NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A synthetic or mineral oil base grease designed for lubrication of antifriction bearings, lightly loaded gears, and on sliding and rolling surfaces of such equipment as instruments, cameras, electronic equipment and aircraft control systems. It is not specially prepared for salt spray resistance but can be used for a wide temperature range. Excludes grease (1), aircraft; and grease (1), instrument.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
090960 - Lubricating grease noi
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $259.44 to $432.41.. | |
| Does NSN 9150-00-985-7247 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Federal Aviation Administration, U.s. Coast Guard, Lithuania, Poland, Spain, Argentina, Singapore, Kuwait, Saudi Arabia, Thailand, Australia, Canada, New Zealand, France, Germany, Republic Of Korea, United Kingdom, Philippines, Netherlands, Portugal, Italy, Denmark, Greece, Turkey, and Nato Maintenance and Supply Agency | |
| What is the NIIN of NSN 9150-00-985-7247? | |
| 009857247 or 00-985-7247 | |
| Does NSN 9150-00-985-7247 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-985-7247? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1960 | |
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: irrit. Skin: release during
high pressure usage may result in injection of oil into skin
causing local necrosis. Inhal: under high temp conditons, vapors
irrit nose/throat/upper resp tract.Ing est: no specific info
identified.
explanation of carcinogenicity: data per mgf msds.
effects of overexposure: slight irritation to skin & eyes
medical cond aggravated by exposure: pre-existing eye and skin
disorders.
First aid: skin: remove product by wiping or applying waterless hand
cleaner followed by washing with soap & warm water.Eyes-wash with
copious quantity clear water
Hcc: v6
solubility in water: negligible
appearance and odor: tan colored grease-little or no odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: smoke,co,co*2
Waste disposal methods: consult local authorities;disposal must be in
accordance with local,state and federal regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: dibasic acid ester
fraction by wt:
ingred name: lithium hydroxy stearate
fraction by wt:
ingred name: p.P.Dioctyl di phenylamine
fraction by wt:
ingred name: p,p'-dioctyldiphenylamine
cas: 101-67-7
rtecs #: jj8850000
fraction by wt: 1-2%
other rec limits: none recommended
ingred name: calcium petroleum sulfonate
fraction by wt:
Effects of overexposure: eyes: irritating;skin: irritation;inhal: not
specified;ingest: g.I.Disturbances like diarrhea,catharsis.
First aid: inhale: remove to fresh air, give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth;
get medical attention for eyes, breathing difficulty, or other
symptoms of overexposure.
Hcc: v6
solubility in water: negligible
appearance and odor: smooth tan grease with slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: co & unidentified org.Compds,may be
formed upon combustion.
Waste disposal methods: dispose of collected material in accordance with
local,state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester
fraction by wt: >80%
acgih tlv: not specified
ingred name: lithium based soap thickened
fraction by wt: >12%
acgih tlv: not specified
ingred name: chlorinated paraffins (see supp data)
fraction by wt:
acgih tlv: not specified
ingred name: other components (unidentified)
fraction by wt:
acgih tlv: not specified
Effects of overexposure: eye/skin irritation. Injection of grease into
skin: soft tissue damage.
First aid: eye: flush with water 15 minutes. Skin: wash with soap &
water. Injection under skin: contact physician immediately.
Hcc: v6
boiling pt: b.P. Text: >500f/260c
vapor density: >10
spec gravity: 0.94
evaporation rate & reference:
solubility in water: negligible
appearance and odor: smooth light tan color. Mild,bland odor.
Stability indicator/materials to avoid: yes
strong oxidants,eg: liquid chlorine,oxygen,ca(ocl)*2,naocl
hazardous decomposition products: fumes,smoke,carbon monoxide,sulfur
oxide.
Waste disposal methods: assure conformity with applicable disposal
regulations. Dispose of absorbed material at an approved waste
disposal site or facility.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lithium soap
ingred name: synthetic esters
Ld50 lc50 mixture: ld50 (oral rat) 6-12 g/kg
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may be mildly irritating to the eyes.
prolonged or repeated skin contact may cause various disorders such
as dermatitis, tolliculitis or oil acne, release during high
pressure usage may result in inje ction of oil into the skin
causing local necrosis. No specific information is available for
ingestion.
explanation of carcinogenicity: data per msds
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
solubility in water: negligible
appearance and odor: buff colored, smooth, buttery grease, slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: avoid heat, open flame
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local/state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester
cas: 103-24-2
fraction by wt: 87.0%
ingred name: bentonite (as nuisance dust or particulates not otherwise
regulated)
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: 6.0%
osha pel: 15 mg/m3 total dust
acgih tlv: 10 mg/m3 tdust;8990
ingred name: fatty acid amides
cas: 68910-93-0
fraction by wt: 2.0%
ingred name: fatty acid amides
cas: 64754-98-9
fraction by wt: 2.0%
ingred name: other components (type not specified)
fraction by wt: 3.0%
Ld50 lc50 mixture: ld50 >5 g/kg (rat)
routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: minimally irritating to eyes, skin and
respiratory tract. Repeated inhalation,ingestion, or absorption
through the skin of the lead in this product may result in the
accumulation of lead in the body w ith damage to multiple organs.
explanation of carcinogenicity: animal for lead naphthenate
effects of overexposure: mild irritation to eyes,skin&respiratory tract.
medical cond aggravated by exposure: none known
First aid: eyes: flush with plenty of water. Skin: wash exposed areas with
soap and water. Ingestion: if conscious, give 2 glasses of water
and induce vomiting by sticking fingers down throat. Call a doctor
immedi ately. Never give anything by mouth to an unconscious
person. Inhal: none considered necessary.
Hcc: v6
boiling pt: b.P. Text: >450f,232c
vapor pres: nil
solubility in water: negligible
appearance and odor: buttery brown semi-solid, no odor specified.
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong oxidizers
stability condition to avoid: high heat or open flame.
hazardous decomposition products: toxic fumes & cabon monoxide, carbon
dioxide, aldehydes&ketones & combust products of lead & lithium.
Waste disposal methods: product has been evaluated for rcra
characteristic and does not meet criteria of a hazardous waste if
descarded in its purcased form. Dispose i/a/w all local,state and
federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: acute: may cause skin or eyes
irritation upon contact.(msds shows no data.) chronic: skin/eyes
irritation;may cause cancer.
explanation of carcinogenicity: n-phenyl-beta-naphthylamine is
considered a potential carcenogen.All precautions should be taken
to avoid contact.
effects of overexposure: may cause skin & eye irritation upon prolonged
contact.
medical cond aggravated by exposure: no data available.
First aid: inhale: revove to fresh air,give cpr/o*2 if
need;eyes/skin: flush w lg amts h*2o for 15 min;ingest: rinse mouth,
after removing excess material;get immediate medical attention for
eyes or ingest.
Spec gravity: 0.947
solubility in water: negligible
appearance and odor: semi-solid,green,mineral oil odor
Stability indicator/materials to avoid: yes
strong oxidizing agents/chronic acid,h*2o*2,bromine.
stability condition to avoid: ignition sources.
hazardous decomposition products: co,co*2
Waste disposal methods: keep in covered containers pending disposal.
handle and dispose in full compliance with all applicable
international,federal,state and local regulations. Dispose as solid
waste.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum hydrocarbons
other rec limits: 5mg/cum as oil mist
ingred name: additives
ingred name: n-phenyl-beta-naphthylamine (suspected
carcinogen),human/animal
cas: 102395-08-4
rtecs #: qm4550000
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye: may be mildly irritating.
skin: release during high pressure usage may result in injection of
oil into the skin causing local necrosis. Inhalation: not expected
to be a relevant route of expo sure; high temperature vapors
irritate respiratory tract. Ingestion: low level of toxicity.
chronic: skin disorders.
explanation of carcinogenicity: data per msds
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
solubility in water: negligible
appearance and odor: tan,smooth,slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: adipic acid; diisooctyl ester
cas: 1330-86-5
fraction by wt: 75-85%
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 10-15%
ingred name: antimony dialkyldithiocarbamate
cas: 15991-76-1
fraction by wt: 1-2%
osha pel: 0.5 mg sb/m3
acgih tlv: 0.5 mg sb/m3
ingred name: p,p'-dioctyldiphenylamine
cas: 101-67-7
rtecs #: jj8850000
fraction by wt: 2-6%
ingred name: minor additives
fraction by wt:
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: per msds no known ill effects
from this product;eye: may be mildly irritating. Skin: release during
high pressure usage may result in injection of oil into the skin
causing local necrosis. Inhalat ion: not expected to be a relevant
routeof exposure; high temperature vapors irritate respiratory
tract.
explanation of carcinogenicity: data per msds
effects of overexposure: see health hazards data
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
boiling pt: b.P. Text: 650f,343c
melt/freeze pt: m.P/f.P text: 350f,177c
spec gravity: o.87
solubility in water: nil
appearance and odor: light red grease-bland
percent volatiles by volume: 0.0
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases;co and co*2 in case of incomplete
combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 12.0%
ingred name: polyalphaolefin base stock
cas: 68649-12-7
fraction by wt: 42.0%
ingred name: synthetic ester(diester fluid)
cas: 103-24-2
fraction by wt: 41.9%
ingred name: barium sulfonate
cas: 25619-56-1
rtecs #: qm4450000
fraction by wt: 1.0%
ingred name: tricresylphosphate
cas: 1330-78-5
rtecs #: td0175000
fraction by wt: 3.0%
ingred name: dye-anthraquinone red
cas: 2379-79-5
fraction by wt: 0.1%
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: no data available. chronic:
may cause skin and eyes irritation upon repeated and/or prolonged
contact.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: inhalation: not expected route of entry.Under
high temperature conditions,vapors may irritate nose and throat.
eyes: may cause mild irritation on contact. Skin: components are
unlikely to be absorbed thr ough skin.Prolonged/repeated contact
may cause dermatitis, folliculitis or oil acne. Ingestion: no
specific information.
medical cond aggravated by exposure: no data available.
First aid: inhalation: remove to fresh air. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with soap and water. Remove contaminated clothing. If
irritation per sists, get medical attention. Ingestion: do not
induce vomiting. In general, no treatment is required. Get medical
advice.
Hcc: v6
boiling pt: b.P. Text: 650f,343c
melt/freeze pt: m.P/f.P text: 350f,177c
spec gravity: 0.87
solubility in water: negligible at 25c
appearance and odor: light red grease - bland.
Stability indicator/materials to avoid: yes
strong oxidizing agents such as hydrogen peroxide, bromine, and chromic
acid
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: combustion will cause oxides of carbon
and sulfur. May also decomposes to hydrogen sulfide depending upon
the temperatur
Waste disposal methods: keep in covered containers pending disposal.
handle an dispose in full compliance with all applicable
federal,state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 12.0%
other rec limits: none specified
ingred name: barium dinonylnaphthalene sulfonate
cas: 25619-56-1
fraction by wt: 1.0%
other rec limits: none specified
ingred name: tricresylphosphate
cas: 1330-78-5
rtecs #: td0175000
fraction by wt: 3.0%
other rec limits: none specified
ingred name: polyalphaolefin base stock
cas: 68649-12-7
fraction by wt: 42.0%
other rec limits: none specified
ingred name: anthraquinone dye (red)
cas: 2379-79-5
fraction by wt: 0.1%
other rec limits: none specified
ingred name: diester fluid
cas: 103-24-2
fraction by wt: 41.9%
other rec limits: none specified
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: unknown skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: no data available. chronic:
may cause skin and eyes irritation upon repeated and/or prolonged
contact.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: inhalation: not expected route of entry.Under
high temperature conditions,vapors may irritate nose and throat.
eyes: may cause mild irritation on contact. Skin: components are
unlikely to be absorbed thr ough skin.Prolonged/repeated contact
may cause dermatitis, folliculitis or oil acne. Ingestion: no
specific information.
medical cond aggravated by exposure: no data available.
First aid: inhalation: remove to fresh air. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with soap and water. Remove contaminated clothing. If
irritation per sists, get medical attention. Ingestion: do not
induce vomiting. In general, no treatment is required. Get medical
advice.
Hcc: v6
spec gravity: 0.924
solubility in water: negligible at 25c
appearance and odor: amber colored semi-solid product (grease), mineral
oil odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents such as hydrogen peroxide, bromine, and chromic
acid
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: combustion will cause oxides of carbon
and sulfur. May also decomposes to hydrogen sulfide depending upon
the temperatur
Waste disposal methods: keep in covered containers pending disposal.
handle an dispose in full compliance with all applicable
federal,state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: petroleum hydrocarbon
other rec limits: none specified
osha pel: 5 mg oil mist
acgih tlv: 5mg oil mist
ingred name: addive, minor,type not known
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: eye/skin: mildly irritating.
release during high pressure usage may result in injection of oil
into the skin causing local necrosis. Inhalation: not expected to be
a relevant route of exposure; h igh temperature vapors irritate
respiratory tract. Ingestion: low level of toxicity. Chronic:
dermatitis.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
solubility in water: negligible, 0.1%
appearance and odor: lavender colored, smoothe textured grease.
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high heat, open flames and other sources
of ignition
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diester oil
other rec limits: none specified
ingred name: lithium soap thickner
cas: 4485-12-5
rtecs #: wi4370000
other rec limits: none specified
Ld50 lc50 mixture: ld50 (oral rat) 6-12 g/kg
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: may be mildly irritating to the eyes.
prolonged or repeated skin contact may cause various disorders such
as dermatitis, tolliculitis or oil acne, release during high
pressure usage may result in inje ction of oil into the skin
causing local necrosis. No specific information is available for
ingestion.
explanation of carcinogenicity: no ingredient or a concentration of 0.1%
or greater is listed by ntp, iarc or regulated by osha as a
carcinogen.
effects of overexposure: may cause eye, skin & respiratory tract
irritation. Local necrosis is evidenced by delayed onset of pain
and tissue damage a few hours following injection.
medical cond aggravated by exposure: pre-existing skin disorders may be
aggravated by exposure to this product.
First aid: inhalation: remove to fresh air. Give oxygen if breathing is
difficult. Get medical attention. Eye: flush with water for 15
minutes while holding eyelids open. Get medical attention. Skin:
wash with s oap & water/waterless cleaner. Remove contaminated
clothing. If irritation persists, get medical attention. Ingestion:
do not induce vomiting. In general, no treatment is required. Get
medical advice.
Hcc: v6
evaporation rate & reference: not available
solubility in water: negligible
appearance and odor: buff colored, smooth, buttery grease, slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: avoid heat, open flame
hazardous decomposition products: a mixture of airborne solid, liquid
particulates and gases (co) will evolve when this material
undergoes combustion.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local/state and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester or azelaic acid, bis(2-ethylhexyl) ester
cas: 103-24-2
rtecs #: cm2000000
fraction by wt: 80-85%
other rec limits: none recommended
ingred name: inorganic clay or bentonite
cas: 1302-78-9
rtecs #: ct9450000
fraction by wt: 5-10%
other rec limits: none recommended
osha pel: 5 mg/m3 (dust)
acgih tlv: 5 mg/m3 (dust)
ingred name: fatty acid amides
fraction by wt: 3-5%
other rec limits: none recommended
ingred name: phenyl-alpha-naphthylamine
cas: 90-30-2
fraction by wt: 1-2%
other rec limits: none recommended
ingred name: additives
fraction by wt: 1-2%
other rec limits: none recommended
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: no
health hazards acute and chronic: may be slightly irritating to the
eyes. Prolonged or repeated contact may cause various skin
disorders such as, dermatitis, folliculitis or oil acne. Release
during high pressure usage may result in i njection of oil into the
skin causing local necrosis. Inhalation is not expected to be a
revelant route of exposure. However, under high temperature
conditions, vapor irritating to nose. Throat & uppe r respiratory
tract may be produced. Ingestion: no specific information
identified.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: irritating to eyes, skin, nose, throat and
upper respiratory tract. May cause various skin disorders such as
dermatitis. Folliculitis or oil acne. Release during high pressure
usage may result in inj ection of oil into the skin causing local
necrosis. local necrosis is evidenced by delayed onset of pain &
tissue damage a few hours following injection note to physician:
in general, emesis inducti on is unnecessary in high viscosity, low
volatility products, i. E. , most oils and greases.
medical cond aggravated by exposure: pre-existing eye and skin disorders
may be aggravated by exposure to this product.
First aid: eyes: flush with water for 15 minutes while holding eyelids
open. Get medical attention. Skin : remove contaminated clothing &
wipe excess off. Wash with soap & water or waterless hand cleaner
follow ed by soap & water. Do not reuse clothing until cleaned. If
irritation persists, get medical attn. If material injected under
skin, get medical attention promptly to prevent serious damage.
inhalation : remove victim to fresh air & provide oxygen if
breathing is difficult. Get medical attention. Ingestion: do not
induce vomiting. In general, no treatment necessary unless large
quantity's ingested. get medical advice.
Hcc: v6
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
decomp temp: decomp text: not available
vapor pres: not available
vapor density: not availa
spec gravity: not available
evaporation rate & reference: not available
solubility in water: insoluble
appearance and odor: tan, smooth, slight odor.
Stability indicator/materials to avoid: yes
contact with strong oxidizing agents.
stability condition to avoid: avoid heat, open flame.
hazardous decomposition products: complex mixture of airborne solid.
liquid particulates & gases will evolve when matl undergoes
pyrolysis or combustion, unidentified organic compounds & carbon
monoxide may be formed upon combustion.
conditions to avoid polymerization: will not occur.
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local regulations.
Ingred name: synthetic ester
cas: 1330-86-5
code: f
minumum % wt: 75.
maxumum % wt: 85.
ingred name: lithium hydroxystearate
cas: 7620-77-1
code: f
minumum % wt: 10.
maxumum % wt: 15.
ingred name: antimony dialkyldithiocarbamate
cas: 15991-76-1
code: f
minumum % wt: 1.
maxumum % wt: 2.
ingred name: p,p'-dioctyldiphenylamine
cas: 68411-46-1
code: f
minumum % wt: 1.
maxumum % wt: 2.
ingred name: minor additives
< wt: 4.