NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $41.31 to $68.85.. | |
| Does NSN 9150-00-935-4018 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Defense Threat Reduction Agency, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, U.s. Coast Guard, National Weather Service, Hungary, Poland, Czech Republic, Brazil, Spain, Singapore, Canada, New Zealand, Germany, Republic Of Korea, United Kingdom, Philippines, Portugal, Italy, Norway, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 9150-00-935-4018? | |
| 009354018 or 00-935-4018 | |
| Does NSN 9150-00-935-4018 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-935-4018? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jun 06, 1967 | |
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause irritation to skin,
eyes. Ingestion: may lead to vomiting, gastric upset. Chronic:
repeated and/or prolonged skin contact may cause dermatitis. May
cause mild skin sensitization.
effects of overexposure: inhalation: not expected route of entry.Under
high temperature conditions,vapors may irritate nose and throat.
eyes: may cause mild irritation on contact. Skin: components are
unlikely to be absorbed thr ough skin.Prolonged/repeated contact
may cause dermatitis, folliculitis or oil acne. Ingestion: no
specific information.
medical cond aggravated by exposure: pre-existing eyes and skin disorder
may be aggravated to exposure to this product.
First aid: inhalation: remove to fresh air. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with soap and water. Remove contaminated clothing. If
irritation per sists, get medical attention. Ingestion: do not
induce vomiting. In general, no treatment is required. Get medical
advice.
Hcc: v6
solubility in water: negligible
appearance and odor: dark brown liquid (semi solid)
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: sulfur oxides and hydrogen sulfide,
both of which are toxic, may be released upon combustion.
Waste disposal methods: incinerate in approved incinerator or dispose of
in approved chemical dump in accordance with local,state & federal
regulations.Should not contaminate drainage systems,rivers or
waterways.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: adipic acid; diisooctyl ester; dicarboxylic ester
cas: 1330-86-5
fraction by wt: 68-80%
other rec limits: none specified
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 10-20%
other rec limits: none specified
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt:
other rec limits: none specified
ingred name: antimony dialkyldithiocarbamate
cas: 15991-76-1
fraction by wt:
other rec limits: none specified
ingred name: p,p'-dioctyldiphenylamine
cas: 101-67-7
rtecs #: jj8850000
fraction by wt:
other rec limits: none specified
ingred name: minor additives
fraction by wt:
other rec limits: none specified
ingred name: additive containing potassium triborate
fraction by wt:
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin. Acute-
eye: direct contact may irritate slightly. Skin: prolonged/repeated
contact may cause irritation. Injection under skin causes local
necrosis. Inhale/oral: no adverse effec ts expected. If more than
several mouthfuls are swallowed, abdominal discomfort, diarrhea may
occur. Chronic- dermatitis
explanation of carcinogenicity: none.
effects of overexposure: irritation, redness, swelling, tissue damage,
nausea, vomiting, dermatitis
medical cond aggravated by exposure: individuals with pre-existing skin
disorders may be more succeptible to the effects from exposure to
this product.
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes. Hold eyelids open.
skin: wipe off excess & wash skin with soap & water or waterless
cleaner. If injected under skin, regardless of its size, contact a
physician immediately. Delay may cause loss of affected part of
body. Oral: do not induce vomiting. If large amounts are swallowed,
call doctor.
Hcc: v6
nrc/state lic num: not relevant
spec gravity: 0.89
evaporation rate & reference: not relevant
appearance and odor: black grease - hydrocarbon odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: flame
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates & gases will evovle. Carbon monoxide & other
compd. May form.
Waste disposal methods: dispose of in accordance with local state and
federal regulations. Product is an oil. Spills to us surface waters
or watercourse or sewer that cause a visible sheen must be reported
to the national re sponse center, 800-424-8802.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester
cas: 1330-86-5
fraction by wt: 70 - 80%
other rec limits: none recommended
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 3 - 7%
other rec limits: none recommended
osha pel: 10 mg mo/m3
acgih tlv: 10 mg mo/m3
ingred name: calcium acetate
cas: 62-54-4
rtecs #: af7525000
fraction by wt:
other rec limits: none recommended
ingred name: lithium 12 hydroxystearate/lithium hydroxystearate
cas: 7620-77-1
fraction by wt: 10 - 15%
other rec limits: none recommended
ingred name: other components
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: may be mildly irritating to the
eyes. Skin: prolonged or repeated contact may cause various skin
disorders such as dermatitis, folliculitis or oil acne. High
pressure release may result in injec tion of grease into the skin
causing local necrosis. Inhalation and ingestion: no specific
information identified.
explanation of carcinogenicity: data per msds
effects of overexposure: eyes: mild irritation. Skin: see health hazards
data. Local necrosis is evidenced by delayed onset of pain and
tissue damage a few hours following injection.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: eyes: flush with large amounts of water. Get medical
attention if irritation persists. Skin: remove contaminated
clothing. Wash area with soap and water. Get medicalattention if
irritation persists. I nhalation: move to fresh air. Give cpr if
not breathing. If breathing difficult give oxygen. Get medical
attention. Ingestion: do not induce vomiting. Get medical
attention.
Hcc: v6
solubility in water: insoluble
appearance and odor: dark grey, smooth, slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open
flames.
hazardous decomposition products: carbon monoxide, carbon dioxide and
other unidentified organic compounds may be formed upon combustion.
Waste disposal methods: contact your local environmental officer.
dispose of waste in accordance with local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diester fluid
cas: 103-24-2
rtecs #: cm2000000
fraction by wt: 82.0%
other rec limits: none specified
ingred name: bentonite
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: 6.0%
other rec limits: none specified
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 5.0%
other rec limits: none specified
osha pel: 5 mg mo/m3
acgih tlv: 5 mg mo/m3
ingred name: fatty acid amides
cas: 68910-93-0
fraction by wt: 3.0%
other rec limits: none specified
ingred name: unidentified components
fraction by wt: 4.0%
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye-slight eye irritation.
inhalation-may cause pulmonary irritation. Chronic: skin-can cause
dermatitis, folliculitis or oil acne. Inhalation-may produce
chemical pneumonitis.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: inhalation may cause dizziness and nausea.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with water for 15 minutes. If symptoms occur,
call physician. Skin: wash with soap and water. Remove contaminated
clothing. If symptoms occur, call physician. Inhalation: move to
fresh air . If not breathing, give cpr. Immediately call a
physician. Ingestion: not expected to be acutely toxic. If large
amounts are swallowed, call a physician.
Hcc: v6
boiling pt: b.P. Text: >1000f,>538
vapor pres: 15 mmhg
spec gravity: 0.90
solubility in water: negligible
appearance and odor: brown liquid, hydrocarbon odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: heat and open flames.
hazardous decomposition products: carbon monoxide & dioxide; aldehydes;
hydrocarbons; nitrogen, sulfur & phosphorus oxides; hydrogen
chloride & sulfide.
Waste disposal methods: dispose of clean up material in accordance with
applicable federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: blended mineral oil, unspecified
fraction by wt: 93%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: 100 ppm
ingred name: (severely solvent refined parafin base stock) &
(sulfur/phosphorus extreme pressure & acrylic copolymer) additives
fraction by wt: 7%
other rec limits: none specified
Ld50 lc50 mixture: tlv for oil mist is 5 mg/m3.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin. Acute-
eye: may be irritating. Skin: prolonged/repeated contact may cause
dermatitis. Injection under skin causes local necrosis. Inhale: no
adverse effects expected. However, va pors produced at high
temperatures may cause irritation. Oral: unknown. Chronic-
dermatitis.
explanation of carcinogenicity: none.
effects of overexposure: irritation, redness, swelling, tissue damage,
nausea, vomiting
medical cond aggravated by exposure: individuals with pre-existing skin
disorders may be more succeptible to the effects from exposure to
this product.
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes. Hold eyelids open.
skin: wipe off excess & wash skin with mild soap & water or
waterless cleaner . If injected under skin, regardless ofits size,
contact a physician immediately. Delay may cause loss of affected
part of body. Oral: do not induce vomiting. Call physician.
Hcc: v6
nrc/state lic num: not relevant
appearance and odor: dark brown liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat, flame
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of antimony, sulfur, nitrogen and other organic compounds
may be formed.
Waste disposal methods: dispose of in accordance with all local, state
and federal regulations. This product is an oil. Spills into or
leading to surface water that cause a sheen must be reported to the
national response cen ter, 800-424-8802.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic oil
fraction by wt: 65 - 80%
other rec limits: none recommended
ingred name: lithium hydroxystearate
cas: 7620-77-1
fraction by wt: 10 - 20%
other rec limits: none recommended
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 5 - 10%
other rec limits: none recommended
osha pel: 10 mg mo/m3
acgih tlv: 10 mg mo/m3
ingred name: antimony dialkyldithiocarbamate
cas: 15991-76-1
fraction by wt:
other rec limits: none recommended
osha pel: 0.5 mg sb/m3
acgih tlv: 0.5 mg sb/m3
ingred name: minor additive
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: no data provided by responsible party.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may be mildly irritating to the
eyes. Inhalation: no specific information identified. Ingestion: no
specific information identified. Skin: prolonged or repeated
contact may cause various skin dis orders such as dermatitis,
follicultitis or oil acne. Release during high pressure usage may
result in injection of grease into the skin causing local necrosis.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by iarc, ntp or osha.
effects of overexposure: irritation as noted in health hazard section.
local necrosis is evidenced by delayed onset of pain & tissue
damage a few hours following injection.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: eye: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin: remove contaminated clothing &
wipe excess off. Wash with soap & water or a waterless hand cleaner
followe d by soap & water. Do not reuse clothing until thoroughly
cleaned. If irritation persists, get medical attention. If material
is injected unter the skin, get medical attention promptly to
prevent seri ous damage. Do not wait for symptoms to develop.
inhalation: remove victim to fresh air & provide oxygen if
breathing is difficult. Get medical attention. Ingestion: do not
induce vomiting (suppl)
Hcc: v5
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
vapor pres: not available
spec gravity: not available
ph: none provided
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: dark grey, smooth, slight odor
Strong oxidizing agents.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates & gases will evolve when this material
undergoes pyrolysis. Carbon monoxide & unidentified organic
compounds may be formed upon combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: if this product becomes a waste, it would not be
a hazardous wastee by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local regulations.
Ingred name: synthetic ester or azelaic acid di(2-ethylhexyl) ester
cas: 103-24-2
rtecs #: cm2000000
= wt: 82.
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
= wt: 5.
ingred name: inorganic clay or bentonite
cas: 1302-78-9
rtecs #: ct9450000
= wt: 6.
ingred name: fatty acid amides or fatty acids, tall-oil, reaction
products with polyethylenepolyamines
cas: 68910-93-0
= wt: 3.
ingred name: other components
= wt: 4.
Ld50 lc50 mixture: not available
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may be slightly irritating. Skin:
prolonged or repeated contact may cause various skin disorders such
as dermatitis., follicultis or oil acne. Release during high
pressure usage may result in inj ection of oil into the skin
causing local necrosis. Inhalation: no specific information
identified. Ingestion: no specific information identified.
explanation of carcinogenicity: this product does not contain an
carcinogen identified by iarc, ntp or osha.
effects of overexposure: irritation as noted in health hazards. Local
necrosis is evidenced by delated onset of pain and tissue damage a
few hours following injection
medical cond aggravated by exposure: preexisting eye & skin disorders
may be aggravated by exposure to this product.
First aid: eye: flush with water for 15 mins while holding eyelids open.
get medical attention. Inhalation: remove victim to fresh air &
provide oxygen if breathing is difficult. Get medical attention.
ingestion : do not induce vomiting. In general, notreatment is
necessary unless large quantities of product are ingested. However,
get medical advice. Skin: remove contaminated clothing & wipe
excess off. Wash with soap & water or a waterless hand cleaner
followed by soap & water. Do not reuse clothing until thoroughly
cleaned. If irritation persists, get medical attention. (suppl)
Hcc: v6
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
vapor pres: not available
spec gravity: 0.89
ph: none provided
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: smooth buttery black grease: hydrocarbon odor
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat, flame.
hazardous decomposition products: carbon monoxide and other unidentified
organic compounds may be formed upon combustion.
conditions to avoid polymerization: will not occur
Waste disposal methods: place in an appropriate disposal facility in
compliance with local regulations.
Ingred name: synthetic esteradipic acid, diisooctyl ester
cas: 1330-86-5
minumum % wt: 70.
maxumum % wt: 80.
ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
minumum % wt: 3.
maxumum % wt: 7.
ingred name: gray acetate
cas: 62-54-4
rtecs #: af7525000
< wt: 3.
ingred name: lithium hydroxystearate
cas: 7620-77-1
minumum % wt: 10.
maxumum % wt: 15.
ingred name: other components
< wt: 5.