Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Semifluid Lubricating Oil

NSN: 9150-00-687-4241 | Model: MILL46000

A mixture with a mineral and/or synthetic base, not having a true grease structure. It contains a thickening agent which increases viscosity. The lubricant is compounded specifically to be effective in a wide temperature range. Excludes grease, aircraft ordnance.

NSN Properties and Flags
NATO Stock Number
9150-00-687-4241
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Any acceptable
Service Characteristics
Antiwear and corrosion resistive and oxidation resistant
Quantity Within Each Unit Package
1.000 quarts
Effective Tempurature Range Rating
-65.0/+260.0 degrees fahrenheit

Inventory Check

The last inventory check on this NSN was done on 09/12/2023. Due to rapid changes in inventory this may not be the current stock qty.

  • New Surplus: 16
  • New: 169

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-687-4241 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • MILL46000
Cage Codes:
  • Military Specifications (CAGE 81349)
Schedule B & Trade:
  • Schedule B: 2710193080 (NAICS 324110)

    Lubricating oils with or without additives, nesoi

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    155250 - Petro prods: petrolatum preps sub2

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    R - 65.0

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    H
  • Quantity per pack
    1
  • Unit of Measure
    Qt
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    R2200x-
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $111.58 to $185.96..
Does NSN 9150-00-687-4241 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Hungary, Lithuania, Poland, Brazil, Spain, Singapore, Malaysia, Australia, Belgium, Canada, New Zealand, Germany, Republic Of Korea, United Kingdom, Netherlands, Portugal, Italy, Denmark, Greece, and Turkey
What is the NIIN of NSN 9150-00-687-4241?
006874241 or 00-687-4241
Does NSN 9150-00-687-4241 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-687-4241?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 01, 1963
MSDS

Material Safety

MSDS BFLRX BRAYCOTE 646 LSA

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of
eyes,skin,respiratory or g.I.Tracts;cns effects like
headache,dizziness,nausea and vomiting.Chronic: drying of
skin,defatting or dermatitis.

effects of overexposure: may cause skin & eye irritation with prolonged
contact.

medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.

First Aid

First aid: inhalation: remove to fresh air. Resuscitate if not breathing.

get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.

skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.

Chemical Properties

Hcc: v6
spec gravity: 0.895
solubility in water: negligible
appearance and odor: amber color oil,odor or mineral oil.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents such as: h*2o*2,chromic acid,bromine
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: if combusted, co*2, co, toxic
hydrocarbs, other toxic oxides

Proper Disposal

Waste disposal methods: keep in covered drums,pending disposal. Handle &
dispose in full compliance with all applicable
international,federal,state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum oil
fraction by wt: unk

ingred name: additives mixture(as detergents,dispersants,oxidation
inhibitor & corrosion inhibitors)
fraction by wt: unk

ingred name: zinc dialkyl dithiophosphate
fraction by wt: unk

ingred name: zinc diaryl dithiophosphate
fraction by wt: unk

MSDS BFLRY D10-46, MIL-L-46000B

Hazards

Effects of overexposure: not expected to cause illness, except in very
sensitive individuals.

First Aid

First aid: eyes: flush with water for 15 minutes. Skin: wipe dry, then
wash with soap & water.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >600f; 316c
spec gravity: 0.928
solubility in water: insoluble
appearance and odor: tan colored, semi-fluid lubricant, agreeable odor.

Reactivity

Stability indicator/materials to avoid: yes

Proper Disposal

Waste disposal methods: manufacturer recommends controlled incineration.

disposal methods must be iaw federal, state & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum distillates
fraction by wt: unk

MSDS BFLRZ CHEMLUBE 303

Hazards

Effects of overexposure: repeated skin contact may produce irritation.

First Aid

First aid: eyes: immediately flush w/water at least 15 min. Call md if
necessary.

Chemical Properties

Hcc: v6
solubility in water: negligible
appearance and odor: white & semifluid

Reactivity

Stability indicator/materials to avoid: yes

Proper Disposal

Waste disposal methods: dispose in accordance w/local,state, and federal
regulations. Mfr suggests incineration.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lithium stearate percent: 8.0 + or - 0.3
cas: 4485-12-5
rtecs #: wi4370000

ingred name: bis (2-ethylhexyl) sebacate percent: 89.0 + or - 1.0
cas: 122-62-3
rtecs #: vs1000000

ingred name: diisopropyl phosphite percent: 1.0 + or - 0.2
cas: 1809-20-7
rtecs #: sz7660000

ingred name: 2,6-di-tert-butyl-p-cresol
cas: 128-37-0
rtecs #: go7875000
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3; 9192

ingred name: barium dinonylnaphthalene sulfonate perecnt: 1.5 + or - 0.3

MSDS BFLSB SA 827 3149,MIL-L-46000B

Hazards

Effects of overexposure: skin irrit on prolonged contact.Severe eye
burns. May cause resp irrit,dizz,nausea & loss of conscsn

First Aid

First aid: flush eyes immediately w/water @ least 15 min.Call md
immediately. Wash skin thoroughly w/soap & water. If overcome by
vapors,move from contaminated area.Immed call md. If ingested,do
not induce vomit ing.Call md immediately.

Chemical Properties

Hcc: v4
boiling pt: b.P. Text: 160f
spec gravity: 0.921
solubility in water: slight
appearance and odor: amber viscous liquid w/bland odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers such as: chromic acid,bromine,hydrogen perox
hazardous decomposition products: co,co*2

Proper Disposal

Waste disposal methods: dispose in accordance w/local,state, and federal
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: lithium stearate (specification requires 8.0% + or - 0.3)
cas: 4485-12-5
rtecs #: wi4370000

ingred name: bis (2-ethylhexyl) sebacate (specification requires 89.0% +
or - 1.0)
cas: 122-62-3
rtecs #: vs1000000

ingred name: diisopropyl phoshite (specification requires 1.0% + or -
0.2)
cas: 1809-20-7
rtecs #: sz7660000

ingred name: 2,6-di-tert-butyl-p-cresol
cas: 128-37-0
rtecs #: go7875000
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3; 9192

ingred name: barium dinonylnaphthalene sulfonate (spec requires 1.5% +
or - 0.3) see supp data

MSDS BFLSC P-LUBE 9870B

Hazards

Effects of overexposure: not expected to cause any ill effect except for
very sensitive individuals.

First Aid

First aid: eyes: flush with large amounts of water for 15 minutes. Skin:
wipe dry then wash with soap and water.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >600f,316c
spec gravity: 0.928
solubility in water: insoluble
appearance and odor: tan colored. Semi-fluid lubricant. Agreeable odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: combustion can produce smoke & oxides
of carbon & phosphorou

Proper Disposal

Waste disposal methods: mfr recommends controlled incineration. Waste
disposal method must be iaw federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: bis (2-ethylhexyl) sebacate
cas: 122-62-3
rtecs #: vs1000000
fraction by wt: 89%

ingred name: lithium stearate
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: 8%

ingred name: diisopropyl phosphite
cas: 1809-20-7
rtecs #: sz7660000
fraction by wt: 1%

ingred name: 2,6-di-tert-butyl-p-cresol
cas: 128-37-0
rtecs #: go7875000
fraction by wt: 0.5%
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3; 9192

ingred name: barium dinonylnaphthalene sulfonate
fraction by wt: 1.5%

MSDS BFLSD ANDEROL SYNTHETIC LUBRICATING GREASE

Hazards

Effects of overexposure: prlngd/rptd skin/eye cntct may cause irrit.

prlngd brthng of conc mist at high temp may irrit lungs.

First Aid

First aid: skin: wash w/soap & water. Eyes: flush immed w/plenty water
15 min. Inh: remove to fresh air. Mfr states low degree of haz for
this prod. Observe ordinary measures of personal hygiene.

Chemical Properties

Hcc: v6
solubility in water: negligible
appearance and odor: light to dark grease, slight mild odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidants,acids & bases. May soften plastic/paint.

hazardous decomposition products: burning may prod sm amts toxic fumes
or nitrogen oxides

Proper Disposal

Waste disposal methods: bury in apprvd landfill. Observe local, state,
fed reg. Do not contam any streams, lakes, ponds.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: no ingredient for this formulation_ingredient

MSDS BGXCZ BRAYCOTE 646

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: irritation of
eyes,redness,tearing,skin irritation,defating and respiratory
irritation. Chronic: irritation of skin,dermatitis,defatting.

explanation of carcinogenicity: per msds
effects of overexposure: see health hazards data.

medical cond aggravated by exposure: none known to mfr.

First Aid

First aid: eye: flush with plenty of water for about 15 minutes;seek
medical attention. Skin: do not use contaminated clothes;wash
thoroughly with soap & water. Inhalation: remove to fresh air;seek
medical help. In gestion: do not induce vomiting;consult a physician
immediately.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >600f/316c
spec gravity: 0.93
solubility in water: negligible
appearance and odor: tan semi-fluid compound,mild odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: smoke,fumes,co & co*2,minor amounts of
various hydro-carbons,oxides of sulfur.

Proper Disposal

Waste disposal methods: dispose of by method in compliance with
local,state and federal regulations for health,air and water
pollution.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: synthethic ester
other rec limits: 5mg/cum as oil mist

ingred name: diisopropyl hydrogen phosphite
cas: 1809-20-7
rtecs #: sz7660000
fraction by wt:

ingred name: other components (type not specified)

MSDS BHXYS ROYCO 46

Hazards

Ld50 lc50 mixture: tlv for oil mist is 5 mg/m3.

routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin, respiratory
& gi tracts. Acute- irritating to eyes and skin. May cause mild
skin sensitization. Inhalation of vapor (generated at high
temperatures only)/oil mist may cause m ild irritation of
respiratory tract. Low order of acute oral toxicity. Chronic- skin
sensitization (rashes).

explanation of carcinogenicity: none
effects of overexposure: irritation, nausea, skin sensitization
medical cond aggravated by exposure: persons with pre-existing skin
disorders or eye problems may be more susceptible to the effects of
this product.

First Aid

First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Provide oxygen if needed. Eyes: flush with water for 15
minutes, holding eyelids open. Skin: wipe off excess. Wash skin with
soap & water . Oral: do not induce vomiting. In general, no
treatment is necessary unless large quantities of product are
ingested. Get medical attention. Note to physician: emesis not
needed in most oils & grease

Chemical Properties

Hcc: v6
nrc/state lic num: not relevant
solubility in water: insoluble
appearance and odor: tan smi-fluid, slight odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: open flames, heat
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates & gases will evovle. Carbon monoxide & other
compd. May form.

Proper Disposal

Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations. Reuse is
recommended. Contains barium. Hazardous waste number: d005
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: synthetic ester/di(2-ethylhexyl) sebacate
cas: 122-62-3
rtecs #: vs1000000
fraction by wt: 80 - 90%
other rec limits: none recommended

ingred name: barium dinonyl-naphthalenesulfonate
cas: 25619-56-1
fraction by wt:
other rec limits: none recommended

ingred name: diisopropyl hydrogen phosphite
cas: 1809-20-7
rtecs #: sz6600000
fraction by wt:
other rec limits: none recommended

ingred name: other components
fraction by wt:
other rec limits: none recommended

MSDS BJNMJ BRAYCO 646;LUBRICATING PRODUCT

Hazards

Ld50 lc50 mixture: not given
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eyes- may cause mild irritation.

skin- prolonged or repeated contact may cause irritation,
defatting. Inhalation- may cause nasal/respiratory irritation,
dizziness. Ingestion- can cause gastro-i ntestinal irritation,
nausea, vomiting,diarrhea.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

effects of overexposure: eye irritation, redness, tearing, blurred
vision. Skin irritation, defatting, dermatitis. Respiratory/ nasal
irritation, dizziness, nausea, headache. Possibly unconsciousness,
asphyniation
medical cond aggravated by exposure: none known.

First Aid

First aid: inhalation: remove to fresh air. Give oxygen if deemed
necessary. Contact a physician. Eye: immediately flush with plenty
of waterfor 15 minutes. Contact a physician if irritation persists.

skin: wipe material from skin. Wash thoroughly with soap & water.

remove contaminated clothing & shoes. Ingestion: do not induce
vomit. Nothg by mouth if unconscious. Get medical attention
immediately.

Chemical Properties

Hcc: v6
nrc/state lic num: none
boiling pt: b.P. Text: >600f/316c
melt/freeze pt: m.P/f.P text: not given
vapor pres: not given
vapor density: not given
spec gravity: 0.93
evaporation rate & reference: not given
solubility in water: insoluble
appearance and odor: tan semi-fluid compound,mild odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: heat, ignition sources
hazardous decomposition products: smoke,fumes,co,co2,minor amount of
various hydrocarbons,oxides of sulfur.

Proper Disposal

Waste disposal methods: all recovered material should be packaged,
labelled, transported, and disposed of or reclaimed in conformance
with good engineering practices. Dispose in compliance with local,
state and federal regul ations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: diisopropyl hydrogen phosphite
cas: 1809-20-7
fraction by wt:
other rec limits: use 5 mg/m3 manufact

ingred name: other components (type not specified)
fraction by wt: >98% %
other rec limits: none specified

MSDS BNCFZ LSA LUBRICATING OIL, SEMIFLUID

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- may cause irritation of eyes,
skin, respiratory & g.I. Tracts. Cns effects like headache,
dizziness, nausea and vomiting. Redness of eyes/skin possible.

chronic: may cause drying of skin, defat ting or dermatitis.

effects of overexposure: may cause irritation of eyes, skin, respiratory
& g.I. Tracts. Cns effects like headache, dizziness, nausea and
vomiting. Redness of eyes/skin possible.

medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.

First Aid

First aid: get medical attention if symptoms persist. Skin: remove
excess. Wash skin with soap & water. Eye: flush with water for 15
minutes, holding eyelids open. Inhaled: remove to fresh air &
provide oxygen/cpr if needed. Oral: do not induce vomiting.Get
immediate medical attention.

Chemical Properties

Hcc: v6
spec gravity:
solubility in water: negligible
appearance and odor: amber color oil, mild odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents such as: h2o2,chromic acid, bromine
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: if combusted, co2, co, toxic
hydrocarbons, other toxic oxides

Proper Disposal

Waste disposal methods: keep in covered drums, pending disposal. Handle
& dispose in full compliance with all applicable international,
federal, state, & local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum oil
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist

ingred name: additives mixture(as detergents,dispersants,oxidation
inhibitor & corrosion inhibitors)

MSDS CCHTV MIL-L-46000C;PQ-9870B

Hazards

Ld50 lc50 mixture: tlv for oil mist is 5mg/m3
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: vapors from heating may cause
irritation.Skin: vapors from heating may cause irritation.Ingest: not
reported.Inhal: vapors from heating may cause respiratory
irritation.

explanation of carcinogenicity: none of the ingredients in this product
is listed by ntp, iarc or osha as a carcinogen.

effects of overexposure: inhal: nausea,vomiting.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: skin: remove contaminated clothing;wash with soap and
water.Eyes: flush with water for 15 minutes.Call physician if
irritation develops.Inhal: remove to fresh air.Give oxygen or
artificial respiration if needed.Ingest: do not induce vomiting.Get
prompt qualified medical attention.Note to physician: treat
symptomatically.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >660f,>349c
melt/freeze pt: m.P/f.P text: 340f,171c
vapor pres: non volatl
vapor density: not volatl
spec gravity:
evaporation rate & reference: not volatile
solubility in water: negligible
appearance and odor: semi-fluid grease.Slight,mild odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: unidentified toxic fumes.

Proper Disposal

Waste disposal methods: contact your local environmental officer.

dispose of in accordance with all federal,state and local
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: petroleum hydrocarbon
other rec limits: none recommended

MSDS CJPGM BRAYCOTE 646

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may cause eye irritation. Skin
contact: concentrate may cause skin irritation. Skin absorption: no
acute effects expected. Ingestion: this product may cause
gastrointestinal distress with sympto ms of nausea, vomiting,
diarrhea, and abdominal pain. inhalation: inhalation of high
concentrations of mists may produce irritation and damage to the
respiratory tract. Chronic effects: a review of the literature
does not show obvious long term hazard.

explanation of carcinogenicity: no components present in this product at
>0.1% is presently listed as a carcinogen by iarc, ntp or osha.

effects of overexposure: eye: irritation. Skin contact: irritation. Skin
absorption: no acute effects expected. Ingestion: gastrointestinal
distress, nausea, vomiting, diarrhea, and abdominal pain.

inhalation: irritation and damage to the respiratory tract.

First Aid

First aid: eye: flush with plenty of water for 15 minutes. Get medical
attention. Skin: wash with soap and water. Remove contaminated
clothing. Get medical attention if irritation persists. Use skin
cream for de fatted areas. Ingestion: aspiration hazard: do not
induce vomiting or give anything by mouth because this material can
enter the lungs and cause severe damage. Do not leave victim
unattended. If vomit ing occurs, or if comatosa or lethargic, place
on left side with head down. Get medical attention. Inhalation:
move to fresh air. If not breathing, give artificial respiration.

if breathing difficult, give oxygen. Get medical attention.

Chemical Properties

Hcc: v5
boiling pt: >315.6c, 600.F
melt/freeze pt: m.P/f.P text: n/d
vapor pres: n/d
vapor density: n/d
spec gravity: 60f (h20=1): 0.9300 +/-0.1
evaporation rate & reference: n/d
solubility in water: insoluble
appearance and odor: tan semi-fluid compound, mild odor
percent volatiles by volume: n/d

Reactivity

Pressure: no. Section 313 toxic chemicals: 25619-56-1. Barium
compounds.

federal regulatory information: u.S. Federal regulations: hazardous per
osha 29 cfr 1910.1200: yes. Cercla/epcra: section 302 extremely
hazardous substance (ehs): no listed ingredients are present on the
302 list. other u.S. Fede ral regulations: this product is a
mixture and is not listed in the tsca inventory. The individual
ingredients in the product are listed in the tsca inventory.

Proper Disposal

Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Dispose of this material to the land may be
banned by federal law (40 cfr 268). This product as purchased does
not fall under curren t u.S. Epa rcra definitions of hazardous
waste. It is generators responsibility to determine status of the
waste at time of disposal.

Ingredients List

Ingred name: naphthalenesulfonic acid, dinonyl-, barium salt
cas: 25619-56-1
minumum % wt: 1.

maxumum % wt: 5.

osha pel: 0.5 mg/m3twa
acgih tlv: 0.5 mg/m3 twa

MSDS CLGMN BRAYCOTE 646

Hazards

Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may cause eye irritation. Skin
contact: concentrate may cause skin irritation. Skin absorption: no
acute effects expected. Ingestion: this product may cause
gastrointestinal distress. Inhalation: inhalation of high
concentrations of mists may produce irritation and damage to the
respiratory tract. Chronic: a review of the literature does not
show obvious long term hazard.

explanation of carcinogenicity: no component known to be present in this
product at >0.1% is presently listed as a carcinogen by iarc, ntp,
or osha.

effects of overexposure: ingestion: symptoms of nausea, vomiting,
diarrhea, and abdominal pain.

First Aid

First aid: eye-immediately flush with plenty of water for 15 mins. Get
medical aid immediately. Skin-wash with plenty of soap & water.

remove contaminated clothing. Get medical aid if irritation
persists. Wash c lothing before reuse. Use skin cream for defatted
areas. Ingestion-aspiration hazard: do not induce vomiting or give
anything by mouth, material can enter the lungs & cause severe
damage. Do not leave unattended. If vomiting occurs, of if
comatosa or lethargic, place on the left side with the head down.

seek immediate medical aid. Inhalation-remove to fresh air. Give
artificial respiration or oxge n if not breathing. Get medical aid.

Chemical Properties

Hcc: n1
boiling pt: >315.6c, 600.F
melt/freeze pt: m.P/f.P text: not determined
vapor pres: nd
vapor density: nd
spec gravity: 0.9300 -/+0.1(h20=1)@60f
viscosity: not available
evaporation rate & reference: nd
solubility in water: insoluble
appearance and odor: tan semi-fluid, mild odor
percent volatiles by volume: nd

Reactivity

Chemicals: 25619-56-1. Barium compounds.

federal regulatory information: contains no other ingredients now known
to be hazardous as defined by osha. U.S. Federal regulations:
hazardous per osha 29 cfr 1910.1200: yes. Other u.S. Federal
regulations: this product is a mixt ure and is not listed in the
tsca inventory. The individual ingredients in the product are
listed in the tsca inventory.

Proper Disposal

Waste disposal methods: dispose of in accordance with local, state and
federal regulations. Dispose of this material to the land may be
banned by federal law (40 cfr 268).

Ingredients List

Ingred name: naphthalenesulfonic acid, dinonyl-, barium salt
cas: 25619-56-1
minumum % wt: 1.

maxumum % wt: 5.