NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
609 - Petroleum products or derivatives, with flashpoint higher than 80 degrees (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $752.65 to $1,254.42.. | |
| Does NSN 9150-00-404-6055 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, and Greece | |
| What is the NIIN of NSN 9150-00-404-6055? | |
| 004046055 or 00-404-6055 | |
| Does NSN 9150-00-404-6055 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-404-6055? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Aug 08, 1969 | |
Effects of overexposure: none specified.
First aid: none specified.
Hcc: v6
boiling pt: b.P. Text: 660f
vapor pres: neg
spec gravity: 0.875
evaporation rate & reference: none
solubility in water: insoluble
appearance and odor: waterwhite liquid-no odor or taste.
percent volatiles by volume: none
Stability indicator/materials to avoid: yes
open flame or exposure to excessive
stability condition to avoid: not specified by the mfgr
hazardous decomposition products: none
Waste disposal methods: dispose in accordance with federal,state and
local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
fraction by wt: 100%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192
Ld50 lc50 mixture: tdlo ipr-mouse: 14 gm/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: inhalation of vapor or mists can cause
aspiration pneumonia.
explanation of carcinogenicity: irac "3". Mineral oils are suspected
carcinogens of the skin and scrotum, larynx, lung and alimentary
tracts.
effects of overexposure: may cause eye, skin & respiratory tract
irritation.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
melt/freeze pt: m.P/f.P text: low temp
spec gravity: 0.84
viscosity: 97-107@100f
solubility in water: negligible
appearance and odor: colorless, oily liquid, practically odorless
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide and other unidentified
hydrocarbons from combustion.
Waste disposal methods: discard any product (including any retained
materials of use), disposable container or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations. Prod uct may be incinerated or
reclaimed.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
fraction by wt: 100%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192
Ld50 lc50 mixture: tdlo ipr-mouse: 14 gm/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: inhalation of vapor or mists can cause
aspiration pneumonia.
explanation of carcinogenicity: irac "3". Mineral oils are suspected
carcinogens of the skin and scrotum, larynx, lung and alimentary
tracts.
effects of overexposure: may cause eye, skin & respiratory tract
irritation.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
melt/freeze pt: m.P/f.P text: low temp
spec gravity: 0.84
viscosity: 97-107@100f
solubility in water: negligible
appearance and odor: colorless, oily liquid, practically odorless
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide and other unidentified
hydrocarbons from combustion.
Waste disposal methods: discard any product (including any retained
materials of use), disposable container or liner in an
environmentally acceptable manner, in full compliance with local,
state and federal regulations. Prod uct may be incinerated or
reclaimed.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
fraction by wt: 100%
other rec limits: none specified
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: low health hazards; irritation of
eyes, skin, respiratory or g,i.Tract;redness or burns of eyes are
possible.
explanation of carcinogenicity: data per mgf msds.
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: pre-existing conditions may be
worsen.
First aid: eyes and skin: flush with large amount of water for about
15-20 minutes;seek medical attention immediately.Inhalation: remove
to fresh air;call a physician.Ingestion: seek medical attention
immediately.
Hcc: v6
melt/freeze pt: m.P/f.P text: 110f,43c
spec gravity: 0.815-0.880
solubility in water: nil
appearance and odor: semi solid,oil like opaque yellow to brown
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: not specified
Waste disposal methods: consult local authorities;disposal must be in
accordance with local,state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: grease, petroleum
cas: 8009-03-8
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause skin and eye irrittion with
prolonged contact.
effects of overexposure: skin and eye irritation.
medical cond aggravated by exposure: may aggravate pre-existing skin and
eye disorders.
First aid: eyes- flush with plenty of water for at least 15 minutes,
call a doctor. skin- wash with soap and water. ingestion- call a
physician immediately.
Hcc: v6
boiling pt: b.P. Text: 400f,204c
spec gravity: 0.87
solubility in water: negligible
appearance and odor: amber liquid with mineral oil odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents such as hydrogen peroxide, chromic acid,
bromine, etc.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon dioxide, carbon monoxide.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil
cas: 8012-95-1
rtecs #: py8030000
fraction by wt: 100%
other rec limits: none recommended
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3 (mist); 9394