NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of aircraft components such as actuators, engine accessories, control bearings, landing gears, and wheel bearings. It does not include grease, aircraft and instrument and grease, instrument.
The last inventory check on this NSN was done on 03/26/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $35.76 to $59.60.. | |
| Does NSN 9150-00-478-0055 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Bulgaria, Brazil, Spain, Republic Of Korea, Italy, and Greece | |
| What is the NIIN of NSN 9150-00-478-0055? | |
| 004780055 or 00-478-0055 | |
| Does NSN 9150-00-478-0055 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-478-0055? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| May 18, 1970 | |
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating.
skin contact: prolonged or repeated contact may cause dermatitis,
folliculitis or oil acne. Release during high pressure may result
in injection into the skin caus ing local necrosis. Inhalation: not
a relevant route. However, may irritate.Ingestion: low order of
acute oral toxicity.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eyes: flush with water for 15 min. While holding eyelids.
skin: wash with soap and water. Inhalation: remove victim to fresh
air and provide oxygen if breathing is difficult. Get medical
attention. Inges tion: do not induce vomiting. Get medical advise.
Hcc: v6
melt/freeze pt: m.P/f.P text: 284f,140c
decomp temp: decomp text: >300f,>149c
spec gravity: 7.3
evaporation rate & reference: unknown(butyl acetate=1)
solubility in water: negligible
appearance and odor: smooth tan grease, slight odor
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, open flames
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydrotreated middle petroleum distillate
cas: 64742-46-7
rtecs #: jn9379645
fraction by wt: 20-30%
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist
ingred name: mineral oil
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 20-30%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: distillates, solvent-dewaxed light paraffinic
cas: 64742-56-9
rtecs #: py8039500
fraction by wt: 35-40%
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist
ingred name: calcium hydroxystearate
cas: 3159-62-4
fraction by wt: 10-12%
other rec limits: none recommended
ingred name: other components
fraction by wt:
other rec limits: none recommended
Effects of overexposure: poss skin/eye irrit w/prolonged cntct
First aid: remove to fresh air. Give cpr/oxygen if need. Skin: wash with
soap & water. Eyes: flush with water 15 min. Keep warm and quiet.
get medical attention immediately.
Hcc: v6
boiling pt: b.P. Text: 280f/138c
spec gravity: 0.90
evaporation rate & reference: not determined
solubility in water: negligible
appearance and odor: amber semi-solid w/usual petroleum oil odor
Stability indicator/materials to avoid: yes
strong oxidizing agts: chromic acd; hydrogen peroxide, br
stability condition to avoid: none
hazardous decomposition products: dense smoke, carbon monoxide, dioxide,
other unkwn org cmpd
Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydrocarbon
fraction by wt:
ingred name: 4,4'-methylenebis(n,n-dimethyl)benzenamine (sara iii)
cas: 101-61-1
rtecs #: by5250000
fraction by wt: 0.35%
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may be mildly irritating.
skin: prolonged or repeated contact may cause various skin disorders
such as dermatitis, folloculitis oil acne. Release during high
pressure usage may result in injection of oil into skin causing
local necrosis. Ingestion: low order of acute oral toxicity.
effects of overexposure: irritation as noted in the health hazard
section. Local necrosis is evidenced by delayed onset of pain and
tissue damage a few hours following injection.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: eyes: flush with water for at least 15 min. While holding
eyelids open. Skin: remove comtaminated clothing and wipe excess
off. Wash with soap and water or a waterless hand cleaner followed
by soap and water. Inhalation: remove victim to fresh air and
provide oxygen if breathing difficult. Ingestion: do not induce
vomiting. In general, no treatment is necessary unless large
quantities are injected.
Hcc: v6
spec gravity: 7.3 ppg
solubility in water: negligible
appearance and odor: tan, smooth, slight odor.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: avoid heat and open flames.
hazardous decomposition products: none specified by manufacturer.
Waste disposal methods: none specified by manufacturer.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydrotreated middle petroleum distillate
cas: 64742-46-7
rtecs #: jn9379645
fraction by wt: 20-30%
other rec limits: none specified
ingred name: mineral oil, petroleum distillates, hydrotreated light
naphthenic
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 20-30%
other rec limits: none specified
acgih tlv: 5 mg/m3 (oil mist)
ingred name: solvent refined, hydrotreated light paraffinic distillate
cas: 64742-55-8
rtecs #: py8036500
fraction by wt: 35-40%
other rec limits: none specified
ingred name: calcium hydroxystearate
cas: 3159-62-4
fraction by wt: 10-12%
other rec limits: none specified
ingred name: other components, mixture
rtecs #: 9999999zz
fraction by wt:
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- eye: may be mildly irritating.
skin: release during high pressure usage may result in injection of
oil into the skin causing local necrosis. Inhalation: mists/vapors
may cause respiratory tract i rritation. Ingestion: may be harmful
ifingested. Chronic- skin disorders.
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: get medical help if symptoms persist. Inhaled: remove to
fresh air. Provide oxygen/cpr if needed. eye: flush with water for
15 minutes while holding eyelids open. Skin: wash with soap &
water. Ingest ion: do not induce vomiting. See a physician.
Hcc: v6
solubility in water: negligible
appearance and odor: amber colored grease
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) may evolve when this material undergoes
combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: "not hazardous"
fraction by wt: 100%
other rec limits: none specified
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating.
skin contact: prolonged or repeated contact may cause dermatitis,
folliculitis or oil acne. Release during high pressure may result
in injection into the skin caus ing local necrosis. Inhalation: not
a relevant route. However, may irritate.Ingestion: low order of
acute oral toxicity.
explanation of carcinogenicity: mfr listed no information about the
carcinogenicity of this material. Hmis does not expect it to be
carcinogenic.
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: if irritation or symptoms persist or are severe, see a
doctor. eye: flush w/water 15 min, hold lids open. Skin: wash with
soap & water or waterless handcleaner. Remove contaminated
clothing and launde r before reuse. Inhaled: remove to freshair.
aid/restore breathing if necessary. Ingested: do not induce
vomiting. In general no treatment is necessary unless large
quantities are ingested. See sup dat
Hcc: v6
nrc/state lic num: none
melt/freeze pt: m.P/f.P text: 284f,140c
spec gravity: 7.3 lb/gal
solubility in water: negligible
appearance and odor: tan,smooth,slight odor.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flames.
hazardous decomposition products: products depend on combustion
conditions. Carbon monoxide & unidentified organic compounds may be
formed upon combustion
conditions to avoid polymerization: will not occur.
Waste disposal methods: no information given by mfr on msds.
hmis: dispose of in an appropriate disposal facility in compliance
with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydrotreated middle distillate (petroleum)
cas: 64742-46-7
rtecs #: jn9379645
fraction by wt: 20-30%
ingred name: mineral oil
cas: 64742-53-6
rtecs #: py8036000
fraction by wt: 20-30%
ingred name: solvent refined, hydrotreated light paraffinic distillate
cas: 64742-55-8
rtecs #: py8036500
fraction by wt: 35-40%
other rec limits: none specified
ingred name: calcium hydroxystearate
cas: 3159-62-4
fraction by wt: 10-12%
other rec limits: none specified
ingred name: other components (mixture)
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to eyes. Skin contact: prolonged or repeated contact may cause
various skin disorders such as dermatitis, folliculitis or oil
acne. Release during high pressure may result in injection into
the skin causing local necrosis. Inhalation: not a relevant route.
however, under high temperature conditions, vapor irritating to
nose, throat & upper respiratory tract. Inge stion: greases are
generally considered to have a low order of acute oral toxicity.
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eye-flush with water for 15 min while holding eye-lids open.
get medical aid. skin-remove contaminated clothes & wipe excess
off. Wash with soap & water or a waterless hand cleaner followed by
soap & water. Do not reuse clothing until cleaned. If irritation
persists, get medical aid if material is injected under the skin,
get medical aid promptly to prevent serious damage.
inhalation-remove victi m to fresh air & provide oxygen if
breathing is difficult. Get medical aid. Ingestion-do not induce
vomiting. In general, no treatment is necessary unless large
quantities of product are injected. How ever, get medical advice.
Hcc: v6
nrc/state lic num: none
melt/freeze pt: =140.C, 284.F
spec gravity: 7.3 lb/gal
solubility in water: negligible
appearance and odor: tan,smooth,slight odor.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flames.
hazardous decomposition products: products depend on combustion
conditions. Carbon monoxide & unidentified organic compounds may be
formed upon combustion
conditions to avoid polymerization: will not occur.
Waste disposal methods: no information given by mfr on msds.
hmis: dispose of in an appropriate disposal facility in compliance
with local regulations.
Ingred name: hydrotreated middle distillate (petroleum)
cas: 64742-46-7
rtecs #: jn9379645
minumum % wt: 20.
maxumum % wt: 30.
ingred name: solvent refined, hydrotreated light naphthenic distillate
cas: 64742-53-6
rtecs #: py8036000
minumum % wt: 20.
maxumum % wt: 30.
ingred name: solvent refined, hydrotreated light paraffinic distillate
cas: 64742-55-8
rtecs #: py8036500
minumum % wt: 35.
maxumum % wt: 40.
other rec limits: none specified
ingred name: other components (mixture)
< wt: 2.
other rec limits: none recommended
ingred name: calcium hydroxystearate
cas: 3159-62-4
minumum % wt: 10.
maxumum % wt: 12.
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to eyes. Skin contact: prolonged or repeated contact may cause
various skin disorders such as dermatitis, folliculitis or oil
acne. Release during high pressure may result in injection into
the skin causing local necrosis. Inhalation: not expected to be a
relevant route. However, under high temperature conditions, vapor
irritating to nose, throat & upper respirat ory tract may be
produced. Ingestion: greases are generally considered to have a low
order of acute oral toxicity.
explanation of carcinogenicity: this product & its components are not
classified as carcinogenic by iarc, ntp or osha.
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eye-flush with water for 15 min while holding eye-lids open.
get medical aid. skin-remove contaminated clothes & wipe excess
off. Wash with soap & water or a waterless hand cleaner followed by
soap & water. Do not reuse clothing until cleaned. If irritation
persists, get medical aid if material is injected under the skin,
get medical aid promptly to prevent serious damage.
inhalation-remove victi m to fresh air & provide oxygen if
breathing is difficult. Get medical aid. Ingestion-do not induce
vomiting. In general, no treatment is necessary unless large
quantities of product are injected. How ever, get medical advice.
Hcc: v6
nrc/state lic num: none
melt/freeze pt: =140.C, 284.F
spec gravity: 7.3 lb/gal
solubility in water: negligible
appearance and odor: tan,smooth,slight odor.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flames.
hazardous decomposition products: thermal decomposition products are
highly dependent on the combustion conditions. Carbon monoxide &
unidentified organic compounds may be formed upon combustion
conditions to avoid polymerization: will not occur.
Waste disposal methods: no information given by mfr on msds.
hmis: dispose of in an appropriate disposal facility in compliance
with local regulations.
Ingred name: hydrotreated middle distillate (petroleum)
cas: 64742-46-7
rtecs #: jn9379645
minumum % wt: 20.
maxumum % wt: 30.
ingred name: solvent refined, hydrotreated light naphthenic distillate
cas: 64742-53-6
rtecs #: py8036000
minumum % wt: 20.
maxumum % wt: 30.
ingred name: solvent refined, hydrotreated light paraffinic distillate
cas: 64742-56-9
rtecs #: py8039500
minumum % wt: 35.
maxumum % wt: 40.
other rec limits: none specified
ingred name: other components (mixture)
< wt: 2.
other rec limits: none recommended
ingred name: calcium hydroxystearate
cas: 3159-62-4
minumum % wt: 10.
maxumum % wt: 12.
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to the eyes. Skin contact: prolonged or repeated contact may cause
various skin disorders such as dermatitis, folliculitis or oil
acne. release during high pres sure usage may result in injection
of grease into the skin causing local necrosis. Inhalation: not
expected to be a relevant route of exposure; however, under high
temperature conditions, vapors irri tating to the nose, throat &
upper respiratory tract may be produced. Ingestion: greases are
generally considered to have a low order of acute oral toxicity.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by international agency for research on
cancer (iarc), national toxicology program (ntp) or occupational
safety and health administrat ion (osha).
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eye-flush with water for 15 min while holding eye-lids open.
get medical aid. skin-remove contaminated clothes & wipe excess
off. Wash with soap & water or a waterless hand cleaner followed by
soap & water. Do not reuse clothing until cleaned. If irritation
persists, get medical aid if material is injected under the skin,
get medical aid promptly to prevent serious damage.
inhalation-remove victi m to fresh air & provide oxygen if
breathing is difficult. Get medical aid. Ingestion-do not induce
vomiting. In general, no treatment is necessary unless large
quantities of product are injected. How ever, get medical advice.
Hcc: v6
nrc/state lic num: none
melt/freeze pt: =140.C, 284.F
spec gravity: 7.3 lb/gal
solubility in water: negligible
appearance and odor: tan,smooth,slight odor.
Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flames.
hazardous decomposition products: thermal decomposition products are
highly dependent on the combustion conditions. Carbon monoxide &
unidentified organic compounds may be formed upon combustion
conditions to avoid polymerization: will not occur.
Waste disposal methods: if this product becomes a waste, it would not be
a hazardous waste by rcra criteria (40 cfr 261). place in an
appropriate disposal facility in compliance with local regulations.
= wt: 100.
ingred name: solvent refined, hydrotreated middle distillate
cas: 64742-46-7
rtecs #: jn9379645
minumum % wt: 20.
maxumum % wt: 30.
ingred name: solvent refined, hydrotreated light naphthenic distillate
cas: 64742-53-6
rtecs #: py8036000
minumum % wt: 20.
maxumum % wt: 30.
ingred name: solvent refined, hydrotreated light paraffinic distillate
cas: 64742-56-9
rtecs #: py8039500
minumum % wt: 35.
maxumum % wt: 40.
ingred name: calcium hydroxystearate
cas: 3159-62-4
minumum % wt: 10.
maxumum % wt: 12.
ingred name: other components
< wt: 2.