NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of highly loaded naval ordnance components, such as rollers, tracks, pinions, and racks of gun turrets, and for slush-on lubrication of open or semi-inclosed gears exposed to salt spray.
The last inventory check on this NSN was done on 08/12/2020. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Military equipments not identified by kind
Special transactions and commodities not classified according to kind
Military apparel and footwear
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,635.55 to $2,725.92.. | |
| Does NSN 9150-00-531-7854 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Spain, Germany, Republic Of Korea, Italy, Greece, and Turkey | |
| What is the NIIN of NSN 9150-00-531-7854? | |
| 005317854 or 00-531-7854 | |
| Does NSN 9150-00-531-7854 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-531-7854? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1963 | |
Effects of overexposure: irrit eyes
First aid: eye: immed flush w/water at least 15 min.
Hcc: v6
boiling pt: b.P. Text: >300f/149c
spec gravity: 1.35
solubility in water: negligible
appearance and odor: very little odor, paste-like, some color
Stability indicator/materials to avoid: yes
oxidizing matls
hazardous decomposition products: metal oxides, co*2, traces of incomp
burned carbon prod
Waste disposal methods: mfr rec landfill & incineration. Dispose iaw
local, state, fed reg
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Ld50 lc50 mixture: ld50 (oral rat)- 3.5 mg/kg (barium)
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: molbdenum compounds may be slightly
iritating. Organic barium may cause moderate skin and eye irritant.
grease may cause skin and eye irritation.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: eyes: can cause irritation, redness, blurred
vision. Skin: prolonged contact can cause irritation, dermatitis.
ingestion: can cause gastrointestinal irritation, nausea, vomiting,
and diarrhea.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: skin: wash with soap and water. Eyes: flush with copious
amounts of water, get medical attention. Ingestion: do not induce
vomiting, keep warm, get medical attention.
Hcc: v6
spec gravity: 15.0
solubility in water: nil
appearance and odor: gray/black grease, no odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: open flames
hazardous decomposition products: irritating and/or toxic fumes
including barium, sulfur, carbon and amone compounds may be
released.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: proprie
other rec limits: none specified
osha pel: 10 mg/m3 as mo
acgih tlv: 10 mg/m3 as mo
ingred name: barium sulfonate
cas: 25619-56-1
fraction by wt:
other rec limits: none specified
ingred name: lithium grease
fraction by wt: proprie
other rec limits: none specified
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 50-70%
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eye: irritation.Skin: may cause
irritation.Chronic-dermatitis.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: eye: irritation. skin: possible irritation,
dermatitis with chronic exposure. inhaled: unlikely exposure.
medical cond aggravated by exposure: pre-existing skin and eye disorders
may be aggravated by exposure to this product.
First aid: eye: flush with water for 15 minutes while holding eyelids
open.Get medical attention.Skin: wash with soap & water/waterless
cleaner.Remove contaminated clothing and launder before reuse.If
irritation p ersists see a doctor.Ingestion: no ill effects
expected.
Hcc: v6
boiling pt: b.P. Text: >570f,>299c
vapor pres:
vapor density: >1
spec gravity: 1.8
solubility in water: negligible
appearance and odor: gray-black grease, mineral oil odor
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
oxidizing agents
hazardous decomposition products: carbon monoxide, carbon dioxide, & sox
Waste disposal methods: dispose of in an appropriate disposal facility
i/a/w federal,state,local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 35-40%
other rec limits: none specified
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: >60%
other rec limits: none specified
osha pel: 5 mg mo/m3
acgih tlv: 5 mg mo/m3
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no known health hazards reported at
this time in reference literature or field usage. Product injected
under skin may cause necrosis if not treated promptly.
effects of overexposure: may cause skin irritation on sensitive skin.
medical cond aggravated by exposure: none.
First aid: eyes: flush with plenty of water. If irritation persists, see
doctor. Skin: wash with soap and water. Ingestion: treat as oil
ingestion. See doctor. --if product is injected under the skin,
see docto r immediately regardless of appearance or size. This is a
serious medical emergency--
Hcc: v6
spec gravity: 1.8
solubility in water: negligible
appearance and odor: dark paste like material. No odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames, arc welding and
other sources of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide,
metallic oxides.
Waste disposal methods: contact your local environmental officer. Keep
in covered containers pending disposal. Dispose of in accordance
with federal, state and local environmental regulations.
manufacturer recommends landfil l or incineration.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 60-62%
other rec limits: none recommended
ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 15-20%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: hydrotreated heavy naphthenic distillate, petroleum
cas: 64742-52-5
rtecs #: py8035000
fraction by wt: 10-14%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 3-6%
other rec limits: none recommended
ingred name: additives, propietary
fraction by wt: 1-2%
other rec limits: none recommended
Hcc: v6
vapor density: 13+
spec gravity: 1.8
evaporation rate & reference: 1000% slower than ether
solubility in water: nil
appearance and odor: black paste, lube oil odor.
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Ld50 lc50 mixture: not given for product as a whole
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause irritation to eyes and skin
on sensitive individuals. Prolonged or repeated contact may cause
mild skin irritation and inflammation.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: eye irritation, skin irritation.
medical cond aggravated by exposure: personnel with pre-existing skin
disorder should avoid contact.
First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing.
wash with soap and water. If irritation persist, get medical
attention. Inh alation: remove to fresh air. Restore breathing. Get
medical attention. Ingestion: call a physician. Do not induce
vomiting. Keep warm.
Hcc: v6
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
decomp temp: decomp text: not given
vapor pres: not given
vapor density: not given
spec gravity: 1.00
viscosity: not given
evaporation rate & reference: not given
solubility in water: insoluble
appearance and odor: dark paste like, no odor
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidizing agents, welding
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon monoxide, carbon dioxide,
metallic compounds
Waste disposal methods: discard any product, residue, disposal container
or liner in accordance with all federal, state and local
regulations.
Ingred name: mineral oil, petroleum distillate, solvent dewaxed (mild),
heavy paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 10-20%
other rec limits: none recommended
ingred name: mineral oil, hydrotreated (mild), heavy naphthenic
distillate, petroleum
cas: 64742-52-5
rtecs #: py8035000
fraction by wt: 10-20%
other rec limits: none recommended
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 60-62%
other rec limits: none recommended
osha pel: 5 mg mo/m3
acgih tlv: 5 mg mo/m3
ingred name: lithium hydroxy stearate
fraction by wt: 3-6%
other rec limits: none recommended
route of entry inds - inhalation: no
skin: no
ingestion: yes
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: effects of overexposures: may cause irritation to eyes and
skin on sensitive individuals. Prolonged or repeated contact may cause mild
skin irritation and inflammation.
explanation of carcinogenicity: no carcinogens present.
signs and symptions of overexposure: may cause irritation to eyes and skin on
sensitive individuals. Prolonged or repeated contact may cause mild skin
irritation and inflammation.
medical cond aggravated by exposure: personnel with pre-existing skin disorder
should avoid contact.
first aid: eyes: flush with water for at least 15 minutes. Skin: wash with soap
and water. See physician if irritation persists. Inhalation: remove to fresh
air. See physician if irritation persists. Oral: call a physician. Do not
induce vomiting. Keep warm.
hcc: v6
spec gravity: 1.00
solubility in water: insoluble
appearance and odor: dark paste like, no odor.
percent volatiles by volume: none.
product id: huskey molypaste 60 grease
cage: to437
assigned ind: y
company name: husk-itt corporation
street: 1580 industrial avenue
city: norco ca
zipcode: 91760
health emergency phone: (909)340-4000
label required ind: y
date of label review: 12/10/1999
status code: a
mfg label no: not provided.
label date: 07/01/1998
year procured: 2000
origination
eye protection ind: yes
skin protection ind: no
signal word: caution
respiratory protection ind: no
health hazard: slight
contact hazard: slight
fire hazard: none
=======================================================
responsible party cage: to437
trans id no: 150703
product id: huskey molypaste 60 grease
msds prepared date: 07/01/1998
review date: 03/04/2000
mfn: 1
net unit weight: 15 lbs can
multiple kit number: 0
unit of issue: cn
container qty: 0
type of container: can
Hazard and precautions: target organs: not provided. Effects of overexposures:
may cause irritation to eyes and skin on sensitive individuals. Prolonged or
repeated contact may cause mild skin irritation and inflammation. Fi rst aid:
eyes: flush with water for at least 15 minutes. Skin: wash with soap and
water. See physician if irritation persists. Inhalation: remove to fresh air.
see physician if irritation persists. Or al: call a physician. Do not induce
vomiting. Keep warm. Fire: co2, water fog, foam. Spill: contain and remove as
appropriate. Keep out of sewers and water systems.
spill release procedures: stop flow, scrape, wipe, mop up or absorb with
diatomaceous earth or other inert material. Store in appropriate container
for disposal. Dla- staff: contain and remove as appropriate. keep out of
sewers and water system. spills may cause slippery floors.
neutralizing agent: none provided by manufacturer.
waste disposal methods: disposal should be in compliance with federal, state,
and local laws.
handling and storage precautions: avoid storage near open flame or other
sources of ignition. Spills may cause slippery floors. Proper footwear
required.
other precautions: remove contaminated clothing and launder before reuse. Wash
hands with soap and water before eating, drinking or smoking. Discard
contaminated gloves and shoes.
ld50 lc50 mixture: not provided
route of entry inds - inhalation: no
skin: no
ingestion: yes
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: effects of overexposures: may cause irritation to eyes and
skin on sensitive individuals. Prolonged or repeated contact may cause mild
skin irritation and inflammation.
explanation of carcinogenicity: no carcinogens present.
signs and symptions of overexposure: may cause irritation to eyes and skin on
sensitive individuals. Prolonged or repeated contact may cause mild skin
irritation and inflammation.
medical cond aggravated by exposure: personnel with pre-existing skin disorder
should avoid contact.
first aid: eyes: flush with water for at least 15 minutes. Skin: wash with soap
and water. See physician if irritation persists. Inhalation: remove to fresh
air. See physician if irritation persists. Oral: call a physician. Do not
induce vomiting. Keep warm.
hcc: v6
nrc/state lic no: not relevant
decomp text: not provided
spec gravity: 1.00
solubility in water: insoluble
appearance and odor: dark paste like, no odor.
percent volatiles by volume: none.
corrosion rate: not provided
product id: 71500, huskey molypaste 60 grease
cage: to437
assigned ind: y
company name: husk-itt corporation
street: 1580 industrial avenue
city: norco ca
zipcode: 91760
health emergency phone: (800)424-9300
label required ind: y
date of label review: 05/16/2001
status code: a
mfg label no: not provided
origination code: f
eye protection ind: yes
skin protection ind: no
signal word: caution
respiratory protection ind: no
health hazard: slight
contact hazard: slight
fire hazard: none
=======================================================
responsible party cage: to437
trans id no: 156979
product id: 71500, huskey molypaste 60 grease
msds prepared date: 07/01/1998
review date: 05/16/2001
mfn: 2
net unit weight: 15 lbs
multiple kit number: 0
unit of issue: cn
container qty: 0
type of container: can
additional data: weight 15 lb can & 2 oz tube, per procurement. Not
regulated for transportation, per msds.
Hazard and precautions: target organs: n/p. Eyes: flush with water. Skin: wash
with soap and water. Inhalation: remove to fresh air. Oral: call a physician.
do not induce vomiting. Spill: contain and remove. Fire: co2, water fog,
foam. Prolonged contact causes skin irritation.
spill release procedures: stop flow, scrape, wipe, mop up or absorb with
diatomaceous earth or other inert material. Store in appropriate container
for disposal.
neutralizing agent: not relevant
waste disposal methods: disposal should be in compliance with federal, state,
and local laws.
handling and storage precautions: avoid storage near open flame or other
sources of ignition. Spills may cause slippery floors. Proper footwear
required.
other precautions: remove contaminated clothing and launder before reuse. Wash
hands with soap and water before eating, drinking or smoking. Discard
contaminated gloves and shoes.
skin: yes
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: products of this type have been used for years with no
known ill effects. This product contains no carcinogens or mutagens as
defined by osha or iarc. All components are listed on the tsca inventory,
and canadian dsl chemical inventory, this product contains no known
controlled substance under w.
explanation of carcinogenicity: this product contains no carcinogens or
mutagens as defined by osha or iarc.
signs and symptions of overexposure: products of this type have been used for
years with no known ill effects.
hcc: n1
boiling point: >371.1c, 700.F
spec gravity: >1@16c
solubility in water: nil
appearance and odor: grey semisolid-bland
product id: sl-086, grease, ordinance, ep
cage: 0r0e6
company name: summit lubricants inc
street: 4080 pearl street
po box: 966
city: batavia ny
zipcode: 14020
health emergency phone: 716-344-4301 fx#-4302
label required ind: y
date of label review: 12/06/2001
status code: a
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: no
health hazard: slight
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: 0r0e6
trans id no: 160160
product id: sl-086, grease, ordinance, ep
msds prepared date: 10/11/2001
review date: 12/06/2001
mfn: 1
net unit weight: 15 lns
multiple kit number: 0
review ind: y
unit of issue: cn
container qty: 0
type of container: can
Hazard and precautions: products of this type have been used for years with no
known ill effects. This product contains no carcinogens or mutagens as
defined by osha or iarc. All components are listed on the tsca inventory,
and canadian dsl chemical inventory, this product contains no known
controlled substance under w.
spill release procedures: absorb with sand or inert material. Sweep or scoop up
and remove.
waste disposal methods: incinerate.
handling and storage precautions: keep away from sparks and open flames.
other precautions: wash thoroughly after handlling. Do not get in eyes or on
clothing.