Worldwide distributor of NSN parts and consumables located in the USA.
A mixture with a mineral and/or synthetic base, not having a true grease structure. It contains a thickening agent which increases viscosity. The lubricant is compounded specifically to be effective in a wide temperature range. Excludes grease, aircraft ordnance.
The last inventory check on this NSN was done on 03/13/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating oils with or without additives, nesoi
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
145000 - Oil o/t petro lubricating noi
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $91.00 to $151.67.. | |
Does NSN 9150-00-949-0323 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Austria, Poland, Bulgaria, Brazil, Spain, Singapore, Malaysia, Australia, Belgium, Canada, New Zealand, Republic Of Korea, United Kingdom, Portugal, Greece, Turkey, and Nato Maintenance and Supply Agency | |
What is the NIIN of NSN 9150-00-949-0323? | |
009490323 or 00-949-0323 | |
Does NSN 9150-00-949-0323 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-949-0323? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Apr 13, 1966 |
Effects of
overexposure: eye: irrt,pain,burn.Skn: irrt,derm,acne.Inhl/ingest: irrt
, catharsis, diarr, aspir pneu poss.
First aid: inhal: rmv to fresh air. If not brthng give cpr; if brthng
diff give oxygen. Eye: immed flush w/plenty of water. Skin: wash
w/soap & water. Rmv contam clthg & shoes. Ingest: do not induce
vomit. Nothg by mouth if unconsc. Get medical attn.
Hcc: v6
solubility in water: negligible
appearance and odor: light tan semifluid, slight odor.
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: heat, open flame
hazardous decomposition products: carbon oxides, lithium pyrolysis
products, smoke, mists
Waste disposal methods: incinerate or landfill in approved facility iaw
all laws & regs.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: sebacic acid, bis(z-ethylhexyl) ester, cas 122-62-3.
cas: 122-62-3
rtecs #: vs1000000
fraction by wt: >66%
ingred name: octadecanoic acid, lithium salt, (lithium stearate), cas
4485-12-5
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: >5%
ingred name: unidentified components
fraction by wt:
ingred name: lithium stearate
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: 2-8%
other rec limits: none recommended
ingred name: diisopropyl hydrogen phosphite
cas: 1809-20-7
rtecs #: sz6600000
fraction by wt:
other rec limits: none recommended
ingred name: additives
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: product is irritating to
eyes,skin,respiratory tract. Also inhalation of decomposition
products may produce polymer fume fever.
explanation of carcinogenicity: may contain a chemical listed as
carcinogen or reproductive toxin under california proposition 65.
effects of overexposure: eye: irritation,burning,tearing. Skin: prolonged
contact produces defatting,drying,dermatitis. Inhaled: respiratory
irritation,pulmonary edema,and flu-like symptoms of polymer fume
fever.
medical cond aggravated by exposure: none reported.
First aid: eye: flush with water 15 min. Skin: remove contaminated
clothing. Wash with soap & water. Inhaled: remove from exposure.
give oxygen if necessary. Polymer fume fever should subside in 24
hrs. Ingested: do not induce vomiting(aspiration hazard).Get
immediate medical attention.
Hcc: v6
boiling pt: b.P. Text: >600/316c
decomp temp: decomp text: 572f/300c
spec gravity: 1.23
solubility in water: insoluble
appearance and odor: cream to tan semi-fluid compound,mild odor.
Stability indicator/materials to avoid: yes
reactive metals,strong oxidizers.
stability condition to avoid: open flame.
hazardous decomposition products: normal products of hydrocarbon
combustion. Plus above 300c hydrogen fluoride and ether fluorides.
Waste disposal methods: dispose i/a/w federal,state,local regulations.
do not burn material contaminated with this product.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: tetrafluoroethylene telomer
fraction by wt: 25.0%
ingred name: unidentified components
ingred name: organic barium compound
fraction by wt: 2.5% max
osha pel: 0.5 mg ba/cum
acgih tlv: 0.5 mg ba/cum
Effects of overexposure: slight to moderate irritation of
skin/wyes,minimize skin contct.Use good hygiene.
First aid: inhal-does not geve off harmful conc vapor except at hi
temp.Ingest-do not induce vomit-give 1/2 pt milk or water & obtain
medical attn.Aspiration-get medical attn.Eyes-wash with copious
quanities wat er
Hcc: v6
boiling pt: b.P. Text: no data-mix
spec gravity: 9000
appearance and odor: no info available
Stability indicator/materials to avoid: yes
strong oxidizing agents such as liquid oxygen
stability condition to avoid: extreme heat
hazardous decomposition products: smoke,fumes,carbon monoxide during
comb or past flashpoint
Waste disposal methods: controlled burning,or disposal conforming to
local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lithium stearate diester (lubricating oil)
fraction by wt: 75%
ingred name: polytetrafluoroethylene (teflon)
cas: 116-14-3
rtecs #: kx4025000
fraction by wt: 25%
acgih tlv: see acgih-b1
Ld50 lc50 mixture: not determined
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause slight irritation to eyes
and skin.
effects of overexposure: may cause slight irritation to eyes and skin.
medical cond aggravated by exposure: none specified by the manufacturer.
First aid: eyes: flush with clear water until irritation subsides;
contact a physician. Skin: wipe or use waterless hand cleaner. Wash
with soap and water. Inhalation: remove from area. Ingestion: do not
induce vomi ting; contact a physician.
Hcc: v6
boiling pt: b.P. Text: 600f,316c
spec gravity: 0.928
solubility in water: insoluble
appearance and odor: tan colored, semi-fluid, pleasant odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: smoke,co and asphyxiants
Waste disposal methods: consult local authorities;disposal must be in
accordance with local,state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: the manufacturer states that no hazardous ingredients are
present in this product.
rtecs #: 9999999zz
fraction by wt: 100%
other rec limits: none specified
Ld50 lc50 mixture: not provided by manufacturer
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may cause moderate eye irritation.
prolonged or repeated skin contact may cause irritation. Avoid
inhalation of mists or vapors as may cause respiratory irritation.
inhalation of decomposition product s may result in "polymer fume
fever" condition.
explanation of carcinogenicity: this product contains no materials
currently listed as carcinogens by ntp, iarc or osha.
effects of overexposure: moderate eye irritation, redness, tearing. Skin
irritation, defatting, dermatitus. Nasal/respiratory irritation,
lung irritation, pulmonary edema, "flu-like" symptoms from exposure
to decomposition pr oducts.
medical cond aggravated by exposure: none known.
First aid: eyes: flush with large amounts of clean water for at least 15
minutes. Contact a physician if irritation persists. Skin: remove
contaminated clothing. Wipe material from skin. Wash thoroughly
with soa p and water. Inhalation: remove from area of exposure.
administer oxygen if deemed necessary. Polymer fume fever condition
should subside within 24 hours. Ingestion: do not induce vomiting.
get doctor
Hcc: v6
boiling pt: b.P. Text: >600f,>316c
spec gravity: 1.23
solubility in water: insoluble
appearance and odor: cream to tan semi-fluid compound, mild odor.
Stability indicator/materials to avoid: yes
avoid reactive metals and strong oxidants.
stability condition to avoid: avoid open flame.
hazardous decomposition products: smoke, fumes, carbon monoxide, carbon
dioxide, various hydrocarbons, oxides of sulfur, hydrogen fluoride
& acid fluoride
Waste disposal methods: all recovered material should be packaged,
labelled, transported, and disposed of in conformance with good
engineering practices. Dispose of in compliance with local, state
and federal regulations re health, air and water pollution.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: tetrafluoroethylene telomer
fraction by wt: 25% %
other rec limits: none specified
osha pel: none established
acgih tlv: none established
ingred name: diisopropyl hydrogen phosphite
fraction by wt:
other rec limits: none specified
ingred name: unidentified component
fraction by wt: >74% %
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: low health hazard.Minimal
irritation on contact. Inhalation of vapors or mists when spraying
may cause irritation. Slightly toxic if swallowed. May cause lung
damage if vomited after ingesting.A ccidental release under high
pressure applications may result in injection of oil into the skin
causing local necrosis.
explanation of carcinogenicity: none of the ingredients in this product
is listed by ntp, iarc or osha as a carcinogen.
effects of overexposure: eyes: minimal irritation. Skin: irritation,
skin drying on prolonged contact. Inhalation: irritation of nose
and throat. Ingestion: discomfort, nausea, diarrhea. Injection:
necrosis may be evidenced b y delayed onset of pain and tissue
damage a few hours following pressure injection.
medical cond aggravated by exposure: because of its defatting
properties, prolonged and repeated skin contact may aggravate an
existing dermatitis.
First aid: eyes: flush with plenty of water for at least 15 minutes. If
irritation persists, see doctor. Skin: wash with soap. If
irritation persists, see doctor. Inhalation: remove victim to fresh
air. Give oxy gen/cpr if needed. See doctor. Ingestion: do not
induce vomiting. See doctor. If conscious,give milk or water.
injection: this is a medical emergency. See doctor immediately.
Hcc: v6
vapor pres: negligible
vapor density: >1
spec gravity: 0.67
viscosity: 13.5cst@104f
solubility in water: insoluble
appearance and odor: pale yellow oily liquid.
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
strong oxidizing agents(eg.Chlorates,nitrates,peroxides).
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: airborne solid and liquid
particulates, carbon monoxide, other unidentified hydrocarbon
products.
Waste disposal methods: contact your local environmental officer.
dispose of in accordance with all federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil, petroleum distillate, solvent refined
(severe), light naphthenic, (non-carcinogenic - iarc);ing1+ing2>95%
cas: 64741-97-5
rtecs #: py8041001
other rec limits: none recommended
ingred name: mineral oil,hydrotreated (severe), petroleum distillate,
heavy paraffinic;ingred 1 + ingred 2 >95%
cas: 64742-54-7
rtecs #: py8035501
other rec limits: none recommended
ingred name: additives
fraction by wt:
other rec limits: none recommended
ROYCO 46 TF
Ld50 lc50 mixture: 3.1g/kg(oral-rat) 5.7g/kg(dermal-rabbit)
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: irritation. Skin contact:
prolonged or repeated contact may cause various skin disorders such
as dermatitis, folliculitis or oil acne. Release during high
pressure can cause local necrosi s. Inhalation/ingestion: no
specific information identified.
explanation of carcinogenicity: product contains no materials currently
classified as carcinogenic by ntp, iarc or osha.
effects of overexposure: eye contact: irritation. Skin contact:
dermatitis, folliculitis, oil acne, local necrosis evidenced by
delayed onset of pain and tissue damage following injection.
inhalation/ingestion: no specific in formation identified.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: eye contact: flush with water for 15 minutes. Skin contact:
remove contaminated clothing and wipe off excess. Wash with soap
and water. Inhalation: remove victim to fresh air and provide
oxygen if bre athing is difficult. Ingestion: do not induce
vomiting. In general, no treatment is necessary unless large
quantities of product are ingested. In all above cases, get medical
attention.
Hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates and gases will evolve. Carbon monoxide &
unidentified organics
Waste disposal methods: contains barium compounds. Dispose of as
required by local, state and federal regulations. Possible d005
hazardous waste (extractable barium waste.)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester
cas: 122-62-3
fraction by wt: 60-70%
other rec limits: none specified
ingred name: barium dinonylnaphtalne sulfonate
cas: 25619-56-1
fraction by wt: 1-2%
other rec limits: none specified
osha pel: 0.5 mg/m3 (as ba)
acgih tlv: 0.5 mg/m3 (as ba)
ingred name: diisopropyl hydrogen phosphite
cas: 1809-20-7
fraction by wt:
other rec limits: none specified
ingred name: other components (additives)
fraction by wt:
other rec limits: none specified
ingred name: teflon (tetrafluoro ethylene polymer) (mfr gave cas#
8002-84-2)
cas: 116-14-3
rtecs #: kx4025000
fraction by wt: 20-30%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust
ingred name: lithium stearate (lithium soap thickener)
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: 2-8%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 (stearates)
Ld50 lc50 mixture: ld50 not available
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: based on presence of comp prod
presumed to be irrit.Skin: prol/rep contact causes serious skin
disorders(derm,folliculitis,oil acne).Release during hi pressure
line may result in injection of oil w /skin causing loc
necrosis.Inhal: compo prod fumes induce temp influenze-like
symptoms(polymer fume fever).Ingest: no info
explanation of carcinogenicity: per msds: does not contain any carc as id
by iarc/ntp/osha.
effects of overexposure: irrit as noted above.Local necrosis is
evidenced by delayed onset of pain & tissue dmg few hrs following
injection.Derm,folliculitis,oil acne.Polymer fume
fever-fever,cough,malaise.
medical cond aggravated by exposure: pre-existing eye & skin disorders
amy be aggravated by exposure to this product.
First aid: eye: wash w/water for 15mins while holding eyelids opn.Get med
attn.Skin: remove contam cloth.Wipe excess off.Wash w/soap/water or
waterless hand cleaner followed by soap/water.Irrit persists get
med at ttn.Matl injected under skin get med atttn promptly to
prevent serious dmg;dont wait for symptoms to dvlp.Inhal: move to
fresh air.Breath diffi provide oxy.Get med attn.Ingest: dont induce
vomit.(suppl)
Hcc: v6
boiling pt: b.P. Text: n/avai
melt/freeze pt: m.P/f.P text: n/avai
decomp temp: decomp text: np
vapor pres: n/avai
vapor density: n/avai
spec gravity: n/avai
ph: np
viscosity: np
evaporation rate & reference: n/avai
solubility in water: insoluble
appearance and odor: light tan semi-fluid w/slight odor.
percent volatiles by volume: np
corrosion rate: np
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat,open flame and contact w/strong
oxidizing agents.
hazardous decomposition products: therm decompo prod hi dependent on
combust conditions.Complex mix-airborne solid,liq parti,gas when
pyrolysis(oth preca)
Waste disposal methods: contains barium @>100mg/l.Epa-rcra: waste matl
w/barium haz waste d005.If exhibits character of toxicity based
upon extracted conc barium as shown by tclp refer latest epa/state
regs regarding dispo.Al tern-recycle by being burn for energy
recovery(su)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: di(2-ethylhexyl) sebacate; synthetic ester
cas: 122-62-3
rtecs #: vs1000000
fraction by wt: 60-70%
other rec limits: none recommended
ingred name: polytetrafluoroethylene
cas: 116-14-3
rtecs #: kx4025000
fraction by wt: 20-30%
other rec limits: none recommended
ingred name: barium dinonylnaphthalene sulfonate
cas: 25619-86-1
fraction by wt: 1-2%
other rec limits: none recommended
ingred name: lithium stearate
cas: 4485-12-5
rtecs #: wi4370000
fraction by wt: 2-8%
other rec limits: none recommended
ingred name: diisopropyl hydrogen phosphite
cas: 1809-20-7
rtecs #: sz6600000
fraction by wt:
other rec limits: none recommended
ingred name: additives
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, respiratory
& gastrointestinal tracts. Acute- eye: may cause irritation. Skin:
concentrate may cause irritation. Inhale: fumes may cause
respiratory irritation and polymer fu me fever. Oral: may cause
gastrointestinal irritation, vomiting, abdominal pain. Chronic-
none.
explanation of carcinogenicity: none.
effects of overexposure: irritation, redness, nausea, vomiting,
diarrhea, blurred vision, tearing, headache, abdominal pain, fever,
chills
medical cond aggravated by exposure: persons with pre-existing skin
disorders, eye problems or impaired respiratory function may be
more susceptible to the effects of this product.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Provide cpr/oxygen if needed. Eyes: immediately flush with
water for 15 minutes. Hold eyelids open. Skin: wash with soap &
water. Oral : get medical attention. Treatment not normally
required.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: >600f,>316c
decomp temp: decomp text: >572f,>300c
spec gravity: 1.060 - 1.080
solubility in water: insoluble
appearance and odor: tan semi-fluid; mild odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, reactive metals
stability condition to avoid: extended exposure to high temperatures
hazardous decomposition products: hydrogen fluoride, carbonyl fluoride
and other fluorinated compounds may be generated.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. This product as purchased does not fall under
current us epa rcra definitions of hazardous waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum sulfonate; naphthalenesulfonic acid,dinonylbarium
salt
cas: 25619-56-1
fraction by wt: 1-5%
other rec limits: none recommended
Ld50 lc50 mixture: not provided
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: based on presence of components 3
and 5 product is presumed to be irritating to the eyes. Skin:
prolonged/repeated contact causes serious skin disorders
(dermatitis, folliculitis, oil acne). R elease during high pressure
line may result in injection of oil into skin causing local
necrosis. Inhalation: inhaling fumes of decompostion products can
induce temporary influenze-like symptoms (p olymer fume fever).
ingestion: no specific information identified. Chronic exposure
tests are not done. However, the handling procedures should be
follwed to minimize employee's exposure.
explanation of carcinogenicity: per msds: does not contain any
carcinogens as identified by iarc, ntp, osha.
effects of overexposure: irritation, local necrosis is evidenced by
delayed onset of pain and tissue damage a few hours following
injection. Dermatitis, folliculitis, oil acne. polymer fume fever,
cough, malaise.
medical cond aggravated by exposure: pre-existing eye and skin disorders
may be aggravated by exposure to this product.
First aid: eye: wash with water for 15 minutes while holding eyelids
open .Get medical attention. Skin: remove contaminated clothing.
wipe excess off. Wash with soap and water or waterless hand cleaner
followed by soap and water. If irritation persists get medical
attention. If injected under skin, get medical attention promptly.
do not wait for symptoms to develop. Inhalation: remove victim to
fresh air an d provide oxygen if breathing is difficult. Get
medical attention. Ingestion: do not induce vomiting. In general no
treatment is necessary unless large quantities of product are
ingested. However, get medical advice.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
decomp temp: decomp text: not provided
vapor pres: not available
vapor density: n/av
spec gravity: not available
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: light tan semi-fluid with slight odor.
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat, open flame and contact with
strong oxidizing agents.
hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates and gases will evolve. Tetrafluorethylene
(>800f), hexafluoropropylene (>825f), perfluorisobutylene (>885f)
and cabonyl fluoride(>930f) may form.
Waste disposal methods: contains barium at > 100 mg/l. Under epa-rcra
(40 cfr 261.24), a waste containing barium is hazardous (waste
number d005), if it exhibits the characteristic of toxicity based
on the extracted concentr ation of barium as shown by toxicity
characteristic leaching procedure (tclp). Material may be recyc
led. Check local and state regulations.
Ingred name: synthetic ester
cas: 122-62-3
rtecs #: vs1000000
minumum % wt: 60.
maxumum % wt: 70.
other rec limits: not provided
ingred name: polytetrafluoroethylene
cas: 9002-84-0
rtecs #: kx4025000
minumum % wt: 20.
maxumum % wt: 30.
other rec limits: not provided
ingred name: barium dinonylnaphthalene sulfonate
cas: 25619-56-1
minumum % wt: 1.
maxumum % wt: 2.
other rec limits: not provided
ingred name: lithium stearate
cas: 4485-12-5
rtecs #: wi4370000
minumum % wt: 2.
maxumum % wt: 5.
other rec limits: not provided
ingred name: diisopropyl hydrogen phosphite
cas: 1809-20-7
rtecs #: sz7660000
< wt: 2.
other rec limits: not provided
ingred name: other additives
< wt: 2.
other rec limits: not provided
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: concentrate will cause eye
irritation. Skin: concentrate may cause skin irritation. Skin
absorption: no acute effects expected. Ingestion: individuals with
preexisting diseases of the lungs may h ave increase susceptibility
to the toxicity of excessive exposures from thermal decompostion.
inhalation: inhalation of decomposition products (occurs if heated
>300c) or of smoke from contaminated to bacco products may cause
respiratory irritation and induce polymer fume fever condition.
effects of overexposure: eye: irritation. Skin contact: irritation.
ingestion: individuals with preexisting diseases of the lungs may
have increased suscepibility to the toxicity of excessive exposures
from thermal decomposit ion. Inhalation: symptoms of exposure to
decomposition products are: lung irritation, pulmonary edema,
flu-like symptoms (example-fever chills).
medical cond aggravated by exposure: no medical conditons are known to
be aggravated by exposure.
First aid: eye: immediately flush eyes with plenty of water for at least
15 minutes. Get medical attention immediately. Skin: wash exposed
areas of the body with soap and water. For holt molten material,
cool bu rned skin area by immersing in cold water or apply cold
water. Wash clothing before reuse. Ingestion: consult physician.
treatment not normally required. Inhalation: remove from exposure
area to fresh air immediately. Administer oxygen if deemed
necessary. Polymer pume fever symptoms should subside within 24
hours.
Hcc: v6
boiling pt: b.P. Text: nd
vapor pres: nd
vapor density: nd
spec gravity: 1.1000 +/-0.1
appearance and odor: tan semi-fluid; mild odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, reactive metals.
stability condition to avoid: avoid contact with strong oxidizing
agents. Extended exposure to high temperatures may cause
decomposition.
hazardous decomposition products: above 300c, hf, carbonyl fluoride and
other fluorinated compouns may be generated.
Waste disposal methods: preferred options for disposal are (1) recycling
and (2) land fill. Incinerate only if incinerator is capable of
scrubbing out hydrogen fluoride and other acidic combustions
products. Treatment, stora ge, transportation and disposal must be
in accordance with applicable federal, state/provincial, and local
regulations.
Ingred name: naphthalenesulfonic acid, dinonyl-, barium salt
cas: 25619-56-1
minumum % wt: 1.
maxumum % wt: 5.