NationalStockNumber.INFO
Worldwide distributor of NSN parts and consumables located in the USA.
Worldwide distributor of NSN parts and consumables located in the USA.
A substance compounded for binding materials together by surface attachment. It is not used primarily to fill voids or pores or for sealing purposes. Excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.
The last inventory check on this NSN was done on 05/21/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
004620 - Adhesives: cements, glues, pastes sub5
705 - Cement, liquid
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
R - Flammable liquids, un class 3 (flammable liquids label)
S - 60.0
Questions & Answers: |
|
| What are the historical prices recorded for this stock number? | |
| Historical data shows pricing from $908.90 to $1,514.84.. | |
| Does NSN 8040-01-175-9193 have a shelf life? | |
| No. There is no shelf life applicable for this NSN. | |
| What NATO entities are users of this NSN? | |
| Poland, Singapore, Belgium, Republic Of Korea, Netherlands, Portugal, Italy, Norway, and Greece | |
| What is the NIIN of NSN 8040-01-175-9193? | |
| 011759193 or 01-175-9193 | |
| Does NSN 8040-01-175-9193 require demilitarization? | |
| Yes - ITAR Controlled | |
| What is the most recent solicitation for NSN 8040-01-175-9193? | |
| No solicitations for this NSN. | |
| When was this national stock number assigned to the federal catalog? | |
| Apr 06, 1984 | |
Routes of entry: inhalation: no skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs would be skin & lungs.
eyes/skin: corrosive/burn. Ingestion: shortness of breath, narcotic
affect.
explanation of carcinogenicity: methylene methacrylate is a suspected
carcinogen.
effects of overexposure: skin/eyes: corrosive/burn. Ingestion: shortness
of breath, narcotic effect.
First aid: skin/eye: flush with plenty of water. Skin: wash thoroughly
w/soap & water, rubbing alcohol or hand cleaner. Don't use
solvents. Remove soiled clothing & wash before reuse. If irritation
persists, see physician. Inhalation: remove victim to fresh air.
if not breathing, use artificial respiration. If breathing, give
oxygen. Seek medical help.
Boiling pt: b.P. Text: 100f
vapor pres: 29
vapor density: 3/k
evaporation rate & reference: (butyl acetate = 1): >1
solubility in water: nil
appearance and odor: ivory colored paste with pungent odor.
Stability indicator/materials to avoid: yes
acids, bases, metallic salts, exposure to unprotected metals where
salts may be formed.
stability condition to avoid: keep away from heat, sparks, open flame,
contamination, oxygen free atmosphere. Uv light
hazardous decomposition products: co, nox, aldehydes, acids,
undetermined organics, smoke & toxic gases.
conditions to avoid polymerization: local overheating which might
initiate uncontrolled polymerization.
Waste disposal methods: dispose of as hazardous waste according to dot
hazard class. If not regulated by dot, dispose of as orm-e.
flammable liquid.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl methacrylate (sara iii)
cas: 80-62-6
rtecs #: oz5075000
fraction by wt:
other rec limits: 100 ppm
osha pel: 100 ppm
acgih tlv: 100 ppm; 9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: methacrylic acid
cas: 79-41-4
rtecs #: oz2975000
fraction by wt:
other rec limits: 20 ppm
osha pel: s, 20 ppm
acgih tlv: 20 ppm; 9192
ingred name: 1-methyl-1-phenylethyl hydroperoxide (cumene hydroperoxide)
(sara iii)
cas: 80-15-9
rtecs #: mx2450000
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: silica amorphous hydrated, siliceous earth, fumed silica
cas: 112945-52-5
rtecs #: vv7310000
fraction by wt:
other rec limits: 20 mppcf
osha pel: 80 mg/cum (%sio2+2)
Routes of entry: inhalation: yes skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: ingestion: material is toxic.
inhalation: irritation to upper respiratory tract.
explanation of carcinogenicity: none
effects of overexposure: ingestion: material is toxic. Inhalation:
irritation to upper respiratory tract.
First aid: eye/skin: flush w/plenty of water for at least 15 minutes.
wash thoroughly w/soap & water, rubbing alcohol or hand cleaner.
don't use solvents. Inhalation: remove to fresh air. Remove soiled
clothing & wash before reuse. If irritation persists, see
physician.
Spec gravity: 0.97
evaporation rate & reference: nil
solubility in water: insoluble
appearance and odor: red-brown liquid, characteristic odor.
Stability indicator/materials to avoid: yes
strong oxidizing agents, lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids &
undetermined organics.
conditions to avoid polymerization: don't heat mixed adhesive unless
curing surfaces to be bonded. Don't mix resin/curing agent in large
batches.
Waste disposal methods: dispose of as hazardous waste according to dot
hazard class. If not regulated by dot, dispose of as orm-e.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aniline oligomer
Routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: yes iarc: yes osha: yes
health hazards acute and chronic: inhalation studies indicate that the
material will be very irritating to the upper respiratory tract.
methacrylic acid is corrosive to eyes and skin. May cause eye, skin
and lung irritation.
explanation of carcinogenicity: carbon tetrachloride is a suspected
carcinogen.
effects of overexposure: shortness of breath, narcotic affect. Burning
of eyes and skin.
First aid: flush skin and eye contact with plenty of water. Wash skin
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. If inhaled, remove victim to fresh air. If not
breathin g, use artificial respiration. If breathing, give oxygen.
seek medical help. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Boiling pt: b.P. Text: 100f,38c
vapor pres: 29 mm
vapor density: about 3
evaporation rate & reference: >1
solubility in water: nil
appearance and odor: ivory colored paste with pungent odor
Stability indicator/materials to avoid: yes
acids or bases, metallic salts, exposure to unprotected metals where
salts may be formed.
stability condition to avoid: heat, sunlight, or uv light, contamination
or oxygen free atmosphere
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: mixing pt a & b in batches greater
than 100 gm.Use caution or may result in excessive heat build-up
w/toxic gas release.
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: methyl methacrylate (sara iii)
cas: 80-62-6
rtecs #: oz5075000
fraction by wt: 53.5%
osha pel: 100 ppm
acgih tlv: 100 ppm; 9192
epa rpt qty: 1000 lbs
dot rpt qty: 1000 lbs
ingred name: methacrylic acid
cas: 79-41-4
rtecs #: oz2975000
fraction by wt:
osha pel: s, 20 ppm
acgih tlv: 20 ppm; 9192
ingred name: 1-methyl-1-phenylethyl hydroperoxide (cumene hydroperoxide)
(sara iii)
cas: 80-15-9
rtecs #: mx2450000
fraction by wt: 1.0%
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ingred name: carbon tetrachloride (sara iii)
cas: 56-23-5
rtecs #: fg4900000
fraction by wt: .14% max
osha pel: 10 ppm
acgih tlv: s,5ppm/10 stel,a3 93
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
ozone depleting chemical: 1
Routes of entry: inhalation: yes skin: yes ingestion: yes
health hazards acute and chronic: material is toxic by ingestion.
explanation of carcinogenicity: n/k *be bonded. Failure to observe
caution may result in excessive heat build-up with the release of
toxic gases.
effects of overexposure: irritation to upper respiratory tract.
First aid: flush skin and eye contact with plenty of water. Wash
thoroughly with soap and water, rubbing alcohol or hand cleaner. Do
not use solvents. If inhaled, remove to fresh air. If ingested,
seek medical a id. Remove soiled clothing and wash before reuse. If
irritation persists, see physician.
Spec gravity: 0.97
evaporation rate & reference: nil
solubility in water: insoluble
appearance and odor: red-brown liquid, characteristic odor
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
hazardous decomposition products: co, nox, aldehydes, acids and
undetermined organics.
conditions to avoid polymerization: avoid mixing resin and curing agent
in batches greater than 1 lb. Do not heat mixed adhesive unless
curing surfaces to *
Waste disposal methods: dispose of as hazardous waste according to
federal, state and local regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aniline oligomer
Ld50 lc50 mixture: mixture has not been tested as a whole.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: this material may be corrosive to eyes
& skin. Brief contact may cause chemical burns. Vapors & mists will
irritate nose & throat. Repeated or prolonged skin contact may
result in burns, possible alle rgic sensitization.
explanation of carcinogenicity: iarc: methyl methacrylate,80-62-6, grp
3, not human carcinogen.Carbon tetrachloride, 56-23-5, grp 2b
possible human carc
effects of overexposure: skin or eye irritation. Chest discomfort.
medical cond aggravated by exposure: skin sensitization.
First aid: eye: flush w/water for 15 mins. If irrit persists get med
attn. Skin: wash thoroughly w/soap & water. If irrit persists get
med attn. Inhal: remove victim to fresh air. If symptoms persist
get med attn . Ingest: drink plenty of water. Get med attn immed.
Boiling pt: b.P. Text: 100f,38c
vapor pres:
vapor density: 8.6
spec gravity: 1.01
viscosity: *
solubility in water: negligible
appearance and odor: ivory colored paste, pungent odor
corrosion rate: na
Stability indicator/materials to avoid: yes
heat, sunlight, uv light, contamination, oxygen free atmosphere.
*has potential for release of toxic gas.
stability condition to avoid: don't mix batches >100g unless use
immed.Failure observe precautions may = excess heat build-up, cause
exotherm, which*
hazardous decomposition products: co, nox, aldehydes, acids &
undetermined organics.
Waste disposal methods: as waste, material considered rcra waste
(d001/d002)
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: no ingredient for this formulation_ingredient
Ld50 lc50 mixture: mixture has not been tested as a whole.
routes of entry: inhalation: yes skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: immediate effects: none noted although
slightly toxic by ingestion. Long-term: none noted.
explanation of carcinogenicity: this component is not considered a
carcinogen.
effects of overexposure: no significant effects have been noted
w/long-term use.
medical cond aggravated by exposure: none noted
First aid: eye: flush w/water for 15mins. If irrit persists get med attn.
skin: wash thoroughly w/soap & water. If irrit persists get med
attn. Inhal: remove victim to fresh air. If symptoms persist get med
attn. I ngest: drink plenty of water. Get med attn immed.
Boiling pt: b.P. Text: not tested
decomp temp: decomp text: untested
vapor pres: not tested
vapor density: not tested
spec gravity: 0.97
viscosity: *
solubility in water: insoluble
appearance and odor: red-brown liquid, characteristic odor
corrosion rate: na
Stability indicator/materials to avoid: yes
strong oxidizing agents, strong lewis or mineral acids.
stability condition to avoid: do not contaminate w/strong oxidizing
agents.
hazardous decomposition products: oxides of carbin & nitrogen under
burning conditions.
conditions to avoid polymerization: polymerization not likely
Waste disposal methods: not rcra haz waste.However, incineration in epa
approved waste incinerator is preferred.Chem additions/
processing/otherwise altering matl may make waste management infor
herein incomplete/inaccurate/ inappropriate.Consult state/loc
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: aniline oligomer (oral rat ld50 2.4 g/kg)
cas: 9003-37-6
fraction by wt: 60-100%
other rec limits: none recommended