NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A suspension which consists of fine molybdenum disulfide particles in mineral oil or silicone fluid.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating oils with or without additives, nesoi
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $182.41 to $304.02.. | |
| Does NSN 9150-00-558-0813 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Air Force, Department Of The Navy, U.s. Coast Guard, Spain, Canada, and Turkey | |
| What is the NIIN of NSN 9150-00-558-0813? | |
| 005580813 or 00-558-0813 | |
| Does NSN 9150-00-558-0813 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-558-0813? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1963 | |
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is nearly non-hazardous. It is
mildly irritating, in particular with prolonged and/or repeated
contact. It may also produce pulmonary damage if a mist of the
product is inhaled or it is otherw ise aspirated into the lungs.
effects of overexposure: eye/skin: may produce irritation with prolonged
or repeated contact.
medical cond aggravated by exposure: none known
First aid: eye: flush with water 15 min. Skin: remove contaminated
clothing. Wash area with soap and water. Launder clothing before
reuse. Inhaled: remove from exposure. Give artificial respiration
or oxygen if needed. Ingestion : do not induce vomiting. Give water
or milk. (nothing by mouth if unconsciousness) get immediate
medical care. If symptoms persist or are severe, get medical care.
Hcc: v6
boiling pt: b.P. Text: >550f/288c
melt/freeze pt: m.P/f.P text: nil
vapor pres: nil
vapor density: nil
spec gravity: 0.90
evaporation rate & reference: nil
solubility in water: negligible
appearance and odor: dark, opaque liquid. Petroleum odor.
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: none reported
hazardous decomposition products: burning may produce oxides of carbon,
nitrogen, sulfur, phosphorus.
Waste disposal methods: dispose in acoordance with federal, state and
local regulations. Recycle if possible. Manufacturer suggests
incineration or landfill.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum hydrocarbons
other rec limits: acgih stel 10 mg/m3
osha pel: 5 mg/m3 oil mist
acgih tlv: 5mg/m3 oil mist
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin: may cause irritation. Eyes:
product vapors, and mist may cause eye irritation and burning.
inhalation: vapors may irritate the mucosal membranes of mouth,
nose, and throat. Ingestion: ingestion via minor contamination of
fingers or food is not likely to cause significant discomfort or
adverse effect.
explanation of carcinogenicity: this product contains less than 0.2%
(typically) of crystalline silica.
effects of overexposure: skin: prolonged or repeated contact tends to
remove natural skin oil, and may cause irritation, rash, and
possibly dermatitis. Eyes: may cause tearing. Inhalation: may cause
headache, nausea, and vomi ting. Oil vapors may accumulate in the
lungs and cause chemical pneumonitis. Ingestion: may cause nasuea
and vomiting.
medical cond aggravated by exposure: existing chronic dermal, and
respiratory diseases.
First aid: eye: flush immediately with water for at least 15 minutes,
occasionally lifting the eyelid. Get prompt medical attention.
skin: wipe off, then wash thoroughly with soap and water.
inhalation: remove f rom exposure. Give artificial respiration or
oxygen if needed. Get prompt medical attention. Ingestion: do not
induce vomiting. Get prompt medical attention.
Hcc: v6
spec gravity: 1.09
solubility in water: negligible
appearance and odor: paste, dark gray, slight odor.
Stability indicator/materials to avoid: yes
strong oxidizers, acids, and alkalies.
stability condition to avoid: prolonged exposure to elevated
temperature.
hazardous decomposition products: smoke and toxic gases including traces
of ammonia and oxides of carbon, antimony, sulfur and nitrogen.
Waste disposal methods: dispose in acoordance with federal, state and
local regulations. Recycle if possible.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: solvent refined heavy naphthenic distillate, petroleum
cas: 64741-96-4
rtecs #: py8040000
fraction by wt: 58-68%
other rec limits: none recommended
ingred name: graphite, natural
cas: 7782-42-5
rtecs #: md9659600
fraction by wt: 1-5%
other rec limits: none recommended
osha pel: 15 mppcf rdust
acgih tlv: 2 mg/m3 rdust; 9293
ingred name: talc (containing asbestos)
cas: 14807-96-6
rtecs #: mw2700000
fraction by wt: 10-18%
other rec limits: none recommended
osha pel: 0.2 fibers/cc
acgih tlv: 0.2 fibers/cc; 9293
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: no
health hazards acute and chronic: skin: may cause
irrit.Eyes: prod/vap/mist may cause irrit,burning.Inhal: vap may
irrit mucosal membr of mouth/nose/throat.Intense &/or prol expo to
vap concen exceeding tlv/pel may cuase head,nau,vomit.O il vap may
accumulate in lungs & may cause chem pneuitis.Ingest: via minor
contam of fingers/food not likely to(sign/sym)
explanation of carcinogenicity: per
msds: carcinogenicity: ntp/iarc-yes(approx 0.2% crystalline
silica);osha-no.
effects of overexposure: health: cause signif discomft/adverse
effect.However aspiration(w/vomitus)into lungs may cause
mild-severe pulm injury.Chronic: skin: prol/rep contact tends to
remove nat oil,may cause irrit,rash,possibl y
derm.Eye: prod/vap/mist irrit,burn.Inhal: same sympt/effects under
inhal.Ingest: lg quant unlikely ingest.Irrit gi(suppl)
medical cond aggravated by exposure: existing chrnic
dermal,respiratory,and possibly gastrointestinal diseases.
First aid: skin: wipeoff,wash well w/soap/h2o.Eye: flush immed w/h2o
@least 15mins,lift eyelid.Get prompt med attn.Inhal: immed remove to
fresh air.Breath diff give oxy;breath stop give art resp.Get prompt
med attn .Ingest: consc give 1-2glasses of h2o/milk-dil stomach.Dont
induce vomit.Use all avai precaut to prevent aspiration of vomitus
into lungs-fatal.Get prompt med attn.Dr: intubate stomach.Aspirate
pharynx.
Hcc: v6
boiling pt: b.P. Text: nd
melt/freeze pt: m.P/f.P text: nd
decomp temp: decomp text: np
vapor pres:
vapor density:
spec gravity: 1.09
ph: na
viscosity: np
evaporation rate & reference:
solubility in water: negligible,
appearance and odor: paste, dark greay paste, slight odor
percent volatiles by volume: nd
corrosion rate: np
Stability indicator/materials to avoid: yes
strong oxidizers,acids, and alkalies.
stability condition to avoid: prolonged exposure to elevated
temperature.
hazardous decomposition products: smoke & toxic gases including traces
of ammonia;& oxides of
carbon,sulfur,molybdenum,magnesium,antimony,silicon,nitrogen
Waste disposal methods: dispo of waste iaw applic fed/state(or
province)/loc laws/regs.(serv of lic haz waste-dispo faci may be
utilized).Users responsibility to comply w/clean air act,clean
water act,rcra.Rcra/sara 302,313/ cercla: none.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil,petro distillate,solvt refined(severe),heavy
naphthenic,(non-carc-iarc);(severely-treated petro distillates)
cas: 64741-96-4
rtecs #: py8040001
fraction by wt: 58-68%
other rec limits: none recommended
ingred name: graphite, natural
cas: 7782-42-5
rtecs #: md9659600
fraction by wt: 12-18%
other rec limits: none recommended
osha pel: 15 mppcf; z-3
acgih tlv: 2 mg/m3 rdust; 9596
ingred name: industrial talc
cas: 14807-96-6
rtecs #: mw2700000
fraction by wt: 10-18%
other rec limits: none recommended
osha pel: 0.2 fibers/cc
acgih tlv: 0.2 fiber/cc,a1;9596
ingred name: silica, crystalline
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
ingred name: product may contain additional ingreds none of which is
considered hazarouds at the present time.
other rec limits: none recommended
Ld50 lc50 mixture: tlv for oil mist is 5 mg/m3.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory
& gastrointestinal tracts. Acute- eye: may cause irritation. Skin:
may cause irritation. Inhale: vapors may cause respiratory tract
irritation. Excessive inhalati on of mists above tlv may cause
chemical pneumonia. Oral: can cause gi irritation, vomiting.
chronic- defatting of skin.
explanation of carcinogenicity: none.
effects of overexposure: irritation, redness, nausea, vomiting,
diarrhea, blurred vision, tearing, defatting of skin, abdominal
discomfort, headache
medical cond aggravated by exposure: persons with pre-existing skin
disorders, eye problems or impaired respiratory function may be
more susceptible to the effects of this product.
First aid: call physician if symptoms persist. Inhaled: move to fresh
air. Provide cpr/oxygen if needed. Eyes: flush with water for 15
minutes. Hold eyelids open. Skin: wipe off. Wash skin with soap and
water. O ral: do not induce vomiting. If person is
drowsy/unconscious, place on left side with head down. Get medical
attention immediately. If possible, do not leave individual
unattended.
Hcc: v6
nrc/state lic num: not relevant
spec gravity: 0.9100
solubility in water: insoluble
appearance and odor: dark grey/black liquid - characteristic odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong acids, strong alkalis
stability condition to avoid: prolonged exposure to excessive heat
hazardous decomposition products: carbon monoxide, carbon dioxide,
various hydrocarbons, smoke, fumes, oxides of sulfur
Waste disposal methods: this product is regulated as used oil by the
epa. Under the used oil management standards (40 cfr 279) effective
3/8/93, epa presume used oil will be recycled. Consult local, state
or federal authorit ies.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillate, solvent refined
(severe), heavy naphthenic
cas: 64741-96-4
rtecs #: py8040001
fraction by wt: 95- 100%
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist
Ld50 lc50 mixture: tlv for oil mist is 5 mg/m3.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory
& gastrointestinal tracts. Acute- eye: may cause irritation. Skin:
may causeskin irritation. Skin absorption: no acute effects
expected. Ingestion: do not ingest. ingestion may irritate the
gastrointestinal tract and may cause nausea and vomiting.
inhalation: vapors may irritate the muscosal membranes of mouth,
nose and throat. Oil vapors may accumulate in the lungs, and may
cause chemical pneumonia. Chronic effects: prolonged or repeated
contact with petroleum oil may remove natural oils and fats from
the skin.
explanation of carcinogenicity: none.
effects of overexposure: intense and/or prolonged exposure to vapor
concentrations exceeding the tlv/pel may cause headache, nausea,
and vomiting.
First aid: eye-flush with water for 15 min occasionally lifting upper
and lower lids. Consult physician. Skin-wipe off, then wash
thoroughly with soap and water. Get emdical attention if irritation
occurs. Inges tion-do not induce vomiting; get medical attention
immediately. Inhalation-remove to fresh air. If not breathing, give
artificial respiration, preferably mouth-to-mouth. If breathing is
difficult, giv e oxygen. Call a physician.
Hcc: v6
boiling pt: b.P. Text: n/known
melt/freeze pt: m.P/f.P text: n/known
vapor pres: n/determined
vapor density: n/d
spec gravity: 0.9100
ph: n/applicable
viscosity: n/available
evaporation rate & reference: n/d (nbutyl acetate=1)
solubility in water: insoluble
appearance and odor: dark grey/black liquid - characteristic odor
percent volatiles by volume: n/d
Chemicals present above threshold values. This product is a mixture
and is not listed in the tsca inventory. the individual
ingredients in the product are listed in the tsca inventory.
state regulatory information: california proposition 65: warning! This
product contains trace amounts of arsenic, cadmium, and lead which
the state of california has found to cause cancer, birth defects,
or other reproductive harm .
Waste disposal methods: this product is regulated as used oil by the
epa. Under the used oil management standards (40 cfr 279) effective
3/8/93, epa presume used oil will be recycled. Dispose of in
accordance with local, sta te or federal authorities.
Ingred name: mineral oil, petroleum distillate, solvent refined
(severe), heavy naphthenic
cas: 64741-96-4
rtecs #: py8040001
fraction by wt: 95- 100%
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist