NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. It is not designed to act as a primer coating or to be sanded or ground after application. It cannot be wiped off. For items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. Excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.
| Solicitation | Return by Date | Buyer Code | Quantity |
|---|---|---|---|
| SPE8ES20T0413 | 2019-10-28 | PEPCE | 26 KT |
| SPE8ES15T3238 | 2015-09-09 | PEPCE | 736 KT |
The last inventory check on this NSN was done on 05/10/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Caulking compounds
Glaziers' putty; grafting putty; resin cement, caulking compounds and other mastics; painters' fillings; nonrefractory surfacing preparations
Shingles, molding, wallboard
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
149610 - Caulking/glaziers compounds noi
621 - Paint
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
C - Chemical corps items and all other chemicals not covered in other classificatons. note: when an item has a chemical proper shipp
R - Flammable liquids, un class 3 (flammable liquids label)
T - 55.0
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $175.20 to $292.01.. | |
| Does NSN 8030-01-290-5138 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Department Of The Army, Department Of The Air Force, Department Of The Navy, General Services Administration, Brazil, Belgium, Canada, New Zealand, France, Republic Of Korea, United Kingdom, Netherlands, and Greece | |
| What is the NIIN of NSN 8030-01-290-5138? | |
| 012905138 or 01-290-5138 | |
| Does NSN 8030-01-290-5138 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8030-01-290-5138? | |
| Solicitation SPE8ES20T0413 for qty 26 on 10/23/2019 | |
| When was this national stock number assigned to the federal catalog? | |
| Dec 12, 1988 | |
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
effects of overexposure: eyes: irritation. Skin: local irritation. May
cause allergic skin rash if sensitive. Inhalation: irritation to
nose & throat. Prolonged exposure above pel may cause headache,
fatigue, confusion, dizz y, drowsi, numbness, & unconsious.
pro-longed can cause liver/kidney damage. Ingest: nausea vomit
liver/kidney damage
First aid: eyes: flush with luke warm water 15 min. Symptoms persist,
consult physician. skin: wash soap & water. If symptoms persist,
consult a physician. Inhalation: remove to fresh air. If symptoms
are pres ent consult a physician. And ingestion: do not induce
vomiting. Consult a physician.
Vapor density: 2.5 (mek)
spec gravity: .80
evaporation rate & reference: 33.2 (mek)
solubility in water: appreciable
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: oxides of carbon and nitrogen
Waste disposal methods: epa waste no. D-001. Dispose of spillage in
comp- liance with federal and state regulations
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 80%
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 5%
osha pel: ne
acgih tlv: ne
ingred name: amino silane
cas: 1760-24-3
rtecs #: kv7450000
fraction by wt:
osha pel: ne
acgih tlv: ne
ingred name: phenyltriethoxy silane
cas: 780-69-8
rtecs #: vv4900000
fraction by wt:
osha pel: ne
acgih tlv: ne
ingred name: isopropyl alcohol (sara iii)
cas: 67-63-0
rtecs #: nt8050000
fraction by wt: 10%
osha pel: 400 ppm/500 stel
acgih tlv: 400 ppm/500stel;9192
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
effects of overexposure: eyes: irritation. Skin: local irritation.
inhalation: irritation to nose & throat, prolonged exposure above
pel may cause headache, dizziness & unconsciousness ingestion:
maycause nausea, vomiting, li ver and kidney damage
First aid: eyes: flush with luke warm water for 15 min. If symptoms
persist, consult physi-cian. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If symp toms are present consulst a physician.Ingestion:
consult a physician.
Boiling pt: b.P. Text: na
vapor density: 2.5 (mek)
spec gravity: 1.42
evaporation rate & reference: 3.2 (mek)
solubility in water: negligible
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: oxides of carbon ,so2, traces of h2s
Waste disposal methods: not a hazardous waste according to epa
regulationsconsult state regualtions prior to disposal of
spillage
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl ethyl ketone (2-butanone) (mek) (sara iii)
cas: 78-93-3
rtecs #: el6475000
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300stel 9192
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
effects of overexposure: eyes: irritation. May cause eye damage. Skin:
local irritation. May cause allergic skin rash in sensitive skin.
inhalation: respiratory irritation. & ingestion: may cause nausea,
vomiting, & in large d oses, liver & kidney damage
First aid: eyes: flush with luke warm water for 15 min., consult
physician. Skin: wash withsoap & water. If symptoms persist,
consult a physician. Inahlation: remove to fresh air. If symptoms
are present consu lt a physician. & ingestion: give milkor water to
drink. Consult a physician.
Boiling pt: b.P. Text: na
spec gravity: 1.45
evaporation rate & reference: na
solubility in water: slight
Stability indicator/materials to avoid: yes
amines
hazardous decomposition products: oxides of carbon
Waste disposal methods: not a hazardous waste according to epa
regulationsconsult state regulations prior to disposal of
spillage
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy novolac resin
cas: 28064-14-4
fraction by wt: 30%
osha pel: ne
acgih tlv: ne
ingred name: epoxy resin
cas: 15336-82-0
fraction by wt: 30%
osha pel: ne
acgih tlv: ne
ingred name: trimethoxy, 1-2-propoxy-silane
cas: 2530-83-8
rtecs #: vv4025000
fraction by wt: 5%
osha pel: ne
acgih tlv: ne
Hcc: f5
spec gravity: 1.45
solubility in water: slight
appearance and odor: black pa te
percent volatiles by volume: none
Pctvol c ph c corrrate c flashpt c
stability condition to avoid: em c evaprate c solwater c appodor c p
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy novolac resin (epoxy resin)
cas: 28064-14-4
fraction by wt: 30%
other rec limits: none specified
ingred name: 5-ethyl-1,3-diglycidyl-5-methyl hydantoin (epoxy resin)
cas: 15336-82-0
rtecs #: mt1919100
fraction by wt: 30%
other rec limits: none specified
ingred name: trimethoxy, 1-2-propoxy-silane (epoxy silane)
cas: 2530-83-8
rtecs #: vv4025000
fraction by wt: 5%
other rec limits: none specified
ingred name: carbon black (fully encapsulated, not hazardous to users
under normal circumstances. If sanded/ground use resp protect)
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 5%
other rec limits: none specified
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3
ingred name: calcium carbonate (encapsulated,not hazardous to users
under normal circumstances.If sanded/ground use resp protection)
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 35%
other rec limits: none specified
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irritation. Skin: local
irritation. Inhalation: irritation to nose and throat. Prolonged
exposure above pel may cause headache, dizziness and
unconsciousness. Ingestion: may cause nausea, vomiti ng, liver and
kidney damage.
First aid: eyes: flush with lukewarm water for 15 minutes. If symptoms
persist, consult physican. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sym ptoms are present consult a physician. Ingestion:
consult a physician.
Hcc: f5
vapor density: 2.5 (mek)
spec gravity: 1.42
evaporation rate & reference: 3.2 (mek)
solubility in water: negligible
Stability indicator/materials to avoid: yes
strong oxidizing agents
hazardous decomposition products: oxides of carbon, so2, traces of h2s
Waste disposal methods: epa hazardous waste d-035. Consult federal and
state regulations prior to disposal of spillage.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 2-butanone (methyl ethyl ketone) (sara iii)
cas: 78-93-3
rtecs #: el6475000
fraction by wt:
other rec limits: none specified
osha pel: 200 ppm
acgih tlv: 200 ppm;stel 300 ppm
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: voc: 30.07 g/l (mixed)
rtecs #: 9999999vo
other rec limits: none specified
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irrit. Skin: local irrit.
allergic rash in sensitized individuals. Inhal: nose & throat
irrit. Prolonged exposure above pel may cause headache, fatigue,
confusion, dizziness, drowsiness, numbnes s, unconsciousness.
prolonged exposure can cause liver & kidney damage. Ingest: nausea,
vomiting, liver & kidney damage.
First aid: eyes: flush with lukewarm water for 15 minutes. If symptoms
persist, consult physician. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sy mptoms are present consult a physician.Ingestion: do not
induce vomiting. Consult a physician.
Hcc: f5
spec gravity: 0.80
solubility in water: appreciable
appearance and odor: clear liquid
Stability indicator/materials to avoid: yes
strong oxidizing agents.
hazardous decomposition products: oxides of carbon and nitrogen.
Waste disposal methods: epa waste no. D001 and d035. Dispose of spillage
in compliance with federal and state regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: 2-butanone (methyl ethyl ketone) (sara iii)
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 80%
other rec limits: none specified
osha pel: 200 ppm;stel 300 ppm
acgih tlv: 200 ppm;stel 300 ppm
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: epoxy resin
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 5%
other rec limits: none specified
ingred name: trimethoxy diamino-silane (amino silane)
cas: 1760-24-3
rtecs #: kv7400000
fraction by wt:
other rec limits: none specified
ingred name: phenyltriethoxy silane (phenyl silane)
cas: 780-69-8
rtecs #: vv4900000
fraction by wt:
other rec limits: none specified
ingred name: isopropyl alcohol (isopropanol) (sara iii)
cas: 67-63-0
rtecs #: nt8050000
fraction by wt: 10%
other rec limits: none specified
osha pel: 400 ppm;stel 500 ppm
acgih tlv: 400 ppm;stel 500 ppm
ingred name: voc: 778 g/l (tested per epa method 24)
rtecs #: 9999999vo
other rec limits: none specified
Hcc: n1
spec gravity: 1.451
appearance and odor: black paste
percent volatiles by volume: 0
Stability indicator/materials to avoid: yes
strong amines.
stability condition to avoid: not knonw.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy novolac resin (epoxy resin)
cas: 28064-14-4
fraction by wt: 20%
other rec limits: none specified
ingred name: 5-ethyl-1,3-diglycidyl-5-methyl hydantoin (epoxy resin)
cas: 15336-82-0
rtecs #: mt1919100
fraction by wt: 35%
other rec limits: none specified
ingred name: trimethoxy, 1-2-propoxy-silane (epoxy silane)
cas: 2530-83-8
rtecs #: vv4025000
fraction by wt: 5%
other rec limits: none specified
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 5%
other rec limits: none specified
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3
ingred name: calcium carbonate
cas: 1317-65-3
rtecs #: ev9580000
fraction by wt: 35%
other rec limits: none specified
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
Hcc: v4
spec gravity: 1.453
appearance and odor: white paste
percent volatiles by volume: 6.6
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: not knonwn.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits: none recommended
ingred name: calcium carbonate
cas: 1317-65-3
fraction by wt: 20%
other rec limits: none recommended
ingred name: methyl ethyl ketone
cas: 78-93-3
rtecs #: el6475000
fraction by wt:
other rec limits: none recommended
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: polythioether polimer,
cas: 119147-78-3
other rec limits: none recommended
ingred name: aluminum hydroxide
cas: 21645-51-2
rtecs #: bd0940000
other rec limits: none recommended
ingred name: silicon dioxide (amorphous)
cas: 67762-90-7
other rec limits: none recommended
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3
Hcc: f2
boiling pt: >79.C, 174.2f
vapor pres: 70 mmhg
vapor density: >air
spec gravity: 0.82
solubility in water: appreciable
appearance and odor: light amber liquid.
Stability indicator/materials to avoid: yes
strong oxidizing agents.
stability condition to avoid: not knonwn.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl ethyl ketone
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 70%
other rec limits: none recommended
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: phenol formaldehyde resin
cas: 9003-35-4
fraction by wt:
other rec limits: none recommended
ingred name: beta-(3,4-epoxycyclohexyl) ethyltrimethoxysilane
cas: 3388-04-3
rtecs #: vv4000000
fraction by wt: 10%
other rec limits: none recommended
ingred name: 2,4,6-tris(dimethylamino methyl) phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: 5%
other rec limits: none recommended
ingred name: isopropyl alcohol
cas: 67-63-0
rtecs #: nt8050000
fraction by wt: 10%
other rec limits: none recommended
ingred name: amino functional silane
cas: 68037-89-8
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: irritation. Skin: local
irritation. Inhalation: irritation to nose & throat. Headache,
fatigue, confusion, dizziness, drowsiness, numbness, unconscious.
prolonged exposure can cause liver & kidn ey damage. Ingest: may
cause nausea, vomit, liver & kidney damage.
First aid: eyes: flush with lukewarm water for 15 minutes. If symptoms
persist, consult physician. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sy mptoms are present consult a physician.Ingestion: do not
induce vomit. Consult a physician.
Boiling pt: b.P. Text: >174f,>79c
vapor pres: 70
vapor density: >air
spec gravity: 0.82
voc pounds/gallon: 712
ph: na
solubility in water: slight
appearance and odor: light amber liquid.
corrosion rate: na
Stability indicator/materials to avoid: yes
strong oxidizing agents.
hazardous decomposition products: oxides of carbon and nitrogen.
Waste disposal methods: epa waste no. D-001 and d-035. Dispose of
spillage in compliance with federal and state regulations.
Ingred name: methyl ethyl ketone
cas: 78-93-3
rtecs #: el6475000
fraction by wt: 70.0%
other rec limits: none recommended
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300 stel
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: phenolic resin
cas: 9003-35-4
fraction by wt:
other rec limits: none recommended
ingred name: organo silane ester
cas: 3388-04-3
rtecs #: vv4000000
fraction by wt: 10.0%
other rec limits: none recommended
ingred name: 2,4,6-tris(dimethylamino methyl) phenol
cas: 90-72-2
rtecs #: sn3500000
fraction by wt: 5.0%
other rec limits: none recommended
ingred name: isopropyl alcohol
cas: 67-63-0
rtecs #: nt8050000
fraction by wt: 10.0%
other rec limits: none recommended
osha pel: 400 ppm/500 stel
acgih tlv: 400 ppm/500 stel
ingred name: amino functional silane
cas: 68037-89-8
fraction by wt:
other rec limits: none recommended
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes-burn, tear, red, possible
transient corneal clouding. Skin: red, burn, drying, cracking.
inhal-cough, chest pains, throat irrit, headache, dizziness, may be
anesthetic, other central nervous syst em effects. Reversible liver
damage.
First aid: eyes: flush with lukewarm water for 15 minutes. If symptoms
persist, consult physician. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sy mptoms are present consult a physician.Ingestion:
consult physician.
Boiling pt: b.P. Text: none
vapor density: >air
spec gravity: 1.453
ph: na
evaporation rate & reference: unavailable
solubility in water: slight
appearance and odor: white paste.
percent volatiles by volume: 6.6
corrosion rate: na
Stability indicator/materials to avoid: yes
strong oxidizing agents.
hazardous decomposition products: oxides of carbon, sulfur dioxide,
traces of hydrogen sulfide.
Waste disposal methods: epa waste no. D-035 hazardous waste. Dispose of
in compliance with federal and state regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: titanium dioxide
cas: 13463-67-7
rtecs #: xr2275000
fraction by wt:
other rec limits: none recommended
osha pel: 10 mg/m3
acgih tlv: 10 mg/m3
ingred name: calcium carbonate
cas: 13151-65-3
fraction by wt: 20.0%
other rec limits: none recommended
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: methyl ethyl ketone (sara 313) (vp = 70)
cas: 78-93-3
rtecs #: el6475000
fraction by wt:
other rec limits: none recommended
osha pel: 200 ppm/300 stel
acgih tlv: 200 ppm/300 stel
epa rpt qty: 5000 lbs
dot rpt qty: 5000 lbs
ingred name: mercaptan term.Polythioether (non hazardous)
cas: 119147-78-3
other rec limits: none recommended
ingred name: aluminum hydroxide (non hazardous)
cas: 21645-51-2
rtecs #: bd0940000
other rec limits: none recommended
ingred name: silicon dioxide (amorphous) (non hazardous)
cas: 67762-90-7
other rec limits: none recommended
ingred name: voc = 48 g/l (combined parts a and b)
rtecs #: 9999999vo
other rec limits: none recommended
osha pel: not est.
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: eyes: slight transient eye irrit,
corrosion, burning, tearing, reddening. Skin: irrit, alergic
response, corrosion, burning, systemic poisoning. Ingest: toxic,
abdoninal pain, nausea, vomiting. Inhal: irrit.
First aid: eyes: flush with lukewarm water for 15 minutes. If symptoms
persist, consult physician. Skin: wash with soap and water. If
symptoms persist, consult a physician. Inhalation: remove to fresh
air. If sy mptoms are present consult a physician.Ingestion: drink
large amounts of water. Do not induce vomit. Consult a physician.
Boiling pt: b.P. Text: none
vapor density: nonvolatil
spec gravity: 1.451
ph: na
evaporation rate & reference: non volatile
solubility in water: slight
appearance and odor: black paste
percent volatiles by volume: 0.0
corrosion rate: na
Stability indicator/materials to avoid: yes
strong amines.
hazardous decomposition products: oxides of carbon/silicon
Waste disposal methods: not a hazardous waste according to epa
regulations. Consult state regulations prior to disposal of
spillage.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy novolac resin
cas: 28064-14-4
fraction by wt: 20.0%
other rec limits: none recommended
ingred name: hydantoin epoxy resin
cas: 15336-82-0
fraction by wt: 35.0%
other rec limits: none recommended
ingred name: carbon black
cas: 1333-86-4
rtecs #: ff5800000
fraction by wt: 5.0%
other rec limits: none recommended
osha pel: 3.5 mg/m3
acgih tlv: 3.5 mg/m3
ingred name: calcium carbonate
cas: 13151-65-3
fraction by wt: 35.0%
other rec limits: none recommended
osha pel: 15 mg/m3
acgih tlv: 10 mg/m3
ingred name: organo silane ester (vp = 1)
cas: 2530-83-8
rtecs #: vv4025000
fraction by wt: 5.0%
other rec limits: none recommended