NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps sub2
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - 65.0
Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.
Z - No special type of cargo code applicable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,182.84 to $1,971.41.. | |
| Does NSN 9150-00-985-7317 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, U.s. Coast Guard, Spain, Singapore, Kuwait, Malaysia, Australia, France, Germany, Republic Of Korea, Portugal, Italy, Denmark, Greece, and Turkey | |
| What is the NIIN of NSN 9150-00-985-7317? | |
| 009857317 or 00-985-7317 | |
| Does NSN 9150-00-985-7317 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-00-985-7317? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Jan 01, 1960 | |
Ld50 lc50 mixture: ld50 (oral rat) is not available
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute effects: mild eye irritation and
dryness. Chronic effects: skin irritation.
explanation of carcinogenicity: none of the compounds in this product is
listed by iarc, ntp, or osha as a carcinogen.
effects of overexposure: eyes: may cause temporary discomfort with mild
redness and dryness similar to windburn; skin: several repeated
prolonged exposures may cause irritation. Inhalation: no injury is
likely from relatively short exposure of less than 8 hours.
ingestion: swallowing large amounts may cause digestive discomfort.
medical cond aggravated by exposure: manufacturer states none.
First aid: eyes: flush immediately with plenty of water. Skin: wipe off
and flush with plenty of water. Inhalation: no first aid should be
needed. Ingestion: get medical attention.
Hcc: v6
boiling pt: b.P. Text: not applcbl
vapor pres:
spec gravity: 1.95
evaporation rate & reference: (ether =1),
solubility in water: negligible (
appearance and odor: paste-like, black; very little odor
percent volatiles by volume:
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: high temperatures, sparks, and open flames
hazardous decomposition products: metal oxides, sulfur oxides, carbon
dioxide, and traces of imcompletely burned carbon products.
Waste disposal methods: contact your local environmental officer.
dispose of in accordance with all applicable federal, state and
local environmental regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 65%
ingred name: lithium 12 hydroxystearate (lithium stearate)
cas: 7620-77-1
fraction by wt: 3.0%
ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
fraction by wt:
ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
fraction by wt:
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: health hazards: acute: eye, skin and
gastrointestinal irritation, blurred vision, nausea, vomiting,
diarrhea. Chronic: dermatitis.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: eye: irritation,redness,blurred vision;
skin: irritation,dermatitis; ing: can cause gastrointestinal
irritation,nausea,vomiting & diarrhea.
medical cond aggravated by exposure: no data available
First aid: skin: wash with soap & water; eyes: flush with copious amounts
of water,get medical attention; ing: do not induce vomiting,keep
warm,get medical attention.
Hcc: v6
spec gravity: 1.92
solubility in water: nil
appearance and odor: gray/black liquid,very slight odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: open flames.
hazardous decomposition products: toxic fumes including sulfur &
silicone compounds may be released.
Waste disposal methods: dispose of waste in a chemical landfill as
approved by current local,state & federal laws & regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
other rec limits: none specified
osha pel: 10 mg/m3 total dust
acgih tlv: 10 mg/m3; 8990
ingred name: other components (type not specified)
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute-eyes: can cause
irritation,redness,blurred vision.Skin: prolonged contact can cause
irritation,dermatitis.Inhalation: not given.Ingestion: can cause
gastrointestinal irritation,nausea,vomiting & dia rrhea.Chronic-not
given.
effects of overexposure: see health hazards section.
medical cond aggravated by exposure: may aggravate pre-existing skin
disorders.
First aid: get medical attention.Inhalation: move to fresh
air.Eyes: immediately flush with water for 15 minutes.Skin: wash
affected area with soap and water.Ingestion: do not induce
vomiting.Keep warm.Obtain medica l attention.
Hcc: v6
solubility in water: nil
appearance and odor: gray/black liquid, very slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: open flames
hazardous decomposition products: irritating and/or toxic fumes
including sulfur and silicone compounds may be released.
Waste disposal methods: dispose of waste in a chemical landfill as
approved by current federal, state and local laws and regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: molybdenum disulfide - concentration is trade secret
cas: 1317-33-5
rtecs #: qa4697000
other rec limits: none specified
osha pel: 10 mg/m3 (mfr)
acgih tlv: 10 mg/m3 (mfr)
ingred name: synthetic oils
other rec limits: none specified
osha pel: 5 mg/m3 as oil mist
acgih tlv: 5 mg/m3 as oil mist
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: may cause slight irritation to
eyes. A single short exposure to skin causes no known adverse
effect. Several repeated exposure to skin may cause irritation.
inhalation: no injury is likely from relatively short exposure of
less than 8 hours. Oral: small amounts transfered to mouth by
fingers during use, should not injure, swallowing large amounts may
injure. Chronic: may effect reproductive system.
explanation of carcinogenicity: data per msds
effects of overexposure: ingestion of large amounts may cause digestive
discomfort. Prolonged exposures may cause skin irritation.
eyes: redness, swelling and irritation.
medical cond aggravated by exposure: not listed/provided.
First aid: inhalation: none should be needed. Remove to fresh air.
eyes: immediately flush with water for 15 minutes holding eyelids
open. Get medical attention. Skin: none should be needed. Wash with
soap and wa ter. Ingestion: get immediate medical attention.
Hcc: v6
spec gravity: 1.90
evaporation rate & reference:
appearance and odor: charcoal colored paste, slight odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: none listed in msds.
hazardous decomposition products: metal oxides, oxedes and oxides of
sulfur & carbon, traces of incompletely burned carbon compounds,
quartz, silicon dioxide, formaldehyde.
Waste disposal methods: consult local authorities. Disposal must be made
in accordance with all applicable federal, state and local laws and
regulations.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
fraction by wt: 66.0%
osha pel: 10 mg/m3 tdust (mo)
acgih tlv: 10 mg/m3 (mo); 8990
ingred name: lithium 12 hydroxystearate
cas: 7620-77-1
fraction by wt: 4.0%
ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
< wt: .1
other rec limits: 20 microgram/m3 twa
ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
< wt: .1
other rec limits: 200 microgram twa
Ld50 lc50 mixture: no data provided by manufacturer
routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: direct contact irritates slightly
with redness & swelling. Skin: a single relatively short exposure
causes no known effect. Several repeated or prolonged exposures
(24-48 hours) may irritate. Inh alation: no irritation to eyes and
respiratory passages. No injury is likely from relatively short
exposures of less than 8 hours. Oral: small amounts transferred to
the mouth by fingers during use, e tc., should not injure.
swallowing large amounts may injure slightly. Repeated exposure
effects: skin: none known. Inhalation: none known. Oral:
swallowing large amounts may injure slightly.
explanation of carcinogenicity: none known.
effects of overexposure: eyes: irritation, redness, swelling. Skin:
possible irritation.
medical cond aggravated by exposure: no data provided by manufacturer
First aid: eyes: flush immediately with plenty of water for 15 minutes.
skin: no first aid should be needed. Inhalation: no first aid
should be needed. Ingestion: get medical attention. Comments: treat
according to person's conditions and specifics of exposure.
Hcc: n1
boiling pt: b.P. Text: not determined
melt/freeze pt: m.P/f.P text: not determined
spec gravity: 1.90
solubility in water: not determined
appearance and odor: charcoal paste, slight odor.
Stability indicator/materials to avoid: yes
oxidizing material can cause a reaction.
stability condition to avoid: no data provided by manufacturer.
hazardous decomposition products: thermal breakdown at temperatures:
metal oxides, sulfur oxides, carbon dioxide, and traces of
incompletely burned carbon products, quartz, silicon dioxide,
formaldehyde.
conditions to avoid polymerization: hazardous polymerization will not
occur.
Waste disposal methods: when a decision is made to discard this
material, as received, is it classified as a hazardous waste? No.
federal hazardous waste code: n/a. Characterisitc waste: ignitable:
n/a, corrosive: n/a, react ive: n/a, tclap: n/a.Stae or local laws
may impose additional regulatory requirements regarding disp osal.
Ingred name: molybdenum disulfide
cas: 1317-33-5
rtecs #: qa4697000
= wt: 66.
ingred name: lithium 12 hydroxystearate (lithium stearate)
cas: 7620-77-1
= wt: 4.
ingred name: 2,6-cis-diphenylhexamethylcyclotetrasiloxane
cas: 33204-76-1
rtecs #: gz4390000
< wt: .1
ingred name: phenylheptamethylcyclotetrasiloxane
cas: 10448-09-6
rtecs #: gz4392000
< wt: .1