Secure Ordering: +1 (757) 528-8028
NationalStockNumber.info
NationalStockNumber.INFO

Worldwide distributor of NSN parts and consumables located in the USA.

Epoxy Coating Kit

NSN: 8010-00-410-8458 | Model: MIL-P-24441

A finish coat material composed of a base compound and an accelerator. The base material consists of an epoxy resin which is a reaction product of epichlorohydrin. The activator is normally a polyamide, polyamine, or similar compound. Usually, for colored epoxy finishes, only the base material contains pigment or dye, but both base and activator may be colored. The material may also be furnished with pigment separate from both base compound and accelerator.

NSN Properties and Flags
NATO Stock Number
8010-00-410-8458
DEMIL
NO
Content Within Each Unit Package
Consists of 1 gallon of component a and 1 gallon of component b to equal 2 gallons
Gloss Designation
Semigloss
Vehicle Material Type
Epoxy resin
Color Chip Number
26270
Color
Gray
Nondefinitive Specification/std Data
1 type and 151 formula

Inventory Check

The last inventory check on this NSN was done on 04/26/2024. Due to rapid changes in inventory this may not be the current stock qty.

  • New: 80

Pricing and Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Qty:
Email Address:
Phone Number:
Your name:
Company:
Privacy    Terms

Certified Quality Assurance  Quality check icon

  •   ISO 9001:2015 + AS9120B
  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

NSN 8010-00-410-8458 Datasheet

Supply Class (FSC):
Related Products Varnishes Dopes Paints
Cross Reference:
  • MIL-P-24441
  • MIL-P-24441/2 TY1FA151
Cage Codes:
  • Military Specifications (CAGE 81349)
  • General Services Administration (CAGE 80244)
Schedule B & Trade:
  • Schedule B: 3907300000 (NAICS 325211)

    Epoxide resins

  • SITC: 57420

    Epoxide resins, in primary forms

  • End Use: 12500

    Plastic materials

Identification:
HMIC

Y - Indicates information is in the hazardous materials information resource system (hmirs).

PMIC

A - Item does not contain precious metal.

CRITL

- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Freight Information:
  • NMFC:

    149980 - Paint and related materials

  • WCC:

    620 - Paint, in individual containers less than 10 cubic ft

  • SHC:

    9 - Other or no special handling required (sh)

  • ADC:

    A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

  • ACC:

    B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater

  • TCC:

    R - Flammable liquids, un class 3 (flammable liquids label)

  • LTL:

    W - Rating variable

NSN Management Codes:
  • SOS
    Gsa
  • AAC
    Y
  • Quantity per pack
    No qup
  • Unit of Measure
    Kt
  • Shelf Life
    24 mo.
  • Classification Control
    U
  • MGMT_CTL
    9q----f
  • Repariability

Questions & Answers:

What are the historical prices recorded for this stock number?
Historical data shows pricing from $222.71 to $371.18..
Does NSN 8010-00-410-8458 have a shelf life?
No. There is no shelf life applicable for this NSN.
What NATO entities are users of this NSN?
Spain, New Zealand, Germany, Philippines, Greece, and Turkey
What is the NIIN of NSN 8010-00-410-8458?
004108458 or 00-410-8458
Does NSN 8010-00-410-8458 require demilitarization?
Yes - ITAR Controlled
What is the most recent solicitation for NSN 8010-00-410-8458?
No solicitations for this NSN.
When was this national stock number assigned to the federal catalog?
Jan 28, 1972
MSDS

Material Safety

MSDS BDXYY F-151,HAZE GRAY BASE,MIL-P-24441/2,5808

Hazards

Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: chronic overexposure to,and misuse
of,solvents has been linked to permanent brain and nervous system
damage.Skin: possible dermatitis.

explanation of carcinogenicity: none
effects of overexposure: inhal: irritation of respiratory
tract,headache,dizziness and
unconsciousness.Skin: irritating.Eyes: severe
irritation,redness,tearing and blurred
vision.Ingest: gastro-intestinal irritation,nausea,vomiti
ng,diarrhea.

medical cond aggravated by exposure: n/k

First Aid

First aid: inhal: remove to fresh air.Give artificial respiration if
needed.Get medical attention.Skin: remove contaminated clothing.Wash
skin with plenty of soap and water.Launder clothes before
reuse.Eyes: flush immediately with large quantities of h*2o for at
least 15 minutes.Get medical attention immediately.Ingest: call a
physician immediately to determine whether or not to induce
vomiting.

Chemical Properties

Hcc: f3
boiling pt: b.P. Text: 244f,118c
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: n/k
vapor density: >1 (air=1)
spec gravity: 1.2861
evaporation rate & reference: slower than ether
solubility in water: n/k
appearance and odor: n/k
percent volatiles by volume: 34

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents.

stability condition to avoid: store away from direct heat,flame or
spraks.

hazardous decomposition products: carbon monoxide,carbon dioxide,various
hydrocarbon fragments.

Proper Disposal

Waste disposal methods: disposal must be in accordance with
federal,state and local regulations .Do not incinerate unopened
containers.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 30-35%
other rec limits: n/k
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

MSDS BDXYZ F-151,HAZE GRAY,REACTOR,MIL-P-24441/2,5806

Hazards

Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: chronic overexposure to,and misuse
of,solvents has been linked to permanent brain and nervous system
damage.

explanation of carcinogenicity: none
effects of overexposure: eyes: irritation with redness,tearing and
blurred vision.Skin: irritation;possible dermatitis,sensitization or
other allergic responses.Inhalation: may cause
irritation.Ingestion: may cause gastro-intesti nal irritation.

medical cond aggravated by exposure: repeated exposure may cause
sensitization in certain people.

First Aid

First aid: eyes: flush immediately with copious quantities of water for
at least 15 minutes.Get medical attention immediately.Skin: remove
contaminated clothing;wash skin with plenty of soap and
water.Launder clot hes before reuse.Inhalation: remove to fresh
air.Give artificial respiration if needed.Get medical
attention.Ingestion: call a physician immediately to determine
whether or not to induce vomiting.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: 303f,153c
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: n/k
vapor density: >air
spec gravity: 1.2139
evaporation rate & reference: slower than ether
solubility in water: n/k
appearance and odor: n/k
percent volatiles by volume: 25

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents.

stability condition to avoid: store away from heat,flame or spark.

hazardous decomposition products: carbon monoxide,carbon dioxide,various
hydrocarbon fragments,aldehydes.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: disposal must be in accordance with
federal,state and local regulations .Do not incinerate unopened
containers.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: aromatic solvent,naphtha (petroleum),light.Vapor pressure 3
mmhg
cas: 64742-95-6
fraction by wt: 20-25%
other rec limits: 100 ppm
osha pel: n/k
acgih tlv: n/k

ingred name: epoxy resn (proprietary)
fraction by wt: 45-50%
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k

MSDS BDXZB MIL-P-24441/2,FORM 151,HAZE GRAY,COMP A

Hazards

Effects of overexposure: eye: famage & pain. Skin: irritation. Vapors: resp
tract irrit,dizzy,nausea,loss of consciousness.

First Aid

First aid: eye: flush with water 15 min,get medical attn. Skin: wash with
soap and water. Inhaltion: remove from exposure,give artifresp if
needed,get medical attention.

Chemical Properties

Hcc: f3
boiling pt: b.P. Text: 243f/117c
vapor pres: 4.2
vapor density: 2.6
spec gravity: 1.28
evaporation rate & reference: 0.43(buty acet)
solubility in water: negligible
appearance and odor: normal for a paint or coating type product.

percent volatiles by volume: 52

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers
hazardous decomposition products: ammonia compounds,nitrogen
oxide,co*2,co

Proper Disposal

Waste disposal methods: dispose in chemical disposal area or in a manner
thatcomplies with local,state and federal regulations. Do not
incinerate closed containers.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 35%
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: polyamide based resin
fraction by wt: 20%

ingred name: amidoamine reactant
fraction by wt:

MSDS BDXZC MIL-P-24441/2,FORM 151, HAZE GRAY,COMP B

Hazards

Effects of overexposure: eye/skin: irritation. Vapors: resp tract
irrit,dizziness,nausea,loss of consciousness.

First Aid

First aid: eye: flush with water 15 min.Skin: wash with soap and
water.Inhalation: remove from exposure,give artif resp if needed,get
med attn.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: 315f/157c
vapor pres: 3
vapor density: 4
spec gravity: 1.24
evaporation rate & reference: 0.16 (butyl acet)
solubility in water: negligible
appearance and odor: normal for a paint or coating type product.

percent volatiles by volume: 35

Reactivity

Stability indicator/materials to avoid: yes
hazardous decomposition products: carbon dioxide,carbon monoxide

Proper Disposal

Waste disposal methods: dispose in chemical disposal area or in a manner
thatcomplies with local,state and federal regulations.Do not
incinerate closed containers.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: naphta (petroleum spirits or benzin)
cas: 8030-30-6
rtecs #: de3030000
fraction by wt: 25%
osha pel: 100 ppm

ingred name: epoxy resin
fraction by wt: 50%

MSDS BDXZG MD-8959, HAZE GRAY, MIL-P-24441/2 PART A

Hazards

Effects of overexposure: inhal: headache, nausea, diz. Skin: prlngd/rptd
contact may cause irrit. Avoid eye contact.

First Aid

First aid: skin: immediately flush w/large amounts of water. Remove
contaminated clothing. Eye: immediately flush w/water for at least
15 min. Call md. Inhal: move to fresh air.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: 241 to 246f
vapor pres: 55
vapor density: 2.55
spec gravity: 1.28
evaporation rate & reference: slower than ether
solubility in water: moderate
appearance and odor: mobile, containing volatile liquids
percent volatiles by volume: 52.7

Reactivity

Stability indicator/materials to avoid: yes
oxidizing materials, rubber softens
hazardous decomposition products: co, co*2

Proper Disposal

Waste disposal methods: dispose of in closed containers away from
ignition sources. (mfg rec)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: amino-amide (as vehicle)
fraction by wt: 22.3%

ingred name: pigments (type not specified)
fraction by wt: 44.2%

ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 33.6%
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

MSDS BDXZH MD-8289, NEUTRAL, MIL-P-24441/2 PART B

Hazards

Effects of overexposure: inhal: headache, nausea, diz. Skin: prlngd/rptd
contact may cause irrit. Avoid eye contact.

First Aid

First aid: skin: immediately flush w/large amounts of water. Remove
contaminated clothing. Eye: immediately flush w/water for at least
15 min. Call md. Inhal: move to fresh air.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: 315 to 349f
vapor pres: 3.

spec gravity: 1.21
evaporation rate & reference: 0.2 n-butyl acet
solubility in water: negligible
appearance and odor: mobile, containing volatile liquids
percent volatiles by volume: 35.6

Reactivity

Stability indicator/materials to avoid: yes
oxidizing materials, rubber softens
hazardous decomposition products: co, co*2

Proper Disposal

Waste disposal methods: dispose of in closed containers away from
ignition sources. (mfg rec)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: pigments (type unspecified)
fraction by wt: 24.2%

ingred name: epoxy (vehicle)
fraction by wt: 44/3%

ingred name: naphta (petroleum spirits or benzin)
cas: 8030-30-6
rtecs #: de3030000
fraction by wt: 31.5%
osha pel: 100 ppm

MSDS BDXZJ MIL-P-24441

Hazards

Effects of overexposure: irrit to eyes/throat could cause death from
brthng or explosion

First Aid

First aid: call md, do not induce vomit, wash eyes/skin. Remove to fresh
air.

Chemical Properties

Hcc: f3
spec gravity: 10.4-9
solubility in water: negligible
appearance and odor: paint odor
percent volatiles by volume: 53.0

Reactivity

Stability indicator/materials to avoid: yes

Proper Disposal

Waste disposal methods: absorbent matls, residual on lg spills
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: polyamide
cas: 63428-83-1
rtecs #: rf5250000

MSDS BDXZK MIL-P-24441

Hazards

Effects of overexposure: irrit to eyes/throat could cause death from
brthng or explosion

First Aid

First aid: call md. Do not induce vomit, wash eyes/skin, remove to fresh
air.

Chemical Properties

Hcc: f4
spec gravity: 10.4-9
solubility in water: negligible
appearance and odor: paint odor
percent volatiles by volume: 53.0

Reactivity

Stability indicator/materials to avoid: yes

Proper Disposal

Waste disposal methods: absorbent matls, residual on lg spills
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: polyamide
cas: 63428-83-1
rtecs #: rf5250000

MSDS BDXZL F-151,HAZE GRAY TOPCOAT 5434,MFR G-453

Hazards

Effects of overexposure: inh: anesth. Irrit resp tract. Acute cns
depress: hdache, dizz, unconsc, coma. Skin/eye irrit.

First Aid

First aid: inh: remove from exposure. Restore brth. Keep warm/quiet.

call md. Eyes: flush immed w/lg amt water 15 min. Take to md. Skin:
wash w/ater. Remove contam clothing. Consult md.

Chemical Properties

Hcc: f3
boiling pt: b.P. Text: 241-247f
vapor pres: 4
evaporation rate & reference: slower than ether
percent volatiles by volume: 52.9

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: hi temps & contam w/foreign matls
hazardous decomposition products: haz fumes when heated decomp

Proper Disposal

Waste disposal methods: dispose iaw local, state, fed reg. Incinerate in
apprvd facility. Do not incinerate closed cntnrs.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 33.6%
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: polyamide epoxy adduct
fraction by wt: 19.5%

MSDS BDXZM F-151,HAZE GRAY TOPCOAT 5435,MFR N-113

Hazards

Effects of overexposure: inh: anesth. Irrit resp tract. Acute cns
depress: hdache, dizz, unconsc, coma. Skin/eye irrit.

First Aid

First aid: inh: remove from exposure. Restore brth. Keep warm/quiet.

call md. Eyes: flush immed w/lg amt water 1 min. Take to md. Skin:
wash w/water. Remove contam clothing. Consult md.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: 311-344f
evaporation rate & reference: slower than ether
percent volatiles by volume: 34.6

Reactivity

Stability indicator/materials to avoid: yes
stability condition to avoid: hi temps & contam w/foreign matls
hazardous decomposition products: haz fumes when heated decomp

Proper Disposal

Waste disposal methods: dispose iaw local, state, fed reg. Incinerate in
apprvd facility. Do not incinerate closed cntnrs.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin
fraction by wt: 43.6%

ingred name: n-butyl glycidyl ether (bge)
cas: 2426-08-6
rtecs #: tx4200000
fraction by wt: 5.9%
osha pel: 50 ppm
acgih tlv: 25 ppm; 9293

ingred name: aromatic hydrocarbon, exxon aromatic 100.Formerly solvesso
100,contains alkylated benzene
fraction by wt: 24.7%
acgih tlv: 100ppm, mfr

ingred name: magnesium silicate
fraction by wt: 24.8%

ingred name: castor oil derivative
rtecs #: fi4100000
fraction by wt: 1.0%

MSDS BHCNH MD8289,FORM 151,NEUTRL,PT.B,MIL-P-24441

Hazards

Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: see signs & symptoms of overexposure .

explanation of carcinogenicity: not applicable .

effects of overexposure: acute: brthng-irri of resp
tract;hdache,nausea,dizz,weaknss & fatigue.Extreme expo can rsult
in unconsciousnss & even resp arrest.Skn/eye cntct-primary irri
ingest: can cause stomach &/intestnl irri, na usea,vom &
diarrhea.Chronic: may cause permanent brain & nervous system damage
& disease of the lungs.

medical cond aggravated by exposure: none, when used in accordance
w/safe handling & use information.

First Aid

First aid: eyes: flush iime w/lge amts of wtr for at least 15 min.Get med
attn,inhal: remove from exposure support breathing (give
o*2/artificial respiration).If cont in diff is experienced,summon
med attn i mme. Skin: wash affected areas w/soap & wtr. Get medical
assistance if irritation persists. Ingestion: consult a physician
immediately.

Chemical Properties

Boiling pt: b.P. Text: 313-500f or
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: n/k
vapor density: hv thn air
spec gravity: 1.25
evaporation rate & reference: slower than ether
solubility in water: n/k
appearance and odor: n/k
percent volatiles by volume: 34.87
corrosion rate:

Reactivity

Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.

stability condition to avoid: n/k
hazardous decomposition products: may cause hazardous fumes when heated
to decomposition. Fumes may contain carbon monoxide & carbon
dioxide.

Proper Disposal

Waste disposal methods: dispose of in accordance with local, state, &
federal regulations. Incinerate only in approved facility. Do not
incinerate closed containers.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 50%
other rec limits: n/established
osha pel: n/k
acgih tlv: n/k

ingred name: talc (containing no asbestos)
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 25%
other rec limits: n/established
osha pel: 2 mg/m3 rdust
acgih tlv: 2 mg/m3 rdust; 9192

ingred name: high flash naphtha, vapor pressure: 10.3
cas: 64742-95-6
fraction by wt: 25%
other rec limits: n/established
osha pel: n/k
acgih tlv: n/k

MSDS BHFYM MD8959,FORMLA 151 HAZE GRY PT A,MIL-P-24441

Hazards

Ld50 lc50 mixture: n/k
routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: see signs & symptoms of overexposure
section .

explanation of carcinogenicity: not applicable .

effects of overexposure: acute: brthng irri of resp
tract;hdache,nausea,dizz,weaknss & fatigue,extreme expos can rsult
in unconsciousnss & even resp arrest.Skn/eye-primary irri.Inges: can
cause stomach &/intestnl irri,nausea,vo miting &
diarrhea,chronic: may cause permanent brain damage & nervous system
damage & disease of the lungs.

medical cond aggravated by exposure: none,when used in accordance with
safe handling & use information.

First Aid

First aid: eyes: flush imme w/lge amts of wtr for at least 15 min.Get med
attn. Inhal: remove to fresh air. Support breathing (give
o*2/artificial respiration). If continued difficulty is
experienced, summon medical assistance imme. Inges: consulta
physician immediately. Skin: wash affected areas w/soap & water.

remove soiled clothing. Get medical assistance if irritation
persists.

Chemical Properties

Boiling pt: b.P. Text: 243f/117c
melt/freeze pt: m.P/f.P text: n/k
decomp temp: decomp text: n/k
vapor pres: n/k
vapor density: hv thn air
spec gravity: 1.28
evaporation rate & reference: slower than ether
solubility in water: n/k
appearance and odor: n/k
percent volatiles by volume: 52.88
corrosion rate:

Reactivity

Stability indicator/materials to avoid: yes
avoid contact with strong oxidizing agents.

stability condition to avoid: n/k
hazardous decomposition products: may cause hazard fumes when heated to
decomp.Fumes may cntain carbon monoxide,carbon dioxide, oxides of
nitrogen.

Proper Disposal

Waste disposal methods: disposemof,in accordance with local, state &
federal regulations. Incinerate only in approved facility. D0 not
incinerare closed containers.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: talc (containing no asbestos)
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 35%
other rec limits: n/k
osha pel: 2 mg/m3 rdust
acgih tlv: 2 mg/m3 rdust; 9192

ingred name: titanium dioxide
fraction by wt: 10%
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k

ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 35%
other rec limits: n/k
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: polyamide resin
fraction by wt:
other rec limits: n/k
osha pel: n/k
acgih tlv: n/k

MSDS BLTYJ PAINT EPOXY, POLYAMIDE, EXT TOPCOAT HAZE FOR

Hazards

Health hazards acute and chronic: inhal: auditory nerve/vestibular
injury, hearing loss, lung hemorage. Mild irrit to resp tract,
pulmonary injury and central nerv sys depress. Narcosis, ataxia
(death in some animals). Skin: irrit, de fatting. Eye: severe
irrit. Ingest: gastrointestinal irrit, paralysis, nystagmus,
salivation, marked hepatic hepermia.*
effects of overexposure: inhal: fatigue, headache, vertigo, sore throat,
coughing, nausea, shortness of breath, dizziness, dullness,
drowsiness, giddiness, prostration, unconsciousness. Skin: redness,
dryness. Eye: redness, t earing & blurred vision. Ingest: reduced
corneal/pupillary/ciliary reflexes, reduced body temp &
respiration.

medical cond aggravated by exposure: because of its irritating and
defatting properties. This material may aggravate an existing
dermatitis. Breathing vapor and/or mist may aggravate asthma and
inflammatory or fibrotic pulmonary disease.

First Aid

First aid: ingest: give 2 glasses of water. Don't induce vomit. Call
physician. Skin: remove contam clothing & flush skin w/water. wash
clothes before reuse. Inhal: remove to fresh air. Give artif
respiration i f not breathing. Qualified personnel may give oxygen
if breathing is difficult. Call physician. Eyes: immed flush
w/water--15 min. Obtain med attn, preferably from an opthalmologist
urgently.

Chemical Properties

Hcc: f3
boiling pt: b.P. Text: 244f,118c
melt/freeze pt: m.P/f.P text: 0f,-18c
decomp temp: decomp text: 600f,316c
vapor pres: 2.7mmhg@77
vapor density: 2.55 @ 77f
spec gravity: 1.27 (water=1)
viscosity: 75-96ku @ 25c
evaporation rate & reference: 0.5 (bu ac=1)
solubility in water: 7.45 @ 77f
appearance and odor: medium gray liquid with alcohol odor.

percent volatiles by volume: 53.3

Reactivity

Stability indicator/materials to avoid: yes
can react with oxidizing material when heated to decomposition.

stability condition to avoid: high temperatures.

hazardous decomposition products: carbon monoxide

Proper Disposal

Waste disposal methods: assure conformity with applicable disposal
regulations of absorbed material at an approved disposal site or
facility. Dispose in conformity with federal & state regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: magnesium silicate-talc (non-asbestiform)
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 35%
other rec limits: none specified
osha pel: 20 mppcf resp
acgih tlv: 2 mg/cum

ingred name: n-butyl alcohol, n-butanol
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 34%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: voc: 432 grams/liter or 3.6 lbs/gal.

rtecs #: 9999999vo
other rec limits: none specified

MSDS BLTYK PAINT EPOXY POLYAMIDE, EXT TOPCOAT HAZ GRA

Hazards

Health hazards acute and chronic: irritation to eyes and respiratory
tract. Central nervous system effects.

effects of overexposure: headaches, dizziness, and anesthetic.

medical cond aggravated by exposure: pre-existing eye, skin and
respiratory disorders may be aggravated by exposure to this
product.

First Aid

First aid: eye contact: flush with water 15 min or until irritation
subsides, if irritation persists call physician. Skin contact:
remove contaminated clothing and wash thoroughly with soap and
water. Inhalation : if overcome by vapors remove to freshair, call
physician. Ingestion: do not induce vomiting, call physician.

Chemical Properties

Hcc: f3
boiling pt: b.P. Text: 318f,159c
melt/freeze pt: m.P/f.P text: 0f,-18c
decomp temp: decomp text: 600f,316c
vapor pres:
vapor density: 4.2 @ 77f
spec gravity: 1.23 (water=1)
viscosity: 60-80 ku @77f
evaporation rate & reference: 0.37 (bu ac=1)
solubility in water: negligible
appearance and odor: cloudy translucent liquid with kerosene odor.

percent volatiles by volume: 34.5

Reactivity

Stability indicator/materials to avoid: yes
can react with oxidizing material when heated to decomposition.

stability condition to avoid: high temperatures
hazardous decomposition products: carbon monoxide.

Proper Disposal

Waste disposal methods: assure conformity with applicable disposal
regulations. Dispose of absorbed material at an approved disposal
site or facility. Dispose in conformity with state and federal
regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: super hiflash naphtha
cas: 64742-95-6
fraction by wt: 25%
other rec limits: none specified
acgih tlv: 100 ppm

ingred name: magnesium silicate-talc (non-asbestiform)
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt: 24%
other rec limits: none specified
osha pel: 20 mppcf
acgih tlv: 2 mg/cum

ingred name: voc: 310 grams/liter or 2.59 lbs/gal
rtecs #: 9999999vo
other rec limits: none specified

MSDS BMQSK F-151 HAZE GRAY EXT TOPCOAT COMP A

Hazards

Ld50 lc50 mixture: ld50 butyl alcohol 2.5 g/kg; *
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: vapor, spray mist/dust can be harmful.

irrit to skin, mucous membranes, eyes & resp system. Excess inhal
can cause headache, nausea, dizziness or asphyxiation.

repeated/prolonged occupational overexpo s to solvents is
associated with permanent brain & nervous system damage. Can be
harmful/fatal if swallowed. Overexpos**
effects of overexposure: **can damage blood, central nervous system.

ingestion or overexposure can cause lung, kidney, liver damage.

overexposure can cause severe eye & skin burns &/or injury. Skin &
resp sensitization & alle rgic reactions such as rash, hives or
asthma can occur.

medical cond aggravated by exposure: respiratory. Kidney and liver
disorders.

*titanium dioxide 24 g/kg; amido amine resin 3.4 g/kg; lc50
titanium dioxide 6820 ppm. Butyl alcohol 8000 ppm.

First Aid

First aid: overexpos to vapor, spray mist or dust: provide fresh air; if
breathing labored, give oxygen or artificial respiration. For skin
contact, wash thoroughly w/soap & water. For eyes, flush
immediately w/ plenty of water for at least 15 min & get medical
attention. If swallowed, drink 1-2 glasses of water to dilute.

don't induce vomiting. Consult dr or poison control ctr immed.

treat symptomatically.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: 244 to 282f
vapor density: > air
evaporation rate & reference: (bu ac=1)low .43;high .70
appearance and odor: liquid, solvent odor.

percent volatiles by volume: 55

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers, acids, alkalies, epoxies under uncontrolled
conditions.

stability condition to avoid: heat, open flame, arc or sparks.

hazardous decomposition products: by fire, burning or welding: co and
co2. Nox.

Proper Disposal

Waste disposal methods: in separate, closed metal container in
accordance with all applicable regulations. Epa waste no: d001,
u031, u239.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: magnesium silicate (respirable quartz
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt:
other rec limits: none specified
osha pel: 2 mg/m3
acgih tlv: 2 mg/m3

ingred name: butyl alcohol (sara 313) (cercla) (vapor pressure 4.3 mm hg
@ 68 f) (skin)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 33.54%
other rec limits: none specified
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9293
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: polyamide adduct resin (
fraction by wt:
other rec limits: none specified

ingred name: titanium dioxide (as ti, possible impurities,
amporphorus ,
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits: none specified
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9293

ingred name: amido amine resin (tepa @
fraction by wt:
other rec limits: none specified

ingred name: xylene (sara 313) (vapor pressure 6.6 mm hg @ 68 f)
(benzene @ 0-900 ppm--calif title 26: 22-1200 prop 65 )
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 1.21%
other rec limits: none specified
osha pel: 100 ppm/435 mg/m3
acgih tlv: 100 ppm/435 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BMQSL F-151 HAZE GRAY EXT TOPCOAT COMP B

Hazards

Ld50 lc50 mixture: ld50 2.9g/kg; lc50 19.9 ppm more on file
health hazards acute and chronic: vapor, spray mist/dust can be harmful.

irrit to skin, mucous membranes, eyes & resp system. Excess inhal
can cause headache, nausea, dizziness or asphyxiation.

repeated/prolonged occupational overexpo s to solvents is
associated with permanent brain & nervous system damage. Can be
harmful/fatal if swallowed. **
effects of overexposure: **harmful if inhaled or absorbed through the
skin. Overexposure can damage central nervous system. Ingestion or
overexposure can cause lung, kidney, liver damage. Skin & resp
sensitization & allergic reactions such as rash, hives or
asthmacan occur.

medical cond aggravated by exposure: respiratory. Kidney & liver
disorders. Allergies. Skin.

First Aid

First aid: overexpos to vapor, spray mist or dust: provide fresh air; if
breathing labored, give oxygen or artificial respiration. For skin
contact, wash thoroughly w/soap & water. For eyes, flush
immediately w/ plenty of water for at least 15 min & get medical
attention. If swallowed, drink 1-2 glasses of water to dilute.

don't induce vomiting. Consult dr or poison control ctr immed.

treat symptomatically.

Chemical Properties

Hcc: f3
boiling pt: b.P. Text: 282 to 336f
vapor density: > air
spec gravity: 10.3 lb/gl
evaporation rate & reference: (bu ac=1)low .37;high .70
appearance and odor: liquid, solvent odor.

percent volatiles by volume: 34

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizers, acids, alkalies.

stability condition to avoid: heat, open flame, arc or sparks.

hazardous decomposition products: by fire, burning or welding: co and
co2. Nox. Aldehydes.

Proper Disposal

Waste disposal methods: in separate, closed metal container in
accordance with all applicable regulations. Epa waste no: d001,
u239, u055.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin (epch @
title 26: 22-1200 prop 65 )
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt:
other rec limits: none specified
acgih tlv: 2 ppm skin;10 mg/m3

ingred name: magnesium silicate (respirable quartz
cas: 14807-96-6
rtecs #: ww2710000
fraction by wt:
other rec limits: none specified
osha pel: 2 mg/m3
acgih tlv: 2 mg/m3

ingred name: high flash naphtha (sara 313) (vapor pressure 2.7 mm hg @
68 f) (benzene 0-900 ppm--calif title 26: 22-1200 prop 65 )
cas: 64742-95-6
fraction by wt: 12.94%
other rec limits: mfr tlv 50 ppm
acgih tlv: 50 ppm

ingred name: 1,2,4-trimethyl benzene (sara 313)
cas: 95-63-6
rtecs #: dc3325000
fraction by wt: 6.29%
other rec limits: none specified
acgih tlv: 25 ppm/125 mg/m3

ingred name: trimethyl benzene
cas: 25551-13-7
rtecs #: dc3220000
fraction by wt: 3.02%
other rec limits: none specified
acgih tlv: 25 ppm/ 125 mg/m3

ingred name: polyamide
fraction by wt:
other rec limits: none specified

ingred name: xylene (sara 313) (vapor pressure 6.6 mm hg @ 68 f)
(benzene @ 0-900 ppm--calif title 26: 22-12000 prop 65 )
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 1.21%
other rec limits: none specified
osha pel: 100 ppm/435 mg/m3
acgih tlv: 100 ppm/435 mg/m3
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BTSWP MIL-P-24441/2B F-151 TYPE 1 HAZE GRAY EXIT TOPCOAT COMP B

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: vapor or spray mist can be harmful.

irritating to eyes, skin, nose and throat. Repeated and prolonged
occupational exposure to solvents associated with permanent brain
and nervous system damage. Can b e harmful if swallowed.

overexposure can damage central nervous system.

explanation of carcinogenicity: none specified by manufacturer.

effects of overexposure: excessive inhalation can cause headache,
nausea, or dizziness. Overexposure or ingestion can cause lung,
kidney and/or liver damage. Skin sensitization or allergic reaction
can occur such as rash or h ives. Chemical pneumonia. Aspiration
hazard.

medical cond aggravated by exposure: respiratory. Allergies. Kidney and
liver disorders. Skin. Eyes.

First Aid

First aid: overexposure to vapor or mist-provide fresh air; if breathing
labored, give oxygen or artificial respiration. For skin contact,
wash thoroughly with soap and water. For eyes, flush immediately
with pl enty of water for at least 15 min & getmedical attention.

if swallowed, drink 1 or 2 glasses of water to dilute. Do not
induce vomiting. Consult physician or poison control center
immediately.

Chemical Properties

Hcc: f4
boiling pt: b.P. Text: 276-313f
vapor density: >air
evaporation rate & reference: low=0.37, high=0.60
appearance and odor: liquid, solvent odor.

percent volatiles by volume: 34

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents, acids, alkalis.

stability condition to avoid: heat, open flame, arc or spark.

hazardous decomposition products: carbon monoxide, carbon dioxide,
oxides of nitrogen, aldehydes.

conditions to avoid polymerization: will not occur.

Proper Disposal

Waste disposal methods: in seperate, closed metal container in
accordance with all applicable regulations. Epa waste no: d001
u239.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt:
other rec limits: none recommended

ingred name: talc
cas: 14807-96-6
rtecs #: mw2700000
fraction by wt:
other rec limits: none recommended
osha pel: 0.2 fibers/cc
acgih tlv: 0.2 fibers/cc; 9394

ingred name: naphtha, light aromatic
cas: 64742-95-6
fraction by wt: 22.84%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 100 ppm 9091

ingred name: polyamide
fraction by wt:
other rec limits: none recommended

ingred name: xylenes (o-,m-,p- isomers) (sara iii)
cas: 1330-20-7
rtecs #: ze2100000
fraction by wt: 1.2%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: 100 ppm/150stel;9394
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs

MSDS BWDVL F-151A MIL-P-24441/2C #26270, F-09P01

Hazards

Routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: breath of hi vap concen may produce
narcosis.Liq may cause minor skin irrit,definite eye irrit.Causes
nose/throat/eye/skin irrit.May be harmful if absorbed thru
skin.Repeat/prlong overexpo to solvents could cause perm brain &
nervous sys damage.Intention misuse by deliberately concen/inhal
contents may be harmful/fatal
explanation of carcinogenicity: per msds: ingredients not known or
suspected carcinogen.

effects of overexposure: narcosis. Skin/eye irrit. Nose/throat irrit.

brain & nervous sys damage. Misuse may be harmful or fatal.

medical cond aggravated by exposure: none specified by mfg.

First Aid

First aid: inhal: remove to fresh air. Restore breath. Consult physician.

skin: flush w/water for least 15mins. Remove contamin
clothing/shoes. Eye: flush immed w/lg amts of water for least 15min.

consult physician . Ingest: get med attn immed.

Chemical Properties

Hcc: f3
boiling pt: b.P. Text: 243f,117c
vapor density: >air
evaporation rate & reference: slower than ether
solubility in water: insoluble
appearance and odor: solvent odor, liquid.

percent volatiles by volume: supple

Reactivity

Stability indicator/materials to avoid: yes
strong oxidizing agents.

stability condition to avoid: excessive heat, sparks, or open flame.

hazardous decomposition products: none specified by mfg.

Proper Disposal

Waste disposal methods: place in closed containers. Dispose of product
in accordance with local, state and federal regulations.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt: 10%
other rec limits: none recommended
osha pel: 15 mg/m3 tdust
acgih tlv: 10 mg/m3 tdust; 9394

ingred name: magnesium silicate (per msds: 14807-96-6)
cas: 1480-96-6
fraction by wt: 45%
other rec limits: none recommended

ingred name: n-butyl alcohol (sara iii)
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 30%
other rec limits: none recommended
osha pel: 100 ppm
acgih tlv: s, c 50 ppm; 9394
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs

ingred name: volitile organic content (per msds: voc (lb/gal=3.30) units
in gr/liter.

rtecs #: 9999999vc
fraction by wt: 396%
other rec limits: none recommended

MSDS CCBFF MIL-P-24441, F151 BASE

Hazards

Ld50 lc50 mixture: none specified by manufacturer.

routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: severe irritant. May cause
vision impairment even blindness. Corrosive. Causes irreversible
eye damage. Skin: irritating. May result in dermatitis. May cause
sensitization or other allergic resp onses. Inhalation: irritation
of respiratory tract, headache and dizziness and unconsciousness.

(efts of overexp)
explanation of carcinogenicity: not relevant
effects of overexposure: hlth haz: ingestion: gastrointestinal
irritation, nausea, vomiting, diarrhea. Chronic overexposure to and
misuse of solvents has been linked to permanent brain and nervous
system damage.

medical cond aggravated by exposure: skin and respiratory conditions.

First Aid

First aid: eyes: flush immediately with copious quantities of water for
at least 15 minutes. Get medical attention immediately. Skin:
remove contaminated clothing, wash skin with plenty of soap and
water. Launde r clothes before reuse. Inhal: remove to fresh air.

give artificial respiration if needed. Get medical attention.

ingestion: call md immediately to determine whether or not to
induce vomiting.

Chemical Properties

Boiling pt: b.P. Text: 244f,118c
vapor pres: see ings
vapor density: hvr/air
spec gravity: 1.282
evaporation rate & reference: slower than ether
appearance and odor: none specified by manufacturer.

percent volatiles by volume: 35 wt

Reactivity

Stability indicator/materials to avoid: yes
oxidizing agents.

stability condition to avoid: store away from direct heat, flame or
spark.

hazardous decomposition products: carbon monoxide, carbon dioxide,
various hydrocarbon fragments, nitrogen compounds.

Proper Disposal

Waste disposal methods: dispose in accordance with local, state and
federal regulations. Do not incinerate unopened containers.

disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ingredients List

Ingred name: butyl alcohol; (n-butyl alcohol) (sara 313) (cercla) vp:
4.0 @ 20c
cas: 71-36-3
rtecs #: eo1400000
fraction by wt: 30-35%
osha pel: 100 ppm
acgih tlv: 50 ppm, s, c
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
cas: 68410-23-1
fraction by wt: 20-25%
osha pel: n/k
acgih tlv: n/k