NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of aircraft components such as actuators, engine accessories, control bearings, landing gears, and wheel bearings. It does not include grease, aircraft and instrument and grease, instrument.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $375.23 to $625.39.. | |
| Does NSN 9150-00-419-0628 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, Department Of The Navy, Germany, and Greece | |
| What is the NIIN of NSN 9150-00-419-0628? | |
| 004190628 or 00-419-0628 | |
| Does NSN 9150-00-419-0628 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-419-0628? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Dec 02, 1970 | |
Effects of overexposure: none noted by mfr. Low toxicity & low hazard to
health.
First aid: eyes: -wash immediately with water for 15 minutes,skin: -rashes
may occur after prolong contact,keep clean & wash with soap &
water,if reqd seek medical advice. In case of ingestion, do not
induce vomit ing.Get medical advice.
Hcc: v6
boiling pt: b.P. Text: 600f/316c
evaporation rate & reference: 3.5% at 350f,22 hr
solubility in water: negligible
appearance and odor: black grease, melting point 510f.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: none
hazardous decomposition products: none noted,but expect co, co*2, h*2o.
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 22%.
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
Effects of overexposure: may irritate eyes and skin on prolonged skin
contact.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
boiling pt: b.P. Text: >500f/260c
spec gravity: 0.9
evaporation rate & reference: negligible
solubility in water: negligible
appearance and odor: tan color grease.
Stability indicator/materials to avoid: yes
oxidizing agent
stability condition to avoid: heat and open flames
hazardous decomposition products: on burning;co and co*2.
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic grease
fraction by wt: >99%
acgih tlv: not specified
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute & chornic: none. Prolonged and
repeated skin contact may cause skin irritation.
explanation of carcinogenicity: per msds not listed in ntp, iarc, osha
as chemical listed as carcinogen or potential carcinogen.
effects of overexposure: prolonged and repeated skin contact may cause
skin irritation.
medical cond aggravated by exposure: none known.
First aid: skin: wipe off w/towel. Wash thoroughly with soap & water. Iff
irritated consult physician. Eye: flush w/water and consult
physician. Ingest: consult physician. Inhal: unlikely. However remove
to fresh ai r.
Hcc: v6
boiling pt: b.P. Text: >450f,>232c
melt/freeze pt: m.P/f.P text: >500f,>260c
spec gravity: 0.9
solubility in water: insoluble.
appearance and odor: black.
Stability indicator/materials to avoid: yes
none known.
stability condition to avoid: none known.
hazardous decomposition products: none known.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polyalphaolefin
fraction by wt:
other rec limits: none recommended
ingred name: synthetic ester
fraction by wt:
other rec limits: none recommended
ingred name: molybdium disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt:
other rec limits: none recommended
ingred name: clay
fraction by wt:
other rec limits: none recommended
ingred name: ptfe
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute & chronic: none. Prolonged and
repeated skin contact may cause skin irritation.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: prolonged and repeated skin contact may cause
skin irritation.
medical cond aggravated by exposure: none known medical condition may be
aggravated by exposure.
First aid: skin-wipe off & wash with soap & water. Inahled-remove to
fresh air, if necessary seek medical attention. Eyes-flush with
water. Get medical attention. Ingestion-give milk or water; do not
induce vomi ting. Consult physician.
Hcc: v6
melt/freeze pt: >260.C, 500.F
vapor pres: 1mm @ 20c
spec gravity: 0.9
solubility in water: negligible
appearance and odor: black, grease,slight peteroleum odor.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: strong oxidizers, temperatures above 500
f.
hazardous decomposition products: fluorine products, silicon dioxide,
carbon dioxide (co2) traces of incompletely burned carbon.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
Ingred name: non-hazardous ingredients