Worldwide distributor of NSN parts and consumables located in the USA.
A synthetic or mineral oil base grease designed for lubrication of antifriction bearings, lightly loaded gears, and on sliding and rolling surfaces of such equipment as instruments, cameras, electronic equipment and aircraft control systems. It is not specially prepared for salt spray resistance but can be used for a wide temperature range. Excludes grease (1), aircraft; and grease (1), instrument.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
090960 - Lubricating grease noi
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $39.57 to $65.95.. | |
Does NSN 9150-00-985-7244 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, Defense Threat Reduction Agency, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Poland, Brazil, Spain, Singapore, Morocco, Malaysia, Australia, New Zealand, France, Germany, Republic Of Korea, United Kingdom, Philippines, Italy, Denmark, Greece, Turkey, and Nato Maintenance and Supply Agency | |
What is the NIIN of NSN 9150-00-985-7244? | |
009857244 or 00-985-7244 | |
Does NSN 9150-00-985-7244 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-985-7244? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1960 |
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin. Acute-
eye: direct contact irritates slightly. Skin: prolonged/repeated
contact may cause irritation. Injection under skin causes local
necrosis. Inhale: vapor may irritate respi ratory tract. Oral: small
amounts shouldnot injure. Swallowing large amounts may be harmful.
chronic- dermatitis.
explanation of carcinogenicity: none.
effects of overexposure: irritation, redness, swelling, tissue damage,
nausea, vomiting
medical cond aggravated by exposure: individuals with pre-existing skin
disorders may be more succeptible to the effects from exposure to
this product.
First aid: get medical help if symptoms persist. Inhaled: remove to fresh
air. Eyes: flush with water for 15 minutes. Hold eyelids open.
skin: wipe off excess & wash skin with mild soap & water or
waterless cleaner . If injected under skin, regardless ofits size,
contact a physician immediately. Delay may cause loss of affected
part of body. Oral: do not induce vomiting. Call physician if large
amounts ingested.
Hcc: v6
nrc/state lic num: not relevant
solubility in water: insoluble
appearance and odor: tan, smooth grease - slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat, open flame
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates & gases will evovle. Carbon monoxide & other
compd. May form.
Waste disposal methods: dispose of in accordance with all local, state
and federal regulations. This product is classified as an oil under
section 311 of the clean water act. Spills that cause a sheen must
be reported to the national response center, 800-424-8802.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester
cas: 1330-86-5
fraction by wt: 75 - 85%
other rec limits: none recommended
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 10 - 15%
other rec limits: none recommended
ingred name: antimony dialkyldithiocarbamate
cas: 15991-76-1
fraction by wt: 1 - 2%
other rec limits: none recommended
osha pel: 0.5 mg sb/m3
acgih tlv: 0.5 mg sb/m3
ingred name: p,p'-dioctyldiphenylamine
cas: 68411-46-1
fraction by wt: 1 - 2%
other rec limits: none recommended
ingred name: minor additive
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: acute: irritation of eyes, skin,
respiratory tract and g. I. Tract. Chronic: irritation and
dermatitis.
explanation of carcinogenicity: shows carcinogenicity of chlorinated
long-chain paraffins in lab animals. (liver and kidney damage).
medical cond aggravated by exposure: pre-existing condition may be
worsen.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
solubility in water: negligible
appearance and odor: smooth tan grease with slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: heat,open flame
hazardous decomposition products: co & unidentified org.Compds,may be
formed upon combustion.
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester
fraction by wt: >80.00%
ingred name: lithium based soap thickened
cas: 7620-77-1
fraction by wt: >12.00%
ingred name: chlorinated paraffins
fraction by wt:
ingred name: unidentified components (mixture)
fraction by wt:
Effects of overexposure: eye/skin: irritation. Injection of grease into
skin: soft tissue damage.
First aid: eye: flush with water 15 minutes. Skin: wash with soap &
water. Injection under skin: contact physician immediately.
Hcc: v6
boiling pt: b.P. Text: >500f/260c
vapor density: >10
spec gravity: 0.94
evaporation rate & reference:
solubility in water: negligible
appearance and odor: smooth light tan color. Mild,bland odor.
Stability indicator/materials to avoid: yes
strong oxidants,eg: liquid chlorine,oxygen,ca(ocl)*2,naocl
hazardous decomposition products: fumes,smoke,carbon monoxide,sulfur
oxide.
Waste disposal methods: assure conformity with applicable disposal
regulations. Dispose of absorbed material at an approved waste
disposal site or facility.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lithium soap
ingred name: synthetic esters
Ld50 lc50 mixture: ld50 (oral rat) 6000-12000 mg/kg
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: may be mildly irritating.
skin: release during high pressure usage may result in injection of
oil into the skin causing local necrosis. Inhalation: not expected
to be a relevant route of exp osure; high temperature vapors
irritaterespiratory tract. Ingestion: low level of toxicity.
chronic: skin disorders.
explanation of carcinogenicity: data per msds
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: buff colored, smooth, buttery grease; slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: high temperatures, sparks, and open
flames.
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local/state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester
cas: 103-24-2
fraction by wt: 87.0%
other rec limits: 5mg/cum as oil mist
ingred name: inorganic clay
cas: 1302-78-9
fraction by wt: 6.0%
other rec limits: none recommended
ingred name: fatty acid amides
cas: 68910-93-0
fraction by wt: 2.0%
other rec limits: none recommended
ingred name: fatty acid amides
cas: 64754-98-9
fraction by wt: 2.0%
other rec limits: none recommended
ingred name: other components
fraction by wt: 3.0%
other rec limits: none recommended
Ld50 lc50 mixture: ld50 >5 g/kg (rat)
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: minimally irritating to eyes, skin and
respiratory tract. Repeated inhalation,ingestion, or absorption
through the skin. The lead in this product may result in the
accumulation of lead in the body wit h damage to multiple organs.
explanation of carcinogenicity: animal for lead naphthenate
effects of overexposure: mild irritation to eyes,skin&respiratory tract.
medical cond aggravated by exposure: none known
First aid: eyes: flush with plenty of water. Skin: wash exposed areas
with soap and water. Ingestion: if conscious, give 2 glasses of
water and induce vomiting by sticking fingers down throat, call a
doctor immed iately. Never give anything by mouth toan unconscious
person. Inhal: none considered necessary.
Hcc: v6
boiling pt: b.P. Text: >450f,232c
vapor pres: nil
solubility in water: negligible
appearance and odor: buttery brown semi-solid, no odor specified.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizers
hazardous decomposition products: toxic fumes & carbon monoxide, carbon
dioxide, aldehydes&ketones & combust products of lead & lithium.
Waste disposal methods: product has been evaluated for rcra
characteristic and does not meet criteria of a hazardous waste if
discarded in its purchased form. Dispose i/a/w all local,state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: azelaic acid, bis(2-ethylhexyl) ester
cas: 103-24-2
rtecs #: cm2000000
fraction by wt: 50-65%
ingred name: diisooctyl adipate
cas: 1330-86-5
fraction by wt: 20-35%
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 11-20%
ingred name: lead naphthenate
cas: 61790-14-5
rtecs #: qk9150000
fraction by wt: 1-4%
osha pel: 0.1 mg(pb)/cum
acgih tlv: 0.15 mg(pb)/cum
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eyes: mild
irritation.Skin: prolonged/repeated contact may cause
dermatitis,folliculitis/oil acne.Inhalation: at high
temperatures,vapors may cause nose,throat & upper respiratory tract
irritation. Ingestion: low order of toxicity.Chronic: none given.
effects of overexposure: see health hazards section.
medical cond aggravated by exposure: preexisting respiratory disorders
may be aggravated by exposure to lithium hydroxystearate.
First aid: get medical attention.Inhalation: remove to fresh air.Give
oxygen if needed.Ingestion: do not induce vomiting.No treatment is
necessary unless large amount of product is ingested.Eye: flush with
water fo r 15 minutes while holding eyelids open.Skin: wipe excess
off.Flush with water.Follow washing with soap & water.
Hcc: v6
nrc/state lic num: not relevant
spec gravity: approx.
solubility in water: negligible
appearance and odor: amber liquid with mild odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: avoid heat and open flames.
hazardous decomposition products: carbon monoxide,oxides of
antimony,sulfur,lithium,nitrogen and other unidentified organic
compounds
Waste disposal methods: place in an appropriate disposal facility in
compliance with local regulations.Under epa-cwa,this product is
considered an oil under section 311.Spills into surface waters that
cause a sheen must be r eported to the national response
center8004248802
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: adipic acid; diisooctyl ester - synthetic ester
cas: 1330-86-5
fraction by wt: 70 - 80%
other rec limits: none specified
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 10 - 20%
other rec limits: none specified
ingred name: antimony dialkyldithiocarbamate
cas: 15991-76-1
fraction by wt: 0 - 5%
other rec limits: none specified
osha pel: 0.5 mg sb/m3
acgih tlv: 0.5 mg sb/m3
ingred name: additive containing polyisobutylene
fraction by wt: 0 - 5%
other rec limits: none specified
ingred name: minor additives
fraction by wt:
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact may be slightly
irritating. Prolonged or repeated skin contact may cause various
skin disorders. Release during high pressure usage may result in
injection under the skin causing necrosis. Inhalation of vapors
may be irritatingto nose, throat, upper respiratory tract.
explanation of carcinogenicity: this compound contains no ingredients at
concentrations of 0.1% or greater that are carcinogens or suspect
carcinogens.
effects of overexposure: eye irritation, skin irritation, dermatitis,
folliculitis, oil acne, necrosis, nose irritation, throat
irritation, upper respiratory tract irritation
medical cond aggravated by exposure: preexisting respiratory disorders
may be aggravated by exposure to this product.
First aid: get medical attention.Inhalation: remove to fresh air.Give
oxygen if needed.Ingestion: do not induce vomiting.No treatment is
necessary unless large amount of product is ingested.Eye: flush with
water fo r 15 minutes while holding eyelids open.Skin: wipe excess
off. Flush with water.Follow washing with soap & water. If material
is injected under skin, get medical attention promptly!
Hcc: v6
boiling pt: b.P. Text: not given
melt/freeze pt: m.P/f.P text: not given
decomp temp: decomp text: not given
vapor pres: not given
vapor density: not given
spec gravity: not given
evaporation rate & reference: not given
solubility in water: insoluble
appearance and odor: tan smooth, slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: avoid heat and open flames.
hazardous decomposition products: carbon monoxide and other unidentified
organic compounds
Waste disposal methods: place in an appropriate disposal facility in
compliance with local regulations.Under epa-cwa,this product is
considered an oil under section 311.Spills into surface waters that
cause a sheen must be r eported to the national response
center8004248802
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester
cas: 1330-86-5
fraction by wt: 75-85%
other rec limits: none specified
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 10-15%
other rec limits: none specified
ingred name: antimony dialkyldithiocarbamate
cas: 15991-76-1
fraction by wt: 1-2%
other rec limits: none specified
osha pel: 0.5 mg sb/m3
acgih tlv: 0.5 mg sb/m3
ingred name: benzenamine, n-phenyl-,
cas: 68411-46-1
fraction by wt: 1-2%
other rec limits: none specified
ingred name: minor additives
fraction by wt:
other rec limits: none specified
Ld50 lc50 mixture: acute oral,rat ld50: 6-12 g/kg.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be mildly irritating
to the eyes. Skin contact: prolonged or repeated contact may cause
various skin disorders such as dermatitis, follicultis or oil acne.
this product is a mild skin sensitizer based on animal studies.
release during high pressure usage may result in injection of
grease into the skin causing local necrosis. Inhalation: not
expected to be a relevant route of expos ure. However, high vapor
or aerosol mist concentrations may be irritation to the nose,
throat and upper respiratory tract. Ingestion: lubricating
(oils/greases) are generally considered no more than slightly
toxic if swallowed.
explanation of carcinogenicity: this product and its components are not
classified as carcinogens by iarc, ntp, or osha.
effects of overexposure: eyes: irritatation. Skin: dermatitis,
folliculitis, oil acne, sesitization, local necrosis. Skin
sesitization (allergy) may be evidenced by rashes, especially
hives. Local necrosis is evidenced by del ayed onset of pain and
tissue damage a few hours following injection. Inhalation: nose,
throat, and upper respiratory tract irritation. Ingestion:
considered no more than slightly toxic.
medical cond aggravated by exposure: preexisting skin disorders may be
aggravated by exposure to this product.
First aid: eye contact: flush with water for 15 minutes; holding eyelids
open. Get medical attention. Skin contact: remove contaminated
clothing, wipe excess off. Wash with soap and water or waterless
hand clean er followed by soap and water. Do not reuse clothing
until cleaned. If irritation persists, get medical attention. If
material injected under skin, get medical attention promptly; do
not wait for sym ptoms to develop. Inhalation: move to fresh air.
provide oxygen if breathing difficult. Get medical attention.
ingestion: do not induce vomiting. No treatment necessary for small
amounts. Get medical advice.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
decomp temp: decomp text: not provided
vapor pres: not available
vapor density: n/av
spec gravity: not available
viscosity: not provided
evaporation rate & reference: not available
solubility in water: insoluble.
appearance and odor: buff colored, smooth, buttery grease, slight odor.
percent volatiles by volume: n/av
corrosion rate: not provided
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat,open flame and contact with
strong oxidizing agents.
hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates, gases will evolve when this material undergoes
pyrolysis or combustion. Carbon monoxide and unidentified organic
compounds may be formed.
Waste disposal methods: if this product becomes a waste, it would not be
a hazardous waste by rcra criteria (40 cfr 261). Place in an
appropriate disposal facility in compliance with local regulations.
Ingred name: synthetic ester
cas: 103-24-2
rtecs #: cm2000000
minumum % wt: 80.
maxumum % wt: 85.
other rec limits: not provided
ingred name: inorganic clay
cas: 1302-78-9
rtecs #: ct9450000
minumum % wt: 5.
maxumum % wt: 10.
other rec limits: not provided
ingred name: fatty acid amides
minumum % wt: 3.
maxumum % wt: 5.
other rec limits: not provided
ingred name: phenyl-alpha-naphthylamine
cas: 90-30-2
rtecs #: qm4500000
minumum % wt: 1.
maxumum % wt: 2.
other rec limits: not provided
ingred name: additives
minumum % wt: 1.
maxumum % wt: 2.
other rec limits: not provided
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: may be slightly
irritating to the eyes. Skin contact: prolonged or repeated contact
may cause various skin disorders such as dermatitis, folliculitis
or oil acne. Release during high pres sure usage may result in
injection of oil into the skin causing local necrosis. Inhalation:
not expected to be a relevant route of exposure, however, under
high temperature conditions, vapors irritati ng to the nose, throat
and upper respiratory tract may be produced. Ingestion: no specific
information identified.
effects of overexposure: irritation as noted above. Local necrosis is
evidenced by delayed onset of pain and tissue damage a few hours
following injection.
medical cond aggravated by exposure: preexisting eye and skin disorders
may be aggravated by exposure to this product.
First aid: eye: flush with water for 15 minutes while holding eyelids
open. Get medical att'n. Skin: remove contaminated clothing & wipe
excess off. Wash with soap & water or a waterless had cleaner
followed by soap& water. Do not reuse clothing until thoroughly
cleaned. If irritation persists, get medical att'n. If material is
injected under the skin, get medical att'n promptly to prevent
serious damage. Do not wait for symptoms to develop. Inhalation:
remove victim to fresh air & provide oxygen if breathing is
difficult. Get medical att'n. Ingestion: do not induce vomiting.
get medical advice.
Hcc: v6
boiling pt: b.P. Text: na
melt/freeze pt: m.P/f.P text: na
decomp temp: decomp text: na
vapor pres: na
vapor density: na
spec gravity: na
evaporation rate & reference: na
solubility in water: insoluble
appearance and odor: tan smooth, slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: avoid heat, open flame and contact with
strong oxidizing agents.
hazardous decomposition products: a complex mixture of airborne solid,
liquid particulates and gases will evolve when this material
undergoes pyropysis or combustion. Carbon monoxide and unidentified
organic compounds may be formed.
conditions to avoid polymerization: will not occur
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
Ingred name: synthetic ester
cas: 1330-86-5
minumum % wt: 75.
maxumum % wt: 85.
ingred name: lithium 12-hydroxystearate
cas: 7620-77-1
minumum % wt: 10.
maxumum % wt: 15.
ingred name: p,p'-dioctyldiphenylamine
cas: 68411-46-1
minumum % wt: 1.
maxumum % wt: 2.
ingred name: antimony dialkyldithiocarbamate
cas: 15991-76-1
minumum % wt: 1.
maxumum % wt: 2.
ingred name: minor additives
< wt: 4.