Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
Solicitation | Return by Date | Buyer Code | Quantity |
---|---|---|---|
SPE8ES20T0509 | 2019-11-04 | PEPCE | 877 KT |
SPE8ES19T6466 | 2019-07-08 | PEPCE | 406 KT |
SPE8ES19T5113 | 2019-05-13 | PEPCE | 680 KT |
SPE8ES18T8475 | 2018-08-06 | PEPCE | 1400 KT |
SPE8ES18T7344 | 2018-07-02 | PEPCE | 773 KT |
SPE8ES18T7269 | 2018-06-26 | PEPCE | 765 KT |
SPE8ES18T5071 | 2018-04-23 | PEPCE | 3132 KT |
SPE8ES17T4491 | 2017-06-12 | PAA94 | 1141 KT |
SPE8ES18T0482 | 2017-10-25 | PEPCE | 1003 KT |
SPE8ES17T6489 | 2017-09-06 | PEPCE | 1502 KT |
The last inventory check on this NSN was done on 01/23/2023. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes noi
660 - Cement, construction
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $40.18 to $66.96.. | |
Does NSN 8040-01-126-6270 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, Department Of The Navy, General Services Administration, Brazil, Singapore, New Zealand, Germany, Republic Of Korea, United Kingdom, Greece, and Turkey | |
What is the NIIN of NSN 8040-01-126-6270? | |
011266270 or 01-126-6270 | |
Does NSN 8040-01-126-6270 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 8040-01-126-6270? | |
Solicitation SPE8ES20T0509 for qty 877 on 10/28/2019 | |
When was this national stock number assigned to the federal catalog? | |
Feb 15, 1982 |
Routes of entry: inhalation: no skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin/eye: may cause irritation &
allergic reactions. Skin: prolonged/repeated contact may cause
sensitization which will result in allergic reactions, &
dermatitis.
explanation of carcinogenicity: none
effects of overexposure: skin/eye: may causes irritation. Skin:
prolonged & repeated contact may cause sensitization which will
result in allergic reactions & dermatitis.
medical cond aggravated by exposure: allergic skin reactions, rash.
First aid: skin/eye: flush w/plenty of water for at least 15 minutes.
skin: wash with soap & water. Seek medical attention if irritation
persists, see a physician. Remove contaminated clothing &
thoroughly clean before reuse.
Hcc: c2
boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: >1
evaporation rate & reference: nil
solubility in water: nil
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis, mineral acids.
stability condition to avoid: avoid mixing resin/curing agent in batches
>1 pd total.
hazardous decomposition products: co, nox, aldehydes, acids &
undetermined organics.
conditions to avoid polymerization: don't heat mixed adhesvie >75f
unless curing surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to dot
hazard class. If not regulated by dot, dispose of as orm-e.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin
cas: 6508-38-6
ingred name: silica, amorphous, dust
cas: 112945-52-5
rtecs #: vv7310000
other rec limits: 3 mg/cum resp. Dust
osha pel: 6 mg/m3
acgih tlv: 10 mg/m3; 8990
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: skin/eyes: corrosive, burns,
irritation. Ingestion: mucous membranes damage. Inhalation: upper
respiratory tract irritation.
explanation of carcinogenicity: none
effects of overexposure: skin/eyes: corrosive, burns, irritation,
sensitization/allergic reactions. Inhalation: respiratory tract
irritation. Ingestion: severe mucous membranes irritation.
medical cond aggravated by exposure: sensitization, allergic skin
reactions.
First aid: skin/eye: flush w/plenty of water. Wash thoroughly w/soap &
water or hand cleaner. Don't use solvents. Remove/ wash clothes
before reuse. If irritation persists, see physician.
Hcc: c2
vapor density: 8.45
spec gravity: 1.02
evaporation rate & reference: nil
appearance and odor: transparent red liquid w/ammoniacal odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis/mineral acids.
stability condition to avoid: mixing resin/curing agent in batches >1 lb
total. Don't heat mixed adhesive unless curing surfaces to be
bonded.
hazardous decomposition products: co, nox, aldehydes, acids &
undetermined organics.
conditions to avoid polymerization: failure to observe caution may
result in excessive heat build-up w/the release of toxic gases.
Waste disposal methods: dispose of as hazardous waste according to dot
hazard class. If not regulated by dot, dispose of as orm-e.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: alkylamines
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: may cause eye and skin irritation and
possible allergic reactions. Prolonged and repeated contact may
cause sensitization which will result in allergic reactions. Avoid
contact with eyes or skin.
effects of overexposure: skin rash, irritation.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Hcc: b2
boiling pt: b.P. Text: decomposes
vapor pres:
vapor density: nil
spec gravity: >1
evaporation rate & reference: nil
solubility in water: nil
appearance and odor: pearlescent paste with pungent odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing resin/curing agent in batches
greater than 1 lb. Do not heat mixed adhesive unless curing
surfaces to be bonded.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: epoxy resin system
ingred name: silica
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
osha pel: 20 mppcf
acgih tlv: 0.1 mg/m3
ingred name: voc
rtecs #: 9999999vo
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: material may be corrosive or cause
severe burns to skin and eyes. High concentration of vapors can
cause severe irritation of eyes and respiratory tract. Liquid
causes severe damage to mucous membrane s if swallowed. Prolonged
and repeated contact may cause sensitization which will result in
allergic reactions.
effects of overexposure: possible burns to eyes and skin; irritation and
possible sensitization to skin. Vapors may be irritating to upper
respiratory tract. Do not get on skin or clothing.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water or hand cleaner. Do not use
solvents. Remove soiled clothing and wash before reuse. If
irritation persists, see phy sician.
Hcc: b2
vapor density: 8.45
spec gravity: 1.02
appearance and odor: reddish-orange liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: alkylamines
ingred name: voc
rtecs #: 9999999vo
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute: brief contact may irritate the
skin or cause a rash.
chronic: repeated o r prolonged skin contact may result in
allergic sensitization.
effects of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
First aid: eye: flush eyes with water for 15 minutes. If irritation
persists, get medical attention. Skin: wash skin thoroughly with
soap and water. If irritation persists, get medical attention.
inhalation: rem ove victim to fresh air. If symptoms persist, get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediately.
Hcc: b3
vapor pres: nil
vapor density: nil
spec gravity: 1.22 (water=1)
viscosity: 1500-6000 p
solubility in water: negligible
appearance and odor: pearlescent paste with pungent odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin (pt a) & curing agent
(pt b) in batches >1 lb unless used immed. Dont heat mix >75f
unless curing *
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: * surfaces to be bonded. Failure to
observe precautions--excessive heat bldup (exotherm). Exother may
release toxic gas.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: bisphenol a/epichlorohydrin epoxy resin (oral, rat ld50:
11,400 mg/kg) (component exhibited mutagenicity in bacteria)
cas: 25068-38-6
rtecs #: kc2100000
fraction by wt: 60-100%
other rec limits: none specified
ingred name: butadiene-acrylonitrile copolymer
fraction by wt: 5-10%
other rec limits: none specified
ingred name: silica
cas: 112945-52-5
rtecs #: vv7318000
fraction by wt: 1-5%
other rec limits: none specified
osha pel: 6 mg/m3
acgih tlv: 6 mg/m3
ingred name: voc:
rtecs #: 9999999vo
other rec limits: none specified
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute; this material is corrosive to
eyes and skin. Brief contact may cause chemical burns. Vapors and
mists will irritate nose and throat.
chronic; repeated/prolonged skin contact may result in burns &
allergic sensitization.
effects of overexposure: skin or eye irritation, chest discomfort.
medical cond aggravated by exposure: skin sensitization
First aid: eye: flush eyes with lots of running water for 15 minutes.
get medical attention immediately. Skin: wash skin thoroughly with
soap and water. If irritation persists, get medical attention.
inhalation: remove victim to fresh air. If symptoms persist, get
medical attention. Ingestion: drink plenty of water. Get medical
attention immediately.
Hcc: v5
vapor pres:
spec gravity: 1.02 (water=1)
viscosity: 0.02-0.05 p
solubility in water: 100%
appearance and odor: reddish-orange liquid with ammoniacal odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: avoid mixing resin (pt a) & curing agent
(pt b) in batches > 1 lb unless you use immediately. Dont heat mix
>125 f *
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics
conditions to avoid polymerization: * unless curing surfaces to be
bonded. Failure to observe precautions may cause heat bldup
(exotherm-toxic gases).
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: diethylene glycol diamino propyl ether
cas: 4246-51-9
rtecs #: id6475000
fraction by wt: 60-100%
other rec limits: none specified
ingred name: voc:
rtecs #: 9999999vo
other rec limits: none specified
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
explanation of carcinogenicity: per msds neither this material nor any of its
components is considered a carcinogen.
signs and symptions of overexposure: skin & eye irritation. Chest
discomfort.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/lots of running water for 15 mins. Get med attn immed.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. Ingest:
drink plenty of water. Get med attn immed.
hcc: v5
vapor pres: <0.4
vapor density: not avail.
spec gravity: 1.02
ph: notest
solubility in water: apreciable
appearance and odor: reddish-orange liquid, ammoniacal odor
corrosion rate: na
product id: ea 9309na part b (ab9234000)
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
skin & eye irritation. Chest discomfort.
=======================================================
responsible party cage: 33564
trans id no: 109367
product id: ea 9309na part b (ab9234000)
msds prepared date: 10/01/1993
review date: 07/17/1996
mfn: 7
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing a&b in batches >1lb unless used
immediately. Don't heat mixed adhesive unless curing surfaces to be bonded.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
spill release procedures: wear protective clothing, gloves & safety
glasses. Absorb spill with absorbent material such as vermiculite or sand.
scrape up or shovel into dot approved waste containers.
waste disposal methods: matl not rcra haz waste. However, incineration in epa
approved waste incinerator preferred. Chem additions/processing/otherwise
altering matl may make waste mgmt info herein incomplete/inaccurate/inap
propriate.Consult state/local regs.
handling and storage precautions: prod may be stored @ rm temp for up to 12
mos. Keep cntnrs tightly closed when not in use. Empty cntnrs retain residue;
handle as if full.
other precautions: follow curing schedule/ratio as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
unless curing surfaces to be bonded.
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: brief contact may irrit skin or cause a rash. Repeated or
prolonged skin contact may result in allergic sensitization. Carcinogenicity
note: bisphenol a/epichlorohydrin epoxy resin has exhibited mutag enicity in
bacteria.
explanation of carcinogenicity: neither this material nor any of its components
is considered a carcinogen.
signs and symptions of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/water for 15mins. If irrit persists get med attn.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. I
ngest: drink plenty of water. Get med attn immed.
hcc: b3
b.P. Text: undefined
decomp text: untested
vapor pres: nil
vapor density: >1
spec gravity: 1.22
viscosity: 1500-6000 brk
solubility in water: negligible.
appearance and odor: pearlescent paste, pungent odor
corrosion rate: na
product id: hysol ea 9309na part a (aa9234)
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 800-424-9300(chemtrec)
label required ind: y
date of label review: 12/16/1998
status code: c
label date: 12/16/1998
origination code: g
hazard and precautions: brief contact may irrit skin or cause a rash. Repeated
or prolonged skin contact may result in allergic sensitization.
carcinogenicity note: bisphenol a/epichlorohydrin epoxy resin has exhibited
mutag enicity in bacteria.
skin rash, irritation.
=======================================================
responsible party cage: 33564
trans id no: 109368
product id: hysol ea 9309na part a (aa9234)
msds prepared date: 03/01/1992
review date: 02/20/1996
mfn: 8
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a & b in batches >0.5 lb &
heating mixture.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
conditions to avoid polymerization: .
spill release procedures: wear protective clothing, gloves & safety
glasses. Scrape up or shovel into dot approved waste containers.
waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/ processing/otherwise
altering matl may make waste management infor herein incomplete/inaccurate/
inappropriate.Consult state/loc regulations.
handling and storage precautions: refrigerated storage is recommended to
maintain product quality. This product may be stored @ room temp (77f) for up
to 12 months.
other precautions: follow curing schedule as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
>75f unless curing surfaces to be bonded.
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: brief contact may irrit skin or cause a rash. Repeated or
prolonged skin contact may result in allergic sensitization. Carcinogenicity
note: bisphenol a/epichlorohydrin epoxy resin has exhibited mutag enicity in
bacteria.
explanation of carcinogenicity: neither this material nor any of it's
components is considered a carcinogen.
signs and symptions of overexposure: skin rash, irritation.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/water for 15mins. If irrit persists get med attn.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. I
ngest: drink plenty of water. Get med attn immed.
hcc: t4
b.P. Text: undefined
decomp text: untested
vapor pres: nil
vapor density: nil
spec gravity: 1.22
solubility in water: negligible.
appearance and odor: pearlescent paste w/pungent odor
corrosion rate: na
product id: hysol ea 9309na, as9234018
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 510-458-8000
label required ind: y
date of label review: 10/12/1999
status code: a
origination code: g
hazard and precautions: brief contact may irrit skin or cause a rash. Repeated
or prolonged skin contact may result in allergic sensitization.
carcinogenicity note: bisphenol a/epichlorohydrin epoxy resin has exhibited
mutag enicity in bacteria.
=======================================================
responsible party cage: 33564
trans id no: 109369
product id: hysol ea 9309na, as9234018
msds prepared date: 03/01/1992
review date: 06/09/1997
mfn: 9
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: avoid mixing parts a&b in batches >0.5 lb &
heating mixture >75f.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: no
conditions to avoid polymerization: polymerization not likely
spill release procedures: wear protective clothing, gloves & safety
glasses. Scrape up or shovel into dot approved waste containers.
waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/ processing/otherwise
altering matl may make waste management infor herein incomplete/inaccurate/
inappropriate.Consult state/loc regulations.
handling and storage precautions: refrigerated storage is recommended to
maintain product quality. This product may be stored @ room temp (77f) for up
to 12 months.
other precautions: follow curing schedule as recommended in product
literature.Don't cut/grind/weld/drill on/near container.Avoid mixing parts
a&b in batches >1lb unless plan to use immed.Don't heat mixed adhesive
>75f unless curing surfaces to be bonded.
ld50 lc50 mixture: mixture has not been tested as a whole.
route of entry inds - inhalation: yes
skin: yes
ingestion: no
carcinogenicity inds - ntp: no
iarc: no
osha: no
effects of exposure: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
explanation of carcinogenicity: per msds neither this material nor any of its
components is considered a carcinogen.
signs and symptions of overexposure: skin & eye irritation. Chest
discomfort.
medical cond aggravated by exposure: skin sensitization.
first aid: eye: flush w/lots of running water for 15 mins. Get med attn immed.
skin: wash thoroughly w/soap & water. If irrit persists get med attn.
inhal: remove victim to fresh air. If symptoms persist get med attn. Ingest:
drink plenty of water. Get med attn immed.
hcc: b2
b.P. Text: 644f,340c
vapor pres: <0.4
spec gravity: 1.02
ph: notest
voc grams/liter: 10
solubility in water: 100%
appearance and odor: reddish-orange liquid, amine odor
corrosion rate: na
product id: hysol ea 9309na, as9234015
cage: 33564
company name: dexter corporation adhesive & coating systems
street: 2850 willow pass road
po box: 312
city: bay point ca
zipcode: 94565-3299
health emergency phone: 510-458-8000
label required ind: y
date of label review: 10/12/1999
status code: a
origination code: g
hazard and precautions: material is corrosive to eyes & skin. Brief contact
may cause chemical burns. Vapors & mists will irritate nose & throat.
repeated or prolonged skin contact may result in burns and possible allergic
s ensitization.
=======================================================
responsible party cage: 33564
trans id no: 109370
product id: hysol ea 9309na, as9234015
msds prepared date: 11/01/1995
review date: 08/12/1997
mfn: 10
multiple kit number: 0
kit part ind: y
review ind: y
unit of issue: kt
container qty: 0
=======================================================
stability indicator: yes
stability condition to avoid: don't mix batches a&b >1lb unless used
immediately. Don't heat mixed adhesive >125f unless curing surfaces to be
bonded.
materials to avoid: strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids & undetermined
organics.
hazardous polymerization indicator: yes
spill release procedures: wear protective clothing, gloves & safety
glasses. Absorb spill with absorbent material such as vermiculite or sand.
scrape up or shovel into dot approved waste containers.
waste disposal methods: matl not rcra haz waste. However, incineration in epa
approved waste incinerator preferred. Chem additions/processing/otherwise
altering matl may make waste mgmt info herein incomplete/inaccurate/inap
propriate.Consult state/local regs.
handling and storage precautions: this product may be stored at room
temperature for up to 12 months. Keep container tightly closed when not in
use.
other precautions: follow curing schedule/mixing ratios recommended in product