Worldwide distributor of NSN parts and consumables located in the USA.
A suspension which consists of fine molybdenum disulfide particles in mineral oil or silicone fluid.
The last inventory check on this NSN was done on 09/10/2022. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating oils with or without additives, nesoi
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
145000 - Oil o/t petro lubricating noi
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $387.42 to $645.71.. | |
Does NSN 9150-00-543-7220 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, Defense Threat Reduction Agency, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, National Aeronautics and Space Administration, Austria, Poland, Bulgaria, Brazil, Spain, Columbia, Taiwan, Province Of China, Singapore, Malaysia, Thailand, Australia, Belgium, Canada, New Zealand, France, Germany, Republic Of Korea, United Kingdom, Netherlands, Italy, Denmark, Norway, Greece, and Turkey | |
What is the NIIN of NSN 9150-00-543-7220? | |
005437220 or 00-543-7220 | |
Does NSN 9150-00-543-7220 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-543-7220? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1963 |
Effects of overexposure: may be irritating to eyes and sin, low order of
acute toxicity if ingested.
First aid: skin: wash w.Soap & h*2o. Eyes: flush w. H*2o. Ingested: don't
induce vomiting. Inhaled: remove to fresh air. Give cpr/oxygen if
need. Keep warm & quiet. Remove contaminated clothing. Never give
anything by mouth to unconscious person.
Hcc: v6
solubility in water: insoluble
appearance and odor: smooth black grease with sight odor.
Stability indicator/materials to avoid: yes
strong oxiding agnets.
stability condition to avoid: avoid heat,open flames
hazardous decomposition products: complex mixture,possible co &
unidentified organic compound.
Waste disposal methods: dispose of an appropriate disposal facilit in
compliance wit local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingredients
fraction by wt: 100%
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause irritation of eyes and skin.
ingestion: may be harmfull. Chronic: none known.
effects of overexposure: irritation.
medical cond aggravated by exposure: none known
First aid: inhalation: remove to fresh air. Eye contact: flush with water
for 15 minutes. Get medical help. Skin contact: wash with soap and
water. Ingestion: do not induce vomiting, drink 1-2 glasses of
water. Get medical help immediately.
Hcc: v6
boiling pt: b.P. Text: >300f,>149c
vapor pres:
spec gravity: 2.0
solubility in water:
appearance and odor: grayish to black pourable slurry
percent volatiles by volume:
Stability indicator/materials to avoid: yes
hazardous decomposition products: silicon dioxide,carbon
dioxide,traces-incomple burn c prod
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 50%
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
ingred name: silicone oil
fraction by wt: 50%
Effects of overexposure: eye - may cause temporary discomfort. Skin -
may cause slight irritation.
First aid: eyes - flush with water. Skin - wipe off and flush with
water.
Hcc: v6
boiling pt: b.P. Text: >300f
vapor pres:
spec gravity: 2.0
evaporation rate & reference: (ether = 1):
solubility in water:
appearance and odor: gray to blackish pourable slurry
percent volatiles by volume:
Stability indicator/materials to avoid: yes
oxidizing agent
hazardous decomposition products: silicone dioxide/co2/traces of
incomplete burned carbon prod
Waste disposal methods: incinerate or landfill where permitted under
appropriate federal, state and local regulation.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lubricating oil
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: mild eye irritation.
explanation of carcinogenicity: data per msds
effects of overexposure: mild eye irritation . Do not rub eyes with
soiled hands.
medical cond aggravated by exposure: none expected
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.
skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
spec gravity: 1.66
solubility in water: negligible
appearance and odor: dark grey viscous liquid.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat;stir well before use.
hazardous decomposition products: oxides of carbon,silicone & sulfur.
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 50.0%
other rec limits: none specified
ingred name: methyl phenyl silicone oil
cas: 63148-52-7
fraction by wt: 50.0%
other rec limits: none specified
Effects of overexposure: eye;skn: irrt. Inhal: irrt.Ingest: poss sulfide
toxicity from h: 25. Naus, vomit, diarr
First aid: 1020
Hcc: v6
appearance and odor: blue-gray viscous liquid,
Stability indicator/materials to avoid: yes
hydrogen peroxide
stability condition to avoid: excess heat
hazardous decomposition products: oxides of carbon, silicon, sulfur
Waste disposal methods: incinerate in approved facility iaw all laws &
regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: silicone oil
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause tempory discomfort to eyes.
may be harmful if swallowed. Chronic: no known chronic adverse
effects.
explanation of carcinogenicity: the product contains no ingredient that
is listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: eyes: redness, discomfort. Ingestion: nausea,
vomiting.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-flush with water. Skin-remove with soap & water.
inhal-remove to fresh air. Ingest-consult physician.
Hcc: v6
boiling pt: b.P. Text: >300f/149c
vapor pres:
spec gravity: 1.57
evaporation rate & reference:
solubility in water: negligible
appearance and odor: gray semi-paste, odorless
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: contact with incompatibles.
hazardous decomposition products: silicone dioxide, carbon monoxide,
carbon dioxide, and traces of incompletely burned hydrocarbons.
Waste disposal methods: dispose i/a/w all federal, state and local
regulations. See dot (49cfr171.8), epa (40cfr117) and rcra
(40cfr261) for information.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 50%
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
ingred name: methyl phenyl polysiloxane
cas: 63148-52-7
fraction by wt: 50%
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of
eyes,skin,respiratory or g.I.Tracts;redness or burns of eyes/skin
possible.
explanation of carcinogenicity: data per msds
effects of overexposure: may cause irritation of eyes,skin,respiratory
or g.I.Tracts; no other data available.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.
skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
boiling pt: b.P. Text: >400f,>204c
vapor pres:
vapor density: >1.0
spec gravity: 1.66
solubility in water: negligible
appearance and odor: silicone products
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures
hazardous decomposition products: none noted
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: polydimethyl silicone
fraction by wt: 50.0%
other rec limits: none specified
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 50.0%
other rec limits: none specified
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-mild eye irritation. May cause
irritation of respiratory tract. Ingestion: not expected to cause
any ill effects. Chronic: molybdenum may damage liver and kidney
effects of overexposure: irritation., weight loss
medical cond aggravated by exposure: none known
First aid: inhalation: remove to fresh air. Eye contact: flush with water
for 15 minutes. Skin contact: wash with soap and water. Get med
attention if symptoms persist. Ingestion: do not induce vomiting.
get medical help.
Hcc: v6
boiling pt: b.P. Text: >400f,>204c
vapor pres:
vapor density: >1
spec gravity: 1.66
solubility in water: negligible
appearance and odor: viscous liquid.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: oxides of carbon,silicone & sulfur.
Waste disposal methods: controlled incineration or landfill. Follow
local, state and federal regulations for disposal.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 50%
other rec limits: none specified by m.
ingred name: silicone oil; methyl phenyl polysiloxane
cas: 63143-52-7
fraction by wt: 50%
other rec limits: none specified by m.
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product may be mildly irritating to
body tissues especially with prolonged or repeated contact.
inhaling of mist is dangerous.
explanation of carcinogenicity: the product contains no ingredient that
is listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: eye: irritation skin: possible irritation.
inhaled: (oil mist) respiratory irritation, chemical pneumonia.
medical cond aggravated by exposure: none expected
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention. Skin:
remov e contaminated clothing. Wash with soapand water. If
irritation persists, get medical advice. Ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
spec gravity: 1.66
solubility in water: negligible
appearance and odor: dark grey viscous liquid.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat;stir well before use.
hazardous decomposition products: oxides of carbon,silicone & sulfur.
Waste disposal methods: dispose i/a/w all federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 50.0%
other rec limits: none specified
ingred name: methyl phenyl silicone oil
cas: 63148-52-7
fraction by wt: 50.0%
other rec limits: none specified
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product may be mildly irritating to
body tissues especially with prolonged or repeated contact.
inhaling of mist is dangerous.
explanation of carcinogenicity: the product contains no ingredient that
is listed by iarc, ntp or osha as a carcinogen.
effects of overexposure: eye: irritation skin: possible irritation.
inhaled: (oil mist) respiratory irritation, chemical pneumonia.
medical cond aggravated by exposure: none expected
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention. Skin:
remov e contaminated clothing. Wash with soapand water. If
irritation persists, get medical advice. Ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
spec gravity: 1.66
solubility in water: negligible
appearance and odor: dark grey viscous liquid.
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat.
hazardous decomposition products: oxides of carbon,silicone & sulfur.
Waste disposal methods: dispose i/a/w all federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 50.0%
other rec limits: none specified
ingred name: methyl phenyl silicone oil
cas: 63148-52-7
fraction by wt: 50.0%
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is not known.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: mild irritation. Skin: slight
irritation. Inhalation: vapors may be slightly irritating to nose,
throat, upper respiratory tract. Ingestion: generally considered to
have a low order of acute oral to xicity.
explanation of carcinogenicity: manufacturer gave no information about
carcinogenicity. Hmis does not expect it to be carcinogenic.
effects of overexposure: irritation of eyes, skin, respiratory tract.
medical cond aggravated by exposure: mfr gave no information on msds.
First aid: if irritation persists or is severe, get medical attention.
eye: flush w/water to 15 min. Skin: wash w/soap & water. Remove
contaminated clothing & launder before reuse. Inhaled: remove from
exposure. Ai d or restore breathing as needed. Ingested: do not
induce vomiting. In general no treatment is necessary unless large
quantities of the product have been ingested. However, call for
medical advice.
Hcc: v6
nrc/state lic num: none
boiling pt: b.P. Text: >300f,>149c
melt/freeze pt: m.P/f.P text: not avail.
vapor pres:
vapor density: not applic
spec gravity: 1.0
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: dark liquid with no distinct odor
Stability indicator/materials to avoid: yes
contact w/strong oxidizing agents.
stability condition to avoid: avoid heat, flame.
hazardous decomposition products: mixture of airborne solid, liquid
particulates, gases, carbon monoxide, organic compounds may be
formed upon combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: place in an approptiate disposal facility i/a/w
local regulations. Under epa-cwa product is considered an oil.
spills into or leading to surface waters cause a sheen & must be
reported to the nationa l response center; 800-424-8802.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phenylmethylsiloxane
cas: 63148-52-7
fraction by wt: 40-70%
other rec limits: none specified
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 30-60%
other rec limits: none specified
osha pel: 10 mg mo/m3
acgih tlv: 10 mg mo/m3
Hcc: v6
boiling pt: b.P. Text: >300f,>149c
melt/freeze pt: m.P/f.P text: not availab
vapor pres:
vapor density: n/availabl
spec gravity: 1.0 approx
evaporation rate & reference: not available.
solubility in water: negligible.
appearance and odor: dark liquid w/no distinct odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat, flame & contact w/strong
oxidizing agetns.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: phenylmethylsiloxane; (silicone)
cas: 63148-52-7
fraction by wt: 40-70%
other rec limits: none recommended
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 30-60%
other rec limits: none recommended
osha pel: 5 mg mo/m3
acgih tlv: 5 mg mo/m3
Ld50 lc50 mixture: not available.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: based on component
information, product is minimally irritating to the eyes. Skin
contact: repeated or prolonged exposure may be slightly irritating
to the skin. Inhalation: based on comp onent information, product
may be mildly irritating to the nose, throat and respiratory tract.
ingestion: silicone is generally considered to have a low order of
acute oral toxicity.
explanation of carcinogenicity: this product does not contain any
carcinogen as listed by iarc, ntp, or osha.
effects of overexposure: irritation as noted above.
medical cond aggravated by exposure: none known
First aid: eye contact: flush eyes with water. If irritation occurs, get
medical attention. Skin contact: remove contaminated clothing/shoes
and wipe excess from skin. Flush with water. follow by washing
with s oap and water. If irritation occurs, get medical attention.
inhalation: remove victim to fresh air and provide oxygen if
breathing is difficult. Ingestion: do not induce vomiting. In
general no treatm ent is necessary unless large quantities of
product are ingested. However, get medical advice.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: >148.9c, 300.F
melt/freeze pt: m.P/f.P text: not available.
decomp temp: decomp text: not provided.
vapor pres: >5
spec gravity: 1.0 approx.
evaporation rate & reference: not available.
solubility in water: negligible
appearance and odor: dark liquid - no distinct odor
percent volatiles by volume: not provided
corrosion rate: not provided.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: flame, heat
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates and gases will evolve when undergoes pyrolysis
or combustion. Carbon monoxide and other unidentified organic
compounds may be formed.
Waste disposal methods: place in appropriate disposal facility in
compliance with local regulations.
Ingred name: silicone/phenylmethylsiloxane
cas: 63148-52-7
minumum % wt: 40.
maxumum % wt: 70.
other rec limits: none recommended
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
minumum % wt: 30.
maxumum % wt: 60.
other rec limits: not provided.
osha pel: not established.
acgih tlv: not established.
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
and gi tracts. Acute - eye contact: based on component information,
product is minimally irritating to the eyes. Skin contact:
prolonged or repeated exposure may be slightly irritating to the
skin. Inhalation: based on component information, product may be
mildly irritating to the nose, throat and respiratory tract.
ingestion: silicone is generally considered to have a low order of
acute oral toxicity. Chronic - unknown.
explanation of carcinogenicity: none
effects of overexposure: irritation
First aid: get medical help if irritation occurs. Inhaled: move to fresh
air. Provide oxygen if breathing is difficult. Get medical
attention. Eyes: immediately flush with water. Skin: remove
contaminated clothi ng and shoes. Wipe off excess from skin. Flush
skin with water. Follow by washing with soap and water. Do not
reuse clothing until cleaned. Ingestion: do not induce vomiting. In
general, no treatment is necessary unless large quantities of
product are ingested. However, get medical advice. Note to
physician: emesis is unnecessary in high viscosity, low volatility
products, i.E., most oils and grea ses.
Hcc: v6
boiling pt: >148.9c, 300.F
b.P. Text: approx
vapor pres: >5 (mm/hg) approx
spec gravity: 1.0 (h20=1) approx
solubility in water: negligible
appearance and odor: dark liquid with no distinct odor
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat, flame
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates and gases will evolve. Carbon monoxide, carbon
dioxide, and other unidentified organic compounds may be formed.
conditions to avoid polymerization: will not occur. none listed by mfr.
Waste disposal methods: dispose of in accordance with local state and
federal regulations. Under epa-cwa, this product is considered an
oil under section 311. Spills into or leading to us surface waters
or watercourse or sew er that cause a visible sheen must be
reported to the national response center, 800-424-8802.
Ingred name: silicone
cas: 63148-52-7
code: f
= wt: 50.
other rec limits: none recommended
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
= wt: 50.
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may be an eye or skin irritant. Low to
mediam in toxicity
explanation of carcinogenicity: not listed
effects of overexposure: none known
medical cond aggravated by exposure: none known
First aid: eye: flush with water for 15 minutes. See physician. Skin:
wash thoroughly with soap and water. See physician if necessary.
remove contaminated clothing. Ingestion: do not induce vomiting.
drink plent y of water. Do not give anything to an unconscious
victim. In general, no treatment is necessary unless large
quantities are ingested. However, get medical advice. Inhalation:
remove to fresh air. See physician if necessary. Note to
physician: in general, emesis induction is unnecessary in high
viscosity, low volatility products ( i.E. Most oils and greases)
Hcc: n1
appearance and odor: grayish, oily liquid, low odor.
Stability indicator/materials to avoid: yes
none known
stability condition to avoid: none
Waste disposal methods: free liquids may not be landfilled. Recover
and/or incinerate liquids where possible. Obey local, state, and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: arpolube 25681: mixture of the following ingredients
= wt: 100.
code: f
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
= wt: 50.
osha pel: 15 mg/cu m
ingred name: phenylmethylpolysiloxane
cas: 63148-52-7
= wt: 50.