Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Damping Fluid

NSN: 9150-00-480-7869 | Model: 210H

A fluid designed to reduce the amplitude of motion in order to obtain stable readings on indicators.

NSN Properties and Flags
NATO Stock Number
9150-00-480-7869
DEMIL
NO
Basic Ingredient
Silicone
Quantity Within Each Unit Package
1.000 gallons
Viscosity At Rated Temp
100.00 77 degrees fahrenheit
Minimum Flash Point And Test Method
600.0 degrees fahrenheit cleveland open cup
Special Features
Shear resistant and oxidation inhibited
Specification Data
81348-vv-d-1078 government specification

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-480-7869 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • 210H
  • 210H, 100CS, 1GAL
Cage Codes:
  • Dow Corning Corporation (CAGE 71984)
Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps sub2

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    R - 65.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    No qup
  • Unit of Measure
    Gl
  • Shelf Life
    N/A
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $1,901.84 to $3,169.73..
Does NSN 9150-00-480-7869 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, U.s. Marine Corps, Department Of The Navy, Spain, and Republic Of Korea
What is the NIIN of NSN 9150-00-480-7869?
004807869 or 00-480-7869
Does NSN 9150-00-480-7869 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-480-7869?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Sep 16, 1970
MSDS

Material Safety

MSDS BDZWP 21 OH FLUID,100 CS

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is not known.

routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes. Acute- eyes: may
cause discomfort. Skin: no known adverse effect. Inhale: no
irritation to eyes and respiratory passages. Oral: small amounts
transferred to the mouth by fingers should not injure. Swallowing
large amounts may cause digestive discomfort. Chronic- unknown.

explanation of carcinogenicity: none
effects of overexposure: irritation, discomfort, tearing, dryness of
eyes
medical cond aggravated by exposure: may enhance allergic conditions.

First Aid

First aid: call physician if symptoms persist. Eye: immediately flush
with water for 15 minutes. Hold eyelids open. Skin: wipe off excess
with cloth. Wash skin with soap & water. Inhaled/oral: no first aid
should b e needed.

Chemical Properties

Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.97
evaporation rate & reference: not relevant
solubility in water:
appearance and odor: reddish brown liquid - very little odor
percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none
hazardous decomposition products: carbon monoxide, carbon dioxide,
silicon dioxide, metal oxides and formaldehyde

Proper Disposal

Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: poly (dimethylsiloxane)
cas: 63148-62-9
rtecs #: jj6484500
other rec limits: none recommended

MSDS BJYXH ACCUMETRIC 210H FLUID

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes/skin: prolonged contact can cause
slight irritation. General: low toxicity level on contact or
ingestion.

explanation of carcinogenicity: none of the chemicals in this product is
listed by iarc, ntp or osha as a carcinogen.

effects of overexposure: irritation of eyes/skin/respiratory tract.

medical cond aggravated by exposure: persons with a history of skin and
respiratory disorders may be at increased risk from exposure.

First Aid

First aid: eye: immediately flush with plenty of water for 15 minutes.

get medical attention. Skin: wash with soap and water. Inhalation:
remove to fresh air. Ingestion: manufacturer reports that no first
air sh ould be needed for small oral amounts accidentally ingested.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >600f,>316c
vapor pres:
spec gravity: 0.97
evaporation rate & reference:
solubility in water: negligible
appearance and odor: very little odor,liquid clear to slightly hazy
percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon dioxide, carbon monoxide, and
oxides of silicon.

Proper Disposal

Waste disposal methods: dispose of in accordance with all applicable
federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: silicone fluid
other rec limits: none specified

MSDS BQDKR FLUID 210 H,100 CS

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is unknown.

routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes. Acute- eye: may
cause discomfort. Skin: a single prolonged exposure causes no known
adverse effect. Inhale: no irritation to respiratory tract.

oral: small amounts transferred to mouth by fingers should not
injure. Swallowing large amounts may cause digestive discomfort.

chronic- unknown.

explanation of carcinogenicity: none
effects of overexposure: discomfort, nausea, redness, dryness

First Aid

First aid: call a doctor if symptoms occur. Eye: flush immediately with
water. Hold eyelids open. Skin: wipe excess off. Flush skin with
water. Inhaled: no first aid should be needed. Oral: no first aid
should be ne eded. Note to physician: treat symptomatically.

Chemical Properties

Hcc: v6
nrc/state lic num: not relevant
spec gravity: 0.97
viscosity: 100 cst
appearance and odor: brown liquid - some odor

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents
stability condition to avoid: none
hazardous decomposition products: may produce smoke, carbon monoxide,
carbon dioxide, metal oxides, silicon dioxide, formaldehyde.

Proper Disposal

Waste disposal methods: dispose of waste in compliance with applicable
local, state and federal laws and regulations. Incineration is
recommended.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: non-hazardous ingredients (iron siloxane complex)
fraction by wt: 100%
other rec limits: none recommended

MSDS CKGSN 210H FLUID, 100 CS

Hazards

Ld50 lc50 mixture: not provided
health hazards acute and chronic: eyes: direct contact may cause
temporary redness & discomfort. Skin: no significant irritation
expected from a single short-term exposure. Inhalation: no
significant effects expected from a single sho rt-term exposure.

oral: low ingestion hazard in normal use. No known applicable
information on prolonged/repeated exposure effects on skin,
inhalation or ingestion.

explanation of carcinogenicity: not provided
effects of overexposure: see health effects acute and chronic
medical cond aggravated by exposure: no known applicable information

First Aid

First aid: eyes: immediately flush with water. Skin: no first aid should
be needed. Inhalation: no first aid should be needed. Oral: no
first aid should be needed. Treat symptomatically.

Chemical Properties

Hcc: v5
boiling pt: >35.C, 95.F
melt/freeze pt: m.P/f.P text: not determined
vapor pres: not determined
vapor density: not determ
spec gravity: 0.97
ph: not determined
viscosity: 100 cst
solubility in water: not determined
appearance and odor: brown liquid, some odor
percent volatiles by volume: not determin

Reactivity

Stability indicator/materials to avoid: yes
oxidizing materials can cause a reaction
hazardous decomposition products: not provided

Proper Disposal

Waste disposal methods: local, state & federal laws and regulations may
apply to releases and disposal of this material, as well as those
materials and items used in the cleanup of releases.

Ingredients List

Ingred name: iron siloxane complex
> wt: 60.