-hmis: strong oxidizing agents.
stability condition to avoid: avoid heating to decomposition. Do not
weld, heat, or drill container, residue may ignite with explosive
violence.
hazardous decomposition products: decomposition may produce oxides of
carbon, sulfur, nitrogen, phosphorous and zinc.
Waste disposal methods: all recovered material should be packaged,
labeled, transported and disposed or reclaimed in conformance with
applicable laws and regulationand in conformance with good
engineering practices. Avoid la ndfilling liquids. Reclaim where
possible.
Ingred name: polyalphaolepin aliphatic diester additive package
= wt: 100.
other rec limits: none recommended
ingred name: dialkyldithiophosphoric acid, zinc salt
other rec limits: none recommended
ld50 lc50 mixture: tlv for oil mist is 5mg/m3
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eyes: may cause irritation(fp-d).Skin: not
reported.Ingest: may cause gi tract irritation.May cause lung damage if
vomited after swallowing.Inhal: mists from elevated temperatures may cause
respiratory ir ritation.
explanation of carcinogenicity: none of the ingredients in this product is
listed by ntp, iarc or osha as a carcinogen.
signs and symptions of overexposure: lung irritation.
medical cond aggravated by exposure: none specified by manufacturer.
first aid: skin: remove contaminated clothing;wash with soap and
water.Eyes: flush with water for 15 minutes.Call physician if irritation
develops.Inhal: remove to fresh air.Give oxygen or artificial respiration if
needed.Ingest: do not induce vomiting.Get prompt qualified medical
attention.Note to physician: treat symptomatically.
hcc: v6
decomp text: unknown
vapor pres: <1@68f
vapor density: >1
spec gravity: 0.86
evaporation rate & reference: not volatile
solubility in water: negligible
appearance and odor: dark amber liquid;mild odor.
corrosion rate: unknown
product id: mil-l-46167
cage: velsi
company name: velsicol chemical corporation
street: unknown
city: unknown nk
zipcode: 00000
health emergency phone: 708-298-9000
label required ind: y
date of label review: 11/22/1996
status code: c
mfg label no: unknown
label date: 11/22/1996
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
health hazard: slight
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: velsi
trans id no: 70731
product id: mil-l-46167
msds prepared date: 12/01/1995
review date: 11/22/1996
mfn: 1
net unit weight: 35.9 lbs
af mmac code: nr
multiple kit number: 0
review ind: y
unit of issue: cn
container qty: 0
type of container: can
additional data: none
Hazard and precautions: eyes: may cause irritation(fp-d).Skin: not
reported.Ingest: may cause gi tract irritation.May cause lung damage if
vomited after swallowing.Inhal: mists from elevated temperaturesmay cause
respiratory irr itation. First aid: skin: remove contaminated clothing;wash
with soap and water.Eyes: flush with water for 15 minutes.Call physician if
irritation develops.Inhal: remove to fresh air.Give oxygen or artif icial
respiration if needed.Ingest: do not induce vomiting.Get prompt qualified
medical attention.Note to physician: treat symptomatically.
spill release procedures: ventilate area.Soak up with non-combustible inert
adsorbant(eg.Clay);place collected material in an appropriate container for
disposal;clean spill area to remove slipperiness.
waste disposal methods: contact your local environmental officer. Dispose of in
accordance with all federal,state and local regulations.
handling and storage precautions: store in a cool, dry place with adequate
ventilation. Keep away from sources of ignition and strong oxidants. Keep
containers tightly closed.
other precautions: avoid eye and skin contact. Do not breathe vapors.
effects of exposure: inhalation: product may be considered non-hazardous for
all practical purposes by inhalation. Ingestion: product is not classified as
toxic by oral administration as defined in 16 cfr 1500. Eye contac t: the
product is not classified as an irritant by ocular application as defined by
16 cfr 1500. Skin contact: the material is not classified as a primary
irritant or as a corrosive by dermal applicat ion as defined by 16 cfr 1500.
signs and symptions of overexposure: inhalation: no symptoms given. Considered
non-hazardous by inhalation. Ingestion: no symptoms given. Not classified as
toxic by ingestion. Eye contact: no symptoms given. Not classified as an eye
irri tant. Skin contact: no symptoms given. Not classified as a primary
irritant or as a corrosive by dermal application.
first aid: ingestion: do not induce vomiting. If victim is conscious and able
to swallow, have victim drink water to dilute. do not give sodium
bicarbonate, fruit juices, or vinegar. Never give anything by mout h if
victim is unconscious or having convulsions. Call physician or poison control
center. Skin contact: wash affected area. Eye contact: flush with plenty of
cool water for at least 15 minutes. do not let victim rub eyes. Inhalation:
move victim to fresh air. If not breathing, give artificial respiration,
preferably by mouth-to-mouth. Get medical attention immediately.
hcc: v5
b.P. Text: not determined
vapor pres: <1mm hg pressure @20c
spec gravity: 0.86 @60/60deg f
solubility in water: negligible
appearance and odor: dark amber liquid, mild odor.
product id: emgard 2809-a sae ow-20 synthetic arctic lubricant
cage: to782
assigned ind: y
company name: cognis corp
street: 4900 este ave
city: cincinnati oh
zipcode: 45232
health emergency phone: 800-424-9300
label required ind: y
date of label review: 06/21/2000
status code: a
label date: 06/21/2000
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: yes
health hazard: slight
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: to782
trans id no: 153696
product id: emgard 2809-a sae ow-20 synthetic arctic lubricant
msds prepared date: 01/01/2000
review date: 06/21/2000
mfn: 1
net unit weight: 35.9 lbs
multiple kit number: 0
unit of issue: cn
container qty: 0
type of container: can
additional data: transportation data per manufacturers msds.
Hazard and precautions: inhalation: product may be considered non-hazardous for
all practical purposes by inhalation. Ingestion: product is not classified as
toxic by oral administration as defined in 16 cfr 1500. Eye contac t: the
product is not classified as an irritant by ocular application as defined by
16 cfr 1500. Skin contact: the material is not classified as a primary
irritant or as a corrosive by dermal applicat ion as defined by 16 cfr 1500.
spill release procedures: wear appropriate respiratory protection and
protective clothing. Contain spilled material. Transfer to secure
containers. where necessary, collect using absorbent media. In the event of
an uncontrol led release of this material, the user should determine if the
release is reportable under applicable laws and regulation.
waste disposal methods: all recovered material should be packaged, labeled,
transported, and disposed or reclaimed in conformance with applicable laws
and regulations and in conformance with good engineering practices. avoi d
landfilling of liquids. reclaim where possible.
handling and storage precautions: avoid heating to decomposition. Do not use
pressure to empty drums or explosion may result! Do not weld, heat, or drill
container. Residue may ignite with explosive violence if heated sufficiently.
us er is advised to have a safety expert evaluate the specific conditions of
use.
other precautions: avoid uncontrolled releases of this material. where spills
are possible, a comprehensive spill response plan should be developed and
implemented.
ld50 lc50 mixture: no data provided by manufacturer
route of entry inds - inhalation: no
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: skin: similar materials are not classified as skin
irritants. The skin irritation score for this substance has not been
determined. Eye: similar materials are not classified as eye irritants. The
eye irritation score for this substance has not been determined. Inhalation:
inhalation of mist may cause irritation of the respiratory system. Ingestion:
similar materials are not considered toxic. chro nic: none known. no
effects of chronic exposure or target organ effects are known. No exposure
limits have been established for this product.
explanation of carcinogenicity: no carcinogenicity, mutagenicity or
teratogenicity are known.
signs and symptions of overexposure: inhalation of mist may cause irritation of
the respiratory system.
medical cond aggravated by exposure: no data provided by manufacturer.
first aid: skin: wash affected area with soap and water. Eye: immediately flush
eyes with plenty of cool water for at least 15 minutes. Do not let victim rub
eyes. Get medical attention if irritation develops. I nhalation: immediately
remove victim to fresh air. If victim has stopped breathing, give artificial
respiration, preferably, mouth to mouth. Get medical attention immediately.
ingestion. Call a physic ian or poison control center immediately.
hcc: v6
b.P. Text: not determined
m.P/f.P text: not determined
vapor pres: not determined
vapor density: n/d
spec gravity: 0.888
ph: not determined
evaporation rate & reference: not determined
solubility in water: insoluble
appearance and odor: amber liquid, mild ester odor
product id: emgard 2810-a artic 0w30 engine oil
cage: to539
assigned ind: y
company name: cognic corporation
street: 5051 estecreek drive
city: cincinnati oh
zipcode: 45232
health emergency phone: 800-543-7370
label required ind: y
date of label review: 02/22/2001
status code: a
year procured: 2001
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: no
health hazard: slight
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: to539
trans id no: 156059
product id: emgard 2810-a artic 0w30 engine oil
msds prepared date: 05/01/2000
review date: 02/22/2001
mfn: 2
net unit weight: 37 lbs
multiple kit number: 0
unit of issue: cn
container qty: 0
type of container: can
additional data: not regulated for shipping per msds.
Hazard and precautions: combustible! Target organs: n/p. Health hazards:
non-hazardous under normal conditions of use. First aid: skin: wash affected
area with soap and water. Eye: immediately flush eyes with plenty of cool
water for at least 15 minutes. Do not let victim rub eyes. Get medical
attention if irritation develops. Inhalation: immediately remove victim to
fresh air. If victim has stopped breathing, give artif icial respiration,
preferably, mouth to mouth. Get medical attention immediately. Ingestion.
call a physician or poison control center immediately.
spill release procedures: add dry material to absorb spill (if large spill,
dike to contain). Using recommended protective equipment, pick up bulk of
spill and containerize for recovery or disposal. Flush area with water to re
move residues.
neutralizing agent: no data provided by manufacturer.
waste disposal methods: all recovered material should be packaged, labeled,
transported, and disposed or reclaimed in conformance with applicable laws
and regulations and in conformance with good engineering practices. Avoid
landfilling of liquids. Reclaim where possible.
handling and storage precautions: no special precautions necessary. Avoid
container damage while handling and storing.
other precautions: no data provided by manufacturer.
Ld50 lc50 mixture: lc50 (inhalation, rat) 4.68 mg/l/1 hr
health hazards acute and chronic: inhalation: product may be considered
non-hazardous for all practical purposes by inhalation. Ingestion:
product is not classified as toxic by oral administration as
defined in 16 cfr 1500. Eye contac t: the product is not classified
as an irritant by ocular application as defined by 16 cfr 1500.
skin contact: the material is not classified as a primary irritant
or as a corrosive by dermal applicat ion as defined by 16 cfr 1500.
explanation of carcinogenicity: not provided
effects of overexposure: none
medical cond aggravated by exposure: not provided
First aid: ingestion: do not induce vomiting. If victim is conscious and
able to swallow, have victim drink water to dilute. do not give
sodium bicarbonate, fruit juices, or vinegar. Never give anything
by mout h if victim is unconscious or having convulsions. Call
physician or poison control center. Skin contact: wash affected
area. Eye contact: flush with plenty of cool water for at least 15
minutes. do not let victim rub eyes. Inhalation: move victim to
fresh air. If not breathing, give artificial respiration,
preferably by mouth-to-mouth. Get medical attention immediately.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: not determined
melt/freeze pt: m.P/f.P text: not provided
decomp temp: decomp text: not provided
vapor pres:
spec gravity: 0.86 @60/60deg f
viscosity: not provided
evaporation rate & reference: not provided
solubility in water: negligible
appearance and odor: dark amber liquid, mild odor.
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
not provided
stability condition to avoid: avoid heating to decompostion. The user is
advised to have a safety expert evaluate the specific conditions of
use.
hazardous decomposition products: decomposition may produce oxides of
carbon, sulfur, nitrogen, and phosphorus.
Waste disposal methods: all recovered material should be packaged,
labeled, transported, and disposed or reclaimed in conformance with
applicable laws and regulations and in conformance with good
engineering practices. avoi d landfilling of liquids. reclaim
where possible.
Ingred name: proprietary polyalphaolefin
other rec limits: not provided
osha pel: none
acgih tlv: none
ingred name: proprietary diester
other rec limits: not provided
osha pel: none
acgih tlv: none