Worldwide distributor of NSN parts and consumables located in the USA.
A fluid of petroleum origin characterized by high viscosity index, used as a power transmission medium in hydraulically-actuated systems and apparatus.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Hydraulic brake fluids & oth prepared liquids for hydraulic transmission, nt containing or containing le 70% by wgt of petroleum oils/oil bituminous
Hydraulic brake fluids and prepared liquids for hydraulic transmissions, containing less than 70% by weight of petroleum or bituminous mineral oils
Chemicals-other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $394.27 to $657.11.. | |
Does NSN 9150-00-985-7237 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Poland, Brazil, Spain, New Zealand, Republic Of Korea, United Kingdom, Portugal, Italy, Denmark, Greece, and Turkey | |
What is the NIIN of NSN 9150-00-985-7237? | |
009857237 or 00-985-7237 | |
Does NSN 9150-00-985-7237 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-985-7237? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1960 |
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: the systemic toxicity of this
substance has not been determined. However; it should be
practically non-toxic to internal oragans if inhaled, swallowed, or
absorbed through the skin. This material is n ot expected to cause
prolonged or signifigant skin or eye irritation. Evalution based on
data from similar materials.
explanation of carcinogenicity: no ingredient of a concentration of 0.1%
or greater is listed as a carcinogen or suspected carcinogen.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: inhaled: none stated. Eyes: flush with water for 15 minutes.
remove contacts if worn. See doctor if symptoms develop. Skin:
remove contaminated clothes. Wash with soap and water. Ingested: if
consciou s, give water or milk. Get medical attention.
Hcc: v6
spec gravity: 0.88 (water=1)
viscosity: 42.6 cst @40c
solubility in water: negligible
appearance and odor: clear, colorless liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: contact with strong oxidizing agents.
hazardous decomposition products: carbon dioxide and water vapor;
incomplete combustion forms carbon monoxide.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: distillates, hydrotreated heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: >99%
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm
ingred name: additives
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: chronic effects: none when used with
good personal hygiene practices.
explanation of carcinogenicity: this product does not contain any
ingredients listed as a carcinogen by osha, iarc or ntp.
effects of overexposure: may cause skin & eye irritation with prolonged
or repeated contact.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: immediately flush with large quantities of water for at
least 15 minutes & call a physician. Skin: remove excess with cloth
or paper. Wash thoroughly with soap & water. Inhalation: remove
victim to fresh air. If swallowed: contact a physician
immediately.
Hcc: v6
spec gravity: 0.878
solubility in water: negligible at 25c
appearance and odor: amber color; liquid oil ; mineral oil odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents such as hydrogen peroxide, bromine, and chromic
acid.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of nitrogen, oxides of sulfur, sulfur dioxide or hydrogen
sulfide.
Waste disposal methods: dispose of in accordance with all applicable
federal, state, & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: non hazardous ingredients
fraction by wt: 100%
other rec limits: none determined
Routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: acute-eyes: may cause irritation.
skin: prolonged skin contact may cause irritation. Inhalation: mist
may cause pulmonary problems which if not treated, could cause
pulmonary injury. Ingestion: low ord er of toxicity.
chronic-prolonged skin contact may cause irritation.
explanation of carcinogenicity: no data available per manufacturer.
effects of overexposure: due to low order of dermal & oral toxicity, the
signs & symptoms of over exposure are unknown.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes & skin may be at
increased risk from exposure.
First aid: inhalation: remove to fresh air. Get medical attention, if
needed. Eyes: immediately flush with water for 15 minutes holding
eyelids open. Get medical attention. Skin: remove contaminated
clothing. Wa sh first with waterless soap, then soapand water.
ingestion: do not induce vomiting. Get immediate medical attention.
Hcc: v6
boiling pt: b.P. Text: 600f,316c
melt/freeze pt: m.P/f.P text: 0
vapor pres: 1
vapor density: not given
spec gravity: 0.876
viscosity: 68 cs @ 104f
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: straw to amber color - no odor
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: extremely high temperatures
hazardous decomposition products: carbon monoxide & dioxide, sulfur &
nitrogen compounds
Waste disposal methods: prevent waste from contaminating surrounding
environment. Discard any product, residue, disposal container or
liner in accordance with all federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt: >99%
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: lubrizol 859 rust inhibitor
fraction by wt:
ingred name: pmc corp. Cao-1 anti-oxidant
fraction by wt:
ingred name: exxon chemical coroexit c
fraction by wt:
ingred name: monsanto modaflow modifier anti-foaming agent
cas: 26376-86-3
fraction by wt:
Effects of overexposure: eye: slight transient irrit; skin: practicly
non-toxic by skin absorption; inhal: none to 25mg/cum-air
First aid: eye: flush w/water-15 min,call doctor; skin: wash w/soap &
water; inhal: remove to fresh air; ingest: give liquids & induce
vomiting-obtain physician. If unconscious,donot give liquids or
induce vomiting. if small amts. Enter mouth,rinse-out thoroughly
Hcc: v6
boiling pt: b.P. Text: wide range
vapor pres:
vapor density: >12
spec gravity: 0.87
evaporation rate & reference: 1000x slower(e.Eth
solubility in water: nil
appearance and odor: amber color fluid with little odor
percent volatiles by volume: nil
Stability indicator/materials to avoid: yes
incompatible w/strong oxidizers
stability condition to avoid: exposure to hi-tepm & contact w/oxidizers.
hazardous decomposition products: mfr shows none;(carbon dioxide &
monoxide, asphyxiants)
conditions to avoid polymerization: material will not polymerize
Waste disposal methods: incineration in compliance w/local, state &
federal regulations which govern disposal of oil or oil type
material or waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: solvent refined heavy paraffinic oil, cas.# 6474-18-84
fraction by wt: unk
acgih tlv: 5.0 mg/cum mfr
ingred name: methacrylate polymer
fraction by wt: unk
acgih tlv: unk
ingred name: rust inhibitor: proprietary
fraction by wt: unk
acgih tlv: unk
ingred name: butylated hydroxy toluene
fraction by wt: unk
acgih tlv: unk
ingred name: phenyl-alpha-naphthylamine
fraction by wt: unk
acgih tlv: unk
Routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: mfr states"this product has been used
for years with no known ill effects." the most likely health hazard
is inhalation of oil mist in the unlikely event that the product
becomes an airborne mist.
effects of overexposure: product may irritate eyes,skin. Under normal
use,should not be inhaled or ingested.
medical cond aggravated by exposure: none
First aid: eye: flush with water for 15 min. Skin: remove contaminated
clothing. Wash with soap & water. Launder clothing before reuse.
inhaled: (highly unlikely)remove from exposure. Get medical care.
ingested: do not induce vomiting get medical care.
Hcc: v6
boiling pt: b.P. Text: 700f/371c
melt/freeze pt: m.P/f.P text: f.P. -15f
spec gravity: 0.89
viscosity: 61.2-74.8 cs
solubility in water: nil
appearance and odor: fluid oil,bland odor.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: heat,ignition sources such as sparks &
open flame
hazardous decomposition products: carbon monoxide,carbon dioxide
Waste disposal methods: dispose i/a/w federal,state,local regulations.
mfr suggests recycle (preferrable) or incinerate.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: mineral oil
cas: 64742-65-0
rtecs #: py8038500
fraction by wt: 99.03%
other rec limits: acgih: stel 10 mg/m3
osha pel: 5 mg/m3 oil mist
acgih tlv: 5 mg/m3 oil mist
ingred name: lubrizol 5160
fraction by wt: 0.70%
ingred name: lubrizol 3132
fraction by wt: 0.25%
ingred name: lubrizol 889b
fraction by wt: 0.01%
ingred name: lubrizol 5957
fraction by wt: 0.01%
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: minor irritation to eyes,skin
and respiratory tract in case oil mist inhalation;sore
throat,coughing,bronchitis,possible pulmonary
edema.Chronic;irritation;deratitis or drying of skin.
explanation of carcinogenicity: data per msds
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: pre-existing conditions may be
worsen.
First aid: skin: wash with soap and water thoroughly eyes: flush with
plenty of water for about 15 minutes;seek medical help.
inhalation: remove to fresh air,call a physician if needed.
ingestion;if conscious give large amount of water/milk and seek
medical help immediately.
Hcc: v6
boiling pt: b.P. Text: 360-540+c
spec gravity: 0.87
solubility in water: negligible
appearance and odor: pale yellow liquid.
Stability indicator/materials to avoid: yes
may react with strong oxidizing materials.
stability condition to avoid: heat,light.
hazardous decomposition products: co*2,h*2o,oxides of sulfur,phophorus
or co.
Waste disposal methods: disposal or incineration must be in accordance
with local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: highly refined base oil, cas: 64742-54-7 & 64742-65-0.
fraction by wt: 99.0%
osha pel: 5mg/cum,as oil mist
acgih tlv: 5mg/cum,as oil mist
ingred name: additives including inhibitors, antiwear agents & zinc
alkyl dithiophosphate
cas: 68649-43-3
fraction by wt: 1.0%
other rec limits: none recommended
Ld50 lc50 mixture: ld 50 dermal rabbits is >10g/kg
routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause irritation of
eyes,skin,respiratory or g.I.Tracts;no other data available.
explanation of carcinogenicity: data per msds
effects of overexposure: see health hazards data.
medical cond aggravated by exposure: persons with a history of ailments
or with a pre-existing disease involving the eyes, skin, or
respiratory tract may be at increased risk from exposure.
First aid: inhalation: remove to fresh air. Resuscitate if not breathing.
get medical attention. Eyes: immediately flush with plenty of water
for 15 minutes holding eyelids open. Get medical attention.
skin: remove contaminated clothing. Wash with soap and water. If
irritation persists, get medical advice. ingestion: do not induce
vomiting. Give nothing by mouth if unconscious. Get immediate
medical attention.
Hcc: v6
vapor pres: 1.0
spec gravity: 0.946
viscosity: 16.9 cst
solubility in water: negligible
appearance and odor: pale yellow liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: none noted;may be carbon monoxide,
carbon dioxide and other unidentified components.
Waste disposal methods: consult local authorities.Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hydraulic fluid(contains silicate esters)
other rec limits: none specified
ingred name: ethylbutanol
cas: 97-95-0
rtecs #: el3850000
other rec limits: none specified
ingred name: other components (type not specified)
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: ingestion: not normally
expected to cause any ill effects. Inhalation: no significant
adverse health effects are expected for short term exposure. Eye:
not normally expected to cause any ill ef fects. Skin: not normally
expected to cause any ill effects. Chronic: prolonged/repeated
contact may cause irritation.
explanation of carcinogenicity: the components of this product have not
shown any evidence of being carcinogenic.
effects of overexposure: overexposure may lead to respiratory
irritation, dermatitis and eye irritation.
medical cond aggravated by exposure: persons with a eye/skin/respiratory
disorders should use caution when handling or using this product.
First aid: skin: remove contaminated clothing. Wash with waterless soap.
get medical attention if irritation persists. Inhalation: remove to
fresh air & restore breathing if necessary. Get medical attention.
eye : immediately flush with water for 15 minutes while holding
eyelids open. Get medical attention. Ingestion: get immediate
medical attention. Do not induce vomiting. Nothing by mouth if
unconscious.
Hcc: v6
boiling pt: b.P. Text: 600f,316c
vapor pres: 1
spec gravity: 0.88
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: straw to amber colored liquid, no odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: carbon monoxide, carbon dioxide,
sulfur and nitrogen compounds, and other asphyxiants.
Waste disposal methods: dispose of waste in accordance with local, state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt: >99%
other rec limits: none specified
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: while this product may irritate the
skin from prolonged skin contact ther is no medical or
First aid: ingestion- do not induce vomiting, call a physicain
immediately. Eyes- purge with copious amounts of water. Skin-
cleanse with waterless soap followed by thoroughly washing with
soap and water.
Hcc: v6
boiling pt: b.P. Text: 600f,316c
melt/freeze pt: m.P/f.P text: not given
decomp temp: decomp text: not given
vapor pres: 1 mm hg
vapor density: not given
spec gravity: 0.876
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: straw to amber color - no odor.
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: sulfur and nitrogen compounds, carbon
monoxide, carbon dioxide due to burning.
Waste disposal methods: unrecoverable liquid and contaminated diking
material should be incinerated in approved equipment or disposed of
at a licensed landfill in accordance with local, state and federal
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt: 95-99%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: proprietary additives
fraction by wt: 1-5%
other rec limits: none recommended
ld50 lc50 mixture: oral ld50 (rat) is unknown.
route of entry inds - inhalation: yes
skin: yes
ingestion: yes
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: acute: eyes/skin/inhalation/ingestion: not normally
expected to cause any adverse health effects except in very sensitive
individuals. Chronic: prolonged or repeated contact may produce mild skin
irri tation and inflammation. Personnel withpre-existing skin disorders
should avoid contact.
explanation of carcinogenicity: none.
signs and symptions of overexposure: eyes/inhalation/ingestion: none normally
expected. Skin: irritation, inflammation.
medical cond aggravated by exposure: person with pre-existing skin disorders
should avoid contact with this product.
first aid: eyes: flush with large amounts of water. If irritation develops get
medical attention. Skin: remove contaminated clothing. Wash area with soap
and water. If irritation or inflammation develops, get me dical attention.
inhalation: move to fresh air. If not breathing, give cpr.Get medical
attention. If unconscious get medical attention. Ingestion: do not induce
vomiting. Get medical attention.
hcc: v6
b.P. Text: >572f,>300c
m.P/f.P text: unknown
decomp text: unknown
vapor pres: <0.1
vapor density: >air
spec gravity: 0.867
evaporation rate & reference: less than ether.
solubility in water: insoluble.
appearance and odor: yellow, oily liquid. Petroleum odor.
percent volatiles by volume: nil
corrosion rate: unknown
product id: mil-h-17672d(2) gr 2135 th,a0960
cage: 2x769
company name: technolube product company
street: 8015 paramount blvd.
city: pico rivera ca
zipcode: 90660-4811
health emergency phone: 310-928-3311,800-424-9300(chemtrec)
label required ind: y
date of label review: 07/21/1994
status code: c
label date: 07/21/1994
origination code: f
eye protection ind: yes
skin protection ind: yes
signal word: caution
respiratory protection ind: yes
health hazard: slight
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: 2x769
trans id no: 96672
product id: mil-h-17672d(2) gr 2135 th,a0960
msds prepared date: 05/11/1993
review date: 07/21/1994
mfn: 1
net unit weight: 36.3 lbs
multiple kit number: 0
review ind: y
unit of issue: cn
container qty: k
type of container: can
Hazard and precautions: no adverse health effects expected. Prolonged contact
may produce mild skin irritation. Personnel with pre-existing skin disorders
should avoid contact. Avoid storage near open flames or other ignitio n
sources. First aid: eyes: flush with large amounts of water. If irritation
develops get medical attention. Skin: remove contaminated clothing. Wash area
with soap and water. If irritation develops, get medical attention.
inhalation: move to fresh air. If not breathing, give cpr. Get medical
attention. If unconscious get medical attention. Ingestion: do not induce
vomiting. Get medical attention. target organs: skin, eyes, respiratory
system.
spill release procedures: stop flow. Wipe or mop up or absorb with diatomaceous
earth or other inert material. Store in appropriate dot approved container
for disposal.
neutralizing agent: none specified by manufacturer.
waste disposal methods: dispose of waste in accordance with all applicable
federal, state and local regulations.
handling and storage precautions: avoid storage near open flames or other
ignition sources. Excessive misting may cause slippery floors. Proper
footware required.
other precautions: wash or take shower if general contact occurs. Remove
oil-soaked clothing and launder before reuse. Discard contaminated leather
gloves and shoes.
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye-not expected to cause prolonged or
significant eye irritation. Skin-not expected to cause prolonged or
significant skin irritation. Inhale-should be practically non-toxic
to internal organs if inh aled. Ingest-should be practically
non-toxic to internal organs if swallowwed.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: none specified by manufacturer.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes-no first aid required. However, flush eyes with fresh
water for 15 min. Skin-no first aid required, however, wash skin
thoroughly with soap & water. Remove & wash contaminated clothing.
inhale-no first aid required. Ingest-give water or milk to drink &
telephone for medical advice. Consult medical personnel before
inducing vomiting.
Hcc: v6
boiling pt: b.P. Text: 680f,360c
spec gravity: 0.87
viscosity: 28.8 cst @40c
solubility in water: insoluble
appearance and odor: pale yellow liquid.
Stability indicator/materials to avoid: yes
may react with strong oxidizing agents, such as chlorates, nitrates,
peroxides, etc.
stability condition to avoid: high heat, open flames and other sources
of ignition.
hazardous decomposition products: no data available.
Waste disposal methods: place contaminated material in disposal
containers & dispose of in a manner consistent with applicable
regulations. Contact local environmental or health authorities for
approved disposal of this mate rial.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lubricating base oil
fraction by wt: >99%
other rec limits: none specified
ingred name: additives
fraction by wt:
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is >5 g/kg
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: based on similar products:
eye: presumed to be non-irritating. Skin: no more than mildly
irritating to the skin. Prolonged &/or repeated skin contact may
cause dermatitis, oil acne, folliculitis. Inhala tion: vapor or oil
mist may result in mild upper respiratory irritation. Ingestion: no
more than slightly toxic.
explanation of carcinogenicity: mfr listed no information about the
carcinogenicity of this material. Hmis does not expect it to be
carcinogenic.
effects of overexposure: irritation as noted above. Necrosis may be
evidenced by delayed on set of pain & tissue damage a few hours
following high pressure injection.
medical cond aggravated by exposure: preexisting skin and respiratory
disorders.
First aid: if irritation or symptoms persist or are severe, see a
doctor. eye: flush w/water. Skin: wash with soap & water. Remove
contaminated clothing and launder before reuse. In injected under
skin,get medica l attention. Inhaled: remove to fresh air.
aid/restore breathing if necessary. Ingested: do not induce
vomiting. No treatment is necessary unless large quantities are
ingested. Get medical advice.
Hcc: v6
nrc/state lic num: none
melt/freeze pt: m.P/f.P text: 0f,-18c
spec gravity: 0.8805
viscosity: 65-71 cs
solubility in water: negligible
appearance and odor: white oil, slight hydrocarbon odor
Stability indicator/materials to avoid: yes
oxidizing materials
stability condition to avoid: avoid heat and open flames
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates and gases. Carbon monoxide and other
unidentified materials.
Waste disposal methods: place in an appropriate disposal facility in
compliance w/local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: distillates, hydrotreated heavy paraffinic
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: 0-99%
other rec limits: none recommended
osha pel: 300 ppm
acgih tlv: 300 ppm
ingred name: mineral oil, petroleum distillate, solvent dewaxed
(severe), heavy paraffinic
cas: 64742-65-0
rtecs #: py8038501
fraction by wt: 0-99%
other rec limits: none recommended
ingred name: minor additives
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: product's ld50 (oral rat) was not stated
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: while this product may irritate the
skin from prolonged skin contact ther is no medical or
First aid: ingestion: do not induce vomiting, call a physicain
immediately. Eyes: purge w/copious amounts of water. Skin: cleanse
w/waterless soap followed by thoroughly washing w/soap & water.
Hcc: v6
nrc/state lic num: none
boiling pt: b.P. Text: 600f,316c
melt/freeze pt: m.P/f.P text: 0f,-18c
vapor pres: 1 mm
spec gravity: 0.876
evaporation rate & reference:
solubility in water: 0
appearance and odor: straw to amber color - no odor.
Stability indicator/materials to avoid: yes
contacr w/strong oxidizers.
stability condition to avoid: n/a.
hazardous decomposition products: sulfur & nitrogen compounds, carbon
monoxide, carbon dioxide due to burning.
conditions to avoid polymerization: will not occur.
Waste disposal methods: unrecoverabe liquid and contaminated diking
material should be incinerated in approved equiment or disposed of
at a licensed landfill i/a/w federal, state & local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: refined heavy paraffinic distillates
cas: 64741-88-4
fraction by wt: 95-99%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: un-named lubrizol additives claimed as "proprietary"
fraction by wt: 1-5%
other rec limits: none recommended
Ld50 lc50 mixture: tlv not established for product
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eyes: min irrit as temp
discomft.Skin: brief contact not irrit.Prol contact may cause
defatting of skin,irrit as loc redness w/possible mild
discomft.Inhal: vap/mist in excess permiss conc/hi conc from
spray/heat/expo in poorly venti area/conf spaces may irrit
nose/throat,head,nau,drowsiness.Ingest: >several (supple)
explanation of carcinogenicity: per msds: prod &/or compo(s) carc
according to: none.
effects of overexposure: matl from hi pressure epqmt/pinhole leaks/hi
pressure line failure can penetrate skin;if not properly treated
can cause severe injury,include disfigurement,loss of function,even
require amputation of affected area.To prevent such serious injury
immed med attn should be sought even if injection injury appears
minor.
medical cond aggravated by exposure: because of its defatting
properties,prolong/rep skin contact may aggravate existing
dermatitis (skin conditions).
First aid: eye: flush w/plenty of water for several mins.Irrit persist
get med attn.Skin: wash w/plenty of soap/water for several
mins.Irrit develops/persist get med attn.Ingest: >several mouthfuls
of matl ingest g ive 2 glasses of water(16oz).Get med
attn.Inhal: symptoms occur remove to fresh air.Breath diff/resp
irrit persist get med attn.Hi pressue injection can cause sev
injury.Failure to debride wound(suppl)
Hcc: v6
boiling pt: b.P. Text: n/determine
melt/freeze pt: m.P/f.P text: na
decomp temp: decomp text: np
vapor pres: n/determin
vapor density: n/determin
spec gravity: 0.88
ph: na
viscosity: 68cst @10c
evaporation rate & reference: np
solubility in water: not determined
appearance and odor: light pale liquid, mild odor
percent volatiles by volume: np
corrosion rate: np
Strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: toxic levels of carbonn
monoxide,carbon dioxide,irritating aldehydes and ketones.
Waste disposal methods: prod has been evaluated for rcra charact &
doesnt meet criteria of haz waste if discarded in its purchased
form.Under rcra user responsible to determine @dispo time whether
prod meets rcra criteria fo r haz waste because prod
uses/transform/mix/(supp)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: xylenes (o-,m-,p- isomers) (sara 313) (cercla), 0.001315
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: see ing
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 100 ppm/150stel;9596
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: hydrotreated heavy paraffinic petroleum distillates,
95.00-99.99.
cas: 64742-54-7
rtecs #: py8035501
fraction by wt: see ing
other rec limits: none recommended
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: haz evaluation based on data from
similar matls.Eye/skin: not expected to cause prol/signif
irrit.Systemic toxicity of substance hasnt been determined.Should e
pract non-toxic to internal organs if get s on skin.Hi pressure
eqpmt info: accidental hi-velocity injection under skin may result
in serious injury.Seek (supplem)
explanation of carcinogenicity: per msds: not listed in ntp nor
classified by iarc.
effects of overexposure: haz evaluation based on data frm similar
matls.Eye/skin/oral/inhal: no product toxicology data avai.Contains
petro base oils which may be refined by var severe
hydrotreating.None of oils require canc w arn under 29cfr1910.1200.
medical cond aggravated by exposure: none specified by manufacturer.
targer organs: none
First aid: eye/skin: no 1staid require.As precaut flush eye w/fresh h2o
15mins.Remove contact lenses.As precaut wash skin well
w/soap/h2o.Remove contam cloth.Ingest: give h2o/milk to drink.Phone
med advice.Consult med personnel bef induce vomit.Med advice cant
be obtain take victim/prod cntnr to med emerg treat
cntr/hosp.Inhal: resp discomft/irrit occur move to fresh air.Cont
see dr.Dr note: accident(othr preca)
Hcc: v6
boiling pt: =360.C, 680.F
melt/freeze pt: m.P/f.P text: na
decomp temp: decomp text: np
vapor pres: na
vapor density: na
spec gravity: 0.87
voc pounds/gallon: 19
ph: nda
viscosity: 28.8cst @40c
evaporation rate & reference: na
solubility in water: insoluble
appearance and odor: pale yellow liquid
percent volatiles by volume: na
corrosion rate: np
Stability indicator/materials to avoid: yes
may react w/strong oxidizing agents,such as
chlorates,nitrates,peroxides, etc.
stability condition to avoid: no data available
hazardous decomposition products: co2,h2o vap & may produce oxides of
sulfur & phosporus.Normal combust forms oxides of zinc.Incomplete
combust prod co.
Waste disposal methods: not expect to present any enviro problems other
that those assoc w/oil spills.Oil collection serv avai for use oil
recyc/dispo.Place contam matl in cntnr,dispo in manner consist
w/appli regs.Contact s ale rep/loc enviro/health author for approv
method
Ingred name: lubricating bse oil containing one or more of ingred 2,3.
fraction by wt: >98.0%
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: solvent dewaxed dist., heavy paraffinic
cas: 64742-65-0
rtecs #: py8038501
other rec limits: none recommended
ingred name: distllates hydrotreated heavy paraffnic, hydrotreated
dist., hvy para
cas: 64742-54-7
rtecs #: py8035500
other rec limits: none recommended
osha pel: 5 mg/m3 (oil mist)
acgih tlv: 5 mg/m3 (oil mist)
ingred name: additives
fraction by wt:
other rec limits: none recommended
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: while this product may irritate the skin from prolonged
hcc: v6
boiling point: =315.6c, 600.F
b.P. Text: ibp
melt/freeze pt: =-17.6c, 0.F
decomp text: not provided by mfr
vapor pres: 1 mm hg @20 deg c
spec gravity: 0.876 (h20=1)
ph: not provided
viscosity: unknownn/k
solubility in water: 0
appearance and odor: straw to amber color - no odor.
percent volatiles by volume: not provided
corrosion rate: not provided by mfr
product id: imperial 2135th, (see suppl)
cage: 58563
company name: imperial oil co inc
street: foot of orchard pl
po box: 279
city: morganville nj
zipcode: 07751
health emergency phone: 908-591-9400/fax -8825
label required ind: y
date of label review: 07/17/2001
status code: a
label date: 07/17/2001
origination code: f
chronic hazard ind: y
eye protection ind: yes
skin protection ind: yes
signal word: warning
respiratory protection ind: yes
health hazard: moderate
contact hazard: slight
fire hazard: slight
=======================================================
responsible party cage: 58563
trans id no: 157901
product id: imperial 2135th, (see suppl)
msds prepared date: 05/15/2000
review date: 07/17/2001
mfn: 4
net unit weight: 36.6 lbs
multiple kit number: 0
unit of issue: cn
container qty: k
type of container: can
Hazard and precautions: low temperature storage increases the viscosity of
these oils (stops pouring at -18 to 130 c). Use product with caution around
open flames, heat, sparks, pilot lights, and static electricity. Product has
a low order of oral and dermal toxicity.
spill release procedures: dike and contain spill with inert material (sand,
earth, fullers earth, etc). Transfer liquid and contaminated diking material
to separate containers for recovery or disposal. Area may be slippery - c are
should be taken to avoid falls, prevent material from getting into sewers and
open bodies of water.
neutralizing agent: m/p
waste disposal methods: unrecoverabe liquid and contaminated diking material
should be incinerated in approved equiment or disposed of at a licensed
landfill in accordance with local, state, and federal regulations. "empty"
containers should be disposed of in an environmentally safe manner and in
accordance with local, sta te, and federal regulations.
handling and storage precautions: low temperature storage - increases the
viscosity of these oils, these oils will stop pouring at -18 to -30c. Use
product with caution around open flames, heat, sparks, pilot lights, and
static elect ricity.
other precautions: "empty containers retain residue, liquid and vapor, and can
be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose such containers to heat, flame, sparks, or other sources of
ignition> do not attempt to clean, since the containers should be disposed
of in an environmental ly safe manner.