NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for lubrication of industrial types of equipment by means of cups, grease fittings, or pressure lubricating systems. If special characteristics are required, see specific item names.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $896.47 to $1,494.11.. | |
| Does NSN 9150-00-823-8047 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, National Aeronautics and Space Administration, Brazil, Spain, Australia, Canada, France, Republic Of Korea, Italy, Greece, and Turkey | |
| What is the NIIN of NSN 9150-00-823-8047? | |
| 008238047 or 00-823-8047 | |
| Does NSN 9150-00-823-8047 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-823-8047? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1962 | |
Effects of overexposure: none noted;may irritate eyes and skin on
prolonged contact.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
solubility in water: negligible
appearance and odor: grease for general purpose.
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: heat and open flames.
hazardous decomposition products: none noted
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum hydrocarbons (take tlv as oil mist=5mg/cum)
ingred name: clay
acgih tlv: not specified
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
Ld50 lc50 mixture: not available
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to eyes. Skin contact: prolonged or repeated contact may cause
various skin disorders such as dermatitis, folliculitis, oil acne.
release during high pressure usa ge may result in injection of oil
into skin causing local necrosis. Inhalation: not a relevant route
of exposure. However, under high temperature conditions, vapors are
irritating to nose, throat, and upper respiratory tract.
ingestion: no specific information identified. Chronic - product
has not been tested. Lubricating greases are generally considered
to be of a low order of acute toxicity to h umans and animals.
explanation of carcinogenicity: this product does not contain any
carcinogen identified by iarc, ntp, or osha. However the handling
procedures and safety precautions in this msds should be followed
to minimize employee's exposure.
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: preexisting eye and skin disorders
may be aggravated by exposure to this product.
First aid: eye contact: flush with water for 15 minutes while holding
eyelids open. Get medical attention. Skin contact: remove
contaminated clothing and wipe excess off. Wash skin with waterless
cleaner and/or soap and water. If irritation persists, get medical
attention. If material is injected under skin, get medical
attention promptly to prevent serious damage. Do not wait for
symptoms. Inhalation: remov e victim to fresh air and provide
oxygen if breathing is difficult. Get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is necessary
unless large quantities of product a re ingested. Get medical
advice.
Hcc: v6
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
vapor pres: not available
spec gravity: not available
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: black buttery grease - slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: heat, open flames
hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates and gases evolve when material undergoes
pyrolysis/combustion. Carbon monoxide and unidentified organic
compounds may be formed upon combustion.
conditions to avoid polymerization: will not occur
Waste disposal methods: contains barium. Under epa-rcra (40 cfr 261.24),
a waste is hazardous if it exhibits the characteristic of toxicity
based on an extracted value of >100 mg/l barium (waste number d005)
as measured by t oxicity characteristics leaching procedure (tclp).
alternatively, material may be recycled. Check lo cal and state
regulations.
Ingred name: solvent refined, residual oil
cas: 64742-57-0
minumum % wt: 70.
maxumum % wt: 80.
other rec limits: not provided
ingred name: organophilic clay
cas: 68953-58-2
rtecs #: uz2996400
minumum % wt: 10.
maxumum % wt: 15.
other rec limits: not provided
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
minumum % wt: 3.
maxumum % wt: 8.
other rec limits: not provided
ingred name: sodium nitrite
cas: 7632-00-0
rtecs #: ra1225000
< wt: 3.
other rec limits: not provided
epa rpt qty: 100 lbs
dot rpt qty: 100 lbs
ingred name: barium dinonylnaphthalene sulfonate
cas: 25619-56-1
< wt: 1.
other rec limits: not provided
ingred name: other additives
< wt: 10.
other rec limits: not provided
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause skin or eye
irritation on contact. Chonic: skin and eye irritation.
explanation of carcinogenicity: this material contains no ingredients of
0.1% or more concentration listed as a carcinogen or suspected
carcinogen.
effects of overexposure: eyes: redness, itching. Skin: redness, rash,
itching.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated on prolonged or repeated exposure.
First aid: inhalation: remove to fresh air. Eyes/skin: flush with large
amounts of water for 15 minutes. Ingestion: rinse mouth; get
medical attention for eyes, breathing difficulty, or other symptoms
of overexpo sure.
Hcc: v6
spec gravity: 0.924
solubility in water: negligible
appearance and odor: gray semi-solid grease,w/mineral oil odor.
Stability indicator/materials to avoid: yes
strong oxidizers such as chromic acid, hydrogen peroxide, and bromine.
stability condition to avoid: heat, ignition sources
hazardous decomposition products: incompletely burned carbon products,
and oxides of carbon.
Waste disposal methods: handle and dispose in full compliance with all
applicable international, federal, state, and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil (exposure regulated as 'oil mist') *
cas: 8012-95-1
rtecs #: py8030000
other rec limits: none specified
osha pel: 5 mg/m3 *
acgih tlv: 5 mg/m3/10 stel;9192
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt:
other rec limits: none specified
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
ingred name: non-soap thickener
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is > 10,000 mg/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- eye/skin: no significant
irritation expected. Inhalation: none expected under normal
conditions of use. Ingestion: expected to be relatively non-toxic.
chronic- none known.
effects of overexposure: no significant irritation expected.
medical cond aggravated by exposure: persons with pre-existing skin
disorders may be more susceptible to the effects of the substance.
First aid: get medical help if symptoms persist. Inhalation: remove to
fresh air. Eyes: flush with water for 15 minutes, holding eyelids
open. Skin: wash with soap & water. Ingestion: if a large amount is
swallo wed, induce vomiting and get medical attention.
Hcc: v6
solubility in water: negligible
appearance and odor: smooth textured grease; green color; slight odor
Stability indicator/materials to avoid: yes
none identified
stability condition to avoid: heat, open flames
hazardous decomposition products: carbon monoxide, carbon dioxide and
other harmful compounds
Waste disposal methods: dispose of in compliance with all applicable
local, state and federal laws and regulations. Rcra emergency
number: 800-424-9346.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydrofinished,solvent refined paraffinic petroleum oil
ingred name: organic polyurea thickener.
ingred name: teflon (tetrafluoro ethylene polymer)
cas: 116-14-3
rtecs #: kx4025000
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: low health hazards;may cause
irritation of eyes,skin,respiratory or g.I.Tracts;chronic: no data
available.
explanation of carcinogenicity: data per msds
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: none noted
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.
skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
boiling pt: b.P. Text: 700f,371c
spec gravity: 0.89
solubility in water: negligible
appearance and odor: dark gray grease. Bland odor.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide and
other unidentified components.
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: urea-ditallow alkyl derivs
cas: 67774-69-0
fraction by wt: 12.0%
other rec limits: none specified
ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 24.9%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: solvent,dewaxed residual oil (petroleum)
cas: 64742-62-7
fraction by wt: 50.6%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: zinc diathiophosphate
cas: 68457-79-4
fraction by wt: 3.0%
other rec limits: none specified
ingred name: calcium sulfonate
cas: 68783-96-0
fraction by wt: 4.0%
other rec limits: none specified
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 5.0%
other rec limits: none specified
ingred name: anti-oxidant
cas: 41484-35-9
fraction by wt: 0.5%
other rec limits: none specified
Ld50 lc50 mixture: tlv for oil mist is 5 mg/m3.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eyes, skin,
gastrointestinal tract. Acute- eyes: can cause irritation, redness,
blurred vision. Skin: prolonged contact can cause irritation,
dermatitis. Oral: can cause gastrointestinal ir ritation, nausea,
vomiting and diarrhea. Chronic- dermatitis.
explanation of carcinogenicity: antimony trioxide is suspected human
carcinogen (acgih). Iarc: antimony compounds has caused lung tumors
in animal (msds)
effects of overexposure: eye irritation, redness, blurred vision; skin
irritation, dermatitis; gastrointestinal irritation, nausea,
vomiting and diarrhea
medical cond aggravated by exposure: personnel with pre-existing skin
disorders should avoid contact with this product.
First aid: get medical help if symptoms persist. Inhaled: not likely.
eyes: flush with water for 15 minutes, holding eyelids open.
skin: wash with soap & water. Oral: do not induce vomiting. Keep
warm. Get medical a ttention. If vomiting occurs spontaneously,
keep head below hips to prevent aspiration of liquid into the
lungs.
Hcc: t6
nrc/state lic num: not relevant
boiling pt: b.P. Text: unknown.
melt/freeze pt: m.P/f.P text: >500f,>260c
vapor pres: unknown.
vapor density: >1
spec gravity: 0.876
evaporation rate & reference:
solubility in water: nil
appearance and odor: gray/black paste, charactersitic petroleum odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: open flame
hazardous decomposition products: irritating and/or toxic fumes
including oxides of carbon, sulfur, and nitrogen may be released.
Waste disposal methods: dispose of waste in a chemical landfill as
approved by current local, state and fedral laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: antimony trioxide (sara iii)
cas: 1309-64-4
rtecs #: cc5650000
fraction by wt:
other rec limits: none recommended
osha pel: 0.5 mg/m3 (sb)
acgih tlv: 0.5 mg sb/m3; 9293
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: secret
other rec limits: none recommended
osha pel: 10 mg mo/m3
acgih tlv: 10 mg mo/m3
ingred name: acetone (sara iii)
cas: 67-64-1
rtecs #: al3150000
fraction by wt:
other rec limits: none recommended
osha pel: 1000ppm
acgih tlv: 750ppm/1000stel;9394
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: naphthenic oils (severely hydrotreated)
fraction by wt: secret
other rec limits: none recommended
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist