NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A noncorrosive mineral oil with special oxidation resistant and rust-inhibiting additives for lubrication of turbines.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating oils with or without additives, nesoi
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $57.63 to $96.05.. | |
| Does NSN 9150-00-942-9343 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Poland, Malaysia, Republic Of Korea, Italy, and Turkey | |
| What is the NIIN of NSN 9150-00-942-9343? | |
| 009429343 or 00-942-9343 | |
| Does NSN 9150-00-942-9343 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-942-9343? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Feb 09, 1966 | |
Effects of overexposure: eyes: minor irrit;skin: irritation on prolonged
contact;inhal: resp.Tract irrit,cough,pulmonary edema.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
spec gravity: 0.88
viscosity: 89.9 cst
solubility in water: negligible
appearance and odor: clear,pale yellow oil
Stability indicator/materials to avoid: yes
strong oxidizing materials.
stability condition to avoid: heat & light
hazardous decomposition products: combustion: co*2,h*20,co
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: highly refined base oils,cas#64742-65-0 (take tlv as oil
mist=5mg/cum)
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: >99%
acgih tlv: 5mg/cum(oilmist
ingred name: additives (antioxidants,detergent,pressure carrier,defoamer
& antirust)
fraction by wt:
acgih tlv: not specified
Ld50 lc50 mixture: oral ld50 (rat) is >5g/kg
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: prolonged or repeated skin contact may
cause skin irritation.
effects of overexposure: prolonged or repeated skin contact may cause
skin irritation, remove skin oils, and possibly leading to
dermatitis. However, material is neither corrosive nor an irritant.
may cause eye irritation. Mi nute amounts aspirated into the lungs
during ingestionor vomiti may cause mild/severe pulmonary
injury/death.
medical cond aggravated by exposure: none recognized.
First aid: eye-flush with clear water for 15 minute or until irritation
subsides. If irritation persists, call a physician. Skin-remove any
contaminated clothing & wash thoroughly with soap and water.
inhalation -vapor inhalation is normally not a problem. If overcome
from hot product, remove to fresh air & get medical attention.
ingested-do not induce vomiting. Call a physician immediately.
Hcc: v6
boiling pt: b.P. Text: 555f,291c
melt/freeze pt: m.P/f.P text: 14f,-10c
vapor pres:
vapor density: >5.0
spec gravity: 0.88
ph: 7
evaporation rate & reference:
solubility in water: negligible
appearance and odor: clear liquid, light yellow color. Faint petroleum
hydrocarbon odor.
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidants such as liquid chlorine, concentrated oxygen, sodium
hypochlorite or calcium hypochlorite.
stability condition to avoid: heat, sparks, flames.
hazardous decomposition products: fumes, smoke, carbon monoxide, oxides
of sulfur, aldehydes ect.
Waste disposal methods: dispose of collected material in accordance with
local state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lubricating oil base stock
cas: 64742-54-7
fraction by wt: >95%
other rec limits: 5 mg/m3 (mist in air
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: triorthocresyl phosphate
cas: 78-30-8
rtecs #: td0350000
fraction by wt:
osha pel: s, 0.1 mg/m3
acgih tlv: s, 0.1 mg/m3; 9192
ingred name: additives (propietary mixture)
fraction by wt:
other rec limits: not specified
Routes of entry: inhalation: no skin: unknown ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: no health hazard specified by
manufacturer.
effects of overexposure: may irritate eyes,skin and resiratory
tract.Prolonged contact on skin causes dermatitis.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with plenty of water for at least 15 minutes.
skin: wash with soap and water. Inhalation: remove to fresh air.
ingestion: see doctor.
Hcc: v6
boiling pt: b.P. Text: >600f/316c
vapor pres:
vapor density:
spec gravity:
evaporation rate & reference:
solubility in water: negligible
appearance and odor: amber lubricant. No odor.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong acids, alkalies and oxidizers.
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: nitric acid, carbon monoxide, carbon
dioxide, dense carbonaceous smoke.
Waste disposal methods: consult local authorities.Disposal must be in
accordance with local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum oil
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additives
other rec limits: none specified
Effects of overexposure: minimal transient eye irritation. Dermal ld50>8
g/kg of rabbit bodyweight. See supp data.
First aid: if ingested,give liquids;induce vomiting.Call md. Immediately
flush eyes w/water @ least 15 min. Wash skin w/soap & water until
no odor remains.Remove contaminated clothing & launder before use.
if in haled,remove victim to fresh air.
Hcc: v6
vapor density: >15
spec gravity: 0.88
evaporation rate & reference: 1000x < ethyl ethr
solubility in water: negligible
appearance and odor: dark amber fluid,slight odor
Stability indicator/materials to avoid: yes
strong oxidizers may ignite this material
hazardous decomposition products: co,trace oxides of phosphorus &
asphyxiats.
Waste disposal methods: mfr suggests incinerate. Dispose in accordance
w/local, state, and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: solvent refined paraffinec oils
fraction by wt: 98.6%
acgih tlv: 5 mg/cum (mists
ingred name: extreme pressure additive
fraction by wt: 1.4%
acgih tlv: 5 mg/cum (mfr)
Effects of overexposure: slight skin & eye irritation.
First aid: eyes: flush with water for 15 minutes. Skin: remove oil by
wiping or applying waterless hand cleaner, followed by washing with
soap & water.
Hcc: v6
spec gravity: 0.88
evaporation rate & reference: < 0.01 (buac=1)
solubility in water: insoluble
appearance and odor: light colored liquid, slight odor
Stability indicator/materials to avoid: yes
hazardous decomposition products: co & unidentified oxygenates during
combustion.
Waste disposal methods: manufacturer recommends controlled burning.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil (exposure regulated as 'oil mist')
cas: 8012-95-1
rtecs #: py8030000
fraction by wt: >99%
osha pel: 5 mg/m3
acgih tlv: 5 mg/m3/10 stel;9192
ingred name: antioxidant-when combined w/ antirust forms
ingred name: antirust agent (type not specified)
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may be mildly irritating to
eyes and skin. Inhalation: vapors generated at high temperature and
oil mist may irritate mucous membranes of respiratory tract.
ingestion: low level of toxicity. May irritate to digestive track.
chronic: prolonged/repeated skin contact can cause dermatitis,
folliculitis or oil acne.
effects of overexposure: ingestion: may cause gastrointestinal tract
irritation,nausea,vomiting & diarrhea. Eyes: may cause irritation or
redness/tears. Skin: prolonged or repeated contact may cause
irritation, dermatitis,follic ulitis, or oil acne;
inhalation: exposure to vapors generated by heat may irritate mucous
membranes of respiratory tract.
medical cond aggravated by exposure: pre-existing eyes and skin disorder
may be aggravated by exposure to this product.
First aid: skin: remove contaminated clothing.Wash with soap and
water.Call a physician if irritation persists. Inhalation: remove
to fresh air & restore breathing if necessary.Call a physician.
eyes: immediatel y flush with water for 15 minutes whileholding
eyelids open.Get medical help. Ingestion: immediately call a
physician.Do not induce vomiting.Give water if conscious. Nothing
by mouth if unconscious.
Hcc: v6
melt/freeze pt: m.P/f.P text: pour pt: 10f
spec gravity: 0.8805
viscosity: 75cs @40c
solubility in water: negligible
appearance and odor: pale yellow oil. Slight hydrocarbon odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: heat, open flames
hazardous decomposition products: combustion products: may evolve carbon
monoxide and other unidentified organic compounds may be formed
upon combustion.
Waste disposal methods: incinerate or dispose of collected material in
accordance with local,state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: distillates, hydrotreated heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: >99.0%
other rec limits: none specified
osha pel: 300 ppm
acgih tlv: 300 ppm
ingred name: minor additives
fraction by wt:
other rec limits: none specified
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: eye: lubricating oils are generally
considered to be no more than minimally irrit to eyes. Skin:
lubricating oils are generally considered to be no more than
slightly irrit to skin. Prlng & rptd cont may result in skin
disorders such as dermat, oil acne or folliculitis. Accidental
release under high press (supp data)
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: irritation as noted above. Necrosis may be
evidenced by delayed onset of pain and tissue damage a few hours
following high pressure injection.
medical cond aggravated by exposure: preexisting skin and respiratory
disorders may be aggravated by exposure to this product.
First aid: eye: flush w/water for at least 15 min while holding lids
open. Get md. Skin: remove contam clthg & wipe excess off. Wash
w/soap & water or a waterless hand cleaner followed by soap &
water. If irrit occurs, get md. If matl is injected under skin,
get md immed to pvnt serious dmg; do not wait for symptoms to
develop. Inhal: remove victim to fresh air & provide oxygen if
brthg is dfclt. (see ing 3)
Hcc: v6
melt/freeze pt: m.P/f.P text: 10f,-12c
spec gravity: 0.8805
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: pale yellow oil. Slight hydrocarbon odor.
Stability indicator/materials to avoid: yes
none specified by manufacturer.
stability condition to avoid: avoid heat, open flames, and oxidizing
materials.
hazardous decomposition products: therm decomp prods are highly
dependent on combust cndtns. A complex mixture of airborne solid,
liquid, (see supp data)
Waste disposal methods: place in an appropriate disposal facility in
compliance with local regulations. Dispose in accordance with
federal, state and local regulations .
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillates, hydrotreated heavy
paraffinic (distillates, hydrotreated heavy paraffinic)
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 99%
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3;10 mg/m3stel
ingred name: minor additives
fraction by wt:
ingred name: emer first aid: get md. Ingest: do not induce vomit. In
gen, no treatment is nec unless lrg qtys of prod are (see ing 4)
rtecs #: 9999999zz
ingred name: ing 3: ingested. However, get md. Note to physician: in
gen, emesis induction is unnecessary in high (see ing 5)
rtecs #: 9999999zz
ingred name: ing 4: viscosity, low volatility prods, i.E., most oils &
greases. Spill proc: pump to storage/salvage (see ing 6)
rtecs #: 9999999zz
ingred name: ing 5: vessels. Soak up residue w/absorbent such as clay,
sand or other suitable matl; dispose of properly. (see ing 7)
rtecs #: 9999999zz
ingred name: ing 6: flush area w/water to remove trace residue. Sm
spills: take up w/absorb matl & dispose of properly. (see ing 8)
rtecs #: 9999999zz
ingred name: ing 7: this prod is classified as an oil under section 311
of clean water act. Spills entering (a) surface (see ing 9)
rtecs #: 9999999zz
ingred name: ing 8: waters or (b) any watercourses or sewers
entering/leading to surf waters that cause a sheen must be (see ing
10)
rtecs #: 9999999zz
ingred name: ing 9: rptd to national response ctr, 800-424-8802. Supp
data: in injection of oil into skin causing local (see ing 11)
rtecs #: 9999999zz
ingred name: ing 10: necrosis. Inhal: inhal of vaps (generated at high
temps only) or oil mist may cause a mild irrit of (see ing 12)
rtecs #: 9999999zz
ingred name: ing 11: the upper resp tract. Ingest: lubricating oils are
generally considered no more than slightly toxic (see ing 13)
rtecs #: 9999999zz
ingred name: ing 12: if swallowed.
rtecs #: 9999999zz
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: ingestion: low toxicity. May
cause vomiting and diarrhea.Small amount aspirated into lungs will
cause lung injury. Inhalation: inhalation of mist/vapors/fumes may
cause respiratory tract irritatio n. Eye: irritation. Skin: repeated
contact may cause irritation. Chronic: none anticipated.
explanation of carcinogenicity: the components of this product have not
shown any evidence of being carcinogenic.
effects of overexposure: skin, eye and respiratory irritation., vomiting
and diarrhea.
medical cond aggravated by exposure: persons with a skin and pulmonary
disorders should use caution when handling or using this product.
First aid: skin: remove contaminated clothing. Wash with soap and water.
get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.
eye: i mmediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.
Hcc: v6
spec gravity: 0.885
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide and carbon dioxide
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 95-99.9%
other rec limits: none specified by m.
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 (oil mist)
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- oral: low toxicity. May cause
vomiting & diarrhea. Small amount aspirated into lungs will cause
lung injury. Inhalation: mist/vapors/fumes may cause respiratory
tract irritation. Eye: may cause ir ritation. Skin: repeated contact
may cause irritation. Chronic: none known.
effects of overexposure: orally may cause vomiting & diarrhea. Small
amount aspirated into lungs will cause lung injury. Inhalation of
mist/vapors/fumes may cause respiratory tract irritation. Contact
with eyes may cause irri tation. Repeated skin contact may
causeirritation.
medical cond aggravated by exposure: pre-existing skin disorders may be
more susceptible to this material.
First aid: get medical attention if symptoms persist. Skin: remove
excess. Wash skin with soap & water. Eye: flush with water for 15
minutes, holding eyelids open. Inhaled: remove to fresh air &
provide oxygen/cpr if needed. Oral: do not induce vomiting.Get
immediate medical attention.
Hcc: v6
spec gravity:
solubility in water: negligible
appearance and odor: oil - petroleum odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide and carbon dioxide
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
other rec limits: none specified by m.
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 (oil mist)
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: unknown iarc: unknown osha: no
health hazards acute and chronic: acute: inhalation of vapors may cause
respiratory irritation. Contact with skin and eye may cause mild
irritation. Swallowing may cause mild gi tract disturbace. High
pressure injection may cause necr osis of skin. Chronic: prolonged
or repeated exposure may cause dermatitis.
explanation of carcinogenicity: none
effects of overexposure: inhaled: coughing, shortness of breath. Eyes:
redness, discomfort. Skin: redness, discomfort. Necrosis may be
evidenced by delayed onset of pain and tissue damage a few hours
following high pressure i njection. Ingested: nausea, diarrhea.
medical cond aggravated by exposure: preexisting skin and respiratory
disorders may be aggravated by exposure to this product.
First aid: inhaled: move to fresh air. Give respiratory support as
needed. Eyes: flush with lots of water, hold lids open. See doctor.
skin: remove contaminated clothes. Wash skin with soap and water.
ingested: do not induce vomiting! Get medical attention.
Hcc: v6
melt/freeze pt: m.P/f.P text: 10f,-12c
spec gravity: 0.88 (water=1)
viscosity: 75 cst @ 40c
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: pale yellow oil. Slight hydrocarbon odor.
Stability indicator/materials to avoid: yes
none specified by manufacturer.
stability condition to avoid: avoid heat, open flames, and oxidizing
materials.
hazardous decomposition products: depends on conditions of combustion.
complex mixture of particles, gases and fumes. Oxides of carbon may
be formed.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: distillates, hydrotreated heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 99%
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm
ingred name: minor additives
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) is >5.00 g/kg
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes-irritation & temporary
discomfort. Skin-defatting of skin or irritation, mild discomfort.
inhalation-irritation of the nose, throat. Ingestion-abdominal
discomfort.
explanation of carcinogenicity: the components of this product have not
shown any evidence of being carcinogenic.
effects of overexposure: skin-local redness. Inhalation-headache, nuasea
and drowsiness. Ingestion-nausea and diarrhea.
medical cond aggravated by exposure: prolonged and repeated skin contact
may aggravate an existing dermatitis.
First aid: eyes-flush with water for several min. Get medical aid.
skin-wash with soap & water for several min. Get medical aid.
ingestion-if more than several mouthful are swallowed, give 2
glasses of water. Ge t medical aid. Inhalation-remove to fresh air.
get medical aid if breathing becomes difficult or respiratory
irritation persists.
Hcc: v6
spec gravity: 0.885
appearance and odor: pale liquid. Pertoleum oil odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: toxic levels of carbon monoxide,
carbon dioxide, irritating aldehydes and ketones.
Waste disposal methods: this product has been evaluated for rcra
characteristics & does not meet the criteria of a hazardous waste
if discarded in its original purchased form under rcra. Dispose of
waste in accordance with l ocal, state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillates, solvent-dewaxed heavy
paraffinic
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 95-99.9%
other rec limits: none specified by m.
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 (oil mist)
Hcc: v6
boiling pt: b.P. Text: >572f,>300c
vapor pres:
vapor density: >1
spec gravity: 0.868
evaporation rate & reference:
solubility in water: negligible
appearance and odor: yellow, oily liquid; petroleum odor.
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: do not heat above flash point.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil,hydrotreated (severe), petroleum distillate,
heavy paraffinic
cas: 64742-54-7
rtecs #: py8035501
fraction by wt:
other rec limits: none recommended
ingred name: 2,6-di-tert-butylphenol
cas: 128-39-2
rtecs #: sk8265000
other rec limits: none recommended
osha pel: 10 ppm
acgih tlv: 10 ppm