Worldwide distributor of NSN parts and consumables located in the USA.
A noncorrosive mineral, synthetic, or biobased oil with special oxidation resistant and rust-inhibiting additives for use in hydraulic systems, waterbury speed reducers, and plane lifts.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating oils with or without additives, nesoi
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
ADPE- Represents items with no adp components
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
145000 - Oil o/t petro lubricating noi
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $44.15 to $73.58.. | |
Does NSN 9150-01-424-7696 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, U.s. Marine Corps, and Department Of The Navy | |
What is the NIIN of NSN 9150-01-424-7696? | |
014247696 or 01-424-7696 | |
Does NSN 9150-01-424-7696 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-01-424-7696? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Feb 05, 1996 |
Ld50 lc50 mixture: ld50 (oral, rat) is >2,000 mg/kg.
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: u.S. Osha hazard communication
standard: product assessed in accordance with osha 29 cfr 1910.1200
and determined not to be hazardous.
explanation of carcinogenicity: none
effects of overexposure: no significant effects expected.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Provide cpr/oxygen if needed. Eyes: flush with water for 15
minutes. Hold eyelids open. Skin: wipe off excess. Wash skin with
soap & wate r. Oral: if more than 1/2 liter (pint) ofthis product
are swallowed, immediately drink 1-2 glasses of water. Seek medical
attention. Do not induce vomiting/give anything by mouth to an
unconscious one
Hcc: v6
nrc/state lic num: not relevant
boiling pt: >316.C, 600.8f
vapor pres:
vapor density: >2.0
spec gravity: 0.88
viscosity: 40.3cst @40c
solubility in water: negligible
appearance and odor: amber fluid - mild odor
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extreme heat
hazardous decomposition products: carbon monoxide
Waste disposal methods: dispose of in an appropriate disposal facility
in compliance with local, state and federal regulations.
incineration or recycling is recommended.
Ingred name: zinc dithiophosphate
cas: 19210-06-1
rtecs #: te4800000
= wt: 2.52
other rec limits: none recommended
ingred name: zinc
cas: 7440-66-6
rtecs #: zg8600000
= wt: .14
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
Ld50 lc50 mixture: not provided
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: effects of overexposure: slight eye
irritation. Slight skin irritation.
explanation of carcinogenicity: none
effects of overexposure: not provided
medical cond aggravated by exposure: not provided
First aid: eye contact: flush thoroughly with water. If irritation
occurs, call a physician. Skin contact: wash contact areas with
soap and water. Inhalation: not expected to be a problem.
ingestion: not expecte d to be a problem. However, if more than 1/2
liter (pint) ingested, give 1 to 2 glasses of water and call a
physician, hospital emergency room or poison control center for
assistance. Do not induce vo miting or give anything by mouth to an
unconscious person.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: >315.6c, 600.F
melt/freeze pt: =-28.7c, -20.F
m.P/f.P text: pour point
decomp temp: decomp text: not provided
vapor pres:
spec gravity: 0.88
ph: not relevant
viscosity: 40.3 cst @ 40c/104f
evaporation rate & reference: not provided
solubility in water: negligible
appearance and odor: amber liquid, mild odor.
percent volatiles by volume: not provided
corrosion rate: not provided
Not formulated with contaminants as d etermined by the toxicity
characteristic leaching procedure (tclp). However, used product may
be reg ulated.
state regulatory information: the following product ingredients are
cited on the lists below: zinc dithiophosphate (2.52%) by ca, la,
mi, nj, and pa. Zinc (elemental analysis) (0.14%) 7440-66-6 (mi
293).
Waste disposal methods: product is suitable for burning in an enclosed,
controlled burner for fuel value or disposal by supervised
incineration. Such burning may be limited pursuant to the resource
conservation and recovery act. In addition, product is suitable
for processing by an approved recycling facility or can be dis
posed of according to regulations.
Ingred name: distillates (petroleum), hydrotreated heavy paraffinic
(total % of ingredients 1, 2 and 3 >90%). Contains two or more.
cas: 64742-54-7
rtecs #: py8035500
fraction by wt: see ing.
other rec limits: 5 mg/m3 (oil mist)
osha pel: not provided
acgih tlv: not provided
ingred name: residual oils (petroleum), solvent-dewaxed (total % of
ingredients 1, 2 and 3 >90%). Contains two or more.
cas: 64742-62-7
fraction by wt: see ing.
other rec limits: 5 mg/m3 (oil mist)
osha pel: not provided
acgih tlv: not provided
ingred name: lubricating oils (petroleum), c>25, hydrotreated bright
stock-based (total % of ingredients 1, 2 and 3 >90%). Contains two
or more.
cas: 72623-83-7
fraction by wt: see ing.
other rec limits: 5 mg/m3 (oil mist)
osha pel: not provided
acgih tlv: not provided
ingred name: phenol,dodecyl-,hydrogen phosphorodithiolate, zinc salts
(zinc dithiophosphate)
cas: 54261-67-5
= wt: 2.52
other rec limits: not provided
osha pel: not provided
acgih tlv: not provided
ingred name: sulfonic acids, petroleum, calcium salts, overbased
cas: 68783-96-0
< wt: 2.
other rec limits: not provided
osha pel: not provided
acgih tlv: not provided
Ld50 lc50 mixture: ld50 (oral, rat) > 2,000 mg/kg
routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: u.S. Osha hazard communication
standard: product assessed in accordance with osha 29 cfr 1910.1200
and determined not to be hazardous.
explanation of carcinogenicity: none
effects of overexposure: no significant effects expected.
medical cond aggravated by exposure: not provided
First aid: eye contact: flush thoroughly with water. If irritation
occurs, call a physician. Skin contact: wash contact areas with
soap and water.Inhalation: remove from further exposure. If
respiratory irritati on, dizziness, nausea or unconsciousness
occurs, seek immediate medical assistance. If breathing has
stopped, assist ventilation with bag-valve-mask device or use
mouth-to-mouth resuscitation. Ingesti on: not expected to be a
problem. If greater than 1/2 liter (pint) ingested, seek medical
attention.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: >316.C, 600.8f
melt/freeze pt: =-36.1c, -33.F
m.P/f.P text: pour point
decomp temp: decomp text: not provided
vapor pres:
vapor density: >2.0
spec gravity: 0.88
viscosity: 39 cst @40c
solubility in water: negligible
appearance and odor: amber fluid - mild odor
percent volatiles by volume: not provided
corrosion rate: not provided
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: extreme heat
hazardous decomposition products: carbon monoxide
Waste disposal methods: product is suitable for burning in an enclosed,
controlled burner for fuel value or disposal by supervised
incineration. Such burning may be limited pursuant to the resource
conservation and recovery act. In addition, product is suitable
for processing by an approved recycling facility or can be dis
posed of according to regulations.
Ingred name: pet hydrocarbons
ingred name: additives
other rec limits: not provided