Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Wire Rope-exposed Gear Grease

NSN: 9150-00-530-6814 | Model: MIL-PRF-18458

A grease specifically intended for the lubrication of exposed gears and wire rope of hoists, winches, cranes, shovels, dredges, and other similar equipment.

NSN Properties and Flags
NATO Stock Number
9150-00-530-6814
DEMIL
NO
Basic Ingredient
Any acceptable
Service Characteristics
Corrosion resistive and low evaporation and salt water resistant
Quantity Within Each Unit Package
35.000 pounds
Minimum Dropping Point
150.0 degrees fahrenheit

Inventory Check

The last inventory check on this NSN was done on 05/08/2024. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 1

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-530-6814 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • MIL-PRF-18458
  • ALCO-METALUBE HEAVY DUTY LUBRICA
  • SA8277092
  • FLUID FILM WRO-EP
  • 91801379
  • MIL-G-18458
  • 9150PL0024912
  • FLUID FILM WRO-EP
  • 10377988
Cage Codes:
  • Military Specifications (CAGE 81349)
  • Metalube, Co., L.l.c. Alco (CAGE 58100)
  • Exxon Mobil Corporation (CAGE 29700)
  • Eureka Chemical Company (CAGE 4E827)
  • Thales Sa (CAGE F6481)
  • Inspektorat Wsparcia Sil Zbrojnych (CAGE 9009H)
  • Karkitarvike Oy (CAGE A721G)
  • Nimikkeistokeskus Ncb Finland (CAGE A486G)
Replacements:
  • 9150-00-530-6814 replaces 9150-00-530-6813
Schedule B & Trade:
  • Schedule B: 2710193750 (NAICS 324110)

    Lubricating greases with or w/out additives

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps sub2

  • WCC:

    604 - Petroleum, lubricating grease (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    R - 65.0

  • ADC:

    Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    1
  • Unit of Measure
    Cn
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $431.08 to $718.47..
Does NSN 9150-00-530-6814 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Bonneville Power Administration, National Aeronautics and Space Administration, National Aeronautics and Space Administration, Oman, Finland, Poland, Brazil, Spain, Singapore, Australia, Belgium, New Zealand, France, Germany, Republic Of Korea, United Kingdom, Philippines, Netherlands, Italy, Denmark, Norway, Greece, and Turkey
What is the NIIN of NSN 9150-00-530-6814?
005306814 or 00-530-6814
Does NSN 9150-00-530-6814 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-530-6814?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 01, 1963
MSDS

Material Safety

MSDS BFDDF SA 827 7092 GREASE

Hazards

Effects of overexposure: eyes: may cause irrit on contct;skin: prolongd
contct may irritat;ingest: hamful-lead poisong;inh: n/k.

First Aid

First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >410f/>210c
spec gravity: 0.936
solubility in water: negligible
appearance and odor: off white semi-solid with mineral oil odor
percent volatiles by volume: unk

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents;e.G.,hcro*4,h*2o2,br*2
hazardous decomposition products: co,co*2,possibly other

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum oil
acgih tlv: 5mg/cum(mist)

ingred name: lead (sara iii)
cas: 7439-92-1
rtecs #: of7525000
fraction by wt: 0.35%
osha pel: 0.05 mg/m3;1910.1025
acgih tlv: 0.15 mg/m3;dust 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb

ingred name: thickening agents (type not known)

MSDS BFDDG SA 827 5189;LEAD-COTE

Hazards

Routes of entry: inhalation: yes skin: unknown ingestion: yes
health hazards acute and chronic: chronic: when lead ingested exceeds the
human body's ability to eliminate it(1 mg/day),symptoms &
disability of accumu.Can occur.Excessive exposure affects
blood,nervous,digestive system;synthesis of h emoglobin is
inhibited & will result inanemia.If left untreated,neuromuscular
dysfunction,paralysis & encephalopathy.

effects of overexposure: lead intoxication symptoms: constipation,sleep
disturbance,fatigue,headache,loss of appetite; inhalation of
dust: colic,anemia,vomiting & neuritis,intense periodic
cramps,aching bones & muscles,uncoordi nated body movements;worse
situation could result in convulsions,stupor,coma & encephalopathy.

First Aid

First aid: eye: flush with large quantities of water for at least 15min;
skin: remove excess with cloth or paper.Wash thoroughly with soap &
water; inhal: remove to fresh air; ing: call a physician
immediately,induc e vomiting if victim is conscious.Nevergive
anything by mouth to an unconscious person.

Chemical Properties

Hcc: v6
spec gravity: 1.212
viscosity:
solubility in water: negligible
appearance and odor: black grease;semi-solid,mineral oil smell

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agent
stability condition to avoid: heat,open flame
hazardous decomposition products: co,co*2

Proper Disposal

Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum hydrocarbon(with additives)
acgih tlv: 5 mg/cum(oil mist)

ingred name: lead (sara iii)
cas: 7439-92-1
rtecs #: of7525000
osha pel: 0.05 mg/m3;1910.1025
acgih tlv: 0.15 mg/m3;dust 9192
epa rpt qty: 1 lb
dot rpt qty: 1 lb

MSDS BJMDH FLUID FILM,GEL WRO-EP

Hazards

Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye/skin: minimally
irritating.Inhalation/ingestion: unknown.Chronic: none specified by
manufacturer.

explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.

effects of overexposure: may cause eye or skin irritation.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: inhalation/ingestion: none specified by manufacturer.Get
medical attention.Eye: flush with water for 15 minutes while holding
eyelids open.Get medical attention if irritation or redness
develops.Skin: do not use gasolines,thinners or solventsto remove
product from skin.Wipe material from skin and remove contaminated
clothing.Wash with soap & water/waterless cleanser.If
irritation/redness,see doctor.

Chemical Properties

Hcc: v6
vapor pres: 8.7
spec gravity: 0.90
evaporation rate & reference: negligible
appearance and odor: dark gray, mild piney odor
percent volatiles by volume: 1.0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents such as chlorine, bromine, hydrogen peroxide,
nitric acid
stability condition to avoid: avoid skin or eye contact. Avoid high
temperatures and open flames.

hazardous decomposition products: dense smoke, co2, co, oxides of sulfur
and lead

Proper Disposal

Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with federal, state, and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lead diamyldithiocarbamate
cas: 36501-84-5
fraction by wt: 1.6%
other rec limits: none specified

ingred name: "not hazardous"
fraction by wt: 98.4%
other rec limits: none specified

MSDS BPBMS SA 827 7092 GREASE

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: chronic: none when used with good
personal hygiene practices. May otherwise cause skin and eye
irritation upon prolonged or repeated contact. Acute: no data
avaliable.

effects of overexposure: none specified by manufacturer.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: immediately flush with large amounts of water for at
least 15 min & call a physician. skin: remove excess with cloth or
paper & wash area thoroughly with soap & water. For high pressure
injecti on under the skin see a physician immediately. Inhalation:
remove exposed person to fresh air is experienced while handling
hot product. If swallowed: contact a physician immediately.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >410f,>210c
spec gravity: 0.936
evaporation rate & reference: n/rnown
solubility in water: negligible @25c
appearance and odor: form: semi-solid. Odor: mineral oil. Color: amber.

apperance: grease.

percent volatiles by volume: unk

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers such as hydrogen peroxide, bromine, and chromic acid.

hazardous decomposition products: carbon monoxide; carbon dioxide;
oxides of sulfur, nitrogen, calcium; alkyl sulphides; mercaptans;
hydrogen sulfide.

Proper Disposal

Waste disposal methods: dispose of in accordance with all applicable
federal, state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: nonhazardous ingredients
fraction by wt: 100%
other rec limits: none specified

MSDS CBQKG FLUID FILM GEL WRO-EP

Hazards

Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: possible skin irritation.

explanation of carcinogenicity: there are no ingredients above 0.1%
which are identified as carcinogens by ntp,iarc or osha.

effects of overexposure: skin: redness.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: skin: remove contaminated clothing;wipe off;wash with soap and
water or waterless cleaner.Do not apply solvents.Eyes: flush with
water for 15 minutes.Get medical attention.Inhal/ingest: unlikely to
be ne eded.Obtain medical assistance if needed.

Chemical Properties

Hcc: v6
vapor pres: 8.7
spec gravity: 0.935
evaporation rate & reference: negligible
appearance and odor: dark gray gel,mild piney odor.

percent volatiles by volume: 1

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents(chlorine,bromine,hydrogen peroxide,nitric
acid).

stability condition to avoid: high heat(may cause decomposition).

hazardous decomposition products: none specified by manufacturer.

Proper Disposal

Waste disposal methods: dispose of in accordance with federal,state and
local regulations.

Ingredients List

Ingred name: lead diamyldithiocarbamate
cas: 36501-84-5
fraction by wt: 1.6%
other rec limits: none recommended
osha pel: rule in process
acgih tlv: 0.15 mg pb/m3

MSDS CGLSB LITHIUM (7092),86470

Hazards

Ld50 lc50 mixture: ld50 (oral, rat) is >5000 mg/kg.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- eye contact may cause irritation. Prolonged or
repeated skin contact may cause irritation and inflammation.

inhalation of oil mists may cause mild irritation of upper
respiratory tract. Low order of oral toxicity; but aspiration
hazard. Chronic- skin dermatitis.

explanation of carcinogenicity: none
effects of overexposure: none when used with good personal hygiene
practices. May otherwise cause skin & eye irritation upon prolonged

First Aid

First aid: call physician if symptoms persist. Eye: flush with water for
15 minutes. Hold eyelids open. Skin: remove contaminated clothing.

was contaminated clothing before reuse. Wipe excess off. Wash skin
with soap & water. If material is injected under skin, regardless
of appearance/size, get medical attention promptly. Do not wait for
symptoms to develop. Inhaled: move to fresh air. Provide cpr/oxygen
if n eeded. Oral: do not induce vomiting. Call physician
immediately.

Chemical Properties

Hcc: v6
nrc/state lic num: not relevant
spec gravity: 0.936
viscosity: >100sus @100f
solubility in water: negligible
appearance and odor: amber grease - mineral oil odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents such as liquid chlorine, concentrated oxygen,
sodium hypochlorite or calcium hypochlorite
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of phosphorus, sulfur and nitrogen, zinc oxide, hydrogen
sulfide, mercaptans, sulfur dioxide, hydrogrn sulfide oxides of
calcuim, alkyl sulphides.

Proper Disposal

Waste disposal methods: assure conformity with applicable governmental
regulations.

Ingredients List

Ingred name: mineral oil, petroleum distillate, solvent refined
(severe), heavy naphthenic, (non-carcinogenic - iarc)
cas: 64741-96-4
rtecs #: py8040001
< wt: 83.

other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist

ingred name: mineral oil,hydrotreated (severe), heavy naphthenic
distillate
cas: 64742-52-5
rtecs #: py8035001
= wt: 83.

other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist

ingred name: lithium complex soap thickener
< wt: 6.

other rec limits: none recommended

ingred name: proprietary additives
= wt: 15.

other rec limits: none recommended

MSDS CHKXG FLUID FILM, GEL WRO-EP

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: minimally irritating. skin:
minimally irritating.

First Aid

First aid: eyes: flush thoroughly with potable water for a minimum of 15
minutes and seek prompt medical attention. Skin: wipe excess
material from the skin with a cloth, followed by washing with soap
and water . Do not use solvents, thinners or gasoline for this
purpose. A waterless skin cleanser is beneficial in removing the
material from the skin.

Chemical Properties

Hcc: v6
vapor pres: 8.7
spec gravity: 0.935
evaporation rate & reference: negligible
appearance and odor: dark gray gel; mild piney odor.

percent volatiles by volume: 1.0

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: extended exposure to high temperatures may
cause decompositioin.

hazardous decomposition products: dense smoke, carbon dioxide, carbon
monoxide, oxides of sulfur, and lead sulfide

Proper Disposal

Waste disposal methods: dispose as solid waste in accordance with local,
state, and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lead (sara 313) (cercla)
cas: 7439-92-1
rtecs #: of7525000
fraction by wt: 0.45%
other rec limits: none recommended
osha pel: see 1910.1025
acgih tlv: 0.05mg/m3, a3; 9596
epa rpt qty: 1 lb
dot rpt qty: 1 lb

MSDS CJNVD FLUID FILM GEL WRO-EP

Hazards


ld50 lc50 mixture: no data available
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: eye contact-may cause mild irritation. Skin
contact-prolonged contact could cause irritation. Inhalation-significant
levels of vapor not likely to occur in normal use. Ingestion-no information
availab le.

explanation of carcinogenicity: contains no solvents or known carcinogens.

first aid: eye-flush with plenty of water for at least 15 min. If irritation
persists, obtain medical attention. Skin-wipe excess material from skin with
a cloth, followed by washing with soap and water. A water less skin cleanser
is beneficial in removing the material from the skin. Inhalation-if
respiratory symptoms develop, move victim away from source of exposure and
into fresh air. If symptoms persists, seek emdical attention. Ingestion-if
symptoms develop, seek medical attention.

Chemical Properties


hcc: n1
b.P. Text: n/d
m.P/f.P text: n/d
vapor pres: n/d
spec gravity: 25 c: 0.933
ph: 7.3
solubility in water: not soluble
appearance and odor: green, black gel. Mild piney ordor.

HAZCOM Label


product id: fluid film gel wro-ep
cage: 4e827
company name: eureka chemical co
street: 234 lawrence ave
po box: 2205
city: south san francisco ca
zipcode: 94080
health emergency phone: (800)424-9300
label required ind: y
date of label review: 10/04/1999
status code: a
year procured: 1999
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: no
health hazard: slight
contact hazard: slight
fire hazard: slight

Transportation

=======================================================
responsible party cage: 4e827
trans id no: 149000
product id: fluid film gel wro-ep
review date: 10/04/1999
mfn: 1
net unit weight: 35 lbs
multiple kit number: 0
unit of issue: cn
container qty: 1
type of container: can

Reactivity

Hazard and precautions: eye contact-may cause mild irritation. Skin
contact-prolonged contact could cause irritation. Inhalation-significant
levels of vapor not likely to occur in normal use. Ingestion-no information
availab le.

Proper Disposal


spill release procedures: do not allow product to enter drains or water
courses. Transfer bulk of material into another container. Absorb remaining
residue with proper absorbents such as earth or vermiculite. Swepp up and
disp ose of as solid waste in accordance with applicable regulations.

waste disposal methods: product should be disposed of via authorized waste
disposal contractors in accordance with all local and national regulations.

handling and storage precautions: storage temperature: 0-49c. Storage
precautions: no special requirements. Keep in closed containers. Handling:
avoid contact with skin and eyes. Observe good standards of industrial
hygiene.

other precautions: do not mix with other chemicals

MSDS CKPYB WIRE ROPE COMPOUND (489315)

Hazards


ld50 lc50 mixture: acute oral ld50 (rat) > 5 g/kg
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: health studies have shown that many petroleum hydrocarbons
and synthetic lubricants pose potential human health risks which may vary
from person-to-person. As a precaution, exposure to liquids, vapors , mists

Chemical Properties


hcc: v6
b.P. Text: not available
spec gravity: .936
viscosity: >100 sus@100f
solubility in water: negligible
appearance and odor: amber grease. Mineral oil odor.

HAZCOM Label


product id: wire rope compound (489315)
cage: 0st34
company name: rtk industries inc
street: 605 7th ave n
city: safety harbor fl
zipcode: 34695
health emergency phone: 800-443-9966
label required ind: y
date of label review: 07/06/2000
status code: a
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: yes
health hazard: slight
contact hazard: slight
fire hazard: slight

Transportation

=======================================================
responsible party cage: 0st34
trans id no: 153905
product id: wire rope compound (489315)
msds prepared date: 03/22/1999
review date: 07/06/2000
mfn: 1
multiple kit number: 0
unit of issue: cn
container qty: 1
type of container: can

Reactivity

Hazard and precautions: target organs: n/p. health studies have shown that
many petroleum hydrocarbons and synthetic lubricants pose potential human
health risks which may vary from person-to-person. As a precaution, exposu re

Proper Disposal


spill release procedures: recover free prduct. Add sand, earth, or other
suitable absorbent to spill area. Minimize skin contact. Keep product out of
sewers and watercourses by diking or impounding. Advise authorities if produ
ct has entered or may enter sewers, watercourses, or extensive land areas.

assure conformity with applicable governmental regulations.

waste disposal methods: options for disposal of this product may depend on the
conditions under which it was used. To determine the proper method of
disposal, refer to rcra (40 cfr 261), as well as federal epa and state and
local regulations.

handling and storage precautions: use product with caution around heat, sparks,
pilot lights, static electricity, and open flame.

other precautions: empty containers retain residue (liquid &/or vapor)
& can be dangerous. Do not pressurize, cut weld, braze, solder, drill,
grind or expose such containers to heat, flame, sparks, static electricity, o
r other sources of ignition; they may explode & cause injury or death.

MSDS CKXQM ALCO METALUBE

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: sores-open wounds. Possible skin rash
if allowed to remain for prolonged time. Protect eyes from possible
"throw."
explanation of carcinogenicity: nil. Ntp-na. Iarc monograph-na. Osha
regulated-no.

effects of overexposure: none
medical cond aggravated by exposure: none

First Aid

First aid: drink milk or water to dilute-obtain medical advice if
ingested. Through washing where affected, especilally eyes.

Chemical Properties

Hcc: v6
boiling pt: >315.6c, 600.F
melt/freeze pt: >371.1c, 700.F
vapor pres: neg.

vapor density: na
spec gravity: 2.3
evaporation rate & reference: neg. (butyl acetate=1)
solubility in water: non-soluble
appearance and odor: light green-buttery, little odor.

Reactivity

Stability indicator/materials to avoid: yes
hydrogen peroxide-oxidizers.

stability condition to avoid: loses some co2 above 400 f.

hazardous decomposition products: prolonged extreme heat-carbon
monoxide/dioxide.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: dispose as proscribed by local civic
guideslines-contaoners should not be re-used.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum hydrocarbons
other rec limits: none
osha pel: na
acgih tlv: na

ingred name: pb (meets epa limits)
cas: 7439-92-1
rtecs #: of7525000
other rec limits: none
osha pel: na
acgih tlv: na
epa rpt qty: 1 lb
dot rpt qty: 1 lb

MSDS CLLVK FLUID FILM GEL WRO-EP

Hazards

Ld50 lc50 mixture: no data available
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may cause mild
irritation. Skin contact: prolonged contact could cause irritation.

inhalation: significant levels of vapor not likely to occur in
normal use. Ingestion: no information ava ilable.

explanation of carcinogenicity: none
effects of overexposure: eyes: mildly irritating. Skin: prolonged
contact could cause irritation.

medical cond aggravated by exposure: not provided

First Aid

First aid: eye: flush with plenty of water for at least 15 minutes. If
irritation persists, obtain medical attention. Skin: wipe excess
material from skin with a cloth, followed by washing with soap and
water. A waterless skin cleanser is beneficial in removing the
material from the skin. Inhalation-if respiratory symptoms develop,
move victim away from source of exposure and into fresh air. If
symptoms pers ists, seek emdical attention. Ingestion-if symptoms
develop, seek medical attention.

Chemical Properties

Hcc: v5
nrc/state lic num: not relevant
boiling pt: b.P. Text: not determined
melt/freeze pt: m.P/f.P text: not determined
decomp temp: decomp text: not provided
vapor pres: not determined
vapor density: n/d
spec gravity: 25 c: 0.933
viscosity: not provided
evaporation rate & reference: not provided
solubility in water: not soluble
appearance and odor: green, black gel. mild piney ordor.

percent volatiles by volume: not provided
corrosion rate: not provided

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: exposed flames, high temperature sources
hazardous decomposition products: combustion can produce a variety of
compounds including oxides of sulfur, oxides of carbon, water vapor
and unidentified organic and inorganic compounds, some of which may
be toxic.

Proper Disposal

Waste disposal methods: product should be disposed of via authorized
waste disposal contractors in accordance with all local and
national regulations.

Ingredients List

Ingred name: non-hazardous ingredient(s)
= wt: 100.

other rec limits: not determined
osha pel: not determined
acgih tlv: not determined