Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Aircraft Piston Engine Lubricating Oil

NSN: 9150-00-412-2065 | Model: MHS-24

A petroleum oil prepared principally for lubrication in piston type aircraft engines.

NSN Properties and Flags
NATO Stock Number
9150-00-412-2065
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Any acceptable
Minimum Viscosity Index
85.0
Service Characteristics
Corrosion resistive and oxidation resistant
Quantity Within Each Unit Package
1.000 quarts
Viscosity At Rated Temp
14.24 210 degrees fahrenheit and 14.48 210 degrees fahrenheit
Maximum Pour Point
0.0 degrees fahrenheit
Minimum Flash Point And Test Method
450.0 degrees fahrenheit cleveland open cup
Specification Data
14351-mhs-24 manufacturers specification
Nondefinitive Specification/std Data
40 type and i class

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-412-2065 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • MHS-24
Cage Codes:
  • L3 Technologies, Inc. (CAGE 02978)
Schedule B & Trade:
  • Schedule B: 2710193010 (NAICS 324110)

    Aviation engine lubricating oils (except jet engine lubricating oils)

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps sub2

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    R - 65.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    Y
  • Quantity per pack
    No qup
  • Unit of Measure
    Qt
  • Shelf Life
    N/A
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $65.33 to $108.88..
Does NSN 9150-00-412-2065 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, and Department Of The Air Force
What is the NIIN of NSN 9150-00-412-2065?
004122065 or 00-412-2065
Does NSN 9150-00-412-2065 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-412-2065?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
May 06, 1970
MSDS

Material Safety

MSDS BDYGY AEROSHELL OIL 80

Hazards

Ld50 lc50 mixture: oral ld50 (rat) is >5g/kg estimated
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: on rare occasions, prolonged and
repeated exposure to oil mist poses a risk of pulmonary disease
such as chronic lung inflammation. This condition is usually
asymptomatic as a result of repeated small aspirations. Shortness
of breath and cough are the most common symptoms. Aspiration may
lead to chemical pneumonitis.

explanation of carcinogenicity: iarc has determined there is sufficient
evidence for the carcinogenicity in experimental animals of used
oil.

effects of overexposure: generally considered minimally irritating to
the eyes and mildly irritationg to the skin. Prolonged and repeated
contact may result in various skin disorders such as dermatitis,
folliculitis or oil ac ne. Inhalation of vapor or oil mist maycause
mild upper respiratory tract irritation. Slightly toxic if
swallowed.

medical cond aggravated by exposure: preexisting skin and respiratory
disorders may be aggravated by exposure to this product.

First Aid

First aid: skin: remove contaminated clothing. Wash with soap and water.

get medical attention if irritation develops. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.

eye : immediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: may act as a
laxative. Do not induce vomiting. Relatively non-toxic unless
aspirated.

Chemical Properties

Hcc: v6
spec gravity: 0.8833
viscosity: 14.3 @210f
solubility in water: negligible
appearance and odor: amber colored oil, slight hydrocarbon odor
percent volatiles by volume: 0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide and other unidentified
organic compounds may be formed upon combustion.

Proper Disposal

Waste disposal methods: waste may be burned in an approved incinerator
or disposed of in accordance with all applicable local, state and
federal laws and regulations. Recycle if possible.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: solvent,dewaxed residual oil (petroleum)
cas: 64742-62-7
fraction by wt: 50%
other rec limits: none specified

ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 50%
other rec limits: none specified
acgih tlv: 5 mg/m3 (oil mist)

MSDS BSVPZ MOBIL AERO OIL 80

Hazards

Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: expected by mfr to be non-irritating.

is only expected to be slightly toxic by skin contact or ingestion.

no established inhalation toxicity.

explanation of carcinogenicity: the new product is non-carcinogenic.

used motor oil from gasoline engines shows carcinogenicity. See
supplemental data
effects of overexposure: causes skin irritation. Wash thoroughly after
handling. Ingestion: slightly toxic. Eyes: may cause irritation on
contact. Hmis: inhalation of mist may cause edema and coughing.

medical cond aggravated by exposure: no information given on msds by
mfr.

First Aid

First aid: if irritation persists or is severe, see a doctor. eye: flush
w/water 15 min, hold lids open. Skin: wash with soap & water. Remove
contaminated clothing and launder before reuse. Inhaled: remove to
fres h air. Aid/restore breathing if necessary. Ingested: do not
induce vomiting. Give 2 large glasses of milk or water to dilute &
get immediate medical care. Nothing by mouth if unconscious.

Chemical Properties

Hcc: v6
nrc/state lic num: none
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.882
viscosity: 732 sus@100f
solubility in water: negligible
appearance and odor: brown liquid, mild odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extreme heat
hazardous decomposition products: carbon monoxide.

conditions to avoid polymerization: will not occur

Proper Disposal

Waste disposal methods: waste should be recycled or may be burned in an
enclosed controlled burner for its fuel value. Be sure to dispose
of i/a/w federal, state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
other rec limits: none recommended

ingred name: solvent dewaxed residual oil (petroleum) note: ingredients
1 & 2 combined are greater than 95% of the product.

cas: 64742-62-7
other rec limits: none recommended

ingred name: acrylate polymer
fraction by wt:
other rec limits: none recommended

MSDS CDKPV AEROSHELL OIL 80

Hazards

Ld50 lc50 mixture: oral ld50 (rat) is >5g/kg estimated
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: lubricating oils are no more than
minimally irritating to skin & eyes. Inhalation of vapors for
heated product or oil mist may cause upper respiratory tract
irritation. Ingestion is no more than minim ally toxic. Chronic:
prolonged/repeatedexposure may cause skin disorders such as
dermatitis, oil acne or folliculitis.

explanation of carcinogenicity: iarc has determined there is sufficient
evidence for the carcinogenicity in experimental animals of used
oil.

effects of overexposure: generally considered minimally irritating to
the eyes and mildly irritationg to the skin. Prolonged and repeated
contact may result in various skin disorders such as dermatitis,
folliculitis or oil ac ne. Inhalation of vapor or oil mist maycause
mild upper respiratory tract irritation. Slightly toxic if
swallowed.

medical cond aggravated by exposure: preexisting skin and respiratory
disorders may be aggravated by exposure to this product.

First Aid

First aid: skin: remove contaminated clothing. Wash with soap and water.

get medical attention if irritation develops. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.

eye : immediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: may act as a
laxative. Do not induce vomiting. Relatively non-toxic unless
aspirated.

Chemical Properties

Hcc: v6
melt/freeze pt: m.P/f.P text: -5f,-21c
vapor pres:
spec gravity: 0.8762
viscosity: 14.3 @210f
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: amber liquid, slight hydrocarbon odor.

Reactivity

Stability indicator/materials to avoid: yes
oxidizing materials.

stability condition to avoid: high heat, open flames and oxidizing
materials.

hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates and gases when material undergoes pyrolysis or
combustion.

Proper Disposal

Waste disposal methods: waste may be burned in an approved incinerator
or disposed of in accordance with all applicable local, state and
federal laws and regulations. Recycle if possible.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: mineral oil,hydrotreated (severe), petroleum distillate,
heavy paraffinic
cas: 64742-54-7
rtecs #: py8035501
fraction by wt: 50-60%
other rec limits: none recommended

ingred name: solvent refined hydrotreated residual oil
cas: 64742-57-0
fraction by wt: 40-50%
other rec limits: none recommended

ingred name: additives
fraction by wt:
other rec limits: none recommended