NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating oils with or without additives, nesoi
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
145000 - Oil o/t petro lubricating noi
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
R - Flammable liquids, un class 3 (flammable liquids label)
W - Rating variable
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $6,539.15 to $10,898.58.. | |
| Does NSN 9150-01-439-2070 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, U.s. Coast Guard, Brazil, Spain, Australia, Republic Of Korea, and Turkey | |
| What is the NIIN of NSN 9150-01-439-2070? | |
| 014392070 or 01-439-2070 | |
| Does NSN 9150-01-439-2070 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 9150-01-439-2070? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Dec 02, 1996 | |
Ld50 lc50 mixture: ld50 (oral, rat) is not known.
routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: eye, skin, nerve & gi
tract. Acute- lubricating oils are considered no more than
minimally irritating to eyes & skin. Injection into skin causes
necrosis. Inhalation of vapor (hot oil)/m ist may cause mild
irritation & delayedneurotoxicity. Could be toxic if
swallowed/absorbed through skin. Chronic- unk.
explanation of carcinogenicity: none.
effects of overexposure: irritation, redness, swelling, tissue damage,
nausea, vomiting, headache
medical cond aggravated by exposure: persons with pre-existing skin
disorders, eye problems or impaired nerve or respiratory function
may be more susceptible to the effects of this product.
First aid: get medical help if symptoms persist. Inhaled: move to fresh
air. Provide oxygen if needed. Eyes: flush with water for 15
minutes. Hold eyelids open. Skin: wipe off excess. Wash skin with
soap & water. I f injected under skin, contact a physician promptly
to prevent serious injury. Oral: if conscious, drink no more than 2
glasses of water & induce vomiting. Get medical attention.
Hcc: v6
nrc/state lic num: not relevant
spec gravity: 0.99
viscosity: 28 cst @ 100f
solubility in water: negligible
appearance and odor: clear liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents
stability condition to avoid: excessive heat, flame
hazardous decomposition products: a complex mixture of airborne solid,
liquid, particulates & gases will evovle. Carbon monoxide & other
compd. May form.
Waste disposal methods: dispose of in accordance with local, state and
federal regulations. This product is classified as an oil under
section 311 of the clean water act. Spills that cause a sheen must
be reported to the nat ional response center, 800-424-8802.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: synthetic ester/pentaerythritol esters
cas: 68424-31-7
fraction by wt: 0 - >90%
other rec limits: none recommended
ingred name: synthetic ester/fatty acids, c5-9, mixed esters
w/pentaerythritol and valeric acid
cas: 68424-33-9
fraction by wt: 0 - >90%
other rec limits: none recommended
ingred name: octylated n-phenyl-1-naphthylamine
cas: 68259-36-9
fraction by wt:
other rec limits: none recommended
ingred name: p,p'-dioctyldiphenylamine
cas: 101-67-7
rtecs #: jj8850000
fraction by wt:
other rec limits: none recommended
ingred name: tricresyl phosphate (mixed isomers)
cas: 1330-78-5
rtecs #: td0175000
fraction by wt: 1%
other rec limits: none recommended
ingred name: minor additives
fraction by wt:
other rec limits: none recommended
Ld50 lc50 mixture: oral ld50 (rat) >5 g/kg of body weight
reports of carcinogenicity: ntp: unknown iarc: no osha: no
health hazards acute and chronic: skin: prolonged or repeated skin
contact may cause skin irritation.
explanation of carcinogenicity: in accordance with current osha hazard
communication standard criteria, this product does not require a
cancer hazard warning. Product is not characterized by current iarc
classification criteria.
effects of overexposure: prolonged or repeated skin contact: skin
irritation. Symptoms from acute exposure in confined spaces may
include headache, eye, nose & throat irritation.
medical cond aggravated by exposure: none recognized
First aid: eyes: flush with clear water for 15 minutes or until
irritation subsides. If irritation persists, call a physician.
skin: remove contaminated clothes & wash skin with soap & water. If
injected into or under skin, have individual should be evaluated
by physician as a surgical emergency. Inhalation: if overcome by
fumes/mists, immediately remove from exposure. If breathing
irregular or stopped, star t resuscitation; give oxygen. Ingestion:
do not induce vomiting! Call physician immediately.
Hcc: v6
boiling pt: >400.C, 752.F
b.P. Text: 752f-1004f
melt/freeze pt: =-54.C, -65.2f
m.P/f.P text: pour point astm d-97
vapor pres:
vapor density: >5(air =1)
spec gravity: 0.995(15.6c)
ph: neutral
viscosity: 5.2 cst @ 210f
evaporation rate & reference:
solubility in water: negligible,
appearance and odor: clear liquid, dark amber color mild fatty odor.
percent volatiles by volume: negligible
Stability indicator/materials to avoid: yes
avoid contact with strong oxidants such as liquid chlorine,
concentrated oxygen, sodium hypochlorite, calcium hypochlorite, etc
as this presents a serious explosion hazard.
stability condition to avoid: no data provided by manufacturer
hazardous decomposition products: fumes, smoke, carbon monoxide, sulfur
oxides, nitrogen oxides, phosphorus oxides, aldehydes and other
decomposition products, in case of incomplete combustion.
Waste disposal methods: options for disposal of this product depend on
the conditions under which it was used. To determine the proper
method of diposal, refer to rcra (40 cfr 261), as well as federal
epa and state and local regulations.
Ingred name: synthetic polyol fatty acid esters
minumum % wt: 90.
maxumum % wt: 95.
ingred name: phosphoric acid, tris(methylphenyl) ester (ortho isomer is
less than 0.1%)
cas: 1330-78-5
rtecs #: td0175000
< wt: 2.
ingred name: mixed aromatic amines
< wt: 5.
Health hazards acute and chronic: eye-product is expected to be no more
than mildly irritating to the eye. Skin-product is expected to be
no more than mildly irritating to the skin. Prolonged and/or
repeated skin contact may result in absorption of tricresyl
phosphate which could lead to delayed neurotoxicity. Release during
high pressure usage may result in injection of oil into the skin
causing local necrosis. Inhalation-inhalat ion of vapors (generated
at high temperatures only) or oil mist from this product may be
mildly irritating to the nose, throat and respiratory tract.
ingestion-this product could be toxic.
effects of overexposure: irritation as noted above. Delayed
neurotoxicity may be evidenced by numbness & tingling of the hands
& feet, weakness & cramps, & unsteady gait. Local necrosis is
evidenced by delayed onset of pain a nd tissue damage a few hours
following injection.
medical cond aggravated by exposure: preexisting eye, skin, respiratory
and nerve disorders may be aggravated by exposure to this product.
First aid: eyes-flush with plenty of water for 15 mins while holding
eyelids open. Get medical aid. Skin-remove contaminated
clothing/shoes & wipe excess from skin. Flush skin with water.
follow by washing with soap & water. If irritation occurs, get
medical aid. If material is injected under the skin. Get medical
aid promptly to prevent serious injury. Inhalation-remove victim to
fresh air & provide oxygen if breathing is difficult. Get medical
aid. Ingestion-do not give liquids if victim is unconscious or very
drowsy. Give no more than 2 glasses of water & induce vomiting by
giving 30cc syrup of ipeca c. Get medical aid.
Hcc: n1
spec gravity: .99 (approx.)
viscosity: 100 deg f 28.0cst
solubility in water: negligible
appearance and odor: clear liquid.
Stability indicator/materials to avoid: yes
avoid heat, flame and contact w ith strong oxidizing agents.
stability condition to avoid: avoid heat, flame and contact with strong
oxidizing agents.
hazardous decomposition products: thermal decomposition products are
highly dependent on the combustion conditions. A complex mixture of
airborne solid, liquid, particulates & gases will evolve when this
material undergoes pyrolysis or
conditions to avoid polymerization: will not occur.
Waste disposal methods: place in an appropriate disposal facility in
compliance with local regulations.
Ingred name: synthetic ester
cas: 68424-31-7
> wt: 90.
ingred name: synthetic ester
cas: 68424-33-9
> wt: 90.
ingred name: octylated n-pheny-1-naphthalenamine
cas: 68259-36-9
< wt: 2.
ingred name: p,p'-dioctyldiphenylamine
cas: 101-67-7
< wt: 2.
ingred name: tricresyl phosphate
cas: 1330-78-5
rtecs #: td0175000
= wt: 1.
ingred name: minor additives
< wt: 1.
Ld50 lc50 mixture: not available for product.
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eye contact: mildly irritating. skin
contact: mildly irritating. Prolonged/repeated contact may result
in absorption of tricresyl phosphate which could lead to delayed
neurotoxicity. Release during h igh pressure may result in
injection of oil into skin causing local necrosis. Inhalation:
vapors, generated at high temperatures only, or oil mists from
product may be mildly irritating to the nose, throat, and
respiratory tract. Could lead to delayed neurotoxicity. ingestion:
could be toxic if swallowed, resulting in delayed neurotoxicity.
explanation of carcinogenicity: this product does not contain any
carcinogens as identified by iarc, ntp, or osha.
effects of overexposure: irritation as noted in health hazard. Delayed
neurotoxicity may be evidenced by numbness and tingling of the
hands and feet, weakness and cramps, and unsteady gait. Local
negrosis is evidenced by dela yed onset of pain and tissue damage a
few hours following injection.
medical cond aggravated by exposure: preexisting eye, skin, respiratory
and nerve disorders may be aggravated by exposure to this product.
First aid: eye contact: flush with plenty of water for 15 min. While
holding eyelids open. Get medical attention. Skin contact: remove
contaiminated clothing/shoes and wipe excess from skin. Flush with
water. Fo llow by washing with soap and water. If irritation
occurs, get medical attention. Do not reuse clothing until cleaned.
contaminate leather articles, including shoes, cannot be
decontaminated and shoul d be destroyed. If material injected under
skin, seek medical attention. inhalation: move to fresh air.
(contd. See " other info.").
Hcc: v6
boiling pt: b.P. Text: not available
melt/freeze pt: m.P/f.P text: not available
decomp temp: decomp text: none provided by mfr
vapor pres: not available
vapor density: not availa
spec gravity: .99 (h2o=1) approx.
ph: none provided
viscosity: 28.0 cst @ 100 deg f
evaporation rate & reference: not available
solubility in water: negligible.
appearance and odor: clear liquid.
percent volatiles by volume: none provide
corrosion rate: none provided by mfr
Stability indicator/materials to avoid: yes
contact with strong oxidizing agents.
stability condition to avoid: avoid heat, flame.
hazardous decomposition products: thermal decomposition products
dependent on conditions. Mixture of airborne solid, liquid,
particulates, gases evolve during pyrolysis or combustion. Carbon
monoxide and other organic compounds formed
conditions to avoid polymerization: will not occur.
Waste disposal methods: place in an appropriate disposal facility in
compliance with local regulations. Under epa-cwa, this product is
considered an oil under section 311. Spills into or leading to
surface waters that cause a sheen must be reported to the national
response center, 800-424-8802.
Ingred name: synthetic ester
cas: 67762-53-2
fraction by wt: 0% t0 >9%
ingred name: synthetic ester
cas: 67762-52-1
fraction by wt: 0% t0 >90%
ingred name: octylated n-phenyl-1-naphthylamine
cas: 68259-36-9
< wt: 2.
ingred name: p,p-dioctyldiphenylamine
cas: 68411-46-1
< wt: 2.
ingred name: tricresyl phosphate (mixed isomers)
cas: 1330-78-5
rtecs #: td0175000
= wt: 1.
ingred name: minor additives (mixture)
< wt: 1.