Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Hydraulic Lubricating Oil

NSN: 9150-00-782-3946 | Model: NYOSILM25

A noncorrosive mineral, synthetic, or biobased oil with special oxidation resistant and rust-inhibiting additives for use in hydraulic systems, waterbury speed reducers, and plane lifts.

NSN Properties and Flags
NATO Stock Number
9150-00-782-3946
DEMIL
NO
Fatty Material Type
Any acceptable
Basic Ingredient
Silicone fluid and synthetic base
Lubricant Type
Any acceptable
Service Characteristics
Corrosion resistive and oxidation resistant
Quantity Within Each Unit Package
5.000 gallons
Viscosity At Rated Temp
3500.00 -65 degrees fahrenheit and 50.00 100 degrees fahrenheit and 60.00 100 degrees fahrenheit and 15.00 210 degrees fahrenheit and 19.00 210 degrees fahrenheit
Maximum Pour Point
-100.0 degrees fahrenheit
Minimum Flash Point And Test Method
550.0 degrees fahrenheit cleveland open cup

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 9150-00-782-3946 Datasheet

Supply Class (FSC):
Hydraulic Lubricating Oils And Greases: Cutting
Cross Reference:
  • NYOSILM25
  • MIL-S-81087
  • PCR 52M20
Cage Codes:
  • Nye Lubricants, Inc. (CAGE 98354)
  • Military Specifications (CAGE 81349)
  • Pcr Inc (CAGE 52921)
Schedule B & Trade:
  • Schedule B: 2710193080 (NAICS 324110)

    Lubricating oils with or without additives, nesoi

  • SITC: 33460

    Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes

  • End Use: 11120

    Petroleum products, other

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    145000 - Oil o/t petro lubricating noi

  • WCC:

    603 - Petroleum, lubricating or similar oils (other than bulk)

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.

  • LTL:

    W - Rating variable

  • TCC:

    Z - No special type of cargo code applicable

NSN Management Codes:
  • SOS
    Sms
  • AAC
    Y
  • Quantity per pack
    1
  • Unit of Measure
    Cn
  • Shelf Life
    N/A
  • Classification Control
    U
  • MGMT_CTL
    12b2--1
  • Repariability
    This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $4,189.73 to $6,982.89..
Does NSN 9150-00-782-3946 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Spain, Canada, New Zealand, Republic Of Korea, Italy, Greece, and Turkey
What is the NIIN of NSN 9150-00-782-3946?
007823946 or 00-782-3946
Does NSN 9150-00-782-3946 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 9150-00-782-3946?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 26, 1966
MSDS

Material Safety

MSDS BFPQW F50;SILICONE FLUID

Hazards

Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: mild irritation of eyes & skin.

chronic: no data available.

explanation of carcinogenicity: data per msds
effects of overexposure: see health hazards data.

First Aid

First aid: inhalation: remove to fresh air. Resuscitate if not breathing.

get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.

skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f/260c
vapor pres: 1.0 mm hg
vapor density: none
spec gravity: 1.025
evaporation rate & reference: >1.0,butyl acetate=1
solubility in water: negligible
appearance and odor: amber liquid,odorless
percent volatiles by volume:

Reactivity

Stability indicator/materials to avoid: yes
not specified
stability condition to avoid: extremely high temperatures
hazardous decomposition
products: co*2,co,sio*2,formaldehyde,chlorinated,benzenes.

Proper Disposal

Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: chlorophenylmethylsiloxycopolymer
cas: 68957-05-1
fraction by wt: 80-99%
other rec limits: none specified

ingred name: other components (type not specified)
other rec limits: none specified

MSDS BQKPW RHODORSIL FLUID 508 V 70

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact-may cause irritation.

explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.

effects of overexposure: none specified by manufacturer.

medical cond aggravated by exposure: none specified by manufacturer.

First Aid

First aid: eyes: flush with a large volume of water. Get medical
attention if irritation develops or persists. Skin: wash with soap
and a large volume of water. Seek medical attention if irritation
develops or p ersists. Inhalation: remove from area of exposuer.

seek medical attention as necessary. Ingestion: if conscious,
induce vomiting. Get medical attention.

Chemical Properties

Hcc: v6
spec gravity: 1.03
viscosity: 70 cst
solubility in water: insoluble
appearance and odor: clear-slightly yellow/odorless, liquid.

Reactivity

Stability indicator/materials to avoid: yes
mineral acids.

stability condition to avoid: very stable up to 300c and up to 350c for
short periods.

hazardous decomposition products: hcl, carbon oxides and silica emitted
on combustion.

Proper Disposal

Waste disposal methods: dispose of in accordance with applicable
federal, state and local regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: chlorophenylmethylpolysiloxane
fraction by wt: 100%
other rec limits: none recommended

MSDS BYBZH 52M20 CHLORINATED PHENYLMETHYLPOLYSILOXANE

Hazards

Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: not expected to pose any health
hazards when used under normal working conditions.

explanation of carcinogenicity: this item contains
hexachlorobenzene.

effects of overexposure: no data available. May cause mild skin & eye
irritation.

medical cond aggravated by exposure: no data available.

First Aid

First aid: inhalation-remove victim to fresh air. If breathing is
difficult administer oxygen. Consult a physician. Ingestion- get
medical attention. Eye contact-flush with water for at least 15
min. Obtain medi cal attention. Skin contact-wash with soap. Flush
with water for at least 15 min.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres: 1
vapor density: >1
spec gravity: 1.025
solubility in water: insoluble
appearance and odor: viscous liquid; no odor

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: silicon(iv) oxide,carbon monoxide,
carbon dioxide.

Proper Disposal

Waste disposal methods: incinerate in accordance with all regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: hexachlorobenzene (sara iii)
cas: 118-74-1
rtecs #: da2975000
fraction by wt:
other rec limits: none recommended
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs

MSDS BYCMG 52M20 CHLORINATED PHENYLMETHYLPOLYSILOXANE

Hazards

Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: not expected to pose any health
hazards when used under normal working conditions. Acute: may cause
mild skin and eye irritation. Chronic: none specified by
manufacturer.

explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.

effects of overexposure: eyes-redness, tearing, discomfort.

skin-redness, discomfort.

medical cond aggravated by exposure: no data available.

First Aid

First aid: eyes-flush with water for 15 minutes. Get medical attention.

skin-wash with mild soap & flush with water for 15 minutes.

inhaled-remove to fresh air. Administer oxygen or artificial
respiration as nee ded. Consult a physician. Ingested-get medical
attention.

Chemical Properties

Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres: 1 mm
vapor density: >1
spec gravity: 1.025
solubility in water: insoluble
appearance and odor: viscous liquid; no odor.

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: none specified by manufacturer.

hazardous decomposition products: silicon dioxide, carbon monoxide and
carbon dioxide.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: incinerate in accordance with local, state and
federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: polysiloxane (siloxanes and silicones, di-me, polymers with
tetrachlorophenyl silsesquioxanes)
cas: 68957-05-1
other rec limits: none recommended

ingred name: hexachlorobenzene (sara 313) (cercla)
cas: 118-74-1
rtecs #: da2975000
fraction by wt:
other rec limits: none recommended
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs

MSDS CLRDQ MYOSIL M25 (SEE SUPPL)

Hazards

Ld50 lc50 mixture: not provided
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: potential health effects: eye contact:
may cause irritation. Skin: repeated or prolonged skin contact may
cause irritation. Inhalation: oil mist and vapors at high
temperatures may irritate respirator y passages. Ingestion: may
cause gastrointestinal irritation. Primary routes of entry:
inhalation at high temperatures, eye contact, skin contact. Target
organs: respiratory passages at high temperatu res, eyes, skin.

explanation of carcinogenicity: iarc, ntp, and osha do not list nyosil
m25 or its ingredients as carcinogens.

effects of overexposure: eye contact: may cause irritation. Skin:
repeated or prolonged skin contact may cause irritation.

inhalation: oil mist and vapors at high temperatures may irritate
respiratory passages. Ingestion: may cause gastrointestinal
irritation.

medical cond aggravated by exposure: none known.

First Aid

First aid: eye contact: flush thoroughly with water for at least 15
minutes. Get immediate medical attention. Skin contact: remove
contaminated clothing. Wash exposed area with soap and water. Get
medical attent ion if symptoms persists. Inhalation: if symptoms
develop, remove affected person from sources of exposure into fresh
air. Get immediate medical attention. If person is not breathing,
give artificial respiration. If breathing is difficult, administer
oxygen if available. Ingestion: get immediate medical attention. Do
not induce vomiting unless instructed to do so by a physician.

Chemical Properties

Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: not volatile
melt/freeze pt: m.P/f.P text: not determined
decomp temp: decomp text: not provided
vapor pres: negligible
vapor density: n/d
spec gravity: 1.03 at 25c
viscosity: not provided
evaporation rate & reference: not determined
solubility in water: insoluble
appearance and odor: clear oil with slight odor.

percent volatiles by volume: none
corrosion rate: not provided

Reactivity

(40 cfr 372): no ingredients listed. Sara extremely hazardous
substances (40 cfr 355): no ingredients listed. Cercla hazardous
substances (40 cfr 302): no ingredient s listed.

federal regulatory information: tsca: all components of this product are
listed on the tsca inventory.

state regulatory information: not provided

Proper Disposal

Waste disposal methods: contact a licensed waste-disposal contractor for
detailed recommendations. Many states classify waste lubricants as
"hazardous", which means disposal only by a licensed firm. Follow
applicable federal , state, and local regulations.

Ingredients List

Ingred name: oil mist
other rec limits: niosh 5 mg/m3
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)