Worldwide distributor of NSN parts and consumables located in the USA.
A noncorrosive mineral, synthetic, or biobased oil with special oxidation resistant and rust-inhibiting additives for use in hydraulic systems, waterbury speed reducers, and plane lifts.
The last inventory check on this NSN was done on 04/17/2024. Due to rapid changes in inventory this may not be the current stock qty.
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Lubricating oils with or without additives, nesoi
Petroleum oils & oils from bituminous minerals (other than crude), and productds therefrom containing 70% (by wt) or more of these oils, nes
Petroleum products, other
Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMICA - Item does not contain precious metal.
CRITL- The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
155250 - Petro prods: petrolatum preps
603 - Petroleum, lubricating or similar oils (other than bulk)
9 - Other or no special handling required (sh)
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
F - Fuels and lubricants, including fuel and lubricating supplies and equipment and gases other than noxious gases.
W - Rating variable
Z - No special type of cargo code applicable
Questions & Answers: |
|
What are the historical prices recorded for this stock number? | |
Historical data shows pricing from $1,086.94 to $1,811.57.. | |
Does NSN 9150-00-082-5636 have a shelf life? | |
No. There is no shelf life applicable for this NSN. | |
What NATO entities are users of this NSN? | |
Department Of The Army, Department Of The Air Force, U.s. Marine Corps, Department Of The Navy, Austria, Poland, Brazil, Spain, Singapore, Australia, Belgium, New Zealand, France, Germany, Republic Of Korea, Netherlands, Portugal, Italy, Denmark, Greece, Turkey, and Nato Maintenance and Supply Agency | |
What is the NIIN of NSN 9150-00-082-5636? | |
000825636 or 00-082-5636 | |
Does NSN 9150-00-082-5636 require demilitarization? | |
Yes - ITAR Controlled | |
What is the most recent solicitation for NSN 9150-00-082-5636? | |
No solicitations for this NSN. | |
When was this national stock number assigned to the federal catalog? | |
Jan 01, 1961 |
Health hazards acute and chronic: acute: mild irritation of eyes and
skin; no other information has been given. Chronic: no data
available.
effects of overexposure: mild irritation of eyes and skin.
medical cond aggravated by exposure: no data available.
First aid: eyes and skin: flush with plenty of water for about 15
minutes;seek medical attention if needed.
Hcc: v5
boiling pt: b.P. Text: >500f/260c
vapor pres: 1.0 mmhg
spec gravity: 1.025
ph: neutrl
evaporation rate & reference: >1.0 (butyl acetate=1)
solubility in water: negligible
appearance and odor: amber odorless liquid.
percent volatiles by volume:
Stability indicator/materials to avoid: yes
not specified by the mfr.
stability condition to avoid: extreme heat.
hazardous decomposition products: co*2,sio*2,formaldehyde,chlorinated
benzenes.
Waste disposal methods: disposal must be in accordance with local,state
and federal regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: chlorophenylmethylpolysiloxane
ingred name: other components (not specified)
Reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: none specified by manufacturer.
explanation of carcinogenicity: none specified by manufacturer.
effects of overexposure: may cause transient eye irritation.
medical cond aggravated by exposure: none specified by manufacturer.
First aid: eyes: flush with plenty of water for at least 15 minutes.If
irritation persists,see doctor. Skin: wash with mild soap and water
while removing contaminated clothing and shoes.If irritation
persists,see doctor. Inhalation: remove victim to fresh air.Give
oxygen/cpr if needed.See doctor. Ingestion: induce vomiting.See
doctor immediately.
Hcc: v6
spec gravity: 1.03
viscosity: 70 cs
solubility in water: insoluble
appearance and odor: clear-slightly yellow liquid. Odorless.
Stability indicator/materials to avoid: yes
mineral acids.
stability condition to avoid: high temperatures. Very stable up to 300c
and up to 350c for short periods.
hazardous decomposition products: hydrochloric acid, carbon oxides and
silica, emitted on combustion.
Waste disposal methods: contact your local environmental officer.
dispose of in accordance with all federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: chlorophenyl methyl polysiloxane
fraction by wt: 100%
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: not expected to pose any health
hazards when used under normal working conditions.
explanation of carcinogenicity: this item contains
hexachlorobenzene.
effects of overexposure: no data available. May cause mild skin & eye
irritation.
medical cond aggravated by exposure: no data available.
First aid: inhalation-remove victim to fresh air. If breathing is
difficult administer oxygen. Consult a physician. Ingestion-get
medical attention. Eye contact-flush with water for at least 15
min. Obtain medic al attention. Skin contact-wash with soap. Flush
with water for at least 15 min.
Hcc: v6
boiling pt: b.P. Text: >500f,>260c
vapor pres: 1
vapor density: >1
spec gravity: 1.025
viscosity: na
solubility in water: insoluble
appearance and odor: viscous liquid; no odor
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: none specified by manufacturer.
hazardous decomposition products: silicon(iv) oxide,carbon monoxide,
carbon dioxide.
Waste disposal methods: incinerate in accordance with all regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hexachlorobenzene (sara iii)
cas: 118-74-1
rtecs #: da2975000
fraction by wt:
other rec limits: none recommended
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Routes of entry: inhalation: no skin: no ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: acute- may cause eye and skin
irritation. Vapors may cause respiratory tract irritation. Effects
of ingestion is unknown. Chronic- may cause skin defatting.
effects of overexposure: may cause eye and skin irritation. Vapors may
cause respiratory tract irritation.
medical cond aggravated by exposure: pre-existing skin disorders may be
more susceptible to this material.
First aid: get medical attention if symptoms persist. Skin: remove
contaminated clothing. Flush skin with water, then wash with soap &
water. Eye: flush with water for 15 minutes, holding eyelids open.
inhaled: rem ove to fresh air. Provide oxygen/cpr ifneeded. Oral: get
medical attention.
Hcc: v6
spec gravity: 1.03
solubility in water: insoluble
appearance and odor: clear-slightly yellow liquid. Odorless.
Stability indicator/materials to avoid: yes
mineral acids.
stability condition to avoid: high temperatures, flames
hazardous decomposition products: hydrochloric acid, carbon oxides and
silica, emitted on combustion.
Waste disposal methods: contact your local environmental officer.
dispose of in accordance with all federal, state and local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: chlorophenyl methyl polysiloxane
fraction by wt: 100%
other rec limits: none specified
Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: yes osha: no
health hazards acute and chronic: skin/eyes: may cause mild irritation.
explanation of carcinogenicity: see ingredients.
effects of overexposure: skin/eyes: may cause mild irritation.
First aid: inhalation: remove to fresh air. Give oxygen if needed. Eyes:
flush w/water for 15 mins. Skin: wash w/soap . Flush w/water for 15
mins. Obtain medical attention in all cases.
Hcc: v6
boiling pt: b.P. Text: 500f
vapor pres: 1
vapor density: >1
spec gravity: 1.025
solubility in water: insoluble
appearance and odor: viscous liquid odorless
Stability indicator/materials to avoid: yes
strong oxidizers
hazardous decomposition products: silicone dioxide, co, co2
Waste disposal methods: incinerate/dispose of iaw/federal, state & local
regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: siloxanes & silicones, di-me, polymers w/tetrachlorophenyl
silsesquioxanes *96-2*
cas: 68957-05-1
ingred name: hexachlorobenzene (animal carcinogen by iarc - group 2b)
*96-2*
cas: 118-74-1
rtecs #: da2975000
fraction by wt:
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Routes of entry: inhalation: no skin: no ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: not expected to pose any health
hazards when used under normal working conditions.
effects of overexposure: no data available. May cause mild skin and eye
irritation.
medical cond aggravated by exposure: no data available.
First aid: inhalation: remove victim to fresh air. If breathing is
difficult administer oxygen. Consult a phsycian. ingestion: get
medical attention. Eyes: flush wtih water for at least 15 min.
obtain medical attention. Skin: wash with soap. Flush with water
for at least 15 min.
Hcc: v6
boiling pt: >260.C, 500.F
melt/freeze pt: m.P/f.P text: na
vapor pres: 1 mm hg
vapor density: >1
spec gravity: 1.025
ph: na
evaporation rate & reference: na
solubility in water: insoluble
appearance and odor: viscous liquid, no odor
Stability indicator/materials to avoid: yes
strong oxidizers.
stability condition to avoid: na
hazardous decomposition products: sio2, co, co2.
conditions to avoid polymerization: will not occur.
Waste disposal methods: incinerate in accordance with all regulations.
disclaimer (provided with this information by the compiling agencies):
this information is formulated for use by elements of the department
of defense. the united states of america in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ingred name: hexachlorobenzene
cas: 118-74-1
rtecs #: da2975000
< wt: .01
acgih tlv: 0.025 mg/m3
epa rpt qty: 10 lbs
dot rpt qty: 10 lbs
Ld50 lc50 mixture: none specified by manufacturer.
routes of entry: inhalation: yes skin: yes ingestion: yes
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: skin, eyes respiratory
passages (over 250c). Acute effects: possible skin & eye
irritation. Possible respiratory passage irritation at high
temperatures (over 250c). Chronic effects: no ne known.
explanation of carcinogenicity: iarc, ntp and osha do not list
nyosil-m20 or its ingredients as carcinogens.
effects of overexposure: skin-irritation. Eyes-irritation.
inhalation-respiratory passage irritation.
medical cond aggravated by exposure: none known.
First aid: inhalation-move to fresh air. Refer to a physician for
treatment. Eye contact-wash thoroughly. Contact physician if
irritation persists. Skin contact-wash thoroughly with soap and
water. Ingestion-not expected to be a problem. However, if
ingested, immediately give 1-2 glasses of water and call a
physician.
Hcc: n1
boiling pt: b.P. Text: not volitile
melt/freeze pt: =-73.C, -99.4f
m.P/f.P text: pour point
vapor pres: negligible
vapor density: >air
spec gravity: 1.03
ph: neutral
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: water-white,odorless oil.
percent volatiles by volume: none
Stability indicator/materials to avoid: yes
strong oxidizing materials.
stability condition to avoid: nyosil-m20 is stable at room temperature
in closed containers under normal storage & handling conditions.
avoid: pyrolisis.
hazardous decomposition products: thermal oxidative decomposition of
nyosil-m20 can produce carbon monoxide as well as small amounts of
other toxic fumes.
conditions to avoid polymerization: hazardous polymerization cannot
occur.
Waste disposal methods: none specified by manufacturer.
Ingred name: chlorophenylmethylpolysiloxane
cas: 68957-05-1
code: f
= wt: 100.
Ld50 lc50 mixture: not provided
routes of entry: inhalation: yes skin: yes ingestion: no
reports of carcinogenicity: ntp: no iarc: no osha: no
health hazards acute and chronic: target organs: skin, eyes, respiratory
passages at high temperatures (over 250c). Acute effects: possible
skin and eye irritation. Possible respiratory passage irritation at
high temperatures (over 25 0c). Chronic effects: none known.
explanation of carcinogenicity: iarc, ntp, osha do not list nyosil-m25
w/uv dye or its ingredients as carcinogens.
effects of overexposure: not provided
medical cond aggravated by exposure: none known.
First aid: inhalation: move to fresh air and refer to a physician for
treatment. Eye contact: wash thoroughly; contact physician if
irritation persists. Skin contact: wash thoroughly with soap and
water. Ingesti on: not expected to be a problem. However, if
ingested, immediately give 1 to 2 glasses of water and call a
physician. Do not induce vomiting. After first aid, get appropriate
in-plant, paramedic, or community medical support. Avoid
contamination of cigarettes or other tobacco products.
Hcc: v6
nrc/state lic num: not relevant
boiling pt: b.P. Text: not volitile
melt/freeze pt: =-73.C, -99.4f
m.P/f.P text: pour point
decomp temp: decomp text: not provided
vapor pres: negligible
vapor density: >air
spec gravity: 1.03
ph: not relevant
viscosity: not provided
evaporation rate & reference:
solubility in water: insoluble
appearance and odor: water-white, odorless oil.
percent volatiles by volume: none
corrosion rate: not provided
Stability indicator/materials to avoid: yes
strong oxidizing materials
stability condition to avoid: pyrolysis
hazardous decomposition products: thermal oxidative decomposition can
produce carbon monoxide as well as small amounts of other toxic
fumes.
Waste disposal methods: contact a licensed waste-disposal contractor for
detailed recommendations. Many states classify waste oil as
"hazardous", which means disposal only by a licensed firm. Follow
applicable federal, state , and local regulations.
Ingred name: chlorophenylmethylpolysiloxane
cas: 68957-05-1
> wt: 99.
other rec limits: not provided
osha pel: not provided
acgih tlv: not provided