NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A grease designed for the lubrication of silicone insulated electric motors with heat stabilized ball and roller bearings and other specialized high temperature applications.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating greases with or w/out additives
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ESDA - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
ADPE- Represents items with no adp components
155100 - Petroleum products
604 - Petroleum, lubricating grease (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - Flammable liquids, un class 3 (flammable liquids label)
Z - No rating
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $1,107.55 to $1,845.92.. | |
| Does NSN 9150-01-422-2407 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Navy, United Kingdom, and Netherlands | |
| What is the NIIN of NSN 9150-01-422-2407? | |
| 014222407 or 01-422-2407 | |
| Does NSN 9150-01-422-2407 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-01-422-2407? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Nov 27, 1995 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye: may irritate eyes. Skin: may
cause mild skin irritation inhalation: a dust hazard may be created
if, under conditions of use, solid particles are seperated from the
polymeric matrix. Oral: none k nown.
explanation of carcinogenicity: product contains methylpolysiloxanes
which can generate formaldehyde at approximately 300f & above, in
atmospheres which contain oxygen. Formaldehyde is a skin &
respiratory sensitizer, eye & throat i rritant, acute toxicant &
potential cancer hazard.
effects of overexposure: eye: may irritate eyes. Skin: may cause mild
skin irritation inhalation: a dust hazard may be created if, under
conditions of use, solid particles are seperated from the polymeric
matrix. Oral: none k nown.
medical cond aggravated by exposure: n/pno data provided by manufacturer
First aid: eyes: contact with the eyes may cause temporary irritation.
flush eyes with copious amounts of water for a minimum of 15
minutes. If chronic irritation develops contact a physician. Skin:
contact with skin is not expexted to cause irritation. Wash
contacted areas with soap and water. oral: if ingested do not
induce vomiting. Get prompt medical attention.
Hcc: v5
evaporation rate & reference: 1.4%
appearance and odor: off white to tan paste
Do not use in or around highly oxidative chemicals such as liquid
oxygen, chlorine or peroxides nor on surfaces to be painted.
stability condition to avoid: no data provided by manufacturer
hazardous decomposition products: no data provided by manufacturer
Waste disposal methods: disposal should be made in accordance with
federal, state and local regulations.
Ingred name: lithium stearate
cas: 4485-12-5
rtecs #: wi4370000
minumum % wt: 10.
maxumum % wt: 30.
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
ingred name: lithium hydroxide
cas: 1310-65-2
rtecs #: oj6307070
< wt: 1.
osha pel: 2 mg/m3
acgih tlv: 2 mg/m3
ingred name: methylphenylpolysiloxane
cas: 68083-14-7
minumum % wt: 60.
maxumum % wt: 80.